diff options
Diffstat (limited to 'libre-testing/mdadm/mdadm.conf')
| -rw-r--r-- | libre-testing/mdadm/mdadm.conf | 67 |
1 files changed, 67 insertions, 0 deletions
diff --git a/libre-testing/mdadm/mdadm.conf b/libre-testing/mdadm/mdadm.conf new file mode 100644 index 000000000..36eaa0cc0 --- /dev/null +++ b/libre-testing/mdadm/mdadm.conf @@ -0,0 +1,67 @@ +# mdadm configuration file +# +# mdadm will function properly without the use of a configuration file, +# but this file is useful for keeping track of arrays and member disks. +# In general, a mdadm.conf file is created, and updated, after arrays +# are created. This is the opposite behavior of /etc/raidtab which is +# created prior to array construction. +# +# +# the config file takes two types of lines: +# +# DEVICE lines specify a list of devices of where to look for +# potential member disks +# +# ARRAY lines specify information about how to identify arrays so +# so that they can be activated +# + + +# You can have more than one device line and use wild cards. The first +# example includes SCSI the first partition of SCSI disks /dev/sdb, +# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second +# line looks for array slices on IDE disks. +# +#DEVICE /dev/sd[bcdjkl]1 +#DEVICE /dev/hda1 /dev/hdb1 +# +# The designation "partitions" will scan all partitions found in +# /proc/partitions +DEVICE partitions + + +# ARRAY lines specify an array to assemble and a method of identification. +# Arrays can currently be identified by using a UUID, superblock minor number, +# or a listing of devices. +# +# super-minor is usually the minor number of the metadevice +# UUID is the Universally Unique Identifier for the array +# Each can be obtained using +# +# mdadm -D <md> +# +# To capture the UUIDs for all your RAID arrays to this file, run these: +# to get a list of running arrays: +# # mdadm -D --scan >>/etc/mdadm.conf +# to get a list from superblocks: +# # mdadm -E --scan >>/etc/mdadm.conf +# +#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371 +#ARRAY /dev/md1 super-minor=1 +#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1 +# +# ARRAY lines can also specify a "spare-group" for each array. mdadm --monitor +# will then move a spare between arrays in a spare-group if one array has a +# failed drive but no spare +#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1 +#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1 +# + + +# When used in --follow (aka --monitor) mode, mdadm needs a +# mail address and/or a program. To start mdadm's monitor mode, enable +# mdadm.service in systemd. +# +# If the lines are not found, mdadm will exit quietly +#MAILADDR root@mydomain.tld +#PROGRAM /usr/sbin/handle-mdadm-events |