diff options
Diffstat (limited to 'libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch')
| -rw-r--r-- | libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch b/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch new file mode 100644 index 000000000..3e5faf6b5 --- /dev/null +++ b/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch @@ -0,0 +1,208 @@ +From 67570590136361a2bb0ed62beef15151dc1a4572 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich <kevin@archlinuxarm.org> +Date: Fri, 5 Sep 2014 15:41:19 -0600 +Subject: [PATCH 3/8] SMILE Plug device tree file + +This adds a dts file for the SMILE Plug, which only differs from the Mirabox +dts with the LED definitions. + +Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/armada-370-smileplug.dts | 173 +++++++++++++++++++++++++++++ + 2 files changed, 174 insertions(+) + create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 992736b..2373ab3 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -625,6 +625,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ + dtb-$(CONFIG_MACH_ARMADA_370) += \ + armada-370-db.dtb \ + armada-370-mirabox.dtb \ ++ armada-370-smileplug.dtb \ + armada-370-netgear-rn102.dtb \ + armada-370-netgear-rn104.dtb \ + armada-370-rd.dtb \ +diff --git a/arch/arm/boot/dts/armada-370-smileplug.dts b/arch/arm/boot/dts/armada-370-smileplug.dts +new file mode 100644 +index 0000000..d01308a +--- /dev/null ++++ b/arch/arm/boot/dts/armada-370-smileplug.dts +@@ -0,0 +1,173 @@ ++/* ++ * Device Tree file for Marvell SMILE Plug ++ * ++ * Kevin Mihelich <kevin@archlinuxarm.org> ++ * Gregory CLEMENT <gregory.clement@free-electrons.com> ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++#include <dt-bindings/gpio/gpio.h> ++#include "armada-370.dtsi" ++ ++/ { ++ model = "Marvell SMILE Plug"; ++ compatible = "marvell,smileplug", "marvell,armada370", "marvell,armada-370-xp"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlyprintk"; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x20000000>; /* 512 MB */ ++ }; ++ ++ soc { ++ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 ++ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; ++ ++ pcie-controller { ++ status = "okay"; ++ ++ /* Internal mini-PCIe connector */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ ++ /* Connected on the PCB to a USB 3.0 XHCI controller */ ++ pcie@2,0 { ++ /* Port 1, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ ++ internal-regs { ++ serial@12000 { ++ status = "okay"; ++ }; ++ timer@20300 { ++ clock-frequency = <600000000>; ++ status = "okay"; ++ }; ++ ++ gpio_leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smile_led_pins>; ++ ++ red_eyes_led { ++ label = "smileplug:red:eyes"; ++ gpios = <&gpio1 31 0>; ++ default-state = "off"; ++ }; ++ ++ green_eyes_led { ++ label = "smileplug:green:eyes"; ++ gpios = <&gpio2 0 0>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ red_smile_led { ++ label = "smileplug:red:smile"; ++ gpios = <&gpio1 15 0>; ++ default-state = "off"; ++ }; ++ ++ green_smile_led { ++ label = "smileplug:green:smile"; ++ gpios = <&gpio1 27 0>; ++ linux,default-trigger = "default-on"; ++ }; ++ }; ++ ++ mdio { ++ pinctrl-0 = <&mdio_pins>; ++ pinctrl-names = "default"; ++ phy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ ethernet@70000 { ++ pinctrl-0 = <&ge0_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy = <&phy0>; ++ phy-mode = "rgmii-id"; ++ }; ++ ethernet@74000 { ++ pinctrl-0 = <&ge1_rgmii_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ phy = <&phy1>; ++ phy-mode = "rgmii-id"; ++ }; ++ ++ mvsdio@d4000 { ++ pinctrl-0 = <&sdio_pins3>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ /* ++ * No CD or WP GPIOs: SDIO interface used for ++ * Wifi/Bluetooth chip ++ */ ++ broken-cd; ++ }; ++ ++ usb@50000 { ++ status = "okay"; ++ }; ++ ++ usb@51000 { ++ status = "okay"; ++ }; ++ ++ i2c@11000 { ++ status = "okay"; ++ clock-frequency = <100000>; ++ pca9505: pca9505@25 { ++ compatible = "nxp,pca9505"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ reg = <0x25>; ++ }; ++ }; ++ ++ nand@d0000 { ++ status = "okay"; ++ num-cs = <1>; ++ marvell,nand-keep-config; ++ marvell,nand-enable-arbiter; ++ nand-on-flash-bbt; ++ ++ partition@0 { ++ label = "U-Boot"; ++ reg = <0 0x400000>; ++ }; ++ partition@400000 { ++ label = "Linux"; ++ reg = <0x400000 0x400000>; ++ }; ++ partition@800000 { ++ label = "Filesystem"; ++ reg = <0x800000 0x3f800000>; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pinctrl { ++ smile_led_pins: smile-led-pins { ++ marvell,pins = "mpp63", "mpp64", "mpp47", "mpp59"; ++ marvell,function = "gpio"; ++ }; ++}; +-- +2.4.4 |