diff options
Diffstat (limited to 'kernels/linux-libre-aarch64/0009-USB-Armory-MkII-support.patch')
| -rw-r--r-- | kernels/linux-libre-aarch64/0009-USB-Armory-MkII-support.patch | 555 |
1 files changed, 555 insertions, 0 deletions
diff --git a/kernels/linux-libre-aarch64/0009-USB-Armory-MkII-support.patch b/kernels/linux-libre-aarch64/0009-USB-Armory-MkII-support.patch new file mode 100644 index 000000000..4c8f8fed3 --- /dev/null +++ b/kernels/linux-libre-aarch64/0009-USB-Armory-MkII-support.patch @@ -0,0 +1,555 @@ +From 55e7015aa06dd943b55a0101beddae1c811a2be5 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich <kevin@archlinuxarm.org> +Date: Sun, 11 Aug 2019 12:34:17 -0600 +Subject: [PATCH 9/9] USB Armory MkII support + +--- + arch/arm/boot/dts/Makefile | 2 + + arch/arm/boot/dts/imx6ul-usbarmory.dts | 255 +++++++++++++++++++++++ + arch/arm/boot/dts/imx6ull-usbarmory.dts | 256 ++++++++++++++++++++++++ + 3 files changed, 513 insertions(+) + create mode 100644 arch/arm/boot/dts/imx6ul-usbarmory.dts + create mode 100644 arch/arm/boot/dts/imx6ull-usbarmory.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index a0f92b9dbd7d..5d6e9f76f6db 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -580,9 +580,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ + imx6ul-tx6ul-0010.dtb \ + imx6ul-tx6ul-0011.dtb \ + imx6ul-tx6ul-mainboard.dtb \ ++ imx6ul-usbarmory.dtb \ + imx6ull-14x14-evk.dtb \ + imx6ull-colibri-eval-v3.dtb \ + imx6ull-colibri-wifi-eval-v3.dtb \ ++ imx6ull-usbarmory.dtb \ + imx6ull-phytec-segin-ff-rdk-nand.dtb \ + imx6ull-phytec-segin-ff-rdk-emmc.dtb \ + imx6ull-phytec-segin-lc-rdk-nand.dtb \ +diff --git a/arch/arm/boot/dts/imx6ul-usbarmory.dts b/arch/arm/boot/dts/imx6ul-usbarmory.dts +new file mode 100644 +index 000000000000..3936ef8a64f1 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6ul-usbarmory.dts +@@ -0,0 +1,255 @@ ++/* ++ * USB armory Mk II device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2019, F-Secure Corporation ++ * Andrej Rosano <andrej.rosano@f-secure.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6ul.dtsi" ++ ++/ { ++ model = "F-Secure USB armory Mk II"; ++ compatible = "inversepath,imx6ul-usbarmory-mkII", "fsl,imx6ul"; ++ ++ chosen { ++ stdout-path = &uart2; ++ }; ++ ++ memory { ++ reg = <0x80000000 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_led>; ++ ++ led-white { ++ label = "LED_WHITE"; ++ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led-blue { ++ label = "LED_BLUE"; ++ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_sd1_vmmc: sd1_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "VSD_3V3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_bluetooth>; ++ uart-has-rtscts; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&usdhc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc1>; ++ no-1-8-v; ++ keep-power-in-suspend; ++ wakeup-source; ++ status = "okay"; ++}; ++ ++&usdhc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc2>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 ++ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_bluetooth: uart1grp { ++ fsl,pins = < ++ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b0 /* BT_UART_TX */ ++ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b0 /* BT_UART_RX */ ++ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b0 /* BT_UART_CTS */ ++ MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x130b0 /* BT_UART_RTS */ ++ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x1f020 /* BT_UART_DSR */ ++ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10020 /* BT_UART_DTR */ ++ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1f020 /* BT_SWDCLK */ ++ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1f020 /* BT_SWDIO */ ++ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1f020 /* BT_RESET */ ++ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x1f020 /* BT_SWITCH_1 */ ++ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1f020 /* BT_SWITCH_2 */ ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 ++ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 ++ >; ++ }; ++ ++ pinctrl_led: ledgrp { ++ fsl,pins = < ++ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1f020 ++ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x1f020 ++ >; ++ }; ++ ++ pinctrl_usdhc1: usdhc1grp { ++ fsl,pins = < ++ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f019 ++ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x1f019 ++ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x1f019 ++ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x1f019 ++ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x1f019 ++ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x1f019 ++ >; ++ }; ++ ++ pinctrl_usdhc2: usdhc2grp { ++ fsl,pins = < ++ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10071 ++ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 ++ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 ++ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 ++ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 ++ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 ++ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 ++ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 ++ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 ++ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 ++ >; ++ }; ++}; ++ ++&aips2 { ++ crypto: caam@2140000 { ++ compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x2140000 0x3c000>; ++ ranges = <0 0x2140000 0x3c000>; ++ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>, ++ <&clks IMX6UL_CLK_CAAM_MEM>; ++ clock-names = "ipg", "aclk", "mem"; ++ ++ sec_jr0: jr0@1000 { ++ compatible = "fsl,sec-v4.0-job-ring"; ++ reg = <0x1000 0x1000>; ++ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ ++ sec_jr1: jr1@2000 { ++ compatible = "fsl,sec-v4.0-job-ring"; ++ reg = <0x2000 0x1000>; ++ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ sec_jr2: jr2@3000 { ++ compatible = "fsl,sec-v4.0-job-ring"; ++ reg = <0x3000 0x1000>; ++ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ }; ++}; ++ ++/ { ++ soc { ++ caam_sm: caam-sm@00100000 { ++ compatible = "fsl,imx7d-caam-sm", "fsl,imx6q-caam-sm"; ++ reg = <0x00100000 0x3fff>; ++ }; ++ ++ irq_sec_vio: caam_secvio { ++ compatible = "fsl,imx7d-caam-secvio", "fsl,imx6q-caam-secvio"; ++ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; ++ }; ++ }; ++ ++ caam_keyblob: caam-keyblob { ++ compatible = "fsl,sec-v4.0-keyblob"; ++ status = "okay"; ++ }; ++}; ++ ++&usbotg1 { ++ dr_mode = "otg"; ++ disable-over-current; ++ tpl-support; ++ status = "okay"; ++}; ++ ++&usbotg2 { ++ dr_mode = "host"; ++ disable-over-current; ++ tpl-support; ++ status = "okay"; ++}; +diff --git a/arch/arm/boot/dts/imx6ull-usbarmory.dts b/arch/arm/boot/dts/imx6ull-usbarmory.dts +new file mode 100644 +index 000000000000..85cf30bff527 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6ull-usbarmory.dts +@@ -0,0 +1,256 @@ ++/* ++ * USB armory Mk II device tree file ++ * https://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2019, F-Secure Corporation ++ * Andrej Rosano <andrej.rosano@f-secure.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6ul.dtsi" ++ ++/ { ++ model = "F-Secure USB armory Mk II"; ++ compatible = "inversepath,imx6ull-usbarmory-mkII", "fsl,imx6ull"; ++ ++ chosen { ++ stdout-path = &uart2; ++ }; ++ ++ memory { ++ reg = <0x80000000 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_led>; ++ ++ led-white { ++ label = "LED_WHITE"; ++ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ led-blue { ++ label = "LED_BLUE"; ++ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_sd1_vmmc: sd1_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "VSD_3V3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++}; ++ ++/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ ++/delete-node/ &crypto; ++ ++&cpu0 { ++ operating-points = < ++ /* kHz uV */ ++ 900000 1275000 ++ 792000 1225000 ++ 528000 1175000 ++ 396000 1025000 ++ 198000 950000 ++ >; ++ fsl,soc-operating-points = < ++ /* KHz uV */ ++ 900000 1250000 ++ 792000 1175000 ++ 528000 1175000 ++ 396000 1175000 ++ 198000 1175000 ++ >; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_bluetooth>; ++ uart-has-rtscts; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "okay"; ++}; ++ ++&usdhc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc1>; ++ no-1-8-v; ++ keep-power-in-suspend; ++ wakeup-source; ++ status = "okay"; ++}; ++ ++&usdhc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc2>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-0 = <&pinctrl_i2c1>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl_uart2: uart2grp { ++ fsl,pins = < ++ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 ++ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_bluetooth: uart1grp { ++ fsl,pins = < ++ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b0 /* BT_UART_TX */ ++ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b0 /* BT_UART_RX */ ++ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b0 /* BT_UART_CTS */ ++ MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x130b0 /* BT_UART_RTS */ ++ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x1f020 /* BT_UART_DSR */ ++ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10020 /* BT_UART_DTR */ ++ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1f020 /* BT_SWDCLK */ ++ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1f020 /* BT_SWDIO */ ++ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1f020 /* BT_RESET */ ++ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x1f020 /* BT_SWITCH_1 */ ++ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1f020 /* BT_SWITCH_2 */ ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 ++ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 ++ >; ++ }; ++ ++ pinctrl_led: ledgrp { ++ fsl,pins = < ++ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1f020 ++ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x1f020 ++ >; ++ }; ++ ++ pinctrl_usdhc1: usdhc1grp { ++ fsl,pins = < ++ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f019 ++ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x1f019 ++ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x1f019 ++ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x1f019 ++ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x1f019 ++ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x1f019 ++ >; ++ }; ++ ++ pinctrl_usdhc2: usdhc2grp { ++ fsl,pins = < ++ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10071 ++ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 ++ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 ++ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 ++ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 ++ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 ++ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 ++ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 ++ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 ++ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 ++ >; ++ }; ++}; ++ ++/ { ++ soc { ++ aips3: aips-bus@02200000 { ++ compatible = "fsl,aips-bus", "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x02200000 0x100000>; ++ ranges; ++ ++ dcp: dcp@02280000 { ++ compatible = "fsl,imx6ull-dcp", "fsl,imx6sl-dcp", "fsl,imx28-dcp"; ++ reg = <0x02280000 0x4000>; ++ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&clks IMX6ULL_CLK_DCP_CLK>; ++ clock-names = "dcp"; ++ }; ++ ++ rngb: rngb@02284000 { ++ compatible = "fsl,imx6sl-rng", "fsl,imx25-rngb", "fsl,imx-rng", "imx-rng"; ++ reg = <0x02284000 0x4000>; ++ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&clks IMX6UL_CLK_DUMMY>; ++ }; ++ }; ++ }; ++}; ++ ++&usbotg1 { ++ dr_mode = "peripheral"; ++ disable-over-current; ++ tpl-support; ++ status = "okay"; ++}; ++ ++&usbotg2 { ++ dr_mode = "host"; ++ disable-over-current; ++ tpl-support; ++ status = "okay"; ++}; +-- +2.23.0 + |