From 068a3ebde5894ee9335f3f0709a2df9a4e743145 Mon Sep 17 00:00:00 2001 From: David P Date: Sun, 2 Dec 2018 19:26:05 -0300 Subject: upgpkg: kernels/linux-libre-xtreme 4.19.5_gnu-1 Signed-off-by: David P --- ...RM-atags-add-support-for-Marvell-s-u-boot.patch | 6 +- ...to-disallow-unprivileged-CLONE_NEWUSER-by.patch | 16 +- ...dt-retrieve-MAC-addresses-from-Marvell-bo.patch | 8 +- .../0003-SMILE-Plug-device-tree-file.patch | 10 +- .../0004-fix-mvsdio-eMMC-timing.patch | 6 +- ...x-Allow-mac-address-to-be-set-as-a-parame.patch | 11 +- .../0006-set-default-cubietruck-led-triggers.patch | 6 +- ...odroid-set-higher-minimum-buck2-regulator.patch | 6 +- .../0008-ARM-dove-enable-ethernet-on-D3Plug.patch | 6 +- .../0009-power-add-power-sequence-library.patch | 790 - ...c2-disable-power_down-on-rockchip-devices.patch | 44 + ...d-power-sequence-handling-for-USB-devices.patch | 164 - ...imx6qdl-Enable-usb-node-children-with-reg.patch | 49 - ...6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch | 80 - ...-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch | 74 - ...eclare-asm-symbols-as-character-arrays-in.patch | 61 - kernels/linux-libre-xtreme/90-linux.hook | 2 +- kernels/linux-libre-xtreme/PKGBUILD | 75 +- kernels/linux-libre-xtreme/config.armv7h | 1068 +- kernels/linux-libre-xtreme/config.i686 | 2572 +-- kernels/linux-libre-xtreme/config.x86_64 | 15854 ++++++++++--------- kernels/linux-libre-xtreme/linux.install | 2 + 22 files changed, 10018 insertions(+), 10892 deletions(-) delete mode 100644 kernels/linux-libre-xtreme/0009-power-add-power-sequence-library.patch create mode 100644 kernels/linux-libre-xtreme/0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch delete mode 100644 kernels/linux-libre-xtreme/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch delete mode 100644 kernels/linux-libre-xtreme/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch delete mode 100644 kernels/linux-libre-xtreme/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch delete mode 100644 kernels/linux-libre-xtreme/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch delete mode 100644 kernels/linux-libre-xtreme/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch (limited to 'kernels/linux-libre-xtreme') diff --git a/kernels/linux-libre-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/kernels/linux-libre-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch index f67e039da..35b77d3ec 100644 --- a/kernels/linux-libre-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch +++ b/kernels/linux-libre-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch @@ -1,7 +1,7 @@ -From 6cd78f818001a5e2caac7cadc3ffff95d752a021 Mon Sep 17 00:00:00 2001 +From 311f37a47e903b459dabc396494ac1621fb2d78b Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:59:28 +0100 -Subject: [PATCH 01/14] ARM: atags: add support for Marvell's u-boot +Subject: [PATCH 1/9] ARM: atags: add support for Marvell's u-boot Marvell uses a specific atag in its u-boot which includes among other information the MAC addresses for up to 4 network interfaces. @@ -47,5 +47,5 @@ index 6b335a9ff8c8..614150b53643 100644 }; -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch b/kernels/linux-libre-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch index e57df3b15..22e12e4b0 100644 --- a/kernels/linux-libre-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch +++ b/kernels/linux-libre-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch @@ -1,4 +1,4 @@ -From 1a47eb71988a919e811ce558f6f58855155c6218 Mon Sep 17 00:00:00 2001 +From 1ce3e84fdf0b56f477d30acdc8797dedd7330e37 Mon Sep 17 00:00:00 2001 From: Serge Hallyn Date: Fri, 31 May 2013 19:12:12 +0100 Subject: [PATCH] add sysctl to disallow unprivileged CLONE_NEWUSER by default @@ -13,7 +13,7 @@ Signed-off-by: Daniel Micay 3 files changed, 30 insertions(+) diff --git a/kernel/fork.c b/kernel/fork.c -index 8ed48ca2cc43..e02823819ab7 100644 +index f0b58479534f..8b2d927125c5 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -103,6 +103,11 @@ @@ -28,7 +28,7 @@ index 8ed48ca2cc43..e02823819ab7 100644 /* * Minimum number of threads to boot the kernel -@@ -1625,6 +1630,10 @@ static __latent_entropy struct task_struct *copy_process( +@@ -1649,6 +1654,10 @@ static __latent_entropy struct task_struct *copy_process( if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS)) return ERR_PTR(-EINVAL); @@ -39,7 +39,7 @@ index 8ed48ca2cc43..e02823819ab7 100644 /* * Thread groups must share signals as well, and detached threads * can only be started up within the thread group. -@@ -2421,6 +2430,12 @@ int ksys_unshare(unsigned long unshare_flags) +@@ -2467,6 +2476,12 @@ int ksys_unshare(unsigned long unshare_flags) if (unshare_flags & CLONE_NEWNS) unshare_flags |= CLONE_FS; @@ -53,7 +53,7 @@ index 8ed48ca2cc43..e02823819ab7 100644 if (err) goto bad_unshare_out; diff --git a/kernel/sysctl.c b/kernel/sysctl.c -index 2d9837c0aff4..eb5236c069fc 100644 +index cc02050fd0c4..ce2ad2b92897 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -105,6 +105,9 @@ extern int core_uses_pid; @@ -66,7 +66,7 @@ index 2d9837c0aff4..eb5236c069fc 100644 extern int pid_max; extern int pid_max_min, pid_max_max; extern int percpu_pagelist_fraction; -@@ -519,6 +522,15 @@ static struct ctl_table kern_table[] = { +@@ -514,6 +517,15 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif @@ -83,7 +83,7 @@ index 2d9837c0aff4..eb5236c069fc 100644 { .procname = "tainted", diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c -index e5222b5fb4fe..c941a66e51d1 100644 +index 923414a246e9..6b9dbc257e34 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -26,6 +26,9 @@ @@ -97,5 +97,5 @@ index e5222b5fb4fe..c941a66e51d1 100644 static DEFINE_MUTEX(userns_state_mutex); -- -2.19.0 +2.19.1 diff --git a/kernels/linux-libre-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/kernels/linux-libre-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch index e834eae8e..9ab38253d 100644 --- a/kernels/linux-libre-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch +++ b/kernels/linux-libre-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch @@ -1,8 +1,8 @@ -From a383c6aaa67e862797d380a5163e633637358568 Mon Sep 17 00:00:00 2001 +From 978d7f01eacdb7af7d87dc4c6811b9ff7f19f5cd Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:56:58 +0100 -Subject: [PATCH 02/14] ARM: atags/fdt: retrieve MAC addresses from Marvell - boot loader +Subject: [PATCH 2/9] ARM: atags/fdt: retrieve MAC addresses from Marvell boot + loader The atags are parsed and if a Marvell atag is found, up to 4 MAC addresses are extracted there and assigned to node aliases eth0..3 @@ -43,5 +43,5 @@ index 41fa7316c52b..807ed160a4b9 100644 } -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0003-SMILE-Plug-device-tree-file.patch b/kernels/linux-libre-xtreme/0003-SMILE-Plug-device-tree-file.patch index 03af05aa9..02eca7c31 100644 --- a/kernels/linux-libre-xtreme/0003-SMILE-Plug-device-tree-file.patch +++ b/kernels/linux-libre-xtreme/0003-SMILE-Plug-device-tree-file.patch @@ -1,7 +1,7 @@ -From 121aa156d4d107cf2b174c8eac89c7c473c43829 Mon Sep 17 00:00:00 2001 +From 96a2824045c5dff3c3ccb5e01813f5ec6372bde0 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:41:19 -0600 -Subject: [PATCH 03/14] SMILE Plug device tree file +Subject: [PATCH 3/9] SMILE Plug device tree file This adds a dts file for the SMILE Plug, which only differs from the Mirabox dts with the LED definitions. @@ -14,10 +14,10 @@ Signed-off-by: Kevin Mihelich create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 37a3de760d40..823a9ef2675d 100644 +index b5bd3de87c33..547603bafae1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -1115,6 +1115,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ +@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ @@ -205,5 +205,5 @@ index 000000000000..d01308ab848b + }; +}; -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0004-fix-mvsdio-eMMC-timing.patch b/kernels/linux-libre-xtreme/0004-fix-mvsdio-eMMC-timing.patch index 4669a97ab..19ef6c0ac 100644 --- a/kernels/linux-libre-xtreme/0004-fix-mvsdio-eMMC-timing.patch +++ b/kernels/linux-libre-xtreme/0004-fix-mvsdio-eMMC-timing.patch @@ -1,7 +1,7 @@ -From bca0f6d98bb3003178d962f83ba795d524460346 Mon Sep 17 00:00:00 2001 +From 43be8213a90dae909f838dedbc5e8a1e82b9572d Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:43:56 -0600 -Subject: [PATCH 04/14] fix mvsdio eMMC timing +Subject: [PATCH 4/9] fix mvsdio eMMC timing These changes from Globalscale change the MMC timing to allow the eMMC versions of the Mirabox and SMILE Plug to work. @@ -34,5 +34,5 @@ index e22bbff89c8d..6b30c850ce07 100644 host->clock = ios->clock; host->ns_per_clk = 1000000000 / (host->base_clock / (m+1)); -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/kernels/linux-libre-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch index fbbde259a..18e2a7875 100644 --- a/kernels/linux-libre-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch +++ b/kernels/linux-libre-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch @@ -1,15 +1,14 @@ -From 021b0a93050b75f56690bbe41fc470c77f7573c0 Mon Sep 17 00:00:00 2001 +From 6e0372c8fec9db69e88a19c3a70a4c3a730fd743 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 18 Feb 2014 01:43:50 -0300 -Subject: [PATCH 05/14] net/smsc95xx: Allow mac address to be set as a - parameter +Subject: [PATCH 5/9] net/smsc95xx: Allow mac address to be set as a parameter --- drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c -index 06b4d290784d..3be3b5a4a176 100644 +index 262e7a3c23cb..c2b3c5b6e1f3 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -60,6 +60,7 @@ @@ -31,7 +30,7 @@ index 06b4d290784d..3be3b5a4a176 100644 static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -910,8 +915,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) +@@ -913,8 +918,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } @@ -92,5 +91,5 @@ index 06b4d290784d..3be3b5a4a176 100644 /* maybe the boot loader passed the MAC address in devicetree */ -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0006-set-default-cubietruck-led-triggers.patch b/kernels/linux-libre-xtreme/0006-set-default-cubietruck-led-triggers.patch index ba60dea49..4bed39a6b 100644 --- a/kernels/linux-libre-xtreme/0006-set-default-cubietruck-led-triggers.patch +++ b/kernels/linux-libre-xtreme/0006-set-default-cubietruck-led-triggers.patch @@ -1,7 +1,7 @@ -From 529b0cbe182106ce8b52cf465f3c54c3e0f12e1c Mon Sep 17 00:00:00 2001 +From b22d8cc1d2763b4abbc6587dff148be3be683ac0 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sat, 14 Feb 2015 12:32:27 +0100 -Subject: [PATCH 06/14] set default cubietruck led triggers +Subject: [PATCH 6/9] set default cubietruck led triggers Signed-off-by: Kevin Mihelich --- @@ -29,5 +29,5 @@ index 5649161de1d7..2be64a886555 100644 }; -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch b/kernels/linux-libre-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch index ed7f4e596..5b5d345e7 100644 --- a/kernels/linux-libre-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch +++ b/kernels/linux-libre-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch @@ -1,7 +1,7 @@ -From adec3bf3f301ddb15994be72c92f43cc5569dd03 Mon Sep 17 00:00:00 2001 +From eaea91920f1836c32a5cdb09eb7054af16b88a27 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Thu, 11 Aug 2016 00:42:37 -0600 -Subject: [PATCH 07/14] exynos4412-odroid: set higher minimum buck2 regulator +Subject: [PATCH 7/9] exynos4412-odroid: set higher minimum buck2 regulator voltage Set a higher minimum voltage to help reboot issue. @@ -26,5 +26,5 @@ index a09e46c9dbc0..d8117a820812 100644 regulator-always-on; regulator-boot-on; -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0008-ARM-dove-enable-ethernet-on-D3Plug.patch b/kernels/linux-libre-xtreme/0008-ARM-dove-enable-ethernet-on-D3Plug.patch index 5395e2b7d..6e2d97eab 100644 --- a/kernels/linux-libre-xtreme/0008-ARM-dove-enable-ethernet-on-D3Plug.patch +++ b/kernels/linux-libre-xtreme/0008-ARM-dove-enable-ethernet-on-D3Plug.patch @@ -1,7 +1,7 @@ -From 58b7a9138a44bef39a860611354c3dac0f558b1f Mon Sep 17 00:00:00 2001 +From a3aab9208da801924ba6211998b31571ed564fcd Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sun, 7 May 2017 13:32:25 -0600 -Subject: [PATCH 08/14] ARM: dove: enable ethernet on D3Plug +Subject: [PATCH 8/9] ARM: dove: enable ethernet on D3Plug Signed-off-by: Kevin Mihelich --- @@ -27,5 +27,5 @@ index 826026c28f90..a4c9963e1261 100644 /* Samsung M8G2F eMMC */ &sdio0 { -- -2.18.0 +2.19.0 diff --git a/kernels/linux-libre-xtreme/0009-power-add-power-sequence-library.patch b/kernels/linux-libre-xtreme/0009-power-add-power-sequence-library.patch deleted file mode 100644 index c0da023ca..000000000 --- a/kernels/linux-libre-xtreme/0009-power-add-power-sequence-library.patch +++ /dev/null @@ -1,790 +0,0 @@ -From 4ddcbb9ed40c97371724245d0b8d01d471bb6570 Mon Sep 17 00:00:00 2001 -From: Peter Chen -Date: Wed, 21 Jun 2017 14:42:03 +0800 -Subject: [PATCH 09/14] power: add power sequence library - -We have an well-known problem that the device needs to do some power -sequence before it can be recognized by related host, the typical -example like hard-wired mmc devices and usb devices. - -This power sequence is hard to be described at device tree and handled by -related host driver, so we have created a common power sequence -library to cover this requirement. The core code has supplied -some common helpers for host driver, and individual power sequence -libraries handle kinds of power sequence for devices. The pwrseq -librares always need to allocate extra instance for compatible -string match. - -pwrseq_generic is intended for general purpose of power sequence, which -handles gpios and clocks currently, and can cover other controls in -future. The host driver just needs to call of_pwrseq_on/of_pwrseq_off -if only one power sequence is needed, else call of_pwrseq_on_list -/of_pwrseq_off_list instead (eg, USB hub driver). - -For new power sequence library, it needs to add its compatible string -and allocation function at pwrseq_match_table_list, then the pwrseq -core will match it with DT's, and choose this library at runtime. - -Signed-off-by: Peter Chen -Tested-by: Maciej S. Szmigiero -Tested-by Joshua Clayton -Reviewed-by: Matthias Kaehlcke -Tested-by: Matthias Kaehlcke ---- - Documentation/power/power-sequence/design.rst | 54 ++++ - MAINTAINERS | 9 + - drivers/power/Kconfig | 1 + - drivers/power/Makefile | 1 + - drivers/power/pwrseq/Kconfig | 20 ++ - drivers/power/pwrseq/Makefile | 2 + - drivers/power/pwrseq/core.c | 293 ++++++++++++++++++ - drivers/power/pwrseq/pwrseq_generic.c | 210 +++++++++++++ - include/linux/power/pwrseq.h | 84 +++++ - 9 files changed, 674 insertions(+) - create mode 100644 Documentation/power/power-sequence/design.rst - create mode 100644 drivers/power/pwrseq/Kconfig - create mode 100644 drivers/power/pwrseq/Makefile - create mode 100644 drivers/power/pwrseq/core.c - create mode 100644 drivers/power/pwrseq/pwrseq_generic.c - create mode 100644 include/linux/power/pwrseq.h - -diff --git a/Documentation/power/power-sequence/design.rst b/Documentation/power/power-sequence/design.rst -new file mode 100644 -index 000000000000..554608e5f3b6 ---- /dev/null -+++ b/Documentation/power/power-sequence/design.rst -@@ -0,0 +1,54 @@ -+==================================== -+Power Sequence Library -+==================================== -+ -+:Date: Feb, 2017 -+:Author: Peter Chen -+ -+ -+Introduction -+============ -+ -+We have an well-known problem that the device needs to do a power -+sequence before it can be recognized by related host, the typical -+examples are hard-wired mmc devices and usb devices. The host controller -+can't know what kinds of this device is in its bus if the power -+sequence has not done, since the related devices driver's probe calling -+is determined by runtime according to eunumeration results. Besides, -+the devices may have custom power sequence, so the power sequence library -+which is independent with the devices is needed. -+ -+Design -+============ -+ -+The power sequence library includes the core file and customer power -+sequence library. The core file exports interfaces are called by -+host controller driver for power sequence and customer power sequence -+library files to register its power sequence instance to global -+power sequence list. The custom power sequence library creates power -+sequence instance and implement custom power sequence. -+ -+Since the power sequence describes hardware design, the description is -+located at board description file, eg, device tree dts file. And -+a specific power sequence belongs to device, so its description -+is under the device node, please refer to: -+Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt -+ -+Custom power sequence library allocates one power sequence instance at -+bootup periods using postcore_initcall, this static allocated instance is -+used to compare with device-tree (DT) node to see if this library can be -+used for the node or not. When the result is matched, the core API will -+try to get resourses (->get, implemented at each library) for power -+sequence, if all resources are got, it will try to allocate another -+instance for next possible request from host driver. -+ -+Then, the host controller driver can carry out power sequence on for this -+DT node, the library will do corresponding operations, like open clocks, -+toggle gpio, etc. The power sequence off routine will close and free the -+resources, and is called when the parent is removed. And the power -+sequence suspend and resume routine can be called at host driver's -+suspend and resume routine if needed. -+ -+The exported interfaces -+.. kernel-doc:: drivers/power/pwrseq/core.c -+ :export: -diff --git a/MAINTAINERS b/MAINTAINERS -index 96e98e206b0d..99339375209c 100644 ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -11398,6 +11398,15 @@ F: drivers/firmware/psci*.c - F: include/linux/psci.h - F: include/uapi/linux/psci.h - -+POWER SEQUENCE LIBRARY -+M: Peter Chen -+T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git -+L: linux-pm@vger.kernel.org -+S: Maintained -+F: Documentation/devicetree/bindings/power/pwrseq/ -+F: drivers/power/pwrseq/ -+F: include/linux/power/pwrseq.h -+ - POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS - M: Sebastian Reichel - L: linux-pm@vger.kernel.org -diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig -index 63454b5cac27..c1bb0465f956 100644 ---- a/drivers/power/Kconfig -+++ b/drivers/power/Kconfig -@@ -1,3 +1,4 @@ - source "drivers/power/avs/Kconfig" - source "drivers/power/reset/Kconfig" - source "drivers/power/supply/Kconfig" -+source "drivers/power/pwrseq/Kconfig" -diff --git a/drivers/power/Makefile b/drivers/power/Makefile -index ff35c712d824..7db80354b691 100644 ---- a/drivers/power/Makefile -+++ b/drivers/power/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_POWER_AVS) += avs/ - obj-$(CONFIG_POWER_RESET) += reset/ - obj-$(CONFIG_POWER_SUPPLY) += supply/ -+obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ -diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig -new file mode 100644 -index 000000000000..c6b356926cca ---- /dev/null -+++ b/drivers/power/pwrseq/Kconfig -@@ -0,0 +1,20 @@ -+# -+# Power Sequence library -+# -+ -+menuconfig POWER_SEQUENCE -+ bool "Power sequence control" -+ help -+ It is used for drivers which needs to do power sequence -+ (eg, turn on clock, toggle reset gpio) before the related -+ devices can be found by hardware, eg, USB bus. -+ -+if POWER_SEQUENCE -+ -+config PWRSEQ_GENERIC -+ bool "Generic power sequence control" -+ depends on OF -+ help -+ This is the generic power sequence control library, and is -+ supposed to support common power sequence usage. -+endif -diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile -new file mode 100644 -index 000000000000..ad82389028c2 ---- /dev/null -+++ b/drivers/power/pwrseq/Makefile -@@ -0,0 +1,2 @@ -+obj-$(CONFIG_POWER_SEQUENCE) += core.o -+obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o -diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c -new file mode 100644 -index 000000000000..6b78a6691683 ---- /dev/null -+++ b/drivers/power/pwrseq/core.c -@@ -0,0 +1,293 @@ -+/* -+ * core.c power sequence core file -+ * -+ * Copyright (C) 2016 Freescale Semiconductor, Inc. -+ * Author: Peter Chen -+ * -+ * This program is free software: you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 of -+ * the License as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Static power sequence match table -+ * - Add compatible (the same with dts node) and related allocation function. -+ * - Update related binding doc. -+ */ -+static const struct of_device_id pwrseq_match_table_list[] = { -+ { .compatible = "usb424,2513", .data = &pwrseq_generic_alloc_instance}, -+ { .compatible = "usb424,2514", .data = &pwrseq_generic_alloc_instance}, -+ { /* sentinel */ } -+}; -+ -+static int pwrseq_get(struct device_node *np, struct pwrseq *p) -+{ -+ if (p && p->get) -+ return p->get(np, p); -+ -+ return -ENOTSUPP; -+} -+ -+static int pwrseq_on(struct pwrseq *p) -+{ -+ if (p && p->on) -+ return p->on(p); -+ -+ return -ENOTSUPP; -+} -+ -+static void pwrseq_off(struct pwrseq *p) -+{ -+ if (p && p->off) -+ p->off(p); -+} -+ -+static void pwrseq_put(struct pwrseq *p) -+{ -+ if (p && p->put) -+ p->put(p); -+} -+ -+/** -+ * of_pwrseq_on - Carry out power sequence on for device node -+ * -+ * @np: the device node would like to power on -+ * -+ * Carry out a single device power on. If multiple devices -+ * need to be handled, use of_pwrseq_on_list() instead. -+ * -+ * Return a pointer to the power sequence instance on success, or NULL if -+ * not exist, or an error code on failure. -+ */ -+struct pwrseq *of_pwrseq_on(struct device_node *np) -+{ -+ struct pwrseq *pwrseq; -+ int ret; -+ const struct of_device_id *of_id; -+ struct pwrseq *(*alloc_instance)(void); -+ -+ of_id = of_match_node(pwrseq_match_table_list, np); -+ if (!of_id) -+ return NULL; -+ -+ alloc_instance = of_id->data; -+ /* Allocate pwrseq instance */ -+ pwrseq = alloc_instance(); -+ if (IS_ERR(pwrseq)) -+ return pwrseq; -+ -+ ret = pwrseq_get(np, pwrseq); -+ if (ret) -+ goto pwr_put; -+ -+ ret = pwrseq_on(pwrseq); -+ if (ret) -+ goto pwr_put; -+ -+ return pwrseq; -+ -+pwr_put: -+ pwrseq_put(pwrseq); -+ return ERR_PTR(ret); -+} -+EXPORT_SYMBOL_GPL(of_pwrseq_on); -+ -+/** -+ * of_pwrseq_off - Carry out power sequence off for this pwrseq instance -+ * -+ * @pwrseq: the pwrseq instance which related device would like to be off -+ * -+ * This API is used to power off single device, it is the opposite -+ * operation for of_pwrseq_on. -+ */ -+void of_pwrseq_off(struct pwrseq *pwrseq) -+{ -+ pwrseq_off(pwrseq); -+ pwrseq_put(pwrseq); -+} -+EXPORT_SYMBOL_GPL(of_pwrseq_off); -+ -+/** -+ * of_pwrseq_on_list - Carry out power sequence on for list -+ * -+ * @np: the device node would like to power on -+ * @head: the list head for pwrseq list on this bus -+ * -+ * This API is used to power on multiple devices at single bus. -+ * If there are several devices on bus (eg, USB bus), uses this -+ * this API. Otherwise, use of_pwrseq_on instead. After the device -+ * is powered on successfully, it will be added to pwrseq list for -+ * this bus. The caller needs to use mutex_lock for concurrent. -+ * -+ * Return 0 on success, or -ENOENT if not exist, or an error value on failure. -+ */ -+int of_pwrseq_on_list(struct device_node *np, struct list_head *head) -+{ -+ struct pwrseq *pwrseq; -+ struct pwrseq_list_per_dev *pwrseq_list_node; -+ -+ pwrseq_list_node = kzalloc(sizeof(*pwrseq_list_node), GFP_KERNEL); -+ if (!pwrseq_list_node) -+ return -ENOMEM; -+ -+ pwrseq = of_pwrseq_on(np); -+ if (!pwrseq) -+ return -ENOENT; -+ -+ if (IS_ERR(pwrseq)) { -+ kfree(pwrseq_list_node); -+ return PTR_ERR(pwrseq); -+ } -+ -+ pwrseq_list_node->pwrseq = pwrseq; -+ list_add(&pwrseq_list_node->list, head); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(of_pwrseq_on_list); -+ -+/** -+ * of_pwrseq_off_list - Carry out power sequence off for the list -+ * -+ * @head: the list head for pwrseq instance list on this bus -+ * -+ * This API is used to power off all devices on this bus, it is -+ * the opposite operation for of_pwrseq_on_list. -+ * The caller needs to use mutex_lock for concurrent. -+ */ -+void of_pwrseq_off_list(struct list_head *head) -+{ -+ struct pwrseq *pwrseq; -+ struct pwrseq_list_per_dev *pwrseq_list_node, *tmp_node; -+ -+ list_for_each_entry_safe(pwrseq_list_node, tmp_node, head, list) { -+ pwrseq = pwrseq_list_node->pwrseq; -+ of_pwrseq_off(pwrseq); -+ list_del(&pwrseq_list_node->list); -+ kfree(pwrseq_list_node); -+ } -+} -+EXPORT_SYMBOL_GPL(of_pwrseq_off_list); -+ -+/** -+ * pwrseq_suspend - Carry out power sequence suspend for this pwrseq instance -+ * -+ * @pwrseq: the pwrseq instance -+ * -+ * This API is used to do suspend operation on pwrseq instance. -+ * -+ * Return 0 on success, or an error value otherwise. -+ */ -+int pwrseq_suspend(struct pwrseq *p) -+{ -+ int ret = 0; -+ -+ if (p && p->suspend) -+ ret = p->suspend(p); -+ else -+ return ret; -+ -+ if (!ret) -+ p->suspended = true; -+ else -+ pr_err("%s failed\n", __func__); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(pwrseq_suspend); -+ -+/** -+ * pwrseq_resume - Carry out power sequence resume for this pwrseq instance -+ * -+ * @pwrseq: the pwrseq instance -+ * -+ * This API is used to do resume operation on pwrseq instance. -+ * -+ * Return 0 on success, or an error value otherwise. -+ */ -+int pwrseq_resume(struct pwrseq *p) -+{ -+ int ret = 0; -+ -+ if (p && p->resume) -+ ret = p->resume(p); -+ else -+ return ret; -+ -+ if (!ret) -+ p->suspended = false; -+ else -+ pr_err("%s failed\n", __func__); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(pwrseq_resume); -+ -+/** -+ * pwrseq_suspend_list - Carry out power sequence suspend for list -+ * -+ * @head: the list head for pwrseq instance list on this bus -+ * -+ * This API is used to do suspend on all power sequence instances on this bus. -+ * The caller needs to use mutex_lock for concurrent. -+ */ -+int pwrseq_suspend_list(struct list_head *head) -+{ -+ struct pwrseq *pwrseq; -+ struct pwrseq_list_per_dev *pwrseq_list_node; -+ int ret = 0; -+ -+ list_for_each_entry(pwrseq_list_node, head, list) { -+ ret = pwrseq_suspend(pwrseq_list_node->pwrseq); -+ if (ret) -+ break; -+ } -+ -+ if (ret) { -+ list_for_each_entry(pwrseq_list_node, head, list) { -+ pwrseq = pwrseq_list_node->pwrseq; -+ if (pwrseq->suspended) -+ pwrseq_resume(pwrseq); -+ } -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(pwrseq_suspend_list); -+ -+/** -+ * pwrseq_resume_list - Carry out power sequence resume for the list -+ * -+ * @head: the list head for pwrseq instance list on this bus -+ * -+ * This API is used to do resume on all power sequence instances on this bus. -+ * The caller needs to use mutex_lock for concurrent. -+ */ -+int pwrseq_resume_list(struct list_head *head) -+{ -+ struct pwrseq_list_per_dev *pwrseq_list_node; -+ int ret = 0; -+ -+ list_for_each_entry(pwrseq_list_node, head, list) { -+ ret = pwrseq_resume(pwrseq_list_node->pwrseq); -+ if (ret) -+ break; -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(pwrseq_resume_list); -diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c -new file mode 100644 -index 000000000000..b7bbd6c5b47d ---- /dev/null -+++ b/drivers/power/pwrseq/pwrseq_generic.c -@@ -0,0 +1,210 @@ -+/* -+ * pwrseq_generic.c Generic power sequence handling -+ * -+ * Copyright (C) 2016 Freescale Semiconductor, Inc. -+ * Author: Peter Chen -+ * -+ * This program is free software: you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 of -+ * the License as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+struct pwrseq_generic { -+ struct pwrseq pwrseq; -+ struct gpio_desc *gpiod_reset; -+ struct clk *clks[PWRSEQ_MAX_CLKS]; -+ u32 duration_us; -+ bool suspended; -+}; -+ -+#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) -+ -+static int pwrseq_generic_suspend(struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ int clk; -+ -+ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) -+ clk_disable_unprepare(pwrseq_gen->clks[clk]); -+ -+ pwrseq_gen->suspended = true; -+ return 0; -+} -+ -+static int pwrseq_generic_resume(struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ int clk, ret = 0; -+ -+ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { -+ ret = clk_prepare_enable(pwrseq_gen->clks[clk]); -+ if (ret) { -+ pr_err("Can't enable clock, ret=%d\n", ret); -+ goto err_disable_clks; -+ } -+ } -+ -+ pwrseq_gen->suspended = false; -+ return ret; -+ -+err_disable_clks: -+ while (--clk >= 0) -+ clk_disable_unprepare(pwrseq_gen->clks[clk]); -+ -+ return ret; -+} -+ -+static void pwrseq_generic_put(struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ int clk; -+ -+ if (pwrseq_gen->gpiod_reset) -+ gpiod_put(pwrseq_gen->gpiod_reset); -+ -+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) -+ clk_put(pwrseq_gen->clks[clk]); -+ -+ kfree(pwrseq_gen); -+} -+ -+static void pwrseq_generic_off(struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ int clk; -+ -+ if (pwrseq_gen->suspended) -+ return; -+ -+ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) -+ clk_disable_unprepare(pwrseq_gen->clks[clk]); -+} -+ -+static int pwrseq_generic_on(struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ int clk, ret = 0; -+ struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; -+ -+ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { -+ ret = clk_prepare_enable(pwrseq_gen->clks[clk]); -+ if (ret) { -+ pr_err("Can't enable clock, ret=%d\n", ret); -+ goto err_disable_clks; -+ } -+ } -+ -+ if (gpiod_reset) { -+ u32 duration_us = pwrseq_gen->duration_us; -+ -+ if (duration_us <= 10) -+ udelay(10); -+ else -+ usleep_range(duration_us, duration_us + 100); -+ gpiod_set_value(gpiod_reset, 0); -+ } -+ -+ return ret; -+ -+err_disable_clks: -+ while (--clk >= 0) -+ clk_disable_unprepare(pwrseq_gen->clks[clk]); -+ -+ return ret; -+} -+ -+static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) -+{ -+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); -+ enum of_gpio_flags flags; -+ int reset_gpio, clk, ret = 0; -+ -+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { -+ pwrseq_gen->clks[clk] = of_clk_get(np, clk); -+ if (IS_ERR(pwrseq_gen->clks[clk])) { -+ ret = PTR_ERR(pwrseq_gen->clks[clk]); -+ if (ret != -ENOENT) -+ goto err_put_clks; -+ pwrseq_gen->clks[clk] = NULL; -+ break; -+ } -+ } -+ -+ reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); -+ if (gpio_is_valid(reset_gpio)) { -+ unsigned long gpio_flags; -+ -+ if (flags & OF_GPIO_ACTIVE_LOW) -+ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; -+ else -+ gpio_flags = GPIOF_OUT_INIT_HIGH; -+ -+ ret = gpio_request_one(reset_gpio, gpio_flags, -+ "pwrseq-reset-gpios"); -+ if (ret) -+ goto err_put_clks; -+ -+ pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); -+ of_property_read_u32(np, "reset-duration-us", -+ &pwrseq_gen->duration_us); -+ } else if (reset_gpio == -ENOENT) { -+ ; /* no such gpio */ -+ } else { -+ ret = reset_gpio; -+ pr_err("Failed to get reset gpio on %s, err = %d\n", -+ np->full_name, reset_gpio); -+ goto err_put_clks; -+ } -+ -+ return 0; -+ -+err_put_clks: -+ while (--clk >= 0) -+ clk_put(pwrseq_gen->clks[clk]); -+ return ret; -+} -+ -+/** -+ * pwrseq_generic_alloc_instance - power sequence instance allocation -+ * -+ * This function is used to allocate one generic power sequence instance, -+ * it is called when the system boots up and after one power sequence -+ * instance is got successfully. -+ * -+ * Return zero on success or an error code otherwise. -+ */ -+struct pwrseq *pwrseq_generic_alloc_instance(void) -+{ -+ struct pwrseq_generic *pwrseq_gen; -+ -+ pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); -+ if (!pwrseq_gen) -+ return ERR_PTR(-ENOMEM); -+ -+ pwrseq_gen->pwrseq.get = pwrseq_generic_get; -+ pwrseq_gen->pwrseq.on = pwrseq_generic_on; -+ pwrseq_gen->pwrseq.off = pwrseq_generic_off; -+ pwrseq_gen->pwrseq.put = pwrseq_generic_put; -+ pwrseq_gen->pwrseq.suspend = pwrseq_generic_suspend; -+ pwrseq_gen->pwrseq.resume = pwrseq_generic_resume; -+ -+ return &pwrseq_gen->pwrseq; -+} -diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h -new file mode 100644 -index 000000000000..c5b278f5f2ae ---- /dev/null -+++ b/include/linux/power/pwrseq.h -@@ -0,0 +1,84 @@ -+#ifndef __LINUX_PWRSEQ_H -+#define __LINUX_PWRSEQ_H -+ -+#include -+ -+#define PWRSEQ_MAX_CLKS 3 -+ -+/** -+ * struct pwrseq - the power sequence structure -+ * @pwrseq_of_match_table: the OF device id table this pwrseq library supports -+ * @node: the list pointer to be added to pwrseq list -+ * @get: the API is used to get pwrseq instance from the device node -+ * @on: do power on for this pwrseq instance -+ * @off: do power off for this pwrseq instance -+ * @put: release the resources on this pwrseq instance -+ * @suspend: do suspend operation on this pwrseq instance -+ * @resume: do resume operation on this pwrseq instance -+ */ -+struct pwrseq { -+ const struct of_device_id *pwrseq_of_match_table; -+ struct list_head node; -+ int (*get)(struct device_node *np, struct pwrseq *p); -+ int (*on)(struct pwrseq *p); -+ void (*off)(struct pwrseq *p); -+ void (*put)(struct pwrseq *p); -+ int (*suspend)(struct pwrseq *p); -+ int (*resume)(struct pwrseq *p); -+ bool suspended; -+}; -+ -+/* used for power sequence instance list in one driver */ -+struct pwrseq_list_per_dev { -+ struct pwrseq *pwrseq; -+ struct list_head list; -+}; -+ -+#if IS_ENABLED(CONFIG_POWER_SEQUENCE) -+struct pwrseq *of_pwrseq_on(struct device_node *np); -+void of_pwrseq_off(struct pwrseq *pwrseq); -+int of_pwrseq_on_list(struct device_node *np, struct list_head *head); -+void of_pwrseq_off_list(struct list_head *head); -+int pwrseq_suspend(struct pwrseq *p); -+int pwrseq_resume(struct pwrseq *p); -+int pwrseq_suspend_list(struct list_head *head); -+int pwrseq_resume_list(struct list_head *head); -+#else -+static inline struct pwrseq *of_pwrseq_on(struct device_node *np) -+{ -+ return NULL; -+} -+static void of_pwrseq_off(struct pwrseq *pwrseq) {} -+static int of_pwrseq_on_list(struct device_node *np, struct list_head *head) -+{ -+ return 0; -+} -+static void of_pwrseq_off_list(struct list_head *head) {} -+static int pwrseq_suspend(struct pwrseq *p) -+{ -+ return 0; -+} -+static int pwrseq_resume(struct pwrseq *p) -+{ -+ return 0; -+} -+static int pwrseq_suspend_list(struct list_head *head) -+{ -+ return 0; -+} -+static int pwrseq_resume_list(struct list_head *head) -+{ -+ return 0; -+} -+#endif /* CONFIG_POWER_SEQUENCE */ -+ -+#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) -+extern struct pwrseq *pwrseq_generic_alloc_instance(void); -+#else -+static inline struct pwrseq *pwrseq_generic_alloc_instance(void) -+{ -+ return ERR_PTR(-ENOTSUPP); -+} -+#endif /* CONFIG_PWRSEQ_GENERIC */ -+ -+#endif /* __LINUX_PWRSEQ_H */ --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch b/kernels/linux-libre-xtreme/0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch new file mode 100644 index 000000000..a91facd17 --- /dev/null +++ b/kernels/linux-libre-xtreme/0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch @@ -0,0 +1,44 @@ +From 3379ffad8f5b3db47578cc4eadc3c0f22f7547f1 Mon Sep 17 00:00:00 2001 +From: Hal Emmerich +Date: Thu, 19 Jul 2018 21:48:08 -0500 +Subject: [PATCH 9/9] usb: dwc2: disable power_down on rockchip devices + + The bug would let the usb controller enter partial power down, + which was formally known as hibernate, upon boot if nothing was plugged + in to the port. Partial power down couldn't be exited properly, so any + usb devices plugged in after boot would not be usable. + + Before the name change, params.hibernation was false by default, so + _dwc2_hcd_suspend() would skip entering hibernation. With the + rename, _dwc2_hcd_suspend() was changed to use params.power_down + to decide whether or not to enter partial power down. + + Since params.power_down is non-zero by default, it needs to be set + to 0 for rockchip devices to restore functionality. + + This bug was reported in the linux-usb thread: + REGRESSION: usb: dwc2: USB device not seen after boot + + The commit that caused this regression is: + 6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6 + +Signed-off-by: Hal Emmerich +--- + drivers/usb/dwc2/params.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c +index bf7052e037d6..09292dc977e4 100644 +--- a/drivers/usb/dwc2/params.c ++++ b/drivers/usb/dwc2/params.c +@@ -81,6 +81,7 @@ static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) + p->host_perio_tx_fifo_size = 256; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT; ++ p->power_down = 0; + } + + static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) +-- +2.19.0 + diff --git a/kernels/linux-libre-xtreme/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch b/kernels/linux-libre-xtreme/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch deleted file mode 100644 index ddebef4f0..000000000 --- a/kernels/linux-libre-xtreme/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch +++ /dev/null @@ -1,164 +0,0 @@ -From 1358757f34c7feff4aab541814c73f6cf3e83b69 Mon Sep 17 00:00:00 2001 -From: Peter Chen -Date: Wed, 21 Jun 2017 14:42:05 +0800 -Subject: [PATCH 10/14] usb: core: add power sequence handling for USB devices - -Some hard-wired USB devices need to do power sequence to let the -device work normally, the typical power sequence like: enable USB -PHY clock, toggle reset pin, etc. But current Linux USB driver -lacks of such code to do it, it may cause some hard-wired USB devices -works abnormal or can't be recognized by controller at all. - -In this patch, it calls power sequence library APIs to finish -the power sequence events. It will do power on sequence at hub's -probe for all devices under this hub (includes root hub). -At hub_disconnect, it will do power off sequence which is at powered -on list. - -Signed-off-by: Peter Chen -Tested-by Joshua Clayton -Tested-by: Maciej S. Szmigiero -Reviewed-by: Vaibhav Hiremath -Acked-by: Alan Stern ---- - drivers/usb/Kconfig | 1 + - drivers/usb/core/hub.c | 49 ++++++++++++++++++++++++++++++++++++++---- - drivers/usb/core/hub.h | 1 + - 3 files changed, 47 insertions(+), 4 deletions(-) - -diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig -index 987fc5ba6321..bd09fc8ff763 100644 ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -45,6 +45,7 @@ config USB - tristate "Support for Host-side USB" - depends on USB_ARCH_HAS_HCD - select USB_COMMON -+ select POWER_SEQUENCE - select NLS # for UTF-8 strings - ---help--- - Universal Serial Bus (USB) is a specification for a serial bus -diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c -index fcae521df29b..0c708d3ef179 100644 ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -28,6 +28,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -1654,6 +1655,7 @@ static void hub_disconnect(struct usb_interface *intf) - hub->error = 0; - hub_quiesce(hub, HUB_DISCONNECT); - -+ of_pwrseq_off_list(&hub->pwrseq_list); - mutex_lock(&usb_port_peer_mutex); - - /* Avoid races with recursively_mark_NOTATTACHED() */ -@@ -1700,11 +1702,41 @@ static bool hub_descriptor_is_sane(struct usb_host_interface *desc) - return true; - } - -+#ifdef CONFIG_OF -+static int hub_of_pwrseq_on(struct usb_hub *hub) -+{ -+ struct device *parent; -+ struct usb_device *hdev = hub->hdev; -+ struct device_node *np; -+ int ret; -+ -+ if (hdev->parent) -+ parent = &hdev->dev; -+ else -+ parent = bus_to_hcd(hdev->bus)->self.sysdev; -+ -+ for_each_child_of_node(parent->of_node, np) { -+ ret = of_pwrseq_on_list(np, &hub->pwrseq_list); -+ /* Maybe no power sequence library is chosen */ -+ if (ret && ret != -ENOENT) -+ return ret; -+ } -+ -+ return 0; -+} -+#else -+static int hub_of_pwrseq_on(struct usb_hub *hub) -+{ -+ return 0; -+} -+#endif -+ - static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - { - struct usb_host_interface *desc; - struct usb_device *hdev; - struct usb_hub *hub; -+ int ret = -ENODEV; - - desc = intf->cur_altsetting; - hdev = interface_to_usbdev(intf); -@@ -1795,6 +1827,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - INIT_DELAYED_WORK(&hub->leds, led_work); - INIT_DELAYED_WORK(&hub->init_work, NULL); - INIT_WORK(&hub->events, hub_event); -+ INIT_LIST_HEAD(&hub->pwrseq_list); - usb_get_intf(intf); - usb_get_dev(hdev); - -@@ -1808,11 +1841,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) - if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) - hub->quirk_check_port_auto_suspend = 1; - -- if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) -- return 0; -+ if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { -+ ret = hub_of_pwrseq_on(hub); -+ if (!ret) -+ return 0; -+ } - - hub_disconnect(intf); -- return -ENODEV; -+ return ret; - } - - static int -@@ -3653,14 +3689,19 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) - - /* stop hub_wq and related activity */ - hub_quiesce(hub, HUB_SUSPEND); -- return 0; -+ return pwrseq_suspend_list(&hub->pwrseq_list); - } - - static int hub_resume(struct usb_interface *intf) - { - struct usb_hub *hub = usb_get_intfdata(intf); -+ int ret; - - dev_dbg(&intf->dev, "%s\n", __func__); -+ ret = pwrseq_resume_list(&hub->pwrseq_list); -+ if (ret) -+ return ret; -+ - hub_activate(hub, HUB_RESUME); - return 0; - } -diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h -index 4accfb63f7dc..abe71c5e84cb 100644 ---- a/drivers/usb/core/hub.h -+++ b/drivers/usb/core/hub.h -@@ -70,6 +70,7 @@ struct usb_hub { - struct delayed_work init_work; - struct work_struct events; - struct usb_port **ports; -+ struct list_head pwrseq_list; /* powered pwrseq node list */ - }; - - /** --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch b/kernels/linux-libre-xtreme/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch deleted file mode 100644 index f5f920626..000000000 --- a/kernels/linux-libre-xtreme/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 0b61e501bdfb883df4211fdc47d246df6af06e5a Mon Sep 17 00:00:00 2001 -From: Joshua Clayton -Date: Wed, 21 Jun 2017 14:42:06 +0800 -Subject: [PATCH 11/14] ARM: dts: imx6qdl: Enable usb node children with - -Give usb nodes #address and #size attributes, so that a child node -representing a permanently connected device such as an onboard hub may -be addressed with a attribute - -Signed-off-by: Joshua Clayton -Signed-off-by: Peter Chen ---- - arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi -index 911141e24681..c74e9c7a83bf 100644 ---- a/arch/arm/boot/dts/imx6qdl.dtsi -+++ b/arch/arm/boot/dts/imx6qdl.dtsi -@@ -965,6 +965,8 @@ - - usbh1: usb@2184200 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; -+ #address-cells = <1>; -+ #size-cells = <0>; - reg = <0x02184200 0x200>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; -@@ -979,6 +981,8 @@ - - usbh2: usb@2184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; -+ #address-cells = <1>; -+ #size-cells = <0>; - reg = <0x02184400 0x200>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; -@@ -992,6 +996,8 @@ - - usbh3: usb@2184600 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; -+ #address-cells = <1>; -+ #size-cells = <0>; - reg = <0x02184600 0x200>; - interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch b/kernels/linux-libre-xtreme/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch deleted file mode 100644 index 6f8d546d4..000000000 --- a/kernels/linux-libre-xtreme/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 3e35057ab8b11c232a7c0edeea3299d53c6d600d Mon Sep 17 00:00:00 2001 -From: Peter Chen -Date: Wed, 21 Jun 2017 14:42:07 +0800 -Subject: [PATCH 12/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB - property - -The current dts describes USB HUB's property at USB controller's -entry, it is improper. The USB HUB should be the child node -under USB controller, and power sequence properties are under -it. Besides, using gpio pinctrl setting for USB2415's reset pin. - -Signed-off-by: Peter Chen -Signed-off-by: Joshua Clayton -Tested-by: Maciej S. Szmigiero ---- - arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++++++++++++-------------- - 1 file changed, 12 insertions(+), 14 deletions(-) - -diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi -index 4f27861bbb32..dead14b0d4bf 100644 ---- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi -@@ -5,6 +5,8 @@ - * Author: Fabio Estevam - */ - -+#include -+ - / { - aliases { - backlight = &backlight; -@@ -61,17 +63,6 @@ - #address-cells = <1>; - #size-cells = <0>; - -- reg_usb_h1_vbus: regulator@0 { -- compatible = "regulator-fixed"; -- reg = <0>; -- regulator-name = "usb_h1_vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- enable-active-high; -- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ -- gpio = <&gpio7 12 0>; -- }; -- - reg_panel: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; -@@ -197,7 +188,7 @@ - - pinctrl_usbh: usbhgrp { - fsl,pins = < -- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 -+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; -@@ -268,9 +259,16 @@ - &usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; -- vbus-supply = <®_usb_h1_vbus>; -- clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; -+ -+ usb2415: hub@1 { -+ compatible = "usb424,2514"; -+ reg = <1>; -+ -+ clocks = <&clks IMX6QDL_CLK_CKO>; -+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; -+ reset-duration-us = <3000>; -+ }; - }; - - &usdhc3 { --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch b/kernels/linux-libre-xtreme/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch deleted file mode 100644 index 31023b56b..000000000 --- a/kernels/linux-libre-xtreme/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 9d40728e452daf4d77f8924e499814138dc5363c Mon Sep 17 00:00:00 2001 -From: Joshua Clayton -Date: Wed, 21 Jun 2017 14:42:08 +0800 -Subject: [PATCH 13/14] ARM: dts: imx6q-evi: Fix onboard hub reset line - -Previously the onboard hub was made to work by treating its -reset gpio as a regulator enable. -Get rid of that kludge now that pwseq has added reset gpio support -Move pin muxing the hub reset pin into the usbh1 group - -Signed-off-by: Joshua Clayton -Signed-off-by: Peter Chen ---- - arch/arm/boot/dts/imx6q-evi.dts | 25 +++++++------------------ - 1 file changed, 7 insertions(+), 18 deletions(-) - -diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts -index fcd257bc5ac3..d32fa81bba95 100644 ---- a/arch/arm/boot/dts/imx6q-evi.dts -+++ b/arch/arm/boot/dts/imx6q-evi.dts -@@ -54,18 +54,6 @@ - reg = <0x10000000 0x40000000>; - }; - -- reg_usbh1_vbus: regulator-usbhubreset { -- compatible = "regulator-fixed"; -- regulator-name = "usbh1_vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- enable-active-high; -- startup-delay-us = <2>; -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_usbh1_hubreset>; -- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; -- }; -- - reg_usb_otg_vbus: regulator-usbotgvbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; -@@ -213,12 +201,18 @@ - }; - - &usbh1 { -- vbus-supply = <®_usbh1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - dr_mode = "host"; - disable-over-current; - status = "okay"; -+ -+ usb2415host: hub@1 { -+ compatible = "usb424,2513"; -+ reg = <1>; -+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; -+ reset-duration-us = <3000>; -+ }; - }; - - &usbotg { -@@ -481,11 +475,6 @@ - MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 - /* usbh1_b OC */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -- >; -- }; -- -- pinctrl_usbh1_hubreset: usbh1hubresetgrp { -- fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - >; - }; --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch b/kernels/linux-libre-xtreme/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch deleted file mode 100644 index d18e2dd8e..000000000 --- a/kernels/linux-libre-xtreme/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch +++ /dev/null @@ -1,61 +0,0 @@ -From a877c2568fc96a7a7ba89dd4cf0df20341df2a37 Mon Sep 17 00:00:00 2001 -From: Ethan Tuttle -Date: Tue, 19 Jun 2018 21:31:08 -0700 -Subject: [PATCH 14/14] ARM: mvebu: declare asm symbols as character arrays in - pmsu.c - -With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to -detect buffer overflows. If src or dest is declared as a char, attempts to -copy more than byte will result in a fortify_panic(). - -Address this problem in mvebu_setup_boot_addr_wa() by declaring -mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove -a couple addressof operators to avoid "arithmetic on pointer to an -incomplete type" compiler error. - -See commit 54a7d50b9205 ("x86: mark kprobe templates as character arrays, -not single characters") for a similar fix. - -Fixes "detected buffer overflow in memcpy" error during init on some mvebu -systems (armada-370-xp, armada-375): - -(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4) -(mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204) -(mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8) -(do_one_initcall) from (kernel_init_freeable+0x1bc/0x254) -(kernel_init_freeable) from (kernel_init+0x8/0x114) -(kernel_init) from (ret_from_fork+0x14/0x2c) - -Signed-off-by: Ethan Tuttle -Tested-by: Ethan Tuttle ---- - arch/arm/mach-mvebu/pmsu.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c -index 27a78c80e5b1..73d5d72dfc3e 100644 ---- a/arch/arm/mach-mvebu/pmsu.c -+++ b/arch/arm/mach-mvebu/pmsu.c -@@ -116,8 +116,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) - PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); - } - --extern unsigned char mvebu_boot_wa_start; --extern unsigned char mvebu_boot_wa_end; -+extern unsigned char mvebu_boot_wa_start[]; -+extern unsigned char mvebu_boot_wa_end[]; - - /* - * This function sets up the boot address workaround needed for SMP -@@ -130,7 +130,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, - phys_addr_t resume_addr_reg) - { - void __iomem *sram_virt_base; -- u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; -+ u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start; - - mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); - mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, --- -2.18.0 - diff --git a/kernels/linux-libre-xtreme/90-linux.hook b/kernels/linux-libre-xtreme/90-linux.hook index be0d88653..fca45abe1 100644 --- a/kernels/linux-libre-xtreme/90-linux.hook +++ b/kernels/linux-libre-xtreme/90-linux.hook @@ -2,7 +2,7 @@ Type = File Operation = Install Operation = Upgrade -Target = boot/vmlinuz-%PKGBASE% +Target = usr/lib/modules/%KERNVER%/vmlinuz Target = usr/lib/initcpio/* [Action] diff --git a/kernels/linux-libre-xtreme/PKGBUILD b/kernels/linux-libre-xtreme/PKGBUILD index add850576..64ab1b503 100644 --- a/kernels/linux-libre-xtreme/PKGBUILD +++ b/kernels/linux-libre-xtreme/PKGBUILD @@ -10,8 +10,8 @@ # Based on linux package pkgbase=linux-libre-xtreme -_srcbasever=4.18-gnu -_srcver=4.18.9-gnu +_srcbasever=4.19-gnu +_srcver=4.19.5-gnu _hardenedver=a _replacesarchkernel=('linux%') # '%' gets replaced with _kernelname @@ -51,12 +51,7 @@ source=( '0006-set-default-cubietruck-led-triggers.patch' '0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch' '0008-ARM-dove-enable-ethernet-on-D3Plug.patch' - '0009-power-add-power-sequence-library.patch' - '0010-usb-core-add-power-sequence-handling-for-USB-devices.patch' - '0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch' - '0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch' - '0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch' - '0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch' + '0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch' # other patches '0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch' '0002-fix-Atmel-maXTouch-touchscreen-support.patch' @@ -68,11 +63,11 @@ validpgpkeys=( '6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78' # David P. 'E240B57E2C4630BA768E2F26FC1B547C8D8172C8' # Levente Polyak ) -sha512sums=('0c221c6e84eb5bc270ef79454bf407079daed84534afb1d449d40fa46e42868a471d3063016a4eb3f68d42879e18ee314ab30716116805fee35b5084b23df2a9' +sha512sums=('5bc800b3beff43a8c15bd5515f4e0babe2beb5fa600491b7b37110e22d9b739d293f1e38753ed681be289c51390e0e64b3e60ce0db0a3bfe1f94ee5c014579a3' 'SKIP' - '72486a515539b2420daa6fb41c41f5994dbc4572bdacd80f75fb965398b6e12ed06c491ddab263adc36c5d48da52e1b5cf1145f4f808665dffc64ba16bfc90d4' + 'dbb9b21c9c89e199ea6e719287f3ef1b7c07dfbda55108216499dfd1f981d80777dde191132417502772a25615511e9ae58a3f7efcf2f023d6a41d734a3099a9' 'SKIP' - '60ac5793455044f8d1acf9c09397168b2f43c964e43941dbfccc6c7a05bb2288a9ab74147a76da4015e0b5ead18d6f598443ef04ebf14fd231e7746fc8bf6b9a' + '1250a7bf66b08190f1788a6e123ed5e45d402846af301b2a257f2068f77b34f685f61b0f241d7aac9b46d5ab7402d49646ec25760884474bba5367b004bb61fc' 'SKIP' '13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3' 'SKIP' @@ -80,32 +75,27 @@ sha512sums=('0c221c6e84eb5bc270ef79454bf407079daed84534afb1d449d40fa46e42868a471 'SKIP' '7a3716bfe3b9f546da309c7492f3e08f8f506813afeb1c737a474c83313d5c313cf4582b65215c2cfce3b74d9d1021c96e8badafe8f6e5b01fe28d2b5c61ae78' 'SKIP' - '4d85d5d680a695e80504e6a22a102dbc7285ad9ff56a53c23ecaebbe3088e150f6815e90ade3fa8296e6185c8cd658d06c56457ac850d58d1004976603e9f5f5' - '1ab1118eac9782c659cf73e54204b11a1582a53b72f9f48c8a25e3da832e7037b1e4db16f4e8e37f2a60216a5254dcd9307323c4dc9290e705fd373da4bb8c8a' - 'f02b7f7128899ac170fd5856727537b9b0abc4ba17c6b8d7992a1d6e5bc0492e5accf6f5014172327959f5753b0adc0283c8e76e1cf154f389e4a5f4787e7304' + '59a6607ce29b07faeae01a4678bd3be033db850debda0704f971aa3cbfdf50783e27586e90368dbc75f4f9033a687c2e1b52705b836aa62b856c74f73284f03b' + '826c4567dd3ff3be5c879320421fd73565d12705c0a894e0beff597e5183e88b4df1d8206b5a2f42ff46b22badb207d106cc687e3df85fb20a49dc4e986732b6' + '1f2a5c3d647f97af6bc8db2454e22802d6e802fe201884a29043d57b0531b01ad74d1624580f685f7774f70db0568e809ccb0ddeaac0ddd5f4b0951674c30588' '7ad5be75ee422dda3b80edd2eb614d8a9181e2c8228cd68b3881e2fb95953bf2dea6cbe7900ce1013c9de89b2802574b7b24869fc5d7a95d3cc3112c4d27063a' - '4a8b324aee4cccf3a512ad04ce1a272d14e5b05c8de90feb82075f55ea3845948d817e1b0c6f298f5816834ddd3e5ce0a0e2619866289f3c1ab8fd2f35f04f44' + '2718b58dbbb15063bacb2bde6489e5b3c59afac4c0e0435b97fe720d42c711b6bcba926f67a8687878bd51373c9cf3adb1915a11666d79ccb220bf36e0788ab7' '2dc6b0ba8f7dbf19d2446c5c5f1823587de89f4e28e9595937dd51a87755099656f2acec50e3e2546ea633ad1bfd1c722e0c2b91eef1d609103d8abdc0a7cbaf' - '41d00af3409e8ae91aa0423ef73a5d4c5ed4ba4e2244ef37d8b8a3c8d4e379c26e45fef21274d8e2c795ef545a3212b735fc1b5b5a8b6338c8a72ca29c5167c0' + 'fa32060ea7a44b94ce8ddc0c204a2ef1ec58551dfa20f94cd0237218c605e23783ff5aa0d2f802c40e58cef1502f0a770e34ac3302c40b5fba46d71ea9f75529' 'SKIP' - '8a12b4477f716214266b83785335515bc0d1b1ee5c728803945e0db613caca2df02939a681716cbb51039f9a003c7e7048d882271691fd8c20f273a4a8b78f01' - '47838b54f76595fd0dda8699bccf55aeefbe9031da965b50fadf2a8f8bb34c2e12b8c4b29cca5f6e6b3ce2704464dc1966565185641ab1b64ce2575591a79de7' - '067ed33621353496c19b88746b9b1ab875e8a1bde3954f4aa4e8c353389e0d15551e4edaa173e98f8dfe48877b7edec40abc68f423511dcaf5db81d998560acf' - 'cec08c029509c6c07f1addb6ac1338b61ded296eac5dd3d66449429090ae0743a09cf93d8da46082784e463ee44d42fea669d362cec8ef36aa0527a0a20f1271' - '4cd1491b69a130f7e0a2bf93c542f962e50ed2b727a96b71bfe5c2444db1abf5dba559135feecc3c02e122f717a71982d73f7432fefa9da309ce2406add591e5' - '796e6808297a9e037c9a8912d796347f83d2c17e0162920a792216e3d6ef0e860a93c1a2c41797f1fa59cbbcaa2ace7a088ebc36dcb699ee17b95a47e39f2dda' - '41a5f8d2fd1d82fac38afb8b15631d35d9a15f779cf60963943af2807b8caf40461e212bd0081b46dd39e08d3a4ad94910700ab4bee8460fe99d725a22f7b1e2' - 'e18ab92d1c4fcc9782ad9fdb456d3be397e17f9ec5e897242ba891c9cbb738bc616981447a7593bb907c5dd231035b000282e0e6f522cd6921a200d3b089aec8' - '85551c55a66885d765808ceb2c7f31cd911ec7c42212a7801883cee35881171de4d26d053d6c62cbec4474c437061e05ac5857b5038e64b7c14e7df3bb5985b1' - 'a690b4ae030fe9657b2629bbe8d38b74415db06f293d0413c74b5ef88f85693f61926ff9b83fbd099ae25a11bf03b9f7cdf947ae2c52434282b3a583b280d78c' - '28d26ca6ffc095cac0574fadb7621ea0674d542deee3bb03d251ee3a6597107002cd24d88850ca9e0a987438c86b4c61b0d146d09f29bf57ca21f04e733b6865' - 'e1b00e33bcdbc663041df21a2fa84743eebaf904204ea9b7458e4dde7bc61b17faa22c09038283e26291458427ebd9a53bf463b1bc8bc28d147d1a186426b232' - 'c3a3ceed29b8513f478cad877507c7d2171453d24346c4d62ebf34c3f35ed13ebce2ca6f7200e97693ea900f504528685fe5b59c641ccfe36bc9bc257106f157' - '073c48fea2989334451b9020e8151c0385b07affcb2bc5f778fd5f9d2d8182e40dcd04edde4d53648c1ed8cea4721afc04267a72e429be3612d2f77f5d0fd459' + '60aa432465eb3ac10f565799d3dfecea21aaf08e83909c1161d9359e932626edbd1353e712d616c3d785c65a0f699e9c45df35bd9e86365c25399c6b2d45b9e4' + '86809feb5ae2759b449ec0cb7a6b3fb457874ed82a72dfda00607e8819c804a0714b5d6a17cbbba44996a36872224af42d1b85f1b3932f43bccb419041d25dc7' + '746acff348d62b3ed4e62cd9976ddf0af47f87bd3cffda90cbb00a6b57d589ccb681fcd9541ee5bdd179d95dad71d57c77cb1a60faee1c6cef518e4055c3456f' + 'c945e871fa456b521ced77cae9081bcdc47d836ecdabe6766e373681fe11fda3e5a7a3c16f70c586be64a1eb5c9136c43b0a44df897298940fd8703b50b0a543' + '054e98a2d1ea83cece1fe55ae087b282f25593022f252c74612d4aeb2a547f84ea626e3d982098ca798271af55f3b733ac2aea2fc0d9cad031802d2901dfe4ca' + '4433f9e780a72347313916c8a9cbcbce3a8c40e1b299e887dc748d257879fb5fab8f1683936339f73a4d4b4ef668b1ed6cc0d9a19ed4bd99039a1613ac08610e' + 'd1361d23ae79599e3fa94cba206bd40764f9eee0c584e639af13828dabb7f0dfa361792c098b5afae0bb350407b2dc47a1d67580daeade7a4f3e3e55e42c8470' + 'c1653f91067d31801a23450175e47968add147477caf20aec6092831739641312f4ad995af43c7e55545007279016b5f62a0720d31e4591b4421a65b8bd5b398' + 'a123747792417d3760ca40d7f913c2cdd194da2ea5778352eedebc80097b7b8dce4428a8fe8bd75cab92972f599c25bcf18a740856fc2990351234b0d7ebf9f5' '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af' 'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168' - '78b8020105e7aafb84f32de6a7fb12b5dcb466f1d36d5188d78064d3d11a2a996a7ea4c7f9ba8a927fb9e4bbbfc6ac2913d03aa8b8257d8a771a93b7b8658092') - + 'ba561ef861c56002de25ec6f63211e758f3d26eaa7ff0e4a16ffd096d5fe7019d9df343658adc0535684303888d022aa816fc0b282da27ac1ca29dfc0b0e2be0') + _kernelname=${pkgbase#linux-libre} _replacesarchkernel=("${_replacesarchkernel[@]/\%/${_kernelname}}") _replacesoldkernels=("${_replacesoldkernels[@]/\%/${_kernelname}}") @@ -140,12 +130,7 @@ prepare() { patch -p1 -i ../0006-set-default-cubietruck-led-triggers.patch patch -p1 -i ../0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch patch -p1 -i ../0008-ARM-dove-enable-ethernet-on-D3Plug.patch - patch -p1 -i ../0009-power-add-power-sequence-library.patch - patch -p1 -i ../0010-usb-core-add-power-sequence-handling-for-USB-devices.patch - patch -p1 -i ../0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch - patch -p1 -i ../0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch - patch -p1 -i ../0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch - patch -p1 -i ../0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch + patch -p1 -i ../0009-usb-dwc2-disable-power_down-on-rockchip-devices.patch fi # add freedo as boot logo @@ -155,8 +140,6 @@ prepare() { if [ "$CARCH" = "x86_64" ]; then # add linux-hardened patch patch -p1 -i ../linux-hardened-${_srcver%-*}.${_hardenedver}.patch - - # Arch's linux-hardened patches else # Arch's linux patches patch -p1 -i ../0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch @@ -187,7 +170,7 @@ prepare() { build() { cd $_srcname if [ "$CARCH" = "armv7h" ]; then - make $MAKEFLAGS zImage modules dtbs htmldocs + make zImage modules dtbs htmldocs elif [ "$CARCH" = "x86_64" ] || [ "$CARCH" = "i686" ]; then make bzImage modules htmldocs fi @@ -209,20 +192,20 @@ _package() { install=linux.install local kernver="$(