move uboot4extlinux packages to [libre-testing] since it aren't stable yet

author: André Fabian Silva Delgado <emulatorman@parabola.nu> 2016-03-02 00:23:43 -0300
committer: André Fabian Silva Delgado <emulatorman@parabola.nu> 2016-03-02 00:28:07 -0300
commit: 11467233d8b439275ce1e1db650a4c6f91a9db1f (patch)
tree: 62cc14ffe05dcc5541210d2073a4c119e6a125c2 /libre-testing/uboot4extlinux-chiliboard
parent: a44772df880c7bcf6ba114a6e4d86ba4ff6b4adc (diff)
10 files changed, 2562 insertions, 0 deletions
diff --git a/libre-testing/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch b/libre-testing/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
new file mode 100644
index 000000000..bdb6699e6
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
@@ -0,0 +1,93 @@
+From 0a3f119b5221e16feb1cbe4036cc16d1dc4c194c Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 7 Feb 2015 22:52:40 +0100
+Subject: [PATCH 1/6] Add linux/compiler-gcc5.h to fix builds with gcc5
+
+Add linux/compiler-gcc5/h from the kernel sources at:
+
+commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
+Author: Steven Noonan <steven@uplinklabs.net>
+Date:   Sat Oct 25 15:09:42 2014 -0700
+
+    compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 65 insertions(+)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.5.0
+
diff --git a/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
new file mode 100644
index 000000000..6ec3d82fc
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
@@ -0,0 +1,76 @@
+From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Sun, 22 Jun 2014 23:10:39 +0200
+Subject: [PATCH 2/6] ARM:asm:io.h use static inline
+
+When compiling u-boot with W=1 the extern inline void for
+read* is likely causing the most noise. gcc / clang will
+warn there is never a actual declaration for these functions.
+Instead of declaring these extern make them static inline so
+it is actually declared.
+
+cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+---
+ arch/arm/include/asm/io.h | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 214f3ea..dc6138a 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+ #define __arch_putq(v,a)		(*(volatile unsigned long long *)(a) = (v))
+ 
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
++static inline void __raw_writesb(unsigned long addr, const void *data,
+ 				 int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ 		__arch_putb(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
++static inline void __raw_writesw(unsigned long addr, const void *data,
+ 				 int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ 		__arch_putw(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
++static inline void __raw_writesl(unsigned long addr, const void *data,
+ 				 int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ 		__arch_putl(*buf++, addr);
+ }
+ 
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+ 	while(bytelen--)
+ 		*buf++ = __arch_getb(addr);
+ }
+ 
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+ 	while(wordlen--)
+ 		*buf++ = __arch_getw(addr);
+ }
+ 
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
++static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+ 	while(longlen--)
+-- 
+2.5.0
+
diff --git a/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
new file mode 100644
index 000000000..baf1efd5d
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
@@ -0,0 +1,31 @@
+From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Thu, 26 Jun 2014 20:18:31 +0200
+Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak
+
+This not only looks a bit better it also prevents a
+warning with W=1 (no previous prototype).
+
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+Acked-by: Simon Glass <sjg@chromium.org>
+---
+ common/main.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/common/main.c b/common/main.c
+index 32618f1..2979fbe 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+  * Board-specific Platform code can reimplement show_boot_progress () if needed
+  */
+-void inline __show_boot_progress (int val) {}
+-void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
++__weak void show_boot_progress(int val) {}
+ 
+ static void modem_init(void)
+ {
+-- 
+2.5.0
+
diff --git a/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
new file mode 100644
index 000000000..f2237a229
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
@@ -0,0 +1,109 @@
+From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Mon, 23 Jun 2014 23:20:19 +0200
+Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds
+
+First of all this looks a lot better, but it also
+prevents a gcc warning (W=1), that the weak function
+has no previous prototype.
+
+cc: Simon Glass <sjg@chromium.org>
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+Acked-by: Simon Glass <sjg@chromium.org>
+---
+ common/board_f.c     | 29 ++++++++++-------------------
+ include/status_led.h | 22 +++++++++++-----------
+ 2 files changed, 21 insertions(+), 30 deletions(-)
+
+diff --git a/common/board_f.c b/common/board_f.c
+index 4ea4cb2..bdab38e 100644
+--- a/common/board_f.c
++++ b/common/board_f.c
+@@ -37,6 +37,7 @@
+ #include <os.h>
+ #include <post.h>
+ #include <spi.h>
++#include <status_led.h>
+ #include <trace.h>
+ #include <watchdog.h>
+ #include <asm/errno.h>
+@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR;
+  ************************************************************************
+  * May be supplied by boards if desired
+  */
+-inline void __coloured_LED_init(void) {}
+-void coloured_LED_init(void)
+-	__attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
+-void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
+-void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
+-void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
+-void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
+-void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
+-void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
+-void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
+-void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
++__weak void coloured_LED_init(void) {}
++__weak void red_led_on(void) {}
++__weak void red_led_off(void) {}
++__weak void green_led_on(void) {}
++__weak void green_led_off(void) {}
++__weak void yellow_led_on(void) {}
++__weak void yellow_led_off(void) {}
++__weak void blue_led_on(void) {}
++__weak void blue_led_off(void) {}
+ 
+ /*
+  * Why is gd allocated a register? Prior to reloc it might be better to
+diff --git a/include/status_led.h b/include/status_led.h
+index 0eb91b8..b8aaaf7 100644
+--- a/include/status_led.h
++++ b/include/status_led.h
+@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state);
+ # include <asm/status_led.h>
+ #endif
+ 
++#endif	/* CONFIG_STATUS_LED	*/
++
+ /*
+  * Coloured LEDs API
+  */
+ #ifndef	__ASSEMBLY__
+-extern void	coloured_LED_init (void);
+-extern void	red_led_on(void);
+-extern void	red_led_off(void);
+-extern void	green_led_on(void);
+-extern void	green_led_off(void);
+-extern void	yellow_led_on(void);
+-extern void	yellow_led_off(void);
+-extern void	blue_led_on(void);
+-extern void	blue_led_off(void);
++void coloured_LED_init(void);
++void red_led_on(void);
++void red_led_off(void);
++void green_led_on(void);
++void green_led_off(void);
++void yellow_led_on(void);
++void yellow_led_off(void);
++void blue_led_on(void);
++void blue_led_off(void);
+ #else
+ 	.extern LED_init
+ 	.extern red_led_on
+@@ -297,6 +299,4 @@ extern void	blue_led_off(void);
+ 	.extern blue_led_off
+ #endif
+ 
+-#endif	/* CONFIG_STATUS_LED	*/
+-
+ #endif	/* _STATUS_LED_H_	*/
+-- 
+2.5.0
+
diff --git a/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch b/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
new file mode 100644
index 000000000..cbe029a69
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
@@ -0,0 +1,1685 @@
+From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001
+From: Kevin Mihelich <kevin@archlinuxarm.org>
+Date: Sat, 29 Aug 2015 08:56:32 -0600
+Subject: [PATCH 5/6] chiliboard support
+
+---
+ board/grinn/chiliboard/Makefile   |  13 +
+ board/grinn/chiliboard/board.c    | 447 +++++++++++++++++++
+ board/grinn/chiliboard/board.h    |  20 +
+ board/grinn/chiliboard/mux.c      |  99 +++++
+ board/grinn/chiliboard/u-boot.lds | 131 ++++++
+ boards.cfg                        |   5 +
+ drivers/mtd/nand/omap_gpmc.c      |   6 +-
+ include/configs/chiliboard.h      | 878 ++++++++++++++++++++++++++++++++++++++
+ 8 files changed, 1597 insertions(+), 2 deletions(-)
+ create mode 100644 board/grinn/chiliboard/Makefile
+ create mode 100644 board/grinn/chiliboard/board.c
+ create mode 100644 board/grinn/chiliboard/board.h
+ create mode 100644 board/grinn/chiliboard/mux.c
+ create mode 100644 board/grinn/chiliboard/u-boot.lds
+ create mode 100644 include/configs/chiliboard.h
+
+diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile
+new file mode 100644
+index 0000000..804ac37
+--- /dev/null
++++ b/board/grinn/chiliboard/Makefile
+@@ -0,0 +1,13 @@
++#
++# Makefile
++#
++# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
++obj-y	:= mux.o
++endif
++
++obj-y	+= board.o
+diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
+new file mode 100644
+index 0000000..ed8ab63
+--- /dev/null
++++ b/board/grinn/chiliboard/board.c
+@@ -0,0 +1,447 @@
++/*
++ * board.c
++ *
++ * Board functions for Grinn chiliboard, AM335X based boards
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <spl.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/omap.h>
++#include <asm/arch/ddr_defs.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/mmc_host_def.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/mem.h>
++#include <asm/io.h>
++#include <asm/emif.h>
++#include <asm/gpio.h>
++#include <i2c.h>
++#include <miiphy.h>
++#include <cpsw.h>
++#include <power/tps65217.h>
++#include <power/tps65910.h>
++#include <environment.h>
++#include <watchdog.h>
++#include <environment.h>
++#include "board.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++#define HDR_NAME_LEN		8
++
++static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++static const struct ddr_data ddr2_chilisom_gcs1_data = {
++	.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
++			  (MT47H128M16RT25E_RD_DQS<<20) |
++			  (MT47H128M16RT25E_RD_DQS<<10) |
++			  (MT47H128M16RT25E_RD_DQS<<0)),
++	.datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
++			  (MT47H128M16RT25E_WR_DQS<<20) |
++			  (MT47H128M16RT25E_WR_DQS<<10) |
++			  (MT47H128M16RT25E_WR_DQS<<0)),
++	.datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
++			 (MT47H128M16RT25E_PHY_WRLVL<<20) |
++			 (MT47H128M16RT25E_PHY_WRLVL<<10) |
++			 (MT47H128M16RT25E_PHY_WRLVL<<0)),
++	.datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
++			 (MT47H128M16RT25E_PHY_GATELVL<<20) |
++			 (MT47H128M16RT25E_PHY_GATELVL<<10) |
++			 (MT47H128M16RT25E_PHY_GATELVL<<0)),
++	.datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
++			  (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
++			  (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
++			  (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
++	.datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
++			  (MT47H128M16RT25E_PHY_WR_DATA<<20) |
++			  (MT47H128M16RT25E_PHY_WR_DATA<<10) |
++			  (MT47H128M16RT25E_PHY_WR_DATA<<0)),
++};
++
++static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = {
++	.cmd0csratio = MT47H128M16RT25E_RATIO,
++	.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++
++	.cmd1csratio = MT47H128M16RT25E_RATIO,
++	.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++
++	.cmd2csratio = MT47H128M16RT25E_RATIO,
++	.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++};
++
++static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = {
++	.sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
++	.ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
++	.sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
++	.sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
++	.sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
++	.emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
++};
++
++static const struct ddr_data ddr3_chilisom_gcs2_data = {
++	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
++	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
++	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
++	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
++};
++
++static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = {
++	.cmd0csratio = MT41K256M16HA125E_RATIO,
++	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++
++	.cmd1csratio = MT41K256M16HA125E_RATIO,
++	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++
++	.cmd2csratio = MT41K256M16HA125E_RATIO,
++	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++};
++
++static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = {
++	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
++	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
++	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
++	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
++	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
++	.zq_config = MT41K256M16HA125E_ZQ_CFG,
++	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
++};
++
++#ifdef CONFIG_SPL_OS_BOOT
++int spl_start_uboot(void)
++{
++	/* break into full u-boot on 'c' */
++	if (serial_tstc() && serial_getc() == 'c')
++		return 1;
++
++#ifdef CONFIG_SPL_ENV_SUPPORT
++	env_init();
++	env_relocate_spec();
++	if (getenv_yesno("boot_os") != 1)
++		return 1;
++#endif
++
++	return 0;
++}
++#endif
++
++#define OSC	(V_OSCK/1000000)
++const struct dpll_params dpll_ddr_chilisom_gcs1 = {
++		266, OSC-1, 1, -1, -1, -1, -1};
++const struct dpll_params dpll_ddr_chilisom_gcs2 = {
++		400, OSC-1, 1, -1, -1, -1, -1};
++
++void am33xx_spl_board_init(void)
++{
++	int mpu_vdd;
++
++	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
++
++	int usb_cur_lim;
++
++	if (i2c_probe(TPS65217_CHIP_PM))
++		return;
++
++	uchar pmic_status_reg;
++	if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg))
++		return;
++	if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) {
++		puts("No AC power, disabling frequency switch\n");
++		return;
++	}
++
++	/*
++	 * Increase USB current limit to 1300mA or 1800mA and set
++	 * the MPU voltage controller as needed.
++	 */
++	if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
++		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
++		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
++	} else {
++		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
++		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
++	}
++
++	if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
++			       TPS65217_POWER_PATH,
++			       usb_cur_lim,
++			       TPS65217_USB_INPUT_CUR_LIMIT_MASK))
++		puts("tps65217_reg_write failure\n");
++
++	/* Set DCDC3 (CORE) voltage to 1.125V */
++	if (tps65217_voltage_update(TPS65217_DEFDCDC3,
++				    TPS65217_DCDC_VOLT_SEL_1125MV)) {
++		puts("tps65217_voltage_update failure\n");
++		return;
++	}
++
++	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
++	if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
++		puts("tps65217_voltage_update failure\n");
++		return;
++	}
++
++	/* Set LDO3, LDO4 output voltage to 3.3V for GCS1.
++	 * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */
++
++	#ifdef CONFIG_CHILISOM_GCS2
++		if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++				       TPS65217_DEFLS1,
++				       TPS65217_LDO_VOLTAGE_OUT_1_8,
++				       TPS65217_LDO_MASK))
++			puts("tps65217_reg_write failure\n");
++		if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++				       TPS65217_DEFLS2,
++				       TPS65217_LDO_VOLTAGE_OUT_3_3,
++				       TPS65217_LDO_MASK))
++			puts("tps65217_reg_write failure\n");
++	#else
++
++		if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++				       TPS65217_DEFLS1,
++				       TPS65217_LDO_VOLTAGE_OUT_3_3,
++				       TPS65217_LDO_MASK))
++			puts("tps65217_reg_write failure\n");
++		if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++				       TPS65217_DEFLS2,
++				       TPS65217_LDO_VOLTAGE_OUT_3_3,
++				       TPS65217_LDO_MASK))
++			puts("tps65217_reg_write failure\n");
++	#endif
++
++	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
++}
++
++const struct dpll_params *get_dpll_ddr_params(void)
++{
++	enable_i2c0_pin_mux();
++	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
++
++#ifndef CONFIG_CHILISOM_GCS2
++	return &dpll_ddr_chilisom_gcs1;
++#else
++	return &dpll_ddr_chilisom_gcs2;
++#endif
++}
++
++void set_uart_mux_conf(void)
++{
++#ifdef CONFIG_SERIAL1
++	enable_uart0_pin_mux();
++#endif /* CONFIG_SERIAL1 */
++}
++
++void set_mux_conf_regs(void)
++{
++	enable_board_pin_mux();
++}
++
++const struct ctrl_ioregs ioregs_chilisom_gcs1 = {
++	.cm0ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
++	.cm1ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
++	.cm2ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
++	.dt0ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
++	.dt1ioctl		= MT47H128M16RT25E_IOCTRL_VALUE,
++};
++
++const struct ctrl_ioregs ioregs_chilisom_gcs2 = {
++	.cm0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
++	.cm1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
++	.cm2ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
++	.dt0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
++	.dt1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
++};
++
++void sdram_init(void)
++{
++#ifndef CONFIG_CHILISOM_GCS2
++	config_ddr(266, &ioregs_chilisom_gcs1,
++		   &ddr2_chilisom_gcs1_data,
++		   &ddr2_chilisom_gcs1_cmd_ctrl_data,
++		   &ddr2_chilisom_gcs1_emif_reg_data, 0);
++#else
++	config_ddr(400, &ioregs_chilisom_gcs2,
++		   &ddr3_chilisom_gcs2_data,
++		   &ddr3_chilisom_gcs2_cmd_ctrl_data,
++		   &ddr3_chilisom_gcs2_emif_reg_data, 0);
++#endif
++}
++#endif
++
++/*
++ * Basic board specific setup.  Pinmux has been handled already.
++ */
++int board_init(void)
++{
++#if defined(CONFIG_HW_WATCHDOG)
++	hw_watchdog_init();
++#endif
++
++	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
++#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
++	gpmc_init();
++#endif
++	return 0;
++}
++
++#ifdef CONFIG_BOARD_LATE_INIT
++int board_late_init(void)
++{
++#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
++	char safe_string[HDR_NAME_LEN + 1];
++
++	/* Now set variables based on the header. */
++	strncpy(safe_string, (char *)"CHILISOM", 8);
++	safe_string[8] = 0;
++	setenv("board_name", safe_string);
++
++#ifndef CONFIG_CHILISOM_GCS2
++	strncpy(safe_string, (char *)"1.1", 3);
++	safe_string[3] = 0;
++	setenv("board_rev", safe_string);
++#else
++	strncpy(safe_string, (char *)"2.2", 3);
++	safe_string[3] = 0;
++	setenv("board_rev", safe_string);
++#endif
++#endif
++	return 0;
++}
++#endif
++
++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
++	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
++static void cpsw_control(int enabled)
++{
++	/* VTP can be added here */
++
++	return;
++}
++
++static struct cpsw_slave_data cpsw_slaves[] = {
++	{
++		.slave_reg_ofs	= 0x208,
++		.sliver_reg_ofs	= 0xd80,
++		.phy_addr	= 0,
++	},
++	{
++		.slave_reg_ofs	= 0x308,
++		.sliver_reg_ofs	= 0xdc0,
++		.phy_addr	= 1,
++	},
++};
++
++static struct cpsw_platform_data cpsw_data = {
++	.mdio_base		= CPSW_MDIO_BASE,
++	.cpsw_base		= CPSW_BASE,
++	.mdio_div		= 0xff,
++	.channels		= 8,
++	.cpdma_reg_ofs		= 0x800,
++	.slaves			= 1,
++	.slave_data		= cpsw_slaves,
++	.ale_reg_ofs		= 0xd00,
++	.ale_entries		= 1024,
++	.host_port_reg_ofs	= 0x108,
++	.hw_stats_reg_ofs	= 0x900,
++	.bd_ram_ofs		= 0x2000,
++	.mac_control		= (1 << 5),
++	.control		= cpsw_control,
++	.host_port_num		= 0,
++	.version		= CPSW_CTRL_VERSION_2,
++};
++#endif
++
++/*
++ * This function will:
++ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
++ * in the environment
++ * Perform fixups to the PHY present on certain boards.  We only need this
++ * function in:
++ * - SPL with either CPSW or USB ethernet support
++ * - Full U-Boot, with either CPSW or USB ethernet
++ * Build in only these cases to avoid warnings about unused variables
++ * when we build an SPL that has neither option but full U-Boot will.
++ */
++
++#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
++		&& defined(CONFIG_SPL_BUILD)) || \
++	((defined(CONFIG_DRIVER_TI_CPSW) || \
++	  defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
++	 !defined(CONFIG_SPL_BUILD))
++int board_eth_init(bd_t *bis)
++{
++	int rv, n = 0;
++	uint8_t mac_addr[6];
++	uint32_t mac_hi, mac_lo;
++
++	/* try reading mac address from efuse */
++	mac_lo = readl(&cdev->macid0l);
++	mac_hi = readl(&cdev->macid0h);
++	mac_addr[0] = mac_hi & 0xFF;
++	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
++	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
++	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
++	mac_addr[4] = mac_lo & 0xFF;
++	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
++
++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
++	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
++	if (!getenv("ethaddr")) {
++		printf("<ethaddr> not set. Validating first E-fuse MAC\n");
++
++		if (is_valid_ether_addr(mac_addr))
++			eth_setenv_enetaddr("ethaddr", mac_addr);
++	}
++
++#ifdef CONFIG_DRIVER_TI_CPSW
++
++	mac_lo = readl(&cdev->macid1l);
++	mac_hi = readl(&cdev->macid1h);
++	mac_addr[0] = mac_hi & 0xFF;
++	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
++	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
++	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
++	mac_addr[4] = mac_lo & 0xFF;
++	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
++
++	if (!getenv("eth1addr")) {
++		if (is_valid_ether_addr(mac_addr))
++			eth_setenv_enetaddr("eth1addr", mac_addr);
++	}
++
++	/* writel(MII_MODE_ENABLE, &cdev->miisel); */
++	writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
++
++	cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
++
++	rv = cpsw_register(&cpsw_data);
++	if (rv < 0)
++		printf("Error %d registering CPSW switch\n", rv);
++	else
++		n += rv;
++#endif
++#endif
++#if defined(CONFIG_USB_ETHER) && \
++	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
++	if (is_valid_ether_addr(mac_addr))
++		eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
++
++	rv = usb_eth_initialize(bis);
++	if (rv < 0)
++		printf("Error %d registering USB_ETHER\n", rv);
++	else
++		n += rv;
++#endif
++	return n;
++}
++#endif
+diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h
+new file mode 100644
+index 0000000..6753e74
+--- /dev/null
++++ b/board/grinn/chiliboard/board.h
+@@ -0,0 +1,20 @@
++/*
++ * board.h
++ *
++ * Grinn AM335x boards information header
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _BOARD_H_
++#define _BOARD_H_
++
++void enable_uart0_pin_mux(void);
++void enable_i2c0_pin_mux(void);
++void enable_board_pin_mux(void);
++#endif
+diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c
+new file mode 100644
+index 0000000..644f211
+--- /dev/null
++++ b/board/grinn/chiliboard/mux.c
+@@ -0,0 +1,99 @@
++/*
++ * mux.c
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/mux.h>
++#include <asm/io.h>
++#include <i2c.h>
++#include "board.h"
++
++static struct module_pin_mux uart0_pin_mux[] = {
++	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
++	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
++	{-1},
++};
++
++static struct module_pin_mux mmc0_pin_mux[] = {
++	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
++	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
++	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
++	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
++	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
++	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
++	{-1},
++};
++
++static struct module_pin_mux i2c0_pin_mux[] = {
++	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
++			PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
++	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
++			PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
++	{-1},
++};
++
++static struct module_pin_mux rmii1_pin_mux[] = {
++	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS */
++	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
++	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
++	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
++	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
++	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
++	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
++	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
++	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
++	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_REFCLK */
++	{-1},
++};
++
++static struct module_pin_mux nand_pin_mux[] = {
++	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
++	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
++	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
++	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
++	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
++	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
++	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
++	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
++	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
++	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
++	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
++	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
++	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
++	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
++	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
++	{-1},
++};
++
++void enable_uart0_pin_mux(void)
++{
++	configure_module_pin_mux(uart0_pin_mux);
++}
++
++void enable_i2c0_pin_mux(void)
++{
++	configure_module_pin_mux(i2c0_pin_mux);
++}
++
++void enable_board_pin_mux(void)
++{
++	/* chiliboard pinmux */
++	configure_module_pin_mux(rmii1_pin_mux);
++	configure_module_pin_mux(nand_pin_mux);
++	configure_module_pin_mux(mmc0_pin_mux);
++
++#ifndef CONFIG_CHILISOM_GCS2
++	puts("Configuration for Chilisom GCS1\n");
++#else
++	puts("Configuration for Chilisom GCS2\n");
++#endif
++}
+diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds
+new file mode 100644
+index 0000000..bf70d88
+--- /dev/null
++++ b/board/grinn/chiliboard/u-boot.lds
+@@ -0,0 +1,131 @@
++/*
++ * Copyright (c) 2004-2008 Texas Instruments
++ *
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++	. = 0x00000000;
++
++	. = ALIGN(4);
++	.text :
++	{
++		*(.__image_copy_start)
++		*(.vectors)
++		CPUDIR/start.o (.text*)
++		board/grinn/chiliboard/built-in.o (.text*)
++		*(.text*)
++	}
++
++	. = ALIGN(4);
++	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
++
++	. = ALIGN(4);
++	.data : {
++		*(.data*)
++	}
++
++	. = ALIGN(4);
++
++	. = .;
++
++	. = ALIGN(4);
++	.u_boot_list : {
++		KEEP(*(SORT(.u_boot_list*)));
++	}
++
++	. = ALIGN(4);
++
++	.image_copy_end :
++	{
++		*(.__image_copy_end)
++	}
++
++	.rel_dyn_start :
++	{
++		*(.__rel_dyn_start)
++	}
++
++	.rel.dyn : {
++		*(.rel*)
++	}
++
++	.rel_dyn_end :
++	{
++		*(.__rel_dyn_end)
++	}
++
++	.hash : { *(.hash*) }
++
++	.end :
++	{
++		*(.__end)
++	}
++
++	_image_binary_end = .;
++
++	/*
++	 * Deprecated: this MMU section is used by pxa at present but
++	 * should not be used by new boards/CPUs.
++	 */
++	. = ALIGN(4096);
++	.mmutable : {
++		*(.mmutable)
++	}
++
++/*
++ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
++ * __bss_base and __bss_limit are for linker only (overlay ordering)
++ */
++
++	.bss_start __rel_dyn_start (OVERLAY) : {
++		KEEP(*(.__bss_start));
++		__bss_base = .;
++	}
++
++	.bss __bss_base (OVERLAY) : {
++		*(.bss*)
++		 . = ALIGN(4);
++		 __bss_limit = .;
++	}
++
++	.bss_end __bss_limit (OVERLAY) : {
++		KEEP(*(.__bss_end));
++	}
++
++	.dynsym _image_binary_end : { *(.dynsym) }
++	.dynbss : { *(.dynbss) }
++	.dynstr : { *(.dynstr*) }
++	.dynamic : { *(.dynamic*) }
++	.gnu.hash : { *(.gnu.hash) }
++	.plt : { *(.plt*) }
++	.interp : { *(.interp*) }
++	.gnu : { *(.gnu*) }
++	.ARM.exidx : { *(.ARM.exidx*) }
++}
+diff --git a/boards.cfg b/boards.cfg
+index 1ba2081..b432704 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -258,6 +258,11 @@ Active  arm         armv7          am33xx      BuR             tseries
+ Active  arm         armv7          am33xx      BuR             tseries             tseries_nand                          tseries:SERIAL1,CONS_INDEX=1,NAND                                                                                                 Hannes Petermaier <hannes.petermaier@br-automation.com>
+ Active  arm         armv7          am33xx      BuR             tseries             tseries_spi                           tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT                                                                                   Hannes Petermaier <hannes.petermaier@br-automation.com>
+ Active  arm         armv7          am33xx      compulab        cm_t335             cm_t335                               -                                                                                                                                 Igor Grinberg <grinberg@compulab.co.il>
++Active  arm         armv7          am33xx      grinn           chiliboard          chiliboard_ram128m                    chiliboard:CHILISOM_GCS2,NAND,RAM128MB                                                                                            Grzegorz Glomb <g.glomb@grinn-global.com>
++Active  arm         armv7          am33xx      grinn           chiliboard          chiliboard_nand0m_ram128m             chiliboard:CHILISOM_GCS2,RAM128MB                                                                                                 Grzegorz Glomb <g.glomb@grinn-global.com>
++Active  arm         armv7          am33xx      grinn           chiliboard          chiliboard_nand512m                   chiliboard:CHILISOM_GCS2,NAND,NAND512MB                                                                                           Grzegorz Glomb <g.glomb@grinn-global.com>
++Active  arm         armv7          am33xx      grinn           chiliboard          chiliboard_nand0m                     chiliboard:CHILISOM_GCS2                                                                                                          Grzegorz Glomb <g.glomb@grinn-global.com>
++Active  arm         armv7          am33xx      grinn           chiliboard          chiliboard                            chiliboard:CHILISOM_GCS2,NAND                                                                                                     Grzegorz Glomb <g.glomb@grinn-global.com>
+ Active  arm         armv7          am33xx      gumstix         pepper              pepper                                -                                                                                                                                 Ash Charles <ash@gumstix.com>
+ Active  arm         armv7          am33xx      isee            igep0033            am335x_igep0033                       -                                                                                                                                 Enric Balletbo i Serra <eballetbo@iseebcn.com>
+ Active  arm         armv7          am33xx      phytec          pcm051              pcm051_rev1                           pcm051:REV1                                                                                                                       Lars Poeschel <poeschel@lemonage.de>
+diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
+index 1acf06b..0c9cde3 100644
+--- a/drivers/mtd/nand/omap_gpmc.c
++++ b/drivers/mtd/nand/omap_gpmc.c
+@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ 				oob += eccbytes) {
+ 		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ 		/* read data */
+-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page);
++		/* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */
++		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
+ 		chip->read_buf(mtd, p, eccsize);
+ 
+ 		/* read respective ecc from oob area */
+-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page);
++		/* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */
++		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+ 		chip->read_buf(mtd, oob, eccbytes);
+ 		/* read syndrome */
+ 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
+new file mode 100644
+index 0000000..eacc9af
+--- /dev/null
++++ b/include/configs/chiliboard.h
+@@ -0,0 +1,878 @@
++/*
++ * chiliboard.h
++ *
++ * Grinn chiliboard configuration header
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __CONFIG_CHILIBOARD_H
++#define __CONFIG_CHILIBOARD_H
++
++#define CONFIG_AM33XX
++#define CONFIG_ARCH_CPU_INIT
++#define CONFIG_SYS_CACHELINE_SIZE       64
++#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
++#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
++#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
++
++#include <asm/arch/omap.h>
++
++/* NS16550 Configuration */
++#define CONFIG_SYS_NS16550
++#define CONFIG_SYS_NS16550_SERIAL
++#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
++#define CONFIG_SYS_NS16550_CLK		48000000
++
++/* Network defines. */
++#define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
++#define CONFIG_BOOTP_DNS2
++#define CONFIG_BOOTP_SEND_HOSTNAME
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_SUBNETMASK
++#define CONFIG_NET_RETRY_COUNT         10
++#define CONFIG_CMD_PING
++#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
++#define CONFIG_MII			/* Required in net/eth.c */
++
++/*
++ * RTC related defines. To use bootcount you must set bootlimit in the
++ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
++ * in the board config.
++ */
++#define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
++
++/* Enable the HW watchdog, since we can use this with bootcount */
++#define CONFIG_HW_WATCHDOG
++#define CONFIG_OMAP_WATCHDOG
++
++/*
++ * SPL related defines.  The Public RAM memory map the ROM defines the
++ * area between 0x402F0400 and 0x4030B800 as a download area and
++ * 0x4030B800 to 0x4030CE00 as a public stack area.  The ROM also
++ * supports X-MODEM loading via UART, and we leverage this and then use
++ * Y-MODEM to load u-boot.img, when booted over UART.
++ */
++#define CONFIG_SPL_TEXT_BASE		0x402F0400
++#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
++#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
++					 (128 << 20))
++
++/* Enable the watchdog inside of SPL */
++#define CONFIG_SPL_WATCHDOG_SUPPORT
++
++/*
++ * Since SPL did pll and ddr initialization for us,
++ * we don't need to do it twice.
++ */
++#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/*
++ * When building U-Boot such that there is no previous loader
++ * we need to call board_early_init_f.  This is taken care of in
++ * s_init when we have SPL used.
++ */
++#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
++#define CONFIG_BOARD_EARLY_INIT_F
++#endif
++
++#ifdef CONFIG_NAND
++#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
++#endif
++
++/* Common define for many platforms. */
++#define CONFIG_OMAP
++#define CONFIG_OMAP_COMMON
++#define CONFIG_SYS_GENERIC_BOARD
++
++/*
++ * We typically do not contain NOR flash.  In the cases where we do, we
++ * undefine this later.
++ */
++#define CONFIG_SYS_NO_FLASH
++
++/* Support both device trees and ATAGs. */
++#define CONFIG_OF_LIBFDT
++#define CONFIG_CMDLINE_TAG
++#define CONFIG_SETUP_MEMORY_TAGS
++#define CONFIG_INITRD_TAG
++
++/*
++ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
++ * relocated itself to higher in memory by the time this value is used.
++ * However, set this to a 32MB offset to allow for easier Linux kernel
++ * booting as the default is often used as the kernel load address.
++ */
++#define CONFIG_SYS_LOAD_ADDR		0x82000000
++
++/*
++ * We setup defaults based on constraints from the Linux kernel, which should
++ * also be safe elsewhere.  We have the default load at 32MB into DDR (for
++ * the kernel), FDT above 128MB (the maximum location for the end of the
++ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
++ * seen large trees).  We say all of this must be within the first 256MB
++ * as that will normally be within the kernel lowmem and thus visible via
++ * bootm_size and we only run on platforms with 256MB or more of memory.
++ */
++#ifdef CONFIG_RAM128MB
++#define DEFAULT_LINUX_BOOT_ENV \
++	"loadaddr=0x82000000\0" \
++	"kernel_addr_r=0x82000000\0" \
++	"fdtaddr=0x84000000\0" \
++	"fdt_addr_r=0x84000000\0" \
++	"rdaddr=0x84080000\0" \
++	"ramdisk_addr_r=0x84080000\0" \
++	"bootm_size=0x8000000\0"
++#else
++#define DEFAULT_LINUX_BOOT_ENV \
++	"loadaddr=0x82000000\0" \
++	"kernel_addr_r=0x82000000\0" \
++	"fdtaddr=0x88000000\0" \
++	"fdt_addr_r=0x88000000\0" \
++	"rdaddr=0x88080000\0" \
++	"ramdisk_addr_r=0x88080000\0" \
++	"bootm_size=0x10000000\0"
++#endif
++
++/*
++ * Default to a quick boot delay.
++ */
++#define CONFIG_BOOTDELAY		1
++
++/*
++ * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
++ * we say (for simplicity) that we have 1 bank, always, even when
++ * we have more.  We always start at 0x80000000, and we place the
++ * initial stack pointer in our SRAM. Otherwise, we can define
++ * CONFIG_NR_DRAM_BANKS before including this file.
++ */
++#ifndef CONFIG_NR_DRAM_BANKS
++#define CONFIG_NR_DRAM_BANKS		1
++#endif
++#define CONFIG_SYS_SDRAM_BASE		0x80000000
++#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
++						GENERATED_GBL_DATA_SIZE)
++
++/* Timer information. */
++#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
++
++/* I2C IP block */
++#define CONFIG_I2C
++#define CONFIG_CMD_I2C
++#define CONFIG_SYS_I2C
++#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
++#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
++#define CONFIG_SYS_I2C_OMAP24XX
++
++/* MMC/SD IP block */
++#define CONFIG_MMC
++#define CONFIG_GENERIC_MMC
++#define CONFIG_OMAP_HSMMC
++#define CONFIG_CMD_MMC
++
++/* McSPI IP block */
++#define CONFIG_SPI
++#define CONFIG_OMAP3_SPI
++#define CONFIG_CMD_SPI
++
++/* GPIO block */
++#define CONFIG_OMAP_GPIO
++#define CONFIG_CMD_GPIO
++
++/*
++ * GPMC NAND block.  We support 1 device and the physical address to
++ * access CS0 at is 0x8000000.
++ */
++#ifdef CONFIG_NAND
++#define CONFIG_NAND_OMAP_GPMC
++#ifndef CONFIG_SYS_NAND_BASE
++#define CONFIG_SYS_NAND_BASE		0x8000000
++#endif
++#define CONFIG_SYS_MAX_NAND_DEVICE	1
++#define CONFIG_CMD_NAND
++#endif
++
++/*
++ * The following are general good-enough settings for U-Boot.  We set a
++ * large malloc pool as we generally have a lot of DDR, and we opt for
++ * function over binary size in the main portion of U-Boot as this is
++ * generally easily constrained later if needed.  We enable the config
++ * options that give us information in the environment about what board
++ * we are on so we do not need to rely on the command prompt.  We set a
++ * console baudrate of 115200 and use the default baud rate table.
++ */
++#define CONFIG_SYS_MALLOC_LEN		(16 << 20)
++#define CONFIG_SYS_HUSH_PARSER
++#define CONFIG_SYS_PROMPT		"U-Boot# "
++#define CONFIG_SYS_CONSOLE_INFO_QUIET
++#define CONFIG_BAUDRATE			115200
++#define CONFIG_ENV_VARS_UBOOT_CONFIG	/* Strongly encouraged */
++#define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
++
++/* As stated above, the following choices are optional. */
++#define CONFIG_SYS_LONGHELP
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_CMDLINE_EDITING
++#define CONFIG_VERSION_VARIABLE
++
++/* We set the max number of command args high to avoid HUSH bugs. */
++#define CONFIG_SYS_MAXARGS		64
++
++/* Console I/O Buffer Size */
++#define CONFIG_SYS_CBSIZE		512
++/* Print Buffer Size */
++#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
++					+ sizeof(CONFIG_SYS_PROMPT) + 16)
++/* Boot Argument Buffer Size */
++#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
++
++/*
++ * When we have SPI, NOR or NAND flash we expect to be making use of
++ * mtdparts, both for ease of use in U-Boot and for passing information
++ * on to the Linux kernel.
++ */
++#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
++#define CONFIG_MTD_DEVICE		/* Required for mtdparts */
++#define CONFIG_CMD_MTDPARTS
++#endif
++
++/*
++ * For commands to use, we take the default list and add a few other
++ * useful commands.  Note that we must have set CONFIG_SYS_NO_FLASH
++ * prior to this include, in order to skip a few commands.  When we do
++ * have flash, if we expect these commands they must be enabled in that
++ * config.  If desired, a specific list of desired commands can be used
++ * instead.
++ */
++#include <config_cmd_default.h>
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_ECHO
++#define CONFIG_CMD_BOOTZ
++
++/*
++ * Common filesystems support.  When we have removable storage we
++ * enabled a number of useful commands and support.
++ */
++#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
++#define CONFIG_DOS_PARTITION
++#define CONFIG_CMD_FAT
++#define CONFIG_FAT_WRITE
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_EXT4
++#define CONFIG_CMD_FS_GENERIC
++#endif
++
++/*
++ * Our platforms make use of SPL to initalize the hardware (primarily
++ * memory) enough for full U-Boot to be loaded.  We also support Falcon
++ * Mode so that the Linux kernel can be booted directly from SPL
++ * instead, if desired.  We make use of the general SPL framework found
++ * under common/spl/.  Given our generally common memory map, we set a
++ * number of related defaults and sizes here.
++ */
++#if !defined(CONFIG_NOR_BOOT) && \
++	!(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
++#define CONFIG_SPL
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_OS_BOOT
++
++/*
++ * Place the image at the start of the ROM defined image space.
++ * We limit our size to the ROM-defined downloaded image area, and use the
++ * rest of the space for stack.  We load U-Boot itself into memory at
++ * 0x80800000 for legacy reasons (to not conflict with older SPLs).  We
++ * have our BSS be placed 1MiB after this, to allow for the default
++ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
++ * We have the SPL malloc pool at the end of the BSS area.
++ */
++#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
++#ifndef CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_TEXT_BASE		0x80800000
++#endif
++#ifndef CONFIG_SPL_BSS_START_ADDR
++#define CONFIG_SPL_BSS_START_ADDR	0x80a00000
++#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
++#endif
++#ifndef CONFIG_SYS_SPL_MALLOC_START
++#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
++					 CONFIG_SPL_BSS_MAX_SIZE)
++#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
++#endif
++
++/* RAW SD card / eMMC locations. */
++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
++
++/* FAT sd card locations. */
++#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
++#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++
++#ifdef CONFIG_SPL_OS_BOOT
++/* FAT */
++#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
++#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
++
++/* RAW SD card / eMMC */
++#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
++
++/* NAND */
++#ifdef CONFIG_NAND
++#define CONFIG_CMD_SPL_NAND_OFS			0x240000 /* end of u-boot */
++#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x280000
++#define CONFIG_CMD_SPL_WRITE_SIZE		0x2000
++#endif
++
++/* spl export command */
++#define CONFIG_CMD_SPL
++#endif
++
++#ifdef CONFIG_MMC
++#define CONFIG_SPL_LIBDISK_SUPPORT
++#define CONFIG_SPL_MMC_SUPPORT
++#define CONFIG_SPL_FAT_SUPPORT
++#endif
++
++/* General parts of the framework, required. */
++#define CONFIG_SPL_I2C_SUPPORT
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_GPIO_SUPPORT
++#define CONFIG_SPL_BOARD_INIT
++
++#ifdef CONFIG_NAND
++#define CONFIG_SPL_NAND_SUPPORT
++#define CONFIG_SPL_NAND_BASE
++#define CONFIG_SPL_NAND_DRIVERS
++#define CONFIG_SPL_NAND_ECC
++#define CONFIG_SPL_MTD_SUPPORT
++#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
++/* #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000 */ /* Defined later in this configuration */
++#endif
++#endif /* !CONFIG_NOR_BOOT */
++
++#ifndef CONFIG_SPL_BUILD
++# define CONFIG_FIT
++# define CONFIG_TIMESTAMP
++# define CONFIG_LZO
++# ifdef CONFIG_ENABLE_VBOOT
++#  define CONFIG_OF_CONTROL
++#  define CONFIG_OF_SEPARATE
++#  define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard
++#  define CONFIG_FIT_SIGNATURE
++#  define CONFIG_RSA
++# endif
++#endif
++
++#define CONFIG_SYS_BOOTM_LEN		(16 << 20)
++
++#define CONFIG_BOARD_LATE_INIT
++
++#define CONFIG_SERIAL1			1
++#define CONFIG_CONS_INDEX		1
++
++/* Clock Defines */
++#define V_OSCK				24000000  /* Clock output from T2 */
++#define V_SCLK				(V_OSCK)
++
++/* Custom script for NOR */
++#define CONFIG_SYS_LDSCRIPT		"board/grinn/chiliboard/u-boot.lds"
++
++/* Always 128 KiB env size */
++#define CONFIG_ENV_SIZE			(128 << 10)
++
++/* Enhance our eMMC support / experience. */
++#define CONFIG_CMD_GPT
++#define CONFIG_EFI_PARTITION
++#define CONFIG_PARTITION_UUIDS
++#define CONFIG_CMD_PART
++
++#ifdef CONFIG_NAND
++#ifndef CONFIG_NAND512MB
++#define NANDARGS \
++	"mtdids=" MTDIDS_DEFAULT "\0" \
++	"mtdparts=" MTDPARTS_DEFAULT "\0" \
++	"nandargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${nandroot} " \
++		"rootfstype=${nandrootfstype}\0" \
++	"nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
++	"nandrootfstype=ubifs rootwait=1\0" \
++	"nandboot=echo Booting from nand ...; " \
++		"run nandargs; " \
++		"nand read ${fdtaddr} u-boot-spl-os; " \
++		"nand read ${loadaddr} kernel; " \
++		"bootz ${loadaddr} - ${fdtaddr}\0"
++#else
++#define NANDARGS \
++	"mtdids=" MTDIDS_DEFAULT "\0" \
++	"mtdparts=" MTDPARTS_DEFAULT "\0" \
++	"nandargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${nandroot} " \
++		"rootfstype=${nandrootfstype}\0" \
++	"nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \
++	"nandrootfstype=ubifs rootwait=1\0" \
++	"nandboot=echo Booting from nand ...; " \
++		"run nandargs; " \
++		"nand read ${fdtaddr} u-boot-spl-os; " \
++		"nand read ${loadaddr} kernel; " \
++		"bootz ${loadaddr} - ${fdtaddr}\0"
++#endif
++#else
++#define NANDARGS ""
++#endif
++
++#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
++
++#ifndef CONFIG_SPL_BUILD
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	DEFAULT_LINUX_BOOT_ENV \
++	"boot_fdt=try\0" \
++	"bootpart=0:2\0" \
++	"bootdir=/boot\0" \
++	"bootfile=zImage\0" \
++	"fdtfile=undefined\0" \
++	"console=ttyO0,115200n8\0" \
++	"partitions=" \
++		"uuid_disk=${uuid_gpt_disk};" \
++		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
++	"optargs=\0" \
++	"mmcdev=0\0" \
++	"mmcroot=/dev/mmcblk0p2 rw\0" \
++	"mmcrootfstype=ext4 rootwait\0" \
++	"rootpath=/export/rootfs\0" \
++	"nfsopts=nolock\0" \
++	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
++		"::off\0" \
++	"ramroot=/dev/ram0 rw\0" \
++	"ramrootfstype=ext2\0" \
++	"mmcargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${mmcroot} " \
++		"rootfstype=${mmcrootfstype}\0" \
++	"spiroot=/dev/mtdblock4 rw\0" \
++	"spirootfstype=jffs2\0" \
++	"spisrcaddr=0xe0000\0" \
++	"spiimgsize=0x362000\0" \
++	"spibusno=0\0" \
++	"spiargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${spiroot} " \
++		"rootfstype=${spirootfstype}\0" \
++	"netargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=/dev/nfs " \
++		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
++		"ip=dhcp\0" \
++	"bootenv=uEnv.txt\0" \
++	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
++	"importbootenv=echo Importing environment from mmc ...; " \
++		"env import -t $loadaddr $filesize\0" \
++	"ramargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${ramroot} " \
++		"rootfstype=${ramrootfstype}\0" \
++	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
++	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
++	"mmcloados=run mmcargs; " \
++		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
++			"if run loadfdt; then " \
++				"bootz ${loadaddr} - ${fdtaddr}; " \
++			"else " \
++				"if test ${boot_fdt} = try; then " \
++					"bootz; " \
++				"else " \
++					"echo WARN: Cannot load the DT; " \
++				"fi; " \
++			"fi; " \
++		"else " \
++			"bootz; " \
++		"fi;\0" \
++	"mmcboot=mmc dev ${mmcdev}; " \
++		"if mmc rescan; then " \
++			"echo SD/MMC found on device ${mmcdev};" \
++			"if run loadbootenv; then " \
++				"echo Loaded environment from ${bootenv};" \
++				"run importbootenv;" \
++			"fi;" \
++			"if test -n $uenvcmd; then " \
++				"echo Running uenvcmd ...;" \
++				"run uenvcmd;" \
++			"fi;" \
++			"if run loadimage; then " \
++				"run mmcloados;" \
++			"fi;" \
++		"fi;\0" \
++	"spiboot=echo Booting from spi ...; " \
++		"run spiargs; " \
++		"sf probe ${spibusno}:0; " \
++		"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
++		"bootz ${loadaddr}\0" \
++	"netboot=echo Booting from network ...; " \
++		"setenv autoload no; " \
++		"dhcp; " \
++		"tftp ${loadaddr} ${bootfile}; " \
++		"tftp ${fdtaddr} ${fdtfile}; " \
++		"run netargs; " \
++		"bootz ${loadaddr} - ${fdtaddr}\0" \
++	"ramboot=echo Booting from ramdisk ...; " \
++		"run ramargs; " \
++		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
++	"findfdt="\
++		"setenv fdtfile am335x-chiliboard.dtb;\0" \
++	NANDARGS \
++	DFUARGS
++#endif
++
++#define CONFIG_BOOTCOMMAND \
++	"run findfdt; " \
++	"run mmcboot;" \
++	"setenv mmcdev 1; " \
++	"setenv bootpart 1:2; " \
++	"run mmcboot;" \
++	"run nandboot;"
++
++/* NS16550 Configuration */
++#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
++#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
++#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
++#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
++#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
++#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
++#define CONFIG_BAUDRATE			115200
++
++/*
++#define CONFIG_CMD_EEPROM
++#define CONFIG_ENV_EEPROM_IS_ON_I2C
++#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
++#define CONFIG_SYS_I2C_MULTI_EEPROMS
++*/
++
++/* PMIC support */
++#define CONFIG_POWER_TPS65217
++/* #define CONFIG_POWER_TPS65910 */
++
++/* SPL */
++#ifndef CONFIG_NOR_BOOT
++#define CONFIG_SPL_POWER_SUPPORT
++#define CONFIG_SPL_YMODEM_SUPPORT
++
++/* Bootcount using the RTC block */
++#define CONFIG_BOOTCOUNT_LIMIT
++#define CONFIG_BOOTCOUNT_AM33XX
++
++/* USB gadget RNDIS */
++#define CONFIG_SPL_MUSB_NEW_SUPPORT
++
++/* General network SPL, both CPSW and USB gadget RNDIS */
++#define CONFIG_SPL_NET_SUPPORT
++#define CONFIG_SPL_ENV_SUPPORT
++#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
++
++#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
++
++#ifdef CONFIG_NAND
++#define CONFIG_NAND_OMAP_GPMC
++#define CONFIG_NAND_OMAP_ELM
++#define CONFIG_SYS_NAND_5_ADDR_CYCLE
++#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
++					 CONFIG_SYS_NAND_PAGE_SIZE)
++
++#ifndef CONFIG_NAND512MB
++#define CONFIG_SYS_NAND_PAGE_SIZE	2048
++#define CONFIG_SYS_NAND_OOBSIZE		64
++#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
++					 10, 11, 12, 13, 14, 15, 16, 17, \
++					 18, 19, 20, 21, 22, 23, 24, 25, \
++					 26, 27, 28, 29, 30, 31, 32, 33, \
++					 34, 35, 36, 37, 38, 39, 40, 41, \
++					 42, 43, 44, 45, 46, 47, 48, 49, \
++					 50, 51, 52, 53, 54, 55, 56, 57, }
++
++#define CONFIG_SYS_NAND_ECCSIZE		512
++#define CONFIG_SYS_NAND_ECCBYTES	14
++#define CONFIG_SYS_NAND_ONFI_DETECTION
++#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
++#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
++#else
++#define CONFIG_SYS_NAND_PAGE_SIZE	4096
++#define CONFIG_SYS_NAND_OOBSIZE		224
++#define CONFIG_SYS_NAND_BLOCK_SIZE	(256*1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_ECCPOS {\
++				2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
++				16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\
++				28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\
++				40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\
++				52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\
++				64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\
++				76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\
++				88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\
++				100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\
++				110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\
++				120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\
++				130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\
++				140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\
++				150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\
++				160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\
++				170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\
++				180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\
++				190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\
++				200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
++
++#define CONFIG_SYS_NAND_ECCSIZE		512
++#define CONFIG_SYS_NAND_ECCBYTES	26
++#define CONFIG_SYS_NAND_ONFI_DETECTION
++#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
++#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x100000
++#endif
++
++#endif
++#endif
++
++/*
++ * For NOR boot, we must set this to the start of where NOR is mapped
++ * in memory.
++ */
++#ifdef CONFIG_NOR_BOOT
++#define CONFIG_SYS_TEXT_BASE		0x08000000
++#endif
++
++/*
++ * USB configuration.  We enable MUSB support, both for host and for
++ * gadget.  We set USB0 as peripheral and USB1 as host, based on the
++ * board schematic and physical port wired to each.  Then for host we
++ * add mass storage support and for gadget we add both RNDIS ethernet
++ * and DFU.
++ */
++#define CONFIG_USB_MUSB_DSPS
++#define CONFIG_ARCH_MISC_INIT
++#define CONFIG_MUSB_GADGET
++#define CONFIG_MUSB_PIO_ONLY
++#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
++#define CONFIG_USB_GADGET
++#define CONFIG_USBDOWNLOAD_GADGET
++#define CONFIG_USB_GADGET_DUALSPEED
++#define CONFIG_USB_GADGET_VBUS_DRAW	2
++#define CONFIG_MUSB_HOST
++#define CONFIG_AM335X_USB0
++#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
++#define CONFIG_AM335X_USB1
++#define CONFIG_AM335X_USB1_MODE MUSB_HOST
++
++#ifdef CONFIG_MUSB_HOST
++#define CONFIG_CMD_USB
++#define CONFIG_USB_STORAGE
++#endif
++
++#ifdef CONFIG_MUSB_GADGET
++#define CONFIG_USB_ETHER
++#define CONFIG_USB_ETH_RNDIS
++#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
++
++/* USB TI's IDs */
++#define CONFIG_G_DNL_VENDOR_NUM 0x0403
++#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
++#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
++#endif /* CONFIG_MUSB_GADGET */
++
++#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
++/* disable host part of MUSB in SPL */
++#undef CONFIG_MUSB_HOST
++/* disable EFI partitions and partition UUID support */
++#undef CONFIG_PARTITION_UUIDS
++#undef CONFIG_EFI_PARTITION
++/*
++ * Disable CPSW SPL support so we fit within the 101KiB limit.
++ */
++#undef CONFIG_SPL_ETH_SUPPORT
++#endif
++
++/* USB Device Firmware Update support */
++#ifndef CONFIG_SPL_BUILD
++#define CONFIG_DFU_FUNCTION
++#define CONFIG_DFU_MMC
++#define CONFIG_CMD_DFU
++#define DFU_ALT_INFO_MMC \
++	"dfu_alt_info_mmc=" \
++	"boot part 0 1;" \
++	"rootfs part 0 2;" \
++	"MLO fat 0 1;" \
++	"MLO.raw mmc 0x100 0x100;" \
++	"u-boot.img.raw mmc 0x300 0x400;" \
++	"spl-os-args.raw mmc 0x80 0x80;" \
++	"spl-os-image.raw mmc 0x900 0x2000;" \
++	"spl-os-args fat 0 1;" \
++	"spl-os-image fat 0 1;" \
++	"u-boot.img fat 0 1;" \
++	"uEnv.txt fat 0 1\0"
++#ifdef CONFIG_NAND
++#define CONFIG_DFU_NAND
++#define DFU_ALT_INFO_NAND \
++	"dfu_alt_info_nand=" \
++	"SPL part 0 1;" \
++	"SPL.backup1 part 0 2;" \
++	"SPL.backup2 part 0 3;" \
++	"SPL.backup3 part 0 4;" \
++	"u-boot part 0 5;" \
++	"u-boot-spl-os part 0 6;" \
++	"kernel part 0 8;" \
++	"rootfs part 0 9\0"
++#else
++#define DFU_ALT_INFO_NAND ""
++#endif
++#define CONFIG_DFU_RAM
++#define DFU_ALT_INFO_RAM \
++	"dfu_alt_info_ram=" \
++	"kernel ram 0x80200000 0xD80000;" \
++	"fdt ram 0x80F80000 0x80000;" \
++	"ramdisk ram 0x81000000 0x4000000\0"
++#define DFUARGS \
++	"dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
++	DFU_ALT_INFO_MMC \
++	DFU_ALT_INFO_RAM \
++	DFU_ALT_INFO_NAND
++#endif
++
++/*
++ * Default to using SPI for environment, etc.
++ * 0x000000 - 0x020000 : SPL (128KiB)
++ * 0x020000 - 0x0A0000 : U-Boot (512KiB)
++ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
++ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
++ * 0x0E0000 - 0x442000 : Linux Kernel
++ * 0x442000 - 0x800000 : Userland
++ */
++#if defined(CONFIG_SPI_BOOT)
++/* SPL related */
++#undef CONFIG_SPL_OS_BOOT		/* Not supported by existing map */
++#define CONFIG_SPL_SPI_SUPPORT
++#define CONFIG_SPL_SPI_FLASH_SUPPORT
++#define CONFIG_SPL_SPI_LOAD
++#define CONFIG_SPL_SPI_BUS		0
++#define CONFIG_SPL_SPI_CS		0
++#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
++
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
++#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
++#define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
++#define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
++#define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */
++#define MTDIDS_DEFAULT			"nor0=m25p80-flash.0"
++#define MTDPARTS_DEFAULT		"mtdparts=m25p80-flash.0:128k(SPL)," \
++					"512k(u-boot),128k(u-boot-env1)," \
++					"128k(u-boot-env2),3464k(kernel)," \
++					"-(rootfs)"
++#elif defined(CONFIG_EMMC_BOOT)
++#undef CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV		1
++#define CONFIG_SYS_MMC_ENV_PART		2
++#define CONFIG_ENV_OFFSET		0x0
++#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
++#endif
++
++/* SPI flash. */
++#define CONFIG_CMD_SF
++#define CONFIG_SPI_FLASH
++#define CONFIG_SPI_FLASH_WINBOND
++#define CONFIG_SF_DEFAULT_SPEED		24000000
++
++/* Network. */
++#define CONFIG_PHY_GIGE
++#define CONFIG_PHYLIB
++#define CONFIG_PHY_SMSC
++
++/* NAND support */
++#ifdef CONFIG_NAND
++#define CONFIG_CMD_NAND
++#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
++#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
++
++#ifndef CONFIG_NAND512MB
++#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
++					"128k(SPL.backup1)," \
++					"128k(SPL.backup2)," \
++					"128k(SPL.backup3),1792k(u-boot)," \
++					"128k(u-boot-spl-os)," \
++					"128k(u-boot-env),5m(kernel),-(rootfs)"
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
++#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
++#else
++#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:256k(SPL)," \
++					"256k(SPL.backup1)," \
++					"256k(SPL.backup2)," \
++					"256k(SPL.backup3),2048k(u-boot)," \
++					"256k(u-boot-spl-os)," \
++					"256k(u-boot-env),5m(kernel),-(rootfs)"
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OFFSET		0x340000 /* environment starts here */
++#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
++#endif
++
++#endif
++#endif
++
++/*
++ * NOR Size = 16 MiB
++ * Number of Sectors/Blocks = 128
++ * Sector Size = 128 KiB
++ * Word length = 16 bits
++ * Default layout:
++ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
++ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
++ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
++ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
++ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
++ */
++#if defined(CONFIG_NOR)
++#undef CONFIG_SYS_NO_FLASH
++#define CONFIG_CMD_FLASH
++#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
++#define CONFIG_SYS_FLASH_PROTECTION
++#define CONFIG_SYS_FLASH_CFI
++#define CONFIG_FLASH_CFI_DRIVER
++#define CONFIG_FLASH_CFI_MTD
++#define CONFIG_SYS_MAX_FLASH_SECT	128
++#define CONFIG_SYS_MAX_FLASH_BANKS	1
++#define CONFIG_SYS_FLASH_BASE		(0x08000000)
++#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
++#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
++/* Reduce SPL size by removing unlikey targets */
++#ifdef CONFIG_NOR_BOOT
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_SECT_SIZE		(128 << 10)	/* 128 KiB */
++#define CONFIG_ENV_OFFSET		(512 << 10)	/* 512 KiB */
++#define CONFIG_ENV_OFFSET_REDUND	(768 << 10)	/* 768 KiB */
++#define MTDIDS_DEFAULT			"nor0=physmap-flash.0"
++#define MTDPARTS_DEFAULT		"mtdparts=physmap-flash.0:" \
++					"512k(u-boot)," \
++					"128k(u-boot-env1)," \
++					"128k(u-boot-env2)," \
++					"4m(kernel),-(rootfs)"
++#endif
++#endif  /* NOR support */
++
++#endif	/* ! __CONFIG_CHILISOM_H */
+-- 
+2.5.0
+
diff --git a/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
new file mode 100644
index 000000000..fc41962ef
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
@@ -0,0 +1,423 @@
+diff -Nur u-boot-2014.07.orig/include/config_distro_bootcmd.h u-boot-2014.07/include/config_distro_bootcmd.h
+--- u-boot-2014.07.orig/include/config_distro_bootcmd.h	1969-12-31 21:00:00.000000000 -0300
++++ u-boot-2014.07/include/config_distro_bootcmd.h	2015-04-13 11:53:03.000000000 -0300
+@@ -0,0 +1,236 @@
++/*
++ * (C) Copyright 2014
++ * NVIDIA Corporation <www.nvidia.com>
++ *
++ * Copyright 2014 Red Hat, Inc.
++ *
++ * SPDX-License-Identifier:     GPL-2.0+
++ */
++
++#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
++#define _CONFIG_CMD_DISTRO_BOOTCMD_H
++
++/*
++ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
++ * reference a device that is not enabled in the U-Boot configuration, e.g.
++ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
++ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
++ * at compile time, it's not  possible to detect and report such problems via
++ * a simple #ifdef/#error combination. Still, the code needs to report errors.
++ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
++ * reference a non-existent symbol, and have the name of that symbol encode
++ * the error message. Consequently, this file contains references to e.g.
++ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
++ * prevalence of capitals here, this looks like a pre-processor macro and
++ * hence seems like it should be all capitals, but it's really an error
++ * message that includes some other pre-processor symbols in the text.
++ */
++
++/* We need the part command */
++#define CONFIG_PARTITION_UUIDS
++#define CONFIG_CMD_PART
++
++#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
++		"if " #devtypel " dev ${devnum}; then " \
++			"setenv devtype " #devtypel "; " \
++			"run scan_dev_for_boot_part; " \
++		"fi\0"
++
++#define BOOTENV_SHARED_BLKDEV(devtypel) \
++	#devtypel "_boot=" \
++	BOOTENV_SHARED_BLKDEV_BODY(devtypel)
++
++#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
++	"bootcmd_" #devtypel #instance "=" \
++		"setenv devnum " #instance "; " \
++		"run " #devtypel "_boot\0"
++
++#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
++	#devtypel #instance " "
++
++#ifdef CONFIG_CMD_MMC
++#define BOOTENV_SHARED_MMC	BOOTENV_SHARED_BLKDEV(mmc)
++#define BOOTENV_DEV_MMC		BOOTENV_DEV_BLKDEV
++#define BOOTENV_DEV_NAME_MMC	BOOTENV_DEV_NAME_BLKDEV
++#else
++#define BOOTENV_SHARED_MMC
++#define BOOTENV_DEV_MMC \
++	BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
++#define BOOTENV_DEV_NAME_MMC \
++	BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
++#endif
++
++#ifdef CONFIG_CMD_SATA
++#define BOOTENV_SHARED_SATA	BOOTENV_SHARED_BLKDEV(sata)
++#define BOOTENV_DEV_SATA	BOOTENV_DEV_BLKDEV
++#define BOOTENV_DEV_NAME_SATA	BOOTENV_DEV_NAME_BLKDEV
++#else
++#define BOOTENV_SHARED_SATA
++#define BOOTENV_DEV_SATA \
++	BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
++#define BOOTENV_DEV_NAME_SATA \
++	BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
++#endif
++
++#ifdef CONFIG_CMD_SCSI
++#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
++#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
++#define BOOTENV_SHARED_SCSI \
++	"scsi_init=" \
++		"if ${scsi_need_init}; then " \
++			"setenv scsi_need_init false; " \
++			"scsi scan; " \
++		"fi\0" \
++	\
++	"scsi_boot=" \
++		BOOTENV_RUN_SCSI_INIT \
++		BOOTENV_SHARED_BLKDEV_BODY(scsi)
++#define BOOTENV_DEV_SCSI	BOOTENV_DEV_BLKDEV
++#define BOOTENV_DEV_NAME_SCSI	BOOTENV_DEV_NAME_BLKDEV
++#else
++#define BOOTENV_RUN_SCSI_INIT
++#define BOOTENV_SET_SCSI_NEED_INIT
++#define BOOTENV_SHARED_SCSI
++#define BOOTENV_DEV_SCSI \
++	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
++#define BOOTENV_DEV_NAME_SCSI \
++	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
++#endif
++
++#ifdef CONFIG_CMD_IDE
++#define BOOTENV_SHARED_IDE	BOOTENV_SHARED_BLKDEV(ide)
++#define BOOTENV_DEV_IDE		BOOTENV_DEV_BLKDEV
++#define BOOTENV_DEV_NAME_IDE	BOOTENV_DEV_NAME_BLKDEV
++#else
++#define BOOTENV_SHARED_IDE
++#define BOOTENV_DEV_IDE \
++	BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
++#define BOOTENV_DEV_NAME_IDE \
++	BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
++#endif
++
++#ifdef CONFIG_CMD_USB
++#define BOOTENV_RUN_USB_INIT "usb start; "
++#define BOOTENV_SHARED_USB \
++	"usb_boot=" \
++		BOOTENV_RUN_USB_INIT \
++		BOOTENV_SHARED_BLKDEV_BODY(usb)
++#define BOOTENV_DEV_USB		BOOTENV_DEV_BLKDEV
++#define BOOTENV_DEV_NAME_USB	BOOTENV_DEV_NAME_BLKDEV
++#else
++#define BOOTENV_RUN_USB_INIT
++#define BOOTENV_SHARED_USB
++#define BOOTENV_DEV_USB \
++	BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
++#define BOOTENV_DEV_NAME_USB \
++	BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
++#endif
++
++#if defined(CONFIG_CMD_DHCP)
++#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
++	"bootcmd_dhcp=" \
++		BOOTENV_RUN_USB_INIT \
++		"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
++			"source ${scriptaddr}; " \
++		"fi\0"
++#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
++	"dhcp "
++#else
++#define BOOTENV_DEV_DHCP \
++	BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
++#define BOOTENV_DEV_NAME_DHCP \
++	BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
++#endif
++
++#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
++#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
++	"bootcmd_pxe=" \
++		BOOTENV_RUN_USB_INIT \
++		"dhcp; " \
++		"if pxe get; then " \
++			"pxe boot; " \
++		"fi\0"
++#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
++	"pxe "
++#else
++#define BOOTENV_DEV_PXE \
++	BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
++#define BOOTENV_DEV_NAME_PXE \
++	BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
++#endif
++
++#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
++	BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
++#define BOOTENV_BOOT_TARGETS \
++	"boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
++
++#define BOOTENV_DEV(devtypeu, devtypel, instance) \
++	BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
++#define BOOTENV \
++	BOOTENV_SHARED_MMC \
++	BOOTENV_SHARED_USB \
++	BOOTENV_SHARED_SATA \
++	BOOTENV_SHARED_SCSI \
++	BOOTENV_SHARED_IDE \
++	"boot_prefixes=/ /boot/\0" \
++	"boot_scripts=boot.scr.uimg boot.scr\0" \
++	"boot_script_dhcp=boot.scr.uimg\0" \
++	BOOTENV_BOOT_TARGETS \
++	\
++	"boot_extlinux="                                                  \
++		"sysboot ${devtype} ${devnum}:${bootpart} any "           \
++			"${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
++	\
++	"scan_dev_for_extlinux="                                          \
++		"if test -e ${devtype} ${devnum}:${bootpart} "            \
++				"${prefix}extlinux/extlinux.conf; then "  \
++			"echo Found ${prefix}extlinux/extlinux.conf; "    \
++			"run boot_extlinux; "                             \
++			"echo SCRIPT FAILED: continuing...; "             \
++		"fi\0"                                                    \
++	\
++	"boot_a_script="                                                  \
++		"load ${devtype} ${devnum}:${bootpart} "                  \
++			"${scriptaddr} ${prefix}${script}; "              \
++		"source ${scriptaddr}\0"                                  \
++	\
++	"scan_dev_for_scripts="                                           \
++		"for script in ${boot_scripts}; do "                      \
++			"if test -e ${devtype} ${devnum}:${bootpart} "    \
++					"${prefix}${script}; then "       \
++				"echo Found U-Boot script "               \
++					"${prefix}${script}; "            \
++				"run boot_a_script; "                     \
++				"echo SCRIPT FAILED: continuing...; "     \
++			"fi; "                                            \
++		"done\0"                                                  \
++	\
++	"scan_dev_for_boot="                                              \
++		"echo Scanning ${devtype} ${devnum}:${bootpart}...; "     \
++		"for prefix in ${boot_prefixes}; do "                     \
++			"run scan_dev_for_extlinux; "                     \
++			"run scan_dev_for_scripts; "                      \
++		"done\0"                                                  \
++	\
++	"scan_dev_for_boot_part="                                         \
++		"part list ${devtype} ${devnum} -bootable devplist; "     \
++		"env exists devplist || setenv devplist 1; "              \
++		"for bootpart in ${devplist}; do "                        \
++			"if fstype ${devtype} ${devnum}:${bootpart} "     \
++					"bootfstype; then "               \
++				"run scan_dev_for_boot; "                 \
++			"fi; "                                            \
++		"done\0"                                                  \
++	\
++	BOOT_TARGET_DEVICES(BOOTENV_DEV)                                  \
++	\
++	"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                      \
++		"for target in ${boot_targets}; do "                      \
++			"run bootcmd_${target}; "                         \
++		"done\0"
++
++#ifndef CONFIG_BOOTCOMMAND
++#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
++#endif
++
++#endif  /* _CONFIG_CMD_DISTRO_BOOTCMD_H */
+diff -Nur u-boot-2014.07.orig/include/configs/chiliboard.h u-boot-2014.07/include/configs/chiliboard.h
+--- u-boot-2014.07.orig/include/configs/chiliboard.h	2016-02-25 00:53:19.766846991 -0300
++++ u-boot-2014.07/include/configs/chiliboard.h	2016-02-25 00:57:01.436205462 -0300
+@@ -124,7 +124,6 @@
+  * as that will normally be within the kernel lowmem and thus visible via
+  * bootm_size and we only run on platforms with 256MB or more of memory.
+  */
+-#ifdef CONFIG_RAM128MB
+ #define DEFAULT_LINUX_BOOT_ENV \
+ 	"loadaddr=0x82000000\0" \
+ 	"kernel_addr_r=0x82000000\0" \
+@@ -133,16 +132,6 @@
+ 	"rdaddr=0x84080000\0" \
+ 	"ramdisk_addr_r=0x84080000\0" \
+ 	"bootm_size=0x8000000\0"
+-#else
+-#define DEFAULT_LINUX_BOOT_ENV \
+-	"loadaddr=0x82000000\0" \
+-	"kernel_addr_r=0x82000000\0" \
+-	"fdtaddr=0x88000000\0" \
+-	"fdt_addr_r=0x88000000\0" \
+-	"rdaddr=0x88080000\0" \
+-	"ramdisk_addr_r=0x88080000\0" \
+-	"bootm_size=0x10000000\0"
+-#endif
+ 
+ /*
+  * Default to a quick boot delay.
+@@ -258,6 +247,7 @@
+ #define CONFIG_CMD_ASKENV
+ #define CONFIG_CMD_ECHO
+ #define CONFIG_CMD_BOOTZ
++#define CONFIG_SUPPORT_RAW_INITRD
+ 
+ /*
+  * Common filesystems support.  When we have removable storage we
+@@ -398,6 +388,9 @@
+ #define CONFIG_EFI_PARTITION
+ #define CONFIG_PARTITION_UUIDS
+ #define CONFIG_CMD_PART
++#define CONFIG_CMD_SETEXPR
++
++#define CONFIG_IDENT_STRING 	" Parabola GNU/Linux-libre"
+ 
+ #ifdef CONFIG_NAND
+ #ifndef CONFIG_NAND512MB
+@@ -437,12 +430,20 @@
+ 
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ 
++/* Enable Extlinux boot support */
++#define CONFIG_CMD_PXE
++#define CONFIG_MENU
++#define BOOT_TARGET_DEVICES(func)
++#include <config_distro_bootcmd.h>
++
+ #ifndef CONFIG_SPL_BUILD
+ #define CONFIG_EXTRA_ENV_SETTINGS \
++	BOOTENV \
+ 	DEFAULT_LINUX_BOOT_ENV \
+ 	"boot_fdt=try\0" \
+-	"bootpart=0:2\0" \
++	"bootpart=0:1\0" \
+ 	"bootdir=/boot\0" \
++	"fdtdir=/boot/dtbs\0" \
+ 	"bootfile=zImage\0" \
+ 	"fdtfile=undefined\0" \
+ 	"console=ttyO0,115200n8\0" \
+@@ -450,9 +451,6 @@
+ 		"uuid_disk=${uuid_gpt_disk};" \
+ 		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ 	"optargs=\0" \
+-	"mmcdev=0\0" \
+-	"mmcroot=/dev/mmcblk0p2 rw\0" \
+-	"mmcrootfstype=ext4 rootwait\0" \
+ 	"rootpath=/export/rootfs\0" \
+ 	"nfsopts=nolock\0" \
+ 	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+@@ -461,8 +459,7 @@
+ 	"ramrootfstype=ext2\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
+ 		"${optargs} " \
+-		"root=${mmcroot} " \
+-		"rootfstype=${mmcrootfstype}\0" \
++		"root=${root}\0" \
+ 	"spiroot=/dev/mtdblock4 rw\0" \
+ 	"spirootfstype=jffs2\0" \
+ 	"spisrcaddr=0xe0000\0" \
+@@ -477,46 +474,48 @@
+ 		"root=/dev/nfs " \
+ 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+ 		"ip=dhcp\0" \
+-	"bootenv=uEnv.txt\0" \
+-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+-	"importbootenv=echo Importing environment from mmc ...; " \
+-		"env import -t $loadaddr $filesize\0" \
+ 	"ramargs=setenv bootargs console=${console} " \
+ 		"${optargs} " \
+ 		"root=${ramroot} " \
+ 		"rootfstype=${ramrootfstype}\0" \
+-	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+-	"mmcloados=run mmcargs; " \
+-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+-			"if run loadfdt; then " \
+-				"bootz ${loadaddr} - ${fdtaddr}; " \
+-			"else " \
+-				"if test ${boot_fdt} = try; then " \
+-					"bootz; " \
+-				"else " \
+-					"echo WARN: Cannot load the DT; " \
+-				"fi; " \
+-			"fi; " \
+-		"else " \
+-			"bootz; " \
+-		"fi;\0" \
+-	"mmcboot=mmc dev ${mmcdev}; " \
+-		"if mmc rescan; then " \
+-			"echo SD/MMC found on device ${mmcdev};" \
+-			"if run loadbootenv; then " \
+-				"echo Loaded environment from ${bootenv};" \
+-				"run importbootenv;" \
+-			"fi;" \
+-			"if test -n $uenvcmd; then " \
+-				"echo Running uenvcmd ...;" \
+-				"run uenvcmd;" \
+-			"fi;" \
+-			"if run loadimage; then " \
+-				"run mmcloados;" \
+-			"fi;" \
+-		"fi;\0" \
++	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++	"mmcboot=for devtype in mmc; do " \
++			"for devnum in 0 1; do " \
++				"if ${devtype} dev ${devnum}; then " \
++					"echo ${devtype} found on device ${devnum};" \
++					"setenv bootpart ${devnum}:1;" \
++					"part uuid ${devtype} ${bootpart} uuid;" \
++					"setenv root PARTUUID=${uuid} rw rootwait;" \
++					"echo Checking for: ${bootdir}/uEnv.txt ...;" \
++					"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
++						"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++						"env import -t ${loadaddr} ${filesize};" \
++						"echo Loaded environment from ${bootdir}/uEnv.txt;" \
++						"echo Checking if uenvcmd is set ...;" \
++						"if test -n ${uenvcmd}; then " \
++							"echo Running uenvcmd ...;" \
++							"run uenvcmd;" \
++						"fi;" \
++					"fi;" \
++					"run scan_dev_for_boot;" \
++					"if run loadimage; then " \
++						"run mmcargs;" \
++						"if run loadfdt; then " \
++							"if run loadrd; then " \
++								"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++							"else " \
++								"bootz ${loadaddr} - ${fdtaddr};" \
++							"fi;" \
++						"fi;" \
++					"else " \
++						"echo No kernel found;" \
++					"fi;" \
++					"setexpr devnum ${devnum} + 1;" \
++				"fi;" \
++			"done;" \
++		"done;\0" \
+ 	"spiboot=echo Booting from spi ...; " \
+ 		"run spiargs; " \
+ 		"sf probe ${spibusno}:0; " \
+@@ -541,9 +540,6 @@
+ #define CONFIG_BOOTCOMMAND \
+ 	"run findfdt; " \
+ 	"run mmcboot;" \
+-	"setenv mmcdev 1; " \
+-	"setenv bootpart 1:2; " \
+-	"run mmcboot;" \
+ 	"run nandboot;"
+ 
+ /* NS16550 Configuration */
diff --git a/libre-testing/uboot4extlinux-chiliboard/PKGBUILD b/libre-testing/uboot4extlinux-chiliboard/PKGBUILD
new file mode 100644
index 000000000..61c0208c1
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/PKGBUILD
@@ -0,0 +1,61 @@
+# U-Boot: ChiliBoard
+# Maintainer: André Silva <emulatorman@parabola.nu>
+
+buildarch=4
+
+pkgname=uboot4extlinux-chiliboard
+pkgver=2014.07
+pkgrel=1
+pkgdesc="U-Boot with Extlinux support for ChiliBoard"
+arch=('armv7h')
+url="http://git.denx.de/u-boot.git/"
+conflicts=('uboot-chiliboard' 'uboot4grub-chiliboard')
+makedepends=('bc')
+license=('GPL')
+backup=(boot/extlinux/extlinux.conf)
+install=${pkgname}.install
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+        '0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch'
+        '0002-ARM-asm-io.h-use-static-inline.patch'
+        '0003-common-main.c-make-show_boot_progress-__weak.patch'
+        '0004-common-board_f-cosmetic-use-__weak-for-leds.patch'
+        '0005-chiliboard-support.patch'
+        '0006-parabola-arm-modifications.patch'
+        'extlinux.conf'
+        'uEnv.txt')
+md5sums=('36d4bad687edcafa396fee607e505d4e'
+         'e070e8b5cf8628b6440dfc9dbd87cb65'
+         '318310de19110167fe15ceac3ae32f7d'
+         '1792346431786e1442c4059cd3f288ed'
+         '2a32a77f123391c02935754ced2743c2'
+         '5951c799b35c526f02edbcb3eb1295fc'
+         '35147d090738dd0c8104a565de0f404e'
+         '068f6b4e8047115e73f29af5f384889b'
+         '0afad1f6f3f8609db6e1f5bb322b2a1a')
+
+prepare() {
+  cd u-boot-${pkgver}
+  patch -Np1 -i ../0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
+  patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch
+  patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch
+  patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch
+  patch -Np1 -i ../0005-chiliboard-support.patch
+  patch -Np1 -i ../0006-parabola-arm-modifications.patch
+}
+
+build() {
+  cd u-boot-${pkgver}
+
+  unset CFLAGS CXXFLAGS LDFLAGS
+
+  make distclean
+  make chiliboard_config
+  make
+}
+
+package() {
+  cd u-boot-${pkgver}
+  mkdir -p "${pkgdir}"/boot/extlinux
+  cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
+  cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
+}
diff --git a/libre-testing/uboot4extlinux-chiliboard/extlinux.conf b/libre-testing/uboot4extlinux-chiliboard/extlinux.conf
new file mode 100644
index 000000000..52de94d49
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/extlinux.conf
@@ -0,0 +1,46 @@
+menu title Welcome to U-Boot with Extlinux support!
+
+label Parabola GNU/Linux-libre, linux-libre kernel
+	kernel /boot/vmlinuz-linux-libre
+	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+	fdtdir /boot/dtbs/linux-libre
+
+#label Parabola GNU/Linux-libre, linux-libre-lts kernel
+#	kernel /boot/vmlinuz-linux-libre-lts
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-lts
+
+#label Parabola GNU/Linux-libre, linux-libre-knock kernel
+#	kernel /boot/vmlinuz-linux-libre-knock
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-knock
+
+#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
+#	kernel /boot/vmlinuz-linux-libre-lts-knock
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-lts-knock
+
+#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
+#	kernel /boot/vmlinuz-linux-libre-grsec
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-grsec
+
+#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
+#	kernel /boot/vmlinuz-linux-libre-grsec-knock
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-grsec-knock
+
+#label Parabola GNU/Linux-libre, linux-libre-audit kernel
+#	kernel /boot/vmlinuz-linux-libre-audit
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-audit
+
+#label Parabola GNU/Linux-libre, linux-libre-pck kernel
+#	kernel /boot/vmlinuz-linux-libre-pck
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-pck
+
+#label Parabola GNU/Linux-libre, linux-libre-rt kernel
+#	kernel /boot/vmlinuz-linux-libre-rt
+#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
+#	fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre-testing/uboot4extlinux-chiliboard/uEnv.txt b/libre-testing/uboot4extlinux-chiliboard/uEnv.txt
new file mode 100644
index 000000000..a9f26096d
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/uEnv.txt
@@ -0,0 +1 @@
+optargs=
diff --git a/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install b/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
new file mode 100644
index 000000000..4467c694e
--- /dev/null
+++ b/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
@@ -0,0 +1,37 @@
+flash_instructions() {
+  echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
+  echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
+}
+
+extlinux_warning() {
+  echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
+}
+
+flash_uboot() {
+  root=$(mount | awk '/ on \/ / { print $1; }')
+  if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
+    root=${root:0:12}
+    echo "A new U-Boot version needs to be flashed onto $root."
+    echo "Do this now? [y|N]"
+    read -r shouldwe
+    if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
+      dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
+      dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
+    else
+      echo "You can do this later by running:"
+      flash_instructions
+    fi
+  else
+    echo "Flash the new U-Boot version onto your boot device. For example:"
+    flash_instructions
+  fi
+  extlinux_warning
+}
+
+post_install() {
+  flash_uboot
+}
+
+post_upgrade() {
+  flash_uboot
+}
author	André Fabian Silva Delgado <emulatorman@parabola.nu>	2016-03-02 00:23:43 -0300
committer	André Fabian Silva Delgado <emulatorman@parabola.nu>	2016-03-02 00:28:07 -0300
commit	11467233d8b439275ce1e1db650a4c6f91a9db1f (patch)
tree	62cc14ffe05dcc5541210d2073a4c119e6a125c2 /libre-testing/uboot4extlinux-chiliboard
parent	a44772df880c7bcf6ba114a6e4d86ba4ff6b4adc (diff)