From 027e78f5c797eba3df43e8b47c03f3ba7bc20e64 Mon Sep 17 00:00:00 2001 From: David P Date: Thu, 5 Apr 2018 17:46:32 -0300 Subject: upgpkg: kernels/linux-libre-lts-xtreme 4.9.92_gnu-1 This kernel will remain in the 4.9.x generation because it's the latest version supported by the TCP Stealth patch --- ...RM-atags-add-support-for-Marvell-s-u-boot.patch | 12 +- ...to-disallow-unprivileged-CLONE_NEWUSER-by.patch | 103 +++ ...dt-retrieve-MAC-addresses-from-Marvell-bo.patch | 14 +- ...p-Only-use-the-alternate-fixed-mode-if-it.patch | 42 ++ .../0003-SMILE-Plug-device-tree-file.patch | 10 +- .../0004-fix-mvsdio-eMMC-timing.patch | 8 +- ...x-Allow-mac-address-to-be-set-as-a-parame.patch | 7 +- .../0006-set-default-cubietruck-led-triggers.patch | 12 +- ...odroid-set-higher-minimum-buck2-regulator.patch | 10 +- .../0008-disable-USB3-port-on-ODROID-XU.patch | 27 + .../0009-ARM-dove-enable-ethernet-on-D3Plug.patch | 31 + .../0010-power-add-power-sequence-library.patch | 790 +++++++++++++++++++++ ...d-power-sequence-handling-for-USB-devices.patch | 164 +++++ ...imx6qdl-Enable-usb-node-children-with-reg.patch | 49 ++ ...6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch | 80 +++ ...-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch | 74 ++ kernels/linux-libre-lts-xtreme/60-linux.hook | 12 + kernels/linux-libre-lts-xtreme/90-linux.hook | 2 +- kernels/linux-libre-lts-xtreme/PKGBUILD | 434 ++++++----- .../change-default-console-loglevel.patch | 11 - kernels/linux-libre-lts-xtreme/config.armv7h | 24 +- kernels/linux-libre-lts-xtreme/config.i686 | 25 +- kernels/linux-libre-lts-xtreme/config.x86_64 | 26 +- kernels/linux-libre-lts-xtreme/linux.install | 19 - 24 files changed, 1638 insertions(+), 348 deletions(-) create mode 100644 kernels/linux-libre-lts-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch create mode 100644 kernels/linux-libre-lts-xtreme/0002-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch create mode 100644 kernels/linux-libre-lts-xtreme/0008-disable-USB3-port-on-ODROID-XU.patch create mode 100644 kernels/linux-libre-lts-xtreme/0009-ARM-dove-enable-ethernet-on-D3Plug.patch create mode 100644 kernels/linux-libre-lts-xtreme/0010-power-add-power-sequence-library.patch create mode 100644 kernels/linux-libre-lts-xtreme/0011-usb-core-add-power-sequence-handling-for-USB-devices.patch create mode 100644 kernels/linux-libre-lts-xtreme/0012-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch create mode 100644 kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch create mode 100644 kernels/linux-libre-lts-xtreme/0014-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch create mode 100644 kernels/linux-libre-lts-xtreme/60-linux.hook delete mode 100644 kernels/linux-libre-lts-xtreme/change-default-console-loglevel.patch (limited to 'kernels') diff --git a/kernels/linux-libre-lts-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/kernels/linux-libre-lts-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch index a63d09020..8df0c4761 100644 --- a/kernels/linux-libre-lts-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch +++ b/kernels/linux-libre-lts-xtreme/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch @@ -1,7 +1,7 @@ -From 043141070b13388a29ce9f73d1378db6fee9ea00 Mon Sep 17 00:00:00 2001 +From e1c642a72eb85ec98e1903f9391fb29076234369 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:59:28 +0100 -Subject: [PATCH 1/7] ARM: atags: add support for Marvell's u-boot +Subject: [PATCH 01/14] ARM: atags: add support for Marvell's u-boot Marvell uses a specific atag in its u-boot which includes among other information the MAC addresses for up to 4 network interfaces. @@ -12,10 +12,10 @@ Signed-off-by: Willy Tarreau 1 file changed, 17 insertions(+) diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h -index 979ff4016404..d1d0c1950fa4 100644 +index 6b335a9ff8c8..614150b53643 100644 --- a/arch/arm/include/uapi/asm/setup.h +++ b/arch/arm/include/uapi/asm/setup.h -@@ -143,6 +143,18 @@ struct tag_memclk { +@@ -144,6 +144,18 @@ struct tag_memclk { __u32 fmemclk; }; @@ -34,7 +34,7 @@ index 979ff4016404..d1d0c1950fa4 100644 struct tag { struct tag_header hdr; union { -@@ -165,6 +177,11 @@ struct tag { +@@ -166,6 +178,11 @@ struct tag { * DC21285 specific */ struct tag_memclk memclk; @@ -47,5 +47,5 @@ index 979ff4016404..d1d0c1950fa4 100644 }; -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch b/kernels/linux-libre-lts-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch new file mode 100644 index 000000000..a989d666a --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0001-add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by.patch @@ -0,0 +1,103 @@ +From 4e54373158caa50df5402fdd3db1794c5394026b Mon Sep 17 00:00:00 2001 +Message-Id: <4e54373158caa50df5402fdd3db1794c5394026b.1516188238.git.jan.steffens@gmail.com> +From: Serge Hallyn +Date: Fri, 31 May 2013 19:12:12 +0100 +Subject: [PATCH 1/4] add sysctl to disallow unprivileged CLONE_NEWUSER by + default + +Signed-off-by: Serge Hallyn +[bwh: Remove unneeded binary sysctl bits] +Signed-off-by: Daniel Micay +--- + kernel/fork.c | 15 +++++++++++++++ + kernel/sysctl.c | 12 ++++++++++++ + kernel/user_namespace.c | 3 +++ + 3 files changed, 30 insertions(+) + +diff --git a/kernel/fork.c b/kernel/fork.c +index 500ce64517d9..35f5860958b4 100644 +--- a/kernel/fork.c ++++ b/kernel/fork.c +@@ -102,6 +102,11 @@ + + #define CREATE_TRACE_POINTS + #include ++#ifdef CONFIG_USER_NS ++extern int unprivileged_userns_clone; ++#else ++#define unprivileged_userns_clone 0 ++#endif + + /* + * Minimum number of threads to boot the kernel +@@ -1554,6 +1559,10 @@ static __latent_entropy struct task_struct *copy_process( + if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS)) + return ERR_PTR(-EINVAL); + ++ if ((clone_flags & CLONE_NEWUSER) && !unprivileged_userns_clone) ++ if (!capable(CAP_SYS_ADMIN)) ++ return ERR_PTR(-EPERM); ++ + /* + * Thread groups must share signals as well, and detached threads + * can only be started up within the thread group. +@@ -2347,6 +2356,12 @@ SYSCALL_DEFINE1(unshare, unsigned long, unshare_flags) + if (unshare_flags & CLONE_NEWNS) + unshare_flags |= CLONE_FS; + ++ if ((unshare_flags & CLONE_NEWUSER) && !unprivileged_userns_clone) { ++ err = -EPERM; ++ if (!capable(CAP_SYS_ADMIN)) ++ goto bad_unshare_out; ++ } ++ + err = check_unshare_flags(unshare_flags); + if (err) + goto bad_unshare_out; +diff --git a/kernel/sysctl.c b/kernel/sysctl.c +index 56aca862c4f5..e8402ba393c1 100644 +--- a/kernel/sysctl.c ++++ b/kernel/sysctl.c +@@ -105,6 +105,9 @@ extern int core_uses_pid; + extern char core_pattern[]; + extern unsigned int core_pipe_limit; + #endif ++#ifdef CONFIG_USER_NS ++extern int unprivileged_userns_clone; ++#endif + extern int pid_max; + extern int pid_max_min, pid_max_max; + extern int percpu_pagelist_fraction; +@@ -513,6 +516,15 @@ static struct ctl_table kern_table[] = { + .proc_handler = proc_dointvec, + }, + #endif ++#ifdef CONFIG_USER_NS ++ { ++ .procname = "unprivileged_userns_clone", ++ .data = &unprivileged_userns_clone, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = proc_dointvec, ++ }, ++#endif + #ifdef CONFIG_PROC_SYSCTL + { + .procname = "tainted", +diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c +index c490f1e4313b..dd03bd39d7bf 100644 +--- a/kernel/user_namespace.c ++++ b/kernel/user_namespace.c +@@ -24,6 +24,9 @@ + #include + #include + ++/* sysctl */ ++int unprivileged_userns_clone; ++ + static struct kmem_cache *user_ns_cachep __read_mostly; + static DEFINE_MUTEX(userns_state_mutex); + +-- +2.15.1 + diff --git a/kernels/linux-libre-lts-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/kernels/linux-libre-lts-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch index f7d3a9bc6..1f782d2b4 100644 --- a/kernels/linux-libre-lts-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch +++ b/kernels/linux-libre-lts-xtreme/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch @@ -1,8 +1,8 @@ -From 278772450de941a06782c07a43e7511b6bdbf430 Mon Sep 17 00:00:00 2001 +From d52721ca6718ac91256b3073dd6a4749940bc0d3 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:56:58 +0100 -Subject: [PATCH 2/7] ARM: atags/fdt: retrieve MAC addresses from Marvell boot - loader +Subject: [PATCH 02/14] ARM: atags/fdt: retrieve MAC addresses from Marvell + boot loader The atags are parsed and if a Marvell atag is found, up to 4 MAC addresses are extracted there and assigned to node aliases eth0..3 @@ -17,10 +17,10 @@ Signed-off-by: Willy Tarreau 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c -index 9448aa0c6686..ac7b6ae6c00f 100644 +index 41fa7316c52b..807ed160a4b9 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -18,7 +18,7 @@ static int node_offset(void *fdt, const char *node_path) +@@ -19,7 +19,7 @@ static int node_offset(void *fdt, const char *node_path) } static int setprop(void *fdt, const char *node_path, const char *property, @@ -29,7 +29,7 @@ index 9448aa0c6686..ac7b6ae6c00f 100644 { int offset = node_offset(fdt, node_path); if (offset < 0) -@@ -179,6 +179,12 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) +@@ -180,6 +180,12 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) initrd_start); setprop_cell(fdt, "/chosen", "linux,initrd-end", initrd_start + initrd_size); @@ -43,5 +43,5 @@ index 9448aa0c6686..ac7b6ae6c00f 100644 } -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0002-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch b/kernels/linux-libre-lts-xtreme/0002-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch new file mode 100644 index 000000000..f77c9b5c1 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0002-drm-i915-edp-Only-use-the-alternate-fixed-mode-if-it.patch @@ -0,0 +1,42 @@ +From e722c8d112f0aa9621d7d4da5223cfc7aeb45e88 Mon Sep 17 00:00:00 2001 +Message-Id: +In-Reply-To: <4e54373158caa50df5402fdd3db1794c5394026b.1516188238.git.jan.steffens@gmail.com> +References: <4e54373158caa50df5402fdd3db1794c5394026b.1516188238.git.jan.steffens@gmail.com> +From: Jim Bride +Date: Mon, 6 Nov 2017 13:38:57 -0800 +Subject: [PATCH 4/4] drm/i915/edp: Only use the alternate fixed mode if it's + asked for + +In commit dc911f5bd8aa ("drm/i915/edp: Allow alternate fixed mode for +eDP if available."), the patch allows for the use of an alternate fixed +mode if it is available, but the patch was not ensuring that the only +time the alternate mode is used is when it is specifically requested. +This patch adds an additional comparison to intel_edp_compare_alt_mode +to ensure that we only use the alternate mode if it is directly +requested. + +Fixes: dc911f5bd8aac ("Allow alternate fixed mode for eDP if available.") +Cc: David Weinehall +Cc: Rodrigo Vivi +Signed-off-by: Jim Bride +--- + drivers/gpu/drm/i915/intel_dp.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c +index 09f274419eea..838cee312e8e 100644 +--- a/drivers/gpu/drm/i915/intel_dp.c ++++ b/drivers/gpu/drm/i915/intel_dp.c +@@ -1632,7 +1632,8 @@ static bool intel_edp_compare_alt_mode(struct drm_display_mode *m1, + m1->vdisplay == m2->vdisplay && + m1->vsync_start == m2->vsync_start && + m1->vsync_end == m2->vsync_end && +- m1->vtotal == m2->vtotal); ++ m1->vtotal == m2->vtotal && ++ m1->vrefresh == m2->vrefresh); + return bres; + } + +-- +2.15.1 + diff --git a/kernels/linux-libre-lts-xtreme/0003-SMILE-Plug-device-tree-file.patch b/kernels/linux-libre-lts-xtreme/0003-SMILE-Plug-device-tree-file.patch index 980a1fc2d..e6cab4cd4 100644 --- a/kernels/linux-libre-lts-xtreme/0003-SMILE-Plug-device-tree-file.patch +++ b/kernels/linux-libre-lts-xtreme/0003-SMILE-Plug-device-tree-file.patch @@ -1,7 +1,7 @@ -From db678c33357f6349df02b0f4979fc8c9ee365697 Mon Sep 17 00:00:00 2001 +From f8f42603eeec186337ebab563de5b91ae6050de6 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:41:19 -0600 -Subject: [PATCH 3/7] SMILE Plug device tree file +Subject: [PATCH 03/14] SMILE Plug device tree file This adds a dts file for the SMILE Plug, which only differs from the Mirabox dts with the LED definitions. @@ -14,10 +14,10 @@ Signed-off-by: Kevin Mihelich create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index faf46abaa4a2..aecdcfa7a67b 100644 +index d0381e9caf21..e142999e7cff 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -1010,6 +1010,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ +@@ -1046,6 +1046,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ @@ -205,5 +205,5 @@ index 000000000000..d01308ab848b + }; +}; -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0004-fix-mvsdio-eMMC-timing.patch b/kernels/linux-libre-lts-xtreme/0004-fix-mvsdio-eMMC-timing.patch index 41b592420..842dfcd77 100644 --- a/kernels/linux-libre-lts-xtreme/0004-fix-mvsdio-eMMC-timing.patch +++ b/kernels/linux-libre-lts-xtreme/0004-fix-mvsdio-eMMC-timing.patch @@ -1,7 +1,7 @@ -From 1b4696de4df2ebd2d2a0da05a284705e11427e06 Mon Sep 17 00:00:00 2001 +From c6275cb1cf73c56e9c2e74ae7c41abf3b70cb5ae Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:43:56 -0600 -Subject: [PATCH 4/7] fix mvsdio eMMC timing +Subject: [PATCH 04/14] fix mvsdio eMMC timing These changes from Globalscale change the MMC timing to allow the eMMC versions of the Mirabox and SMILE Plug to work. @@ -12,7 +12,7 @@ Signed-off-by: Kevin Mihelich 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c -index 58d74b8d6c79..c9715530d676 100644 +index 210247b3d11a..1a1802dc9ef4 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -93,7 +93,7 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) @@ -34,5 +34,5 @@ index 58d74b8d6c79..c9715530d676 100644 host->clock = ios->clock; host->ns_per_clk = 1000000000 / (host->base_clock / (m+1)); -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/kernels/linux-libre-lts-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch index 788a14239..ad19d606d 100644 --- a/kernels/linux-libre-lts-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch +++ b/kernels/linux-libre-lts-xtreme/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch @@ -1,7 +1,8 @@ -From ffd117b73c6a0185d3089ec9abee06122e88eecb Mon Sep 17 00:00:00 2001 +From 0764c77a4c04d9e7d770e62ac6f8edac76a39183 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 18 Feb 2014 01:43:50 -0300 -Subject: [PATCH 5/7] net/smsc95xx: Allow mac address to be set as a parameter +Subject: [PATCH 05/14] net/smsc95xx: Allow mac address to be set as a + parameter --- drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ @@ -91,5 +92,5 @@ index 309b88acd3d0..7bc9feb891a1 100644 /* maybe the boot loader passed the MAC address in devicetree */ -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0006-set-default-cubietruck-led-triggers.patch b/kernels/linux-libre-lts-xtreme/0006-set-default-cubietruck-led-triggers.patch index 4819bd700..ff270752a 100644 --- a/kernels/linux-libre-lts-xtreme/0006-set-default-cubietruck-led-triggers.patch +++ b/kernels/linux-libre-lts-xtreme/0006-set-default-cubietruck-led-triggers.patch @@ -1,7 +1,7 @@ -From e2567ba6352c663819406b73d4aa3aa31ad4ca06 Mon Sep 17 00:00:00 2001 +From 8049afc8467f9f7fdeb3b7db97e0e8c64805e867 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sat, 14 Feb 2015 12:32:27 +0100 -Subject: [PATCH 6/7] set default cubietruck led triggers +Subject: [PATCH 06/14] set default cubietruck led triggers Signed-off-by: Kevin Mihelich --- @@ -9,10 +9,10 @@ Signed-off-by: Kevin Mihelich 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index 852a0aa24dce..82c963629a55 100644 +index 8c9bedc602ec..b3a765ba03fd 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -69,6 +69,7 @@ +@@ -80,6 +80,7 @@ blue { label = "cubietruck:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; @@ -20,7 +20,7 @@ index 852a0aa24dce..82c963629a55 100644 }; orange { -@@ -84,6 +85,7 @@ +@@ -95,6 +96,7 @@ green { label = "cubietruck:green:usr"; gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; @@ -29,5 +29,5 @@ index 852a0aa24dce..82c963629a55 100644 }; -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch b/kernels/linux-libre-lts-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch index edc81ae30..a8836586a 100644 --- a/kernels/linux-libre-lts-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch +++ b/kernels/linux-libre-lts-xtreme/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch @@ -1,7 +1,7 @@ -From dc9e6fcc9675737091fb99550b361aea81a94b90 Mon Sep 17 00:00:00 2001 +From fa5e1322788ebe804da87c671b6491b21d143d18 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Thu, 11 Aug 2016 00:42:37 -0600 -Subject: [PATCH 7/7] exynos4412-odroid: set higher minimum buck2 regulator +Subject: [PATCH 07/14] exynos4412-odroid: set higher minimum buck2 regulator voltage Set a higher minimum voltage to help reboot issue. @@ -13,10 +13,10 @@ Signed-off-by: Kevin Mihelich 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi -index 102acd78be15..5b65992e5667 100644 +index a21be71000c1..65cdf0d9c512 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi -@@ -423,7 +423,7 @@ +@@ -421,7 +421,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; @@ -26,5 +26,5 @@ index 102acd78be15..5b65992e5667 100644 regulator-always-on; regulator-boot-on; -- -2.14.2 +2.16.1 diff --git a/kernels/linux-libre-lts-xtreme/0008-disable-USB3-port-on-ODROID-XU.patch b/kernels/linux-libre-lts-xtreme/0008-disable-USB3-port-on-ODROID-XU.patch new file mode 100644 index 000000000..868d3d5f1 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0008-disable-USB3-port-on-ODROID-XU.patch @@ -0,0 +1,27 @@ +From f9e3db4a1d7ec8578be2012ca727c8a2259f8de8 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich +Date: Sat, 25 Feb 2017 19:39:51 -0700 +Subject: [PATCH 08/14] disable USB3 port on ODROID-XU + +Ports report over-current condition and are non-operable. + +Signed-off-by: Kevin Mihelich +--- + arch/arm/boot/dts/exynos5410-odroidxu.dts | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts +index a45eaae33f8f..7f7de094724e 100644 +--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts ++++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts +@@ -630,6 +630,7 @@ + + &usbdrd_dwc3_0 { + dr_mode = "host"; ++ status = "disabled"; + }; + + &usbdrd_dwc3_1 { +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0009-ARM-dove-enable-ethernet-on-D3Plug.patch b/kernels/linux-libre-lts-xtreme/0009-ARM-dove-enable-ethernet-on-D3Plug.patch new file mode 100644 index 000000000..a1c658823 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0009-ARM-dove-enable-ethernet-on-D3Plug.patch @@ -0,0 +1,31 @@ +From 0025f973fdfa0c4409439ee65a4c074241e1d210 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich +Date: Sun, 7 May 2017 13:32:25 -0600 +Subject: [PATCH 09/14] ARM: dove: enable ethernet on D3Plug + +Signed-off-by: Kevin Mihelich +--- + arch/arm/boot/dts/dove-d3plug.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts +index 826026c28f90..a4c9963e1261 100644 +--- a/arch/arm/boot/dts/dove-d3plug.dts ++++ b/arch/arm/boot/dts/dove-d3plug.dts +@@ -61,6 +61,13 @@ + &uart0 { status = "okay"; }; + &sata0 { status = "okay"; }; + &i2c0 { status = "okay"; }; ++&mdio { status = "okay"; }; ++ð { status = "okay"; }; ++ ++ðphy { ++ compatible = "marvell,88e1310"; ++ reg = <1>; ++}; + + /* Samsung M8G2F eMMC */ + &sdio0 { +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0010-power-add-power-sequence-library.patch b/kernels/linux-libre-lts-xtreme/0010-power-add-power-sequence-library.patch new file mode 100644 index 000000000..74d8a615d --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0010-power-add-power-sequence-library.patch @@ -0,0 +1,790 @@ +From c63f0d2231c841534a30c60db102ad9afc835994 Mon Sep 17 00:00:00 2001 +From: Peter Chen +Date: Wed, 21 Jun 2017 14:42:03 +0800 +Subject: [PATCH 10/14] power: add power sequence library + +We have an well-known problem that the device needs to do some power +sequence before it can be recognized by related host, the typical +example like hard-wired mmc devices and usb devices. + +This power sequence is hard to be described at device tree and handled by +related host driver, so we have created a common power sequence +library to cover this requirement. The core code has supplied +some common helpers for host driver, and individual power sequence +libraries handle kinds of power sequence for devices. The pwrseq +librares always need to allocate extra instance for compatible +string match. + +pwrseq_generic is intended for general purpose of power sequence, which +handles gpios and clocks currently, and can cover other controls in +future. The host driver just needs to call of_pwrseq_on/of_pwrseq_off +if only one power sequence is needed, else call of_pwrseq_on_list +/of_pwrseq_off_list instead (eg, USB hub driver). + +For new power sequence library, it needs to add its compatible string +and allocation function at pwrseq_match_table_list, then the pwrseq +core will match it with DT's, and choose this library at runtime. + +Signed-off-by: Peter Chen +Tested-by: Maciej S. Szmigiero +Tested-by Joshua Clayton +Reviewed-by: Matthias Kaehlcke +Tested-by: Matthias Kaehlcke +--- + Documentation/power/power-sequence/design.rst | 54 +++++ + MAINTAINERS | 9 + + drivers/power/Kconfig | 1 + + drivers/power/Makefile | 1 + + drivers/power/pwrseq/Kconfig | 20 ++ + drivers/power/pwrseq/Makefile | 2 + + drivers/power/pwrseq/core.c | 293 ++++++++++++++++++++++++++ + drivers/power/pwrseq/pwrseq_generic.c | 210 ++++++++++++++++++ + include/linux/power/pwrseq.h | 84 ++++++++ + 9 files changed, 674 insertions(+) + create mode 100644 Documentation/power/power-sequence/design.rst + create mode 100644 drivers/power/pwrseq/Kconfig + create mode 100644 drivers/power/pwrseq/Makefile + create mode 100644 drivers/power/pwrseq/core.c + create mode 100644 drivers/power/pwrseq/pwrseq_generic.c + create mode 100644 include/linux/power/pwrseq.h + +diff --git a/Documentation/power/power-sequence/design.rst b/Documentation/power/power-sequence/design.rst +new file mode 100644 +index 000000000000..554608e5f3b6 +--- /dev/null ++++ b/Documentation/power/power-sequence/design.rst +@@ -0,0 +1,54 @@ ++==================================== ++Power Sequence Library ++==================================== ++ ++:Date: Feb, 2017 ++:Author: Peter Chen ++ ++ ++Introduction ++============ ++ ++We have an well-known problem that the device needs to do a power ++sequence before it can be recognized by related host, the typical ++examples are hard-wired mmc devices and usb devices. The host controller ++can't know what kinds of this device is in its bus if the power ++sequence has not done, since the related devices driver's probe calling ++is determined by runtime according to eunumeration results. Besides, ++the devices may have custom power sequence, so the power sequence library ++which is independent with the devices is needed. ++ ++Design ++============ ++ ++The power sequence library includes the core file and customer power ++sequence library. The core file exports interfaces are called by ++host controller driver for power sequence and customer power sequence ++library files to register its power sequence instance to global ++power sequence list. The custom power sequence library creates power ++sequence instance and implement custom power sequence. ++ ++Since the power sequence describes hardware design, the description is ++located at board description file, eg, device tree dts file. And ++a specific power sequence belongs to device, so its description ++is under the device node, please refer to: ++Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt ++ ++Custom power sequence library allocates one power sequence instance at ++bootup periods using postcore_initcall, this static allocated instance is ++used to compare with device-tree (DT) node to see if this library can be ++used for the node or not. When the result is matched, the core API will ++try to get resourses (->get, implemented at each library) for power ++sequence, if all resources are got, it will try to allocate another ++instance for next possible request from host driver. ++ ++Then, the host controller driver can carry out power sequence on for this ++DT node, the library will do corresponding operations, like open clocks, ++toggle gpio, etc. The power sequence off routine will close and free the ++resources, and is called when the parent is removed. And the power ++sequence suspend and resume routine can be called at host driver's ++suspend and resume routine if needed. ++ ++The exported interfaces ++.. kernel-doc:: drivers/power/pwrseq/core.c ++ :export: +diff --git a/MAINTAINERS b/MAINTAINERS +index 845fc25812f1..c0925efb554c 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -10898,6 +10898,15 @@ F: drivers/firmware/psci*.c + F: include/linux/psci.h + F: include/uapi/linux/psci.h + ++POWER SEQUENCE LIBRARY ++M: Peter Chen ++T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git ++L: linux-pm@vger.kernel.org ++S: Maintained ++F: Documentation/devicetree/bindings/power/pwrseq/ ++F: drivers/power/pwrseq/ ++F: include/linux/power/pwrseq.h ++ + POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS + M: Sebastian Reichel + L: linux-pm@vger.kernel.org +diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig +index 63454b5cac27..c1bb0465f956 100644 +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -1,3 +1,4 @@ + source "drivers/power/avs/Kconfig" + source "drivers/power/reset/Kconfig" + source "drivers/power/supply/Kconfig" ++source "drivers/power/pwrseq/Kconfig" +diff --git a/drivers/power/Makefile b/drivers/power/Makefile +index ff35c712d824..7db80354b691 100644 +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -1,3 +1,4 @@ + obj-$(CONFIG_POWER_AVS) += avs/ + obj-$(CONFIG_POWER_RESET) += reset/ + obj-$(CONFIG_POWER_SUPPLY) += supply/ ++obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ +diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig +new file mode 100644 +index 000000000000..c6b356926cca +--- /dev/null ++++ b/drivers/power/pwrseq/Kconfig +@@ -0,0 +1,20 @@ ++# ++# Power Sequence library ++# ++ ++menuconfig POWER_SEQUENCE ++ bool "Power sequence control" ++ help ++ It is used for drivers which needs to do power sequence ++ (eg, turn on clock, toggle reset gpio) before the related ++ devices can be found by hardware, eg, USB bus. ++ ++if POWER_SEQUENCE ++ ++config PWRSEQ_GENERIC ++ bool "Generic power sequence control" ++ depends on OF ++ help ++ This is the generic power sequence control library, and is ++ supposed to support common power sequence usage. ++endif +diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile +new file mode 100644 +index 000000000000..ad82389028c2 +--- /dev/null ++++ b/drivers/power/pwrseq/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_POWER_SEQUENCE) += core.o ++obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o +diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c +new file mode 100644 +index 000000000000..6b78a6691683 +--- /dev/null ++++ b/drivers/power/pwrseq/core.c +@@ -0,0 +1,293 @@ ++/* ++ * core.c power sequence core file ++ * ++ * Copyright (C) 2016 Freescale Semiconductor, Inc. ++ * Author: Peter Chen ++ * ++ * This program is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 of ++ * the License as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * Static power sequence match table ++ * - Add compatible (the same with dts node) and related allocation function. ++ * - Update related binding doc. ++ */ ++static const struct of_device_id pwrseq_match_table_list[] = { ++ { .compatible = "usb424,2513", .data = &pwrseq_generic_alloc_instance}, ++ { .compatible = "usb424,2514", .data = &pwrseq_generic_alloc_instance}, ++ { /* sentinel */ } ++}; ++ ++static int pwrseq_get(struct device_node *np, struct pwrseq *p) ++{ ++ if (p && p->get) ++ return p->get(np, p); ++ ++ return -ENOTSUPP; ++} ++ ++static int pwrseq_on(struct pwrseq *p) ++{ ++ if (p && p->on) ++ return p->on(p); ++ ++ return -ENOTSUPP; ++} ++ ++static void pwrseq_off(struct pwrseq *p) ++{ ++ if (p && p->off) ++ p->off(p); ++} ++ ++static void pwrseq_put(struct pwrseq *p) ++{ ++ if (p && p->put) ++ p->put(p); ++} ++ ++/** ++ * of_pwrseq_on - Carry out power sequence on for device node ++ * ++ * @np: the device node would like to power on ++ * ++ * Carry out a single device power on. If multiple devices ++ * need to be handled, use of_pwrseq_on_list() instead. ++ * ++ * Return a pointer to the power sequence instance on success, or NULL if ++ * not exist, or an error code on failure. ++ */ ++struct pwrseq *of_pwrseq_on(struct device_node *np) ++{ ++ struct pwrseq *pwrseq; ++ int ret; ++ const struct of_device_id *of_id; ++ struct pwrseq *(*alloc_instance)(void); ++ ++ of_id = of_match_node(pwrseq_match_table_list, np); ++ if (!of_id) ++ return NULL; ++ ++ alloc_instance = of_id->data; ++ /* Allocate pwrseq instance */ ++ pwrseq = alloc_instance(); ++ if (IS_ERR(pwrseq)) ++ return pwrseq; ++ ++ ret = pwrseq_get(np, pwrseq); ++ if (ret) ++ goto pwr_put; ++ ++ ret = pwrseq_on(pwrseq); ++ if (ret) ++ goto pwr_put; ++ ++ return pwrseq; ++ ++pwr_put: ++ pwrseq_put(pwrseq); ++ return ERR_PTR(ret); ++} ++EXPORT_SYMBOL_GPL(of_pwrseq_on); ++ ++/** ++ * of_pwrseq_off - Carry out power sequence off for this pwrseq instance ++ * ++ * @pwrseq: the pwrseq instance which related device would like to be off ++ * ++ * This API is used to power off single device, it is the opposite ++ * operation for of_pwrseq_on. ++ */ ++void of_pwrseq_off(struct pwrseq *pwrseq) ++{ ++ pwrseq_off(pwrseq); ++ pwrseq_put(pwrseq); ++} ++EXPORT_SYMBOL_GPL(of_pwrseq_off); ++ ++/** ++ * of_pwrseq_on_list - Carry out power sequence on for list ++ * ++ * @np: the device node would like to power on ++ * @head: the list head for pwrseq list on this bus ++ * ++ * This API is used to power on multiple devices at single bus. ++ * If there are several devices on bus (eg, USB bus), uses this ++ * this API. Otherwise, use of_pwrseq_on instead. After the device ++ * is powered on successfully, it will be added to pwrseq list for ++ * this bus. The caller needs to use mutex_lock for concurrent. ++ * ++ * Return 0 on success, or -ENOENT if not exist, or an error value on failure. ++ */ ++int of_pwrseq_on_list(struct device_node *np, struct list_head *head) ++{ ++ struct pwrseq *pwrseq; ++ struct pwrseq_list_per_dev *pwrseq_list_node; ++ ++ pwrseq_list_node = kzalloc(sizeof(*pwrseq_list_node), GFP_KERNEL); ++ if (!pwrseq_list_node) ++ return -ENOMEM; ++ ++ pwrseq = of_pwrseq_on(np); ++ if (!pwrseq) ++ return -ENOENT; ++ ++ if (IS_ERR(pwrseq)) { ++ kfree(pwrseq_list_node); ++ return PTR_ERR(pwrseq); ++ } ++ ++ pwrseq_list_node->pwrseq = pwrseq; ++ list_add(&pwrseq_list_node->list, head); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(of_pwrseq_on_list); ++ ++/** ++ * of_pwrseq_off_list - Carry out power sequence off for the list ++ * ++ * @head: the list head for pwrseq instance list on this bus ++ * ++ * This API is used to power off all devices on this bus, it is ++ * the opposite operation for of_pwrseq_on_list. ++ * The caller needs to use mutex_lock for concurrent. ++ */ ++void of_pwrseq_off_list(struct list_head *head) ++{ ++ struct pwrseq *pwrseq; ++ struct pwrseq_list_per_dev *pwrseq_list_node, *tmp_node; ++ ++ list_for_each_entry_safe(pwrseq_list_node, tmp_node, head, list) { ++ pwrseq = pwrseq_list_node->pwrseq; ++ of_pwrseq_off(pwrseq); ++ list_del(&pwrseq_list_node->list); ++ kfree(pwrseq_list_node); ++ } ++} ++EXPORT_SYMBOL_GPL(of_pwrseq_off_list); ++ ++/** ++ * pwrseq_suspend - Carry out power sequence suspend for this pwrseq instance ++ * ++ * @pwrseq: the pwrseq instance ++ * ++ * This API is used to do suspend operation on pwrseq instance. ++ * ++ * Return 0 on success, or an error value otherwise. ++ */ ++int pwrseq_suspend(struct pwrseq *p) ++{ ++ int ret = 0; ++ ++ if (p && p->suspend) ++ ret = p->suspend(p); ++ else ++ return ret; ++ ++ if (!ret) ++ p->suspended = true; ++ else ++ pr_err("%s failed\n", __func__); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(pwrseq_suspend); ++ ++/** ++ * pwrseq_resume - Carry out power sequence resume for this pwrseq instance ++ * ++ * @pwrseq: the pwrseq instance ++ * ++ * This API is used to do resume operation on pwrseq instance. ++ * ++ * Return 0 on success, or an error value otherwise. ++ */ ++int pwrseq_resume(struct pwrseq *p) ++{ ++ int ret = 0; ++ ++ if (p && p->resume) ++ ret = p->resume(p); ++ else ++ return ret; ++ ++ if (!ret) ++ p->suspended = false; ++ else ++ pr_err("%s failed\n", __func__); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(pwrseq_resume); ++ ++/** ++ * pwrseq_suspend_list - Carry out power sequence suspend for list ++ * ++ * @head: the list head for pwrseq instance list on this bus ++ * ++ * This API is used to do suspend on all power sequence instances on this bus. ++ * The caller needs to use mutex_lock for concurrent. ++ */ ++int pwrseq_suspend_list(struct list_head *head) ++{ ++ struct pwrseq *pwrseq; ++ struct pwrseq_list_per_dev *pwrseq_list_node; ++ int ret = 0; ++ ++ list_for_each_entry(pwrseq_list_node, head, list) { ++ ret = pwrseq_suspend(pwrseq_list_node->pwrseq); ++ if (ret) ++ break; ++ } ++ ++ if (ret) { ++ list_for_each_entry(pwrseq_list_node, head, list) { ++ pwrseq = pwrseq_list_node->pwrseq; ++ if (pwrseq->suspended) ++ pwrseq_resume(pwrseq); ++ } ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(pwrseq_suspend_list); ++ ++/** ++ * pwrseq_resume_list - Carry out power sequence resume for the list ++ * ++ * @head: the list head for pwrseq instance list on this bus ++ * ++ * This API is used to do resume on all power sequence instances on this bus. ++ * The caller needs to use mutex_lock for concurrent. ++ */ ++int pwrseq_resume_list(struct list_head *head) ++{ ++ struct pwrseq_list_per_dev *pwrseq_list_node; ++ int ret = 0; ++ ++ list_for_each_entry(pwrseq_list_node, head, list) { ++ ret = pwrseq_resume(pwrseq_list_node->pwrseq); ++ if (ret) ++ break; ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(pwrseq_resume_list); +diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c +new file mode 100644 +index 000000000000..b7bbd6c5b47d +--- /dev/null ++++ b/drivers/power/pwrseq/pwrseq_generic.c +@@ -0,0 +1,210 @@ ++/* ++ * pwrseq_generic.c Generic power sequence handling ++ * ++ * Copyright (C) 2016 Freescale Semiconductor, Inc. ++ * Author: Peter Chen ++ * ++ * This program is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 of ++ * the License as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++struct pwrseq_generic { ++ struct pwrseq pwrseq; ++ struct gpio_desc *gpiod_reset; ++ struct clk *clks[PWRSEQ_MAX_CLKS]; ++ u32 duration_us; ++ bool suspended; ++}; ++ ++#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) ++ ++static int pwrseq_generic_suspend(struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ int clk; ++ ++ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) ++ clk_disable_unprepare(pwrseq_gen->clks[clk]); ++ ++ pwrseq_gen->suspended = true; ++ return 0; ++} ++ ++static int pwrseq_generic_resume(struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ int clk, ret = 0; ++ ++ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { ++ ret = clk_prepare_enable(pwrseq_gen->clks[clk]); ++ if (ret) { ++ pr_err("Can't enable clock, ret=%d\n", ret); ++ goto err_disable_clks; ++ } ++ } ++ ++ pwrseq_gen->suspended = false; ++ return ret; ++ ++err_disable_clks: ++ while (--clk >= 0) ++ clk_disable_unprepare(pwrseq_gen->clks[clk]); ++ ++ return ret; ++} ++ ++static void pwrseq_generic_put(struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ int clk; ++ ++ if (pwrseq_gen->gpiod_reset) ++ gpiod_put(pwrseq_gen->gpiod_reset); ++ ++ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) ++ clk_put(pwrseq_gen->clks[clk]); ++ ++ kfree(pwrseq_gen); ++} ++ ++static void pwrseq_generic_off(struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ int clk; ++ ++ if (pwrseq_gen->suspended) ++ return; ++ ++ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) ++ clk_disable_unprepare(pwrseq_gen->clks[clk]); ++} ++ ++static int pwrseq_generic_on(struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ int clk, ret = 0; ++ struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; ++ ++ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { ++ ret = clk_prepare_enable(pwrseq_gen->clks[clk]); ++ if (ret) { ++ pr_err("Can't enable clock, ret=%d\n", ret); ++ goto err_disable_clks; ++ } ++ } ++ ++ if (gpiod_reset) { ++ u32 duration_us = pwrseq_gen->duration_us; ++ ++ if (duration_us <= 10) ++ udelay(10); ++ else ++ usleep_range(duration_us, duration_us + 100); ++ gpiod_set_value(gpiod_reset, 0); ++ } ++ ++ return ret; ++ ++err_disable_clks: ++ while (--clk >= 0) ++ clk_disable_unprepare(pwrseq_gen->clks[clk]); ++ ++ return ret; ++} ++ ++static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) ++{ ++ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); ++ enum of_gpio_flags flags; ++ int reset_gpio, clk, ret = 0; ++ ++ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { ++ pwrseq_gen->clks[clk] = of_clk_get(np, clk); ++ if (IS_ERR(pwrseq_gen->clks[clk])) { ++ ret = PTR_ERR(pwrseq_gen->clks[clk]); ++ if (ret != -ENOENT) ++ goto err_put_clks; ++ pwrseq_gen->clks[clk] = NULL; ++ break; ++ } ++ } ++ ++ reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); ++ if (gpio_is_valid(reset_gpio)) { ++ unsigned long gpio_flags; ++ ++ if (flags & OF_GPIO_ACTIVE_LOW) ++ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; ++ else ++ gpio_flags = GPIOF_OUT_INIT_HIGH; ++ ++ ret = gpio_request_one(reset_gpio, gpio_flags, ++ "pwrseq-reset-gpios"); ++ if (ret) ++ goto err_put_clks; ++ ++ pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); ++ of_property_read_u32(np, "reset-duration-us", ++ &pwrseq_gen->duration_us); ++ } else if (reset_gpio == -ENOENT) { ++ ; /* no such gpio */ ++ } else { ++ ret = reset_gpio; ++ pr_err("Failed to get reset gpio on %s, err = %d\n", ++ np->full_name, reset_gpio); ++ goto err_put_clks; ++ } ++ ++ return 0; ++ ++err_put_clks: ++ while (--clk >= 0) ++ clk_put(pwrseq_gen->clks[clk]); ++ return ret; ++} ++ ++/** ++ * pwrseq_generic_alloc_instance - power sequence instance allocation ++ * ++ * This function is used to allocate one generic power sequence instance, ++ * it is called when the system boots up and after one power sequence ++ * instance is got successfully. ++ * ++ * Return zero on success or an error code otherwise. ++ */ ++struct pwrseq *pwrseq_generic_alloc_instance(void) ++{ ++ struct pwrseq_generic *pwrseq_gen; ++ ++ pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); ++ if (!pwrseq_gen) ++ return ERR_PTR(-ENOMEM); ++ ++ pwrseq_gen->pwrseq.get = pwrseq_generic_get; ++ pwrseq_gen->pwrseq.on = pwrseq_generic_on; ++ pwrseq_gen->pwrseq.off = pwrseq_generic_off; ++ pwrseq_gen->pwrseq.put = pwrseq_generic_put; ++ pwrseq_gen->pwrseq.suspend = pwrseq_generic_suspend; ++ pwrseq_gen->pwrseq.resume = pwrseq_generic_resume; ++ ++ return &pwrseq_gen->pwrseq; ++} +diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h +new file mode 100644 +index 000000000000..c5b278f5f2ae +--- /dev/null ++++ b/include/linux/power/pwrseq.h +@@ -0,0 +1,84 @@ ++#ifndef __LINUX_PWRSEQ_H ++#define __LINUX_PWRSEQ_H ++ ++#include ++ ++#define PWRSEQ_MAX_CLKS 3 ++ ++/** ++ * struct pwrseq - the power sequence structure ++ * @pwrseq_of_match_table: the OF device id table this pwrseq library supports ++ * @node: the list pointer to be added to pwrseq list ++ * @get: the API is used to get pwrseq instance from the device node ++ * @on: do power on for this pwrseq instance ++ * @off: do power off for this pwrseq instance ++ * @put: release the resources on this pwrseq instance ++ * @suspend: do suspend operation on this pwrseq instance ++ * @resume: do resume operation on this pwrseq instance ++ */ ++struct pwrseq { ++ const struct of_device_id *pwrseq_of_match_table; ++ struct list_head node; ++ int (*get)(struct device_node *np, struct pwrseq *p); ++ int (*on)(struct pwrseq *p); ++ void (*off)(struct pwrseq *p); ++ void (*put)(struct pwrseq *p); ++ int (*suspend)(struct pwrseq *p); ++ int (*resume)(struct pwrseq *p); ++ bool suspended; ++}; ++ ++/* used for power sequence instance list in one driver */ ++struct pwrseq_list_per_dev { ++ struct pwrseq *pwrseq; ++ struct list_head list; ++}; ++ ++#if IS_ENABLED(CONFIG_POWER_SEQUENCE) ++struct pwrseq *of_pwrseq_on(struct device_node *np); ++void of_pwrseq_off(struct pwrseq *pwrseq); ++int of_pwrseq_on_list(struct device_node *np, struct list_head *head); ++void of_pwrseq_off_list(struct list_head *head); ++int pwrseq_suspend(struct pwrseq *p); ++int pwrseq_resume(struct pwrseq *p); ++int pwrseq_suspend_list(struct list_head *head); ++int pwrseq_resume_list(struct list_head *head); ++#else ++static inline struct pwrseq *of_pwrseq_on(struct device_node *np) ++{ ++ return NULL; ++} ++static void of_pwrseq_off(struct pwrseq *pwrseq) {} ++static int of_pwrseq_on_list(struct device_node *np, struct list_head *head) ++{ ++ return 0; ++} ++static void of_pwrseq_off_list(struct list_head *head) {} ++static int pwrseq_suspend(struct pwrseq *p) ++{ ++ return 0; ++} ++static int pwrseq_resume(struct pwrseq *p) ++{ ++ return 0; ++} ++static int pwrseq_suspend_list(struct list_head *head) ++{ ++ return 0; ++} ++static int pwrseq_resume_list(struct list_head *head) ++{ ++ return 0; ++} ++#endif /* CONFIG_POWER_SEQUENCE */ ++ ++#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) ++extern struct pwrseq *pwrseq_generic_alloc_instance(void); ++#else ++static inline struct pwrseq *pwrseq_generic_alloc_instance(void) ++{ ++ return ERR_PTR(-ENOTSUPP); ++} ++#endif /* CONFIG_PWRSEQ_GENERIC */ ++ ++#endif /* __LINUX_PWRSEQ_H */ +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0011-usb-core-add-power-sequence-handling-for-USB-devices.patch b/kernels/linux-libre-lts-xtreme/0011-usb-core-add-power-sequence-handling-for-USB-devices.patch new file mode 100644 index 000000000..ac86e626d --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0011-usb-core-add-power-sequence-handling-for-USB-devices.patch @@ -0,0 +1,164 @@ +From 292560a839e5622bf2e071c1afe54bdb34209516 Mon Sep 17 00:00:00 2001 +From: Peter Chen +Date: Wed, 21 Jun 2017 14:42:05 +0800 +Subject: [PATCH 11/14] usb: core: add power sequence handling for USB devices + +Some hard-wired USB devices need to do power sequence to let the +device work normally, the typical power sequence like: enable USB +PHY clock, toggle reset pin, etc. But current Linux USB driver +lacks of such code to do it, it may cause some hard-wired USB devices +works abnormal or can't be recognized by controller at all. + +In this patch, it calls power sequence library APIs to finish +the power sequence events. It will do power on sequence at hub's +probe for all devices under this hub (includes root hub). +At hub_disconnect, it will do power off sequence which is at powered +on list. + +Signed-off-by: Peter Chen +Tested-by Joshua Clayton +Tested-by: Maciej S. Szmigiero +Reviewed-by: Vaibhav Hiremath +Acked-by: Alan Stern +--- + drivers/usb/Kconfig | 1 + + drivers/usb/core/hub.c | 49 +++++++++++++++++++++++++++++++++++++++++++++---- + drivers/usb/core/hub.h | 1 + + 3 files changed, 47 insertions(+), 4 deletions(-) + +diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig +index f699abab1787..67316ba6a84c 100644 +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -39,6 +39,7 @@ config USB + tristate "Support for Host-side USB" + depends on USB_ARCH_HAS_HCD + select USB_COMMON ++ select POWER_SEQUENCE + select NLS # for UTF-8 strings + ---help--- + Universal Serial Bus (USB) is a specification for a serial bus +diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c +index cf7bbcb9a63c..34f249f73757 100644 +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -28,6 +28,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -1634,6 +1635,7 @@ static void hub_disconnect(struct usb_interface *intf) + hub->error = 0; + hub_quiesce(hub, HUB_DISCONNECT); + ++ of_pwrseq_off_list(&hub->pwrseq_list); + mutex_lock(&usb_port_peer_mutex); + + /* Avoid races with recursively_mark_NOTATTACHED() */ +@@ -1680,11 +1682,41 @@ static bool hub_descriptor_is_sane(struct usb_host_interface *desc) + return true; + } + ++#ifdef CONFIG_OF ++static int hub_of_pwrseq_on(struct usb_hub *hub) ++{ ++ struct device *parent; ++ struct usb_device *hdev = hub->hdev; ++ struct device_node *np; ++ int ret; ++ ++ if (hdev->parent) ++ parent = &hdev->dev; ++ else ++ parent = bus_to_hcd(hdev->bus)->self.sysdev; ++ ++ for_each_child_of_node(parent->of_node, np) { ++ ret = of_pwrseq_on_list(np, &hub->pwrseq_list); ++ /* Maybe no power sequence library is chosen */ ++ if (ret && ret != -ENOENT) ++ return ret; ++ } ++ ++ return 0; ++} ++#else ++static int hub_of_pwrseq_on(struct usb_hub *hub) ++{ ++ return 0; ++} ++#endif ++ + static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) + { + struct usb_host_interface *desc; + struct usb_device *hdev; + struct usb_hub *hub; ++ int ret = -ENODEV; + + desc = intf->cur_altsetting; + hdev = interface_to_usbdev(intf); +@@ -1775,6 +1807,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) + INIT_DELAYED_WORK(&hub->leds, led_work); + INIT_DELAYED_WORK(&hub->init_work, NULL); + INIT_WORK(&hub->events, hub_event); ++ INIT_LIST_HEAD(&hub->pwrseq_list); + usb_get_intf(intf); + usb_get_dev(hdev); + +@@ -1788,11 +1821,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) + if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) + hub->quirk_check_port_auto_suspend = 1; + +- if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) +- return 0; ++ if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { ++ ret = hub_of_pwrseq_on(hub); ++ if (!ret) ++ return 0; ++ } + + hub_disconnect(intf); +- return -ENODEV; ++ return ret; + } + + static int +@@ -3606,14 +3642,19 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) + + /* stop hub_wq and related activity */ + hub_quiesce(hub, HUB_SUSPEND); +- return 0; ++ return pwrseq_suspend_list(&hub->pwrseq_list); + } + + static int hub_resume(struct usb_interface *intf) + { + struct usb_hub *hub = usb_get_intfdata(intf); ++ int ret; + + dev_dbg(&intf->dev, "%s\n", __func__); ++ ret = pwrseq_resume_list(&hub->pwrseq_list); ++ if (ret) ++ return ret; ++ + hub_activate(hub, HUB_RESUME); + return 0; + } +diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h +index 2a700ccc868c..3a0e6e6b22b0 100644 +--- a/drivers/usb/core/hub.h ++++ b/drivers/usb/core/hub.h +@@ -70,6 +70,7 @@ struct usb_hub { + struct delayed_work init_work; + struct work_struct events; + struct usb_port **ports; ++ struct list_head pwrseq_list; /* powered pwrseq node list */ + }; + + /** +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0012-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch b/kernels/linux-libre-lts-xtreme/0012-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch new file mode 100644 index 000000000..9631476bc --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0012-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch @@ -0,0 +1,49 @@ +From 059a623ab52a9fdaccd7a5d1b189478d5e7a96be Mon Sep 17 00:00:00 2001 +From: Joshua Clayton +Date: Wed, 21 Jun 2017 14:42:06 +0800 +Subject: [PATCH 12/14] ARM: dts: imx6qdl: Enable usb node children with + +Give usb nodes #address and #size attributes, so that a child node +representing a permanently connected device such as an onboard hub may +be addressed with a attribute + +Signed-off-by: Joshua Clayton +Signed-off-by: Peter Chen +--- + arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++ + 1 file changed, 6 insertions(+) + +diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi +index 1ce4eabf0590..3ff1ada590d1 100644 +--- a/arch/arm/boot/dts/imx6qdl.dtsi ++++ b/arch/arm/boot/dts/imx6qdl.dtsi +@@ -969,6 +969,8 @@ + + usbh1: usb@2184200 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; ++ #address-cells = <1>; ++ #size-cells = <0>; + reg = <0x02184200 0x200>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; +@@ -983,6 +985,8 @@ + + usbh2: usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; ++ #address-cells = <1>; ++ #size-cells = <0>; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; +@@ -996,6 +1000,8 @@ + + usbh3: usb@2184600 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; ++ #address-cells = <1>; ++ #size-cells = <0>; + reg = <0x02184600 0x200>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch b/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch new file mode 100644 index 000000000..8e8a085c9 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch @@ -0,0 +1,80 @@ +From 74bb546b27536c3f9bdd16080a915d98e8c1667f Mon Sep 17 00:00:00 2001 +From: Peter Chen +Date: Wed, 21 Jun 2017 14:42:07 +0800 +Subject: [PATCH 13/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB + property + +The current dts describes USB HUB's property at USB controller's +entry, it is improper. The USB HUB should be the child node +under USB controller, and power sequence properties are under +it. Besides, using gpio pinctrl setting for USB2415's reset pin. + +Signed-off-by: Peter Chen +Signed-off-by: Joshua Clayton +Tested-by: Maciej S. Szmigiero +--- + arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++++++++++++-------------- + 1 file changed, 12 insertions(+), 14 deletions(-) + +diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi +index c96c91d83678..a173de20ee73 100644 +--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi ++++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi +@@ -9,6 +9,8 @@ + * + */ + ++#include ++ + / { + aliases { + backlight = &backlight; +@@ -58,17 +60,6 @@ + #address-cells = <1>; + #size-cells = <0>; + +- reg_usb_h1_vbus: regulator@0 { +- compatible = "regulator-fixed"; +- reg = <0>; +- regulator-name = "usb_h1_vbus"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- enable-active-high; +- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ +- gpio = <&gpio7 12 0>; +- }; +- + reg_panel: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; +@@ -188,7 +179,7 @@ + + pinctrl_usbh: usbhgrp { + fsl,pins = < +- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; +@@ -259,9 +250,16 @@ + &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; +- vbus-supply = <®_usb_h1_vbus>; +- clocks = <&clks IMX6QDL_CLK_CKO>; + status = "okay"; ++ ++ usb2415: hub@1 { ++ compatible = "usb424,2514"; ++ reg = <1>; ++ ++ clocks = <&clks IMX6QDL_CLK_CKO>; ++ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; ++ reset-duration-us = <3000>; ++ }; + }; + + &usdhc3 { +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/0014-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch b/kernels/linux-libre-lts-xtreme/0014-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch new file mode 100644 index 000000000..dbc7fce01 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/0014-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch @@ -0,0 +1,74 @@ +From 47a3451ea61bc01753f71acfc011738f8681dc53 Mon Sep 17 00:00:00 2001 +From: Joshua Clayton +Date: Wed, 21 Jun 2017 14:42:08 +0800 +Subject: [PATCH 14/14] ARM: dts: imx6q-evi: Fix onboard hub reset line + +Previously the onboard hub was made to work by treating its +reset gpio as a regulator enable. +Get rid of that kludge now that pwseq has added reset gpio support +Move pin muxing the hub reset pin into the usbh1 group + +Signed-off-by: Joshua Clayton +Signed-off-by: Peter Chen +--- + arch/arm/boot/dts/imx6q-evi.dts | 25 +++++++------------------ + 1 file changed, 7 insertions(+), 18 deletions(-) + +diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts +index e0aea782c666..6f3afffc8faa 100644 +--- a/arch/arm/boot/dts/imx6q-evi.dts ++++ b/arch/arm/boot/dts/imx6q-evi.dts +@@ -54,18 +54,6 @@ + reg = <0x10000000 0x40000000>; + }; + +- reg_usbh1_vbus: regulator-usbhubreset { +- compatible = "regulator-fixed"; +- regulator-name = "usbh1_vbus"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- enable-active-high; +- startup-delay-us = <2>; +- pinctrl-names = "default"; +- pinctrl-0 = <&pinctrl_usbh1_hubreset>; +- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; +- }; +- + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; +@@ -213,12 +201,18 @@ + }; + + &usbh1 { +- vbus-supply = <®_usbh1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + disable-over-current; + status = "okay"; ++ ++ usb2415host: hub@1 { ++ compatible = "usb424,2513"; ++ reg = <1>; ++ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; ++ reset-duration-us = <3000>; ++ }; + }; + + &usbotg { +@@ -481,11 +475,6 @@ + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 + /* usbh1_b OC */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 +- >; +- }; +- +- pinctrl_usbh1_hubreset: usbh1hubresetgrp { +- fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; +-- +2.16.1 + diff --git a/kernels/linux-libre-lts-xtreme/60-linux.hook b/kernels/linux-libre-lts-xtreme/60-linux.hook new file mode 100644 index 000000000..b33873c85 --- /dev/null +++ b/kernels/linux-libre-lts-xtreme/60-linux.hook @@ -0,0 +1,12 @@ +[Trigger] +Type = File +Operation = Install +Operation = Upgrade +Operation = Remove +Target = usr/lib/modules/%KERNVER%/* +Target = usr/lib/modules/%EXTRAMODULES%/* + +[Action] +Description = Updating %PKGBASE% module dependencies... +When = PostTransaction +Exec = /usr/bin/depmod %KERNVER% diff --git a/kernels/linux-libre-lts-xtreme/90-linux.hook b/kernels/linux-libre-lts-xtreme/90-linux.hook index 985115199..be0d88653 100644 --- a/kernels/linux-libre-lts-xtreme/90-linux.hook +++ b/kernels/linux-libre-lts-xtreme/90-linux.hook @@ -6,6 +6,6 @@ Target = boot/vmlinuz-%PKGBASE% Target = usr/lib/initcpio/* [Action] -Description = Updating %PKGBASE% initcpios +Description = Updating %PKGBASE% initcpios... When = PostTransaction Exec = /usr/bin/mkinitcpio -p %PKGBASE% diff --git a/kernels/linux-libre-lts-xtreme/PKGBUILD b/kernels/linux-libre-lts-xtreme/PKGBUILD index 2e0833eff..f173fbb58 100644 --- a/kernels/linux-libre-lts-xtreme/PKGBUILD +++ b/kernels/linux-libre-lts-xtreme/PKGBUILD @@ -1,7 +1,7 @@ # Maintainer: David P. # Contributor: André Silva # Contributor: Márcio Silva -# Contributor: Nicolás Reynolds +# Contributor: fauno # Contributor: Sorin-Mihai Vârgolici # Contributor: Michał Masłowski # Contributor: Luke Shumaker @@ -11,7 +11,7 @@ pkgbase=linux-libre-lts-xtreme _pkgbasever=4.9-gnu -_pkgver=4.9.75-gnu +_pkgver=4.9.92-gnu _knockpatchver=4.9_1 _replacesarchkernel=('linux%') # '%' gets replaced with _kernelname @@ -23,41 +23,47 @@ _archpkgver=${_pkgver%-*} pkgver=${_pkgver//-/_} pkgrel=1 rcnrel=armv7-x6 -arch=('i686' 'x86_64' 'armv7h') +arch=('x86_64' 'i686' 'armv7h') url="https://wiki.parabola.nu/Xtreme" license=('GPL2') -makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc' 'libelf') +makedepends=('xmlto' 'kmod' 'inetutils' 'bc' 'libelf') makedepends_armv7h=('git') options=('!strip') -source=("https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/linux-libre-${_pkgbasever}.tar.xz"{,.sign} - "https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasever}-${_pkgver}.xz"{,.sign} - #"https://gnunet.org/sites/default/files/tcp_stealth_${_knockpatchver}.diff" - #"tcp_stealth_${_knockpatchver}.diff.sig::https://gnunet.org/sites/default/files/tcp_stealth_${_knockpatchver%_1}.diff_1.sig" - "https://repo.parabola.nu/other/knock/patches/linux-libre/tcp_stealth_${_knockpatchver}.diff"{,.sig} - "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_clut224.ppm"{,.sig} - "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_mono.pbm"{,.sig} - "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_vga16.ppm"{,.sig} - # the main kernel config files - 'config.i686' 'config.x86_64' 'config.armv7h' - # pacman hook for initramfs regeneration - '90-linux.hook' - # standard config files for mkinitcpio ramdisk - 'linux.preset' - 'change-default-console-loglevel.patch' - '0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch' - '0002-fix-Atmel-maXTouch-touchscreen-support.patch' - # armv7h patches - "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch"{,.sig} - '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch' - '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch' - '0003-SMILE-Plug-device-tree-file.patch' - '0004-fix-mvsdio-eMMC-timing.patch' - '0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch' - '0006-set-default-cubietruck-led-triggers.patch' - '0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch') +source=( + "https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/linux-libre-${_pkgbasever}.tar.xz"{,.sign} + "https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasever}-${_pkgver}.xz"{,.sign} + "https://repo.parabola.nu/other/knock/patches/linux-libre/tcp_stealth_${_knockpatchver}.diff"{,.sig} + "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_clut224.ppm"{,.sig} + "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_mono.pbm"{,.sig} + "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_vga16.ppm"{,.sig} + # the main kernel config files + 'config.i686' 'config.x86_64' 'config.armv7h' + # pacman hooks for depmod and initramfs regeneration + '60-linux.hook' '90-linux.hook' + # standard config files for mkinitcpio ramdisk + 'linux.preset' + # armv7h patches + "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch"{,.sig} + '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch' + '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch' + '0003-SMILE-Plug-device-tree-file.patch' + '0004-fix-mvsdio-eMMC-timing.patch' + '0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch' + '0006-set-default-cubietruck-led-triggers.patch' + '0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch' + '0008-disable-USB3-port-on-ODROID-XU.patch' + '0009-ARM-dove-enable-ethernet-on-D3Plug.patch' + # other patches + '0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch' + '0002-fix-Atmel-maXTouch-touchscreen-support.patch' +) +validpgpkeys=( + '474402C8C582DAFBE389C427BCB7CF877E7D47A7' # Alexandre Oliva + '6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78' # David P. +) sha512sums=('885eb0a7fab45dc749acb4329b4330a43b704df2d5f2f5aac1811503c132ca53ca49452f9b1cc80b0826c7a4962dbe4937aecb697aa823b2543ba2cabc704816' 'SKIP' - 'e3a18af2204b7f73985704ed78f21f05412868e320d9ede6c58229d5b14ff990c73cfb6c45f3311a19b63078c1838faad7bf3164da7351295421adb758b43261' + '1dfe3c74d450c0b1ecd73e84d34b71297bcaf70eb9a495dc8a501e809e35e4c962de4cffdf45c73a73fd3612a7a347e0ebe301d7e25ceb3649db99ae0fc462b3' 'SKIP' 'a00e9fc0b930021242b231dfdd15160eaefbfad4aaa0ba0426bb9a25dd14acc1825cbb1bc9c680a6d43baca797591dc219e232862f566457752ff378e03600a3' 'SKIP' @@ -67,28 +73,25 @@ sha512sums=('885eb0a7fab45dc749acb4329b4330a43b704df2d5f2f5aac1811503c132ca53ca4 'SKIP' '7a3716bfe3b9f546da309c7492f3e08f8f506813afeb1c737a474c83313d5c313cf4582b65215c2cfce3b74d9d1021c96e8badafe8f6e5b01fe28d2b5c61ae78' 'SKIP' - '33da572427ccbd809bc06adb99483a0b56e7e420c651165fb9fe9f491b1891d695b952173c31dedfe06657e2bf81ea61591f08e2b6067baf132f8abc2392c82b' - '37e106b6f5af18047d1a1f0e045e3379d7b105878e15c1a5a6e18d93860af9793423a2ea8c2054d14cd7f87b8566060aac90642ccadc62bf6214e61c0d9e7da9' - '43cb3b8eddb3844db2adb72044dbc0520f1b8e31e1e34586834b7ec499a501d3404e68291f8296aa78657544848e725c12e9b722941e2d52625fce5e99cf4a47' - 'd6faa67f3ef40052152254ae43fee031365d0b1524aa0718b659eb75afc21a3f79ea8d62d66ea311a800109bed545bc8f79e8752319cd378eef2cbd3a09aba22' + 'aaf88ac19f892dc0ab3e19582309c851baab296c7f3edfa47d18460fa12c25b9c08a08143b16d6780b7e5ca57d413c6890df6d3cc0926072dd6d1a476891122b' + 'a7ed96ca23a8c0d434514b8d379d17bad8f6db915f92cd982f3abbe70f0035ad190c0b4d1d29157e702ccc06789b1a1fe08e0d8c1cec90d943bc1f5007a9d4e6' + '469191c3ff5a458c8d708b1d791bcf0fc7d97446943354717675bed79f4a61f51a51b09f991c5bc71a7bbf3d5333879276a55f9ca8edb6caa9f12aae8ea73d1f' + '7ad5be75ee422dda3b80edd2eb614d8a9181e2c8228cd68b3881e2fb95953bf2dea6cbe7900ce1013c9de89b2802574b7b24869fc5d7a95d3cc3112c4d27063a' + '4a8b324aee4cccf3a512ad04ce1a272d14e5b05c8de90feb82075f55ea3845948d817e1b0c6f298f5816834ddd3e5ce0a0e2619866289f3c1ab8fd2f35f04f44' '2dc6b0ba8f7dbf19d2446c5c5f1823587de89f4e28e9595937dd51a87755099656f2acec50e3e2546ea633ad1bfd1c722e0c2b91eef1d609103d8abdc0a7cbaf' - 'd9d28e02e964704ea96645a5107f8b65cae5f4fb4f537e224e5e3d087fd296cb770c29ac76e0ce95d173bc420ea87fb8f187d616672a60a0cae618b0ef15b8c8' - '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af' - 'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168' - 'd5548e5afac67bec1d7bf754179ccad30beb453b3a5562b8c1ce34fc20b4b421528f2c90381803c8fdb8dc7757d801ee54a03f2631bab98e22f66c7d64c82b1e' + '5ff744265ad80f6d2bd310b247de86e98854db6d9134cd3a656ef4e90db4cf59c5dadc554e96a8ef8b7677447a0c9623b360cc34a6786078be09ab536f48d3f4' 'SKIP' - '4fa96f6c40b34c2448be34e794cebbcbe3354c8376c5a305aae9b931bf52a818522ccc91e7c4683481e4d2ba411e928cf5f6c1481666b596993d6ae4ee28eb08' - '6764e186cd5ba27817bf341cc7350309e14772c9ace5f34b05f10f42785158dc53509c58ae5961d75aae1d814190e8040c7bb2d0c6beee473725d6cc8d32c44e' - 'cd7548cd7978eff2449a58bbdca40b89a573d8d9faed6f6cf7b4a6d8b45a432d84a2ef8a041524ebb6d89cfc6e2ac1eab88c6e398c0c9b31d31b7f0e8bbee3ac' - 'ab649ebff6148df15eb6325acd2ddd0c99cc087e4722326bca8d13e70dfa60dbc40da3cb640c1ef2b67ee98b33fda79ee175519e7cc40c2d22def3c347519fd9' - '95a5a508187ebd551a2931cf8b9848b34b340d8cf725861893c1db4e10e08d8b876a3024398db07be2d76b4c88acb719b60e3d3d52f7569f52d8a799944db742' - '527fcd12a37bad8113e0fc389e10f665c16a894fa1d2ae3ed0809fe21d18164fd7590b34570f5999d8c1c569f212908db53ef9d8b3783e94eeba75666c5547d9' - 'd34d69b936266da6c4d80a042f7613d368d97539457f8428727942fc196f32c932dc8dc97c522aa4793711e73b15b963dad9d18d85f930532d9491b4a2b37b96') -validpgpkeys=( - '474402C8C582DAFBE389C427BCB7CF877E7D47A7' # Alexandre Oliva - '6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78' # David P. - '76298B5BB60EDAD21B362E667585399992435BA4' # Mathias Krause -) + 'ba44aa1252aa1b172e0bc8bbbff864ff60cad6739b2aed2f6a2402848aa65cdb8a8ca6bb9341569b089d60dfd83c3bdd744b5810061ac76b19f0d337afe4cc8d' + '738bc2874351d9e1b94319e6caf615b49753155c99dc9318a1ce9eced50f87627a7331762951f55e2bea8abdb97b80a617a08f3f0bc735e56ff831a8bbb19816' + 'f45d8d417eb3f4b6e02e337480bd99a8ebb4b9ac004c53a5432255e5841578fb64530663b6eacb3c8f40aaade8e1dc1e584aa1cf4b560103119e4b32e19b66c3' + '25ee5d9859d3df2d054fd6d53fe6b8931d6ac9f85533c54f3dd926fce917c81bd96cb3858189a20cf28a32b43efd1566cb5513f7db18a0bb8ead1a4e8a7be6fc' + 'a1aa8272760da0c8d2772cc8a57d8600f08db176206afd2a155055d2969bf0295f342a156841964a07de53fbf0356385b604ad75e5556569872dfad1863b2c27' + 'b58efc374344d10290371f3dfe8a124f855015d3ce169ccf538e6c1476092abf7ac689f0f10fb6a191fa19545b49ce13957ada066b37415f37dd5989ff93db37' + 'd2326e2e3ef6f2f5e911e6ad2fc3ac33b6f53fc5bb03e61d0e8371e6c7199028b226356926472ba676ca68a6cc57d33856c662615ed5b52566570670d0f96c89' + 'bc47549f2a79a79659d4d53f739e091c1e8f54cef8c1776be2034675cbb43f584a128607b1d4dd6a9f465706bb1470c6cb4277877dd3218e7280f503babf8300' + 'd90f3a3b74d65b84c4c2c229d10d2bb854e39e3429ba1469f8bb286819d559c68e00302de2be5043cf274b39a58686dc822c60afe1c553c4c967ef168d98af05' + '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af' + 'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168') _kernelname=${pkgbase#linux-libre} _replacesarchkernel=("${_replacesarchkernel[@]/\%/${_kernelname}}") @@ -101,45 +104,44 @@ case "${CARCH}" in esac prepare() { - cd "${srcdir}/${_srcname}" + cd ${_srcname} # add upstream patch if [ "${_pkgbasever}" != "${_pkgver}" ]; then - patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" + patch -p1 -i ../patch-${_pkgbasever}-${_pkgver} fi - - # add Knock patch - patch -p1 -i "${srcdir}/tcp_stealth_${_knockpatchver}.diff" + # add Knock patch + patch -p1 -i ../tcp_stealth_${_knockpatchver}.diff + if [ "${CARCH}" = "armv7h" ]; then - # RCN patch (CM3 firmware deblobbed, AUFS and RT removed) - # Note: For stability reasons, AUFS and RT have been removed in the RCN patch. - # We are supporting AUFS in linux-libre-pck through PCK patch and RT through its official - # patch in linux-libre-rt. See https://wiki.parabola.nu/PCK for further details about PCK. - git apply -v "${srcdir}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch" + # RCN patch (CM3 firmware deblobbed and AUFS removed) + # Note: For stability reasons, AUFS has been removed in the RCN patch. + # We are supporting AUFS in linux-libre-pck through PCK patch. + # See https://wiki.parabola.nu/PCK for further details. + git apply -v ../rcn-libre-${_pkgver%-*}-${rcnrel}.patch # ALARM patches - patch -p1 -i "${srcdir}/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch" - patch -p1 -i "${srcdir}/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch" - patch -p1 -i "${srcdir}/0003-SMILE-Plug-device-tree-file.patch" - patch -p1 -i "${srcdir}/0004-fix-mvsdio-eMMC-timing.patch" - patch -p1 -i "${srcdir}/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch" - patch -p1 -i "${srcdir}/0006-set-default-cubietruck-led-triggers.patch" - patch -p1 -i "${srcdir}/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch" + patch -p1 -i ../0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch + patch -p1 -i ../0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch + patch -p1 -i ../0003-SMILE-Plug-device-tree-file.patch + patch -p1 -i ../0004-fix-mvsdio-eMMC-timing.patch + patch -p1 -i ../0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch + patch -p1 -i ../0006-set-default-cubietruck-led-triggers.patch + patch -p1 -i ../0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch + patch -p1 -i ../0008-disable-USB3-port-on-ODROID-XU.patch + patch -p1 -i ../0009-ARM-dove-enable-ethernet-on-D3Plug.patch fi - + # add freedo as boot logo install -m644 -t drivers/video/logo \ - "${srcdir}/logo_linux_"{clut224.ppm,vga16.ppm,mono.pbm} + ../logo_linux_{clut224.ppm,vga16.ppm,mono.pbm} + + # security patches # add latest fixes from stable queue, if needed # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git - - # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param) - # remove this when a Kconfig knob is made available by upstream - # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227) - patch -p1 -i "${srcdir}/change-default-console-loglevel.patch" - + # maintain the TTY over USB disconnects # http://www.coreboot.org/EHCI_Gadget_Debug patch -p1 -i "${srcdir}/0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch" @@ -149,7 +151,12 @@ prepare() { # http://www.fsfla.org/pipermail/linux-libre/2015-November/003202.html patch -p1 -i "${srcdir}/0002-fix-Atmel-maXTouch-touchscreen-support.patch" - cat "${srcdir}/config.${CARCH}" > ./.config + cp -Tf ../config.$CARCH .config + + if [ "${_kernelname}" != "" ]; then + sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config + sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config + fi # append pkgrel to extraversion sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile @@ -173,7 +180,7 @@ prepare() { } build() { - cd "${srcdir}/${_srcname}" + cd ${_srcname} if [ "${CARCH}" = "armv7h" ]; then make ${MAKEFLAGS} LOCALVERSION= zImage modules dtbs @@ -183,27 +190,27 @@ build() { } _package() { - pkgdesc="The ${pkgbase^} kernel and modules - stable longtime supported kernel package suitable for servers with handful of awesome security features [AppArmor, SMACK, TOMOYO, SELinux, YAMA, Knock]" +pkgdesc="The ${pkgbase^} kernel and modules - stable longtime supported kernel package suitable for servers with handful of awesome security features [AppArmor, SMACK, TOMOYO, SELinux, YAMA, Knock]" [ "${pkgbase}" = "linux-libre" ] && groups=('base' 'base-openrc') depends=('coreutils' 'linux-libre-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country' 'apparmor: to configure and enable mandatory access control for programs' 'openssh-knock: to use SSH with TCP Stealth support') - provides=("${_replacesarchkernel[@]/%/=${_archpkgver}}" "LINUX-ABI_VERSION=${_archpkgver}") + provides=("${_replacesarchkernel[@]/%/=${_archpkgver}}") conflicts=("${_replacesarchkernel[@]}" "${_replacesoldkernels[@]}" "${_replacesoldmodules[@]}") replaces=("${_replacesarchkernel[@]}" "${_replacesoldkernels[@]}" "${_replacesoldmodules[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") install=linux.install - cd "${srcdir}/${_srcname}" + cd ${_srcname} # get kernel version _kernver="$(make LOCALVERSION= kernelrelease)" _basekernel=${_kernver%%-*} _basekernel=${_basekernel%.*} - mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot} - make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install + mkdir -p "${pkgdir}"/{boot,usr/lib/modules} + make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}/usr" modules_install if [ "${CARCH}" = "armv7h" ]; then make LOCALVERSION= INSTALL_DTBS_PATH="${pkgdir}/boot/dtbs/${pkgbase}" dtbs_install cp arch/$KARCH/boot/zImage "${pkgdir}/boot/vmlinuz-${pkgbase}" @@ -211,46 +218,52 @@ _package() { cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}" fi - # set correct depmod command for install - sed -e "s|%PKGBASE%|${pkgbase}|g;s|%KERNVER%|${_kernver}|g" \ - "${startdir}/${install}" > "${startdir}/${install}.pkg" - true && install=${install}.pkg - - # install mkinitcpio preset file for kernel - if [ "${CARCH}" = "armv7h" ]; then - sed "s|/boot/vmlinuz-%PKGBASE%|${_kernver}|g - s|%PKGBASE%|${pkgbase}|g" "${srcdir}/linux.preset" | - install -D -m644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" - elif [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then - sed "s|%PKGBASE%|${pkgbase}|g" "${srcdir}/linux.preset" | - install -D -m644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" - fi + # make room for external modules + local _extramodules="extramodules-${_basekernel}${_kernelname:--lts}" + ln -s "../${_extramodules}" "${pkgdir}/usr/lib/modules/${_kernver}/extramodules" - # install pacman hook for initramfs regeneration - sed "s|%PKGBASE%|${pkgbase}|g" "${srcdir}/99-linux.hook" | - install -D -m644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/99-${pkgbase}.hook" + # add real version for building modules and running depmod from hook + echo "${_kernver}" | + install -Dm644 /dev/stdin "${pkgdir}/usr/lib/modules/${_extramodules}/version" # remove build and source links - rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build} - # remove the firmware - rm -rf "${pkgdir}/lib/firmware" - # make room for external modules - ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" - # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" + rm "${pkgdir}"/usr/lib/modules/${_kernver}/{source,build} - # Now we call depmod... - depmod -b "${pkgdir}" -F System.map "${_kernver}" + # now we call depmod... + depmod -b "${pkgdir}/usr" -F System.map "${_kernver}" - # move module tree /lib -> /usr/lib - mkdir -p "${pkgdir}/usr" - mv "${pkgdir}/lib" "${pkgdir}/usr/" + # add vmlinux + install -Dt "${pkgdir}/usr/lib/modules/${_kernver}/build" -m644 vmlinux - if [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then - # add vmlinux - install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux" + # sed expression for following substitutions + if [ "${CARCH}" = "armv7h" ]; then + local _subst=" + s|/boot/vmlinuz-%PKGBASE%|${_kernver}|g + s|%PKGBASE%|${pkgbase}|g + s|%KERNVER%|${_kernver}|g + s|%EXTRAMODULES%|${_extramodules}|g + " + elif [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then + local _subst=" + s|%PKGBASE%|${pkgbase}|g + s|%KERNVER%|${_kernver}|g + s|%EXTRAMODULES%|${_extramodules}|g + " fi + + # hack to allow specifying an initially nonexisting install file + sed "${_subst}" "${startdir}/${install}" > "${startdir}/${install}.pkg" + true && install=${install}.pkg + + # install mkinitcpio preset file + sed "${_subst}" ../linux.preset | + install -Dm644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + + # install pacman hooks + sed "${_subst}" ../60-linux.hook | + install -Dm644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/60-${pkgbase}.hook" + sed "${_subst}" ../90-linux.hook | + install -Dm644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/90-${pkgbase}.hook" } _package-headers() { @@ -259,139 +272,93 @@ _package-headers() { conflicts=("${_replacesarchkernel[@]/%/-headers}" "${_replacesoldkernels[@]/%/-headers}") replaces=("${_replacesarchkernel[@]/%/-headers}" "${_replacesoldkernels[@]/%/-headers}") - install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" + cd ${_srcname} + local _builddir="${pkgdir}/usr/lib/modules/${_kernver}/build" - cd "${srcdir}/${_srcname}" - install -D -m644 Makefile \ - "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile" - install -D -m644 kernel/Makefile \ - "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile" - install -D -m644 .config \ - "${pkgdir}/usr/lib/modules/${_kernver}/build/.config" + install -Dt "${_builddir}" -m644 Makefile .config Module.symvers + install -Dt "${_builddir}/kernel" -m644 kernel/Makefile - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include" + mkdir "${_builddir}/.tmp_versions" - for i in acpi asm-generic config crypto drm generated keys linux math-emu \ - media net pcmcia scsi soc sound trace uapi video xen; do - cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/" - done + cp -t "${_builddir}" -a include scripts - # copy arch includes for external modules - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}" - cp -a arch/${KARCH}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/" - if [ "${CARCH}" = "armv7h" ]; then - for i in dove exynos omap2; do - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}" - cp -a arch/${KARCH}/mach-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}/" - done - for i in omap orion samsung versatile; do - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}" - cp -a arch/${KARCH}/plat-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}/" - done - fi - - # copy files necessary for later builds - cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build" - cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build" - - # fix permissions on scripts dir - chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions" - - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel" - - cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/" - - if [ "${CARCH}" = "i686" ]; then - cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/" + install -Dt "${_builddir}/arch/${KARCH}" -m644 arch/${KARCH}/Makefile + install -Dt "${_builddir}/arch/${KARCH}/kernel" -m644 arch/${KARCH}/kernel/asm-offsets.s + + if [[ ${CARCH} = i686 ]]; then + install -t "${_builddir}/arch/${KARCH}" -m644 arch/${KARCH}/Makefile_32.cpu fi - cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/" - - # add docbook makefile - install -D -m644 Documentation/DocBook/Makefile \ - "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile" - - # add dm headers - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md" - cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md" + cp -t "${_builddir}/arch/${KARCH}" -a arch/${KARCH}/include - # add inotify.h - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux" - cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/" + install -Dt "${_builddir}/drivers/md" -m644 drivers/md/*.h + install -Dt "${_builddir}/net/mac80211" -m644 net/mac80211/*.h - # add wireless headers - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/" - cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/" - - # add dvb headers for external modules - # in reference to: # http://bugs.archlinux.org/task/9912 - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core" - cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/" - # and... - # http://bugs.archlinux.org/task/11194 - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/" - cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/" - - # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new - # in reference to: + install -Dt "${_builddir}/drivers/media/dvb-core" -m644 drivers/media/dvb-core/*.h + # http://bugs.archlinux.org/task/13146 - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/" - cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/" - cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/" + install -Dt "${_builddir}/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h - # add dvb headers - # in reference to: # http://bugs.archlinux.org/task/20402 - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb" - cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends" - cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners" - cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/" + install -Dt "${_builddir}/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h + install -Dt "${_builddir}/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h + install -Dt "${_builddir}/drivers/media/tuners" -m644 drivers/media/tuners/*.h # add xfs and shmem for aufs building - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm" - # removed in 3.17-gnu series - # cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h" + mkdir -p "${_builddir}"/{fs/xfs,mm} # copy in Kconfig files - for i in $(find . -name "Kconfig*"); do - mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'` - cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}" - done + find . -name Kconfig\* -exec install -Dm644 {} "${_builddir}/{}" \; # add objtool for external module building and enabled VALIDATION_STACK option - if [ -f tools/objtool/objtool ]; then - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/tools/objtool" - cp -a tools/objtool/objtool ${pkgdir}/usr/lib/modules/${_kernver}/build/tools/objtool/ + if [[ -e tools/objtool/objtool ]]; then + install -Dt "${_builddir}/tools/objtool" tools/objtool/objtool fi + + # remove unneeded architectures + local _arch + for _arch in "${_builddir}"/arch/*/; do + [[ ${_arch} == */${KARCH}/ ]] && continue + rm -r "${_arch}" + done - chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build" - find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \; + # remove files already in linux-docs package + rm -r "${_builddir}/Documentation" + + # parabola changes + # + # since we don't want to diverge too much from arch's pkgbuild, we'll + # start marking our changes as such + if [ "${CARCH}" = "armv7h" ]; then + for i in dove exynos omap2; do + mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}" + cp -a arch/${KARCH}/mach-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}/" + done + for i in omap orion samsung versatile; do + mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}" + cp -a arch/${KARCH}/plat-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}/" + done + fi + # end of parabola changes - # strip scripts directory - find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do - case "$(file -bi "${binary}")" in - *application/x-sharedlib*) # Libraries (.so) - /usr/bin/strip ${STRIP_SHARED} "${binary}";; - *application/x-archive*) # Libraries (.a) - /usr/bin/strip ${STRIP_STATIC} "${binary}";; - *application/x-executable*) # Binaries - /usr/bin/strip ${STRIP_BINARIES} "${binary}";; - esac - done + # remove now broken symlinks + find -L "${_builddir}" -type l -printf 'Removing %P\n' -delete - # remove unneeded architectures - find "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch -mindepth 1 -maxdepth 1 -type d -not -name "$KARCH" -exec rm -rf {} + + # Fix permissions + chmod -R u=rwX,go=rX "${_builddir}" - # remove files already in docs package - rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.recursion-issue-01" - rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.recursion-issue-02" - rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.select-break" + # strip scripts directory + local _binary _strip + while read -rd '' _binary; do + case "$(file -bi "${_binary}")" in + *application/x-sharedlib*) _strip="${STRIP_SHARED}" ;; # Libraries (.so) + *application/x-archive*) _strip="${STRIP_STATIC}" ;; # Libraries (.a) + *application/x-executable*) _strip="${STRIP_BINARIES}" ;; # Binaries + *) continue ;; + esac + /usr/bin/strip ${_strip} "${_binary}" + done < <(find "${_builddir}/scripts" -type f -perm -u+w -print0 2>/dev/null) } _package-docs() { @@ -400,15 +367,14 @@ _package-docs() { conflicts=("${_replacesarchkernel[@]/%/-docs}" "${_replacesoldkernels[@]/%/-docs}") replaces=("${_replacesarchkernel[@]/%/-docs}" "${_replacesoldkernels[@]/%/-docs}") - cd "${srcdir}/${_srcname}" + cd ${_srcname} + local _builddir="${pkgdir}/usr/lib/modules/${_kernver}/build" - mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build" - cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build" - find "${pkgdir}" -type f -exec chmod 444 {} \; - find "${pkgdir}" -type d -exec chmod 755 {} \; + mkdir -p "${_builddir}" + cp -t "${_builddir}" -a Documentation - # remove a file already in kernel package - rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile" + # Fix permissions + chmod -R u=rwX,go=rX "${_builddir}" } pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs") @@ -418,5 +384,3 @@ for _p in ${pkgname[@]}; do _package${_p#${pkgbase}} }" done - -# vim:set ts=8 sts=2 sw=2 et: diff --git a/kernels/linux-libre-lts-xtreme/change-default-console-loglevel.patch b/kernels/linux-libre-lts-xtreme/change-default-console-loglevel.patch deleted file mode 100644 index 11da2a9d8..000000000 --- a/kernels/linux-libre-lts-xtreme/change-default-console-loglevel.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-3.16/include/linux/printk.h.old 2014-08-04 18:48:30.686043266 +0200 -+++ linux-3.16/include/linux/printk.h 2014-08-04 18:48:47.706218528 +0200 -@@ -37,7 +37,7 @@ - #define CONSOLE_LOGLEVEL_SILENT 0 /* Mum's the word */ - #define CONSOLE_LOGLEVEL_MIN 1 /* Minimum loglevel we let people use */ - #define CONSOLE_LOGLEVEL_QUIET 4 /* Shhh ..., when booted with "quiet" */ --#define CONSOLE_LOGLEVEL_DEFAULT 7 /* anything MORE serious than KERN_DEBUG */ -+#define CONSOLE_LOGLEVEL_DEFAULT 4 /* anything MORE serious than KERN_DEBUG */ - #define CONSOLE_LOGLEVEL_DEBUG 10 /* issue debug messages */ - #define CONSOLE_LOGLEVEL_MOTORMOUTH 15 /* You can't shut this one up */ - diff --git a/kernels/linux-libre-lts-xtreme/config.armv7h b/kernels/linux-libre-lts-xtreme/config.armv7h index 5c07906e5..12e69bf70 100644 --- a/kernels/linux-libre-lts-xtreme/config.armv7h +++ b/kernels/linux-libre-lts-xtreme/config.armv7h @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.9.74-gnu-1-lts-xtreme Kernel Configuration +# Linux/arm 4.9.92-gnu-1-lts-xtreme Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -57,8 +57,11 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y CONFIG_USELIB=y -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y # # IRQ subsystem @@ -3660,7 +3663,6 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_AXI_SPI_ENGINE is not set CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m -# CONFIG_SPI_BCM_QSPI is not set CONFIG_SPI_BITBANG=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y @@ -7965,29 +7967,21 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" # Security options # CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_TRUSTED_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set +CONFIG_ENCRYPTED_KEYS=y # CONFIG_KEY_DH_OPERATIONS is not set CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y -CONFIG_SECURITY_TIOCSTI_RESTRICT=y CONFIG_SECURITY=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_WRITABLE_HOOKS is not set CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_INFINIBAND is not set CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y # CONFIG_HARDENED_USERCOPY is not set -CONFIG_PAGE_SANITIZE=y -CONFIG_PAGE_SANITIZE_VERIFY=y -# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -8009,9 +8003,6 @@ CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -CONFIG_SECURITY_APPARMOR_DEBUG=y -CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y -CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y CONFIG_INTEGRITY=y @@ -8242,6 +8233,7 @@ CONFIG_CRC32_SLICEBY8=y CONFIG_CRC7=m CONFIG_LIBCRC32C=y # CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y diff --git a/kernels/linux-libre-lts-xtreme/config.i686 b/kernels/linux-libre-lts-xtreme/config.i686 index 7cc1cd539..c9081dc9e 100644 --- a/kernels/linux-libre-lts-xtreme/config.i686 +++ b/kernels/linux-libre-lts-xtreme/config.i686 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 4.9.74-gnu-1-lts-knock Kernel Configuration +# Linux/x86 4.9.92-gnu-1-lts-xtreme Kernel Configuration # # CONFIG_64BIT is not set CONFIG_X86_32=y @@ -74,8 +74,11 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y # CONFIG_USELIB is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y # # IRQ subsystem @@ -397,6 +400,7 @@ CONFIG_X86_FAST_FEATURE_TESTS=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_GOLDFISH is not set +CONFIG_RETPOLINE=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_AMD_PLATFORM_DEVICE is not set @@ -1787,6 +1791,7 @@ CONFIG_DEV_COREDUMP=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y @@ -5213,7 +5218,7 @@ CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set +CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y @@ -7869,17 +7874,13 @@ CONFIG_DEFAULT_IO_DELAY_TYPE=0 # Security options # CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y CONFIG_PERSISTENT_KEYRINGS=y # CONFIG_BIG_KEYS is not set CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=m CONFIG_KEY_DH_OPERATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY_TIOCSTI_RESTRICT=y -CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y CONFIG_SECURITY=y -CONFIG_PAGE_TABLE_ISOLATION=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y @@ -7889,10 +7890,6 @@ CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y CONFIG_HARDENED_USERCOPY=y -CONFIG_FORTIFY_SOURCE=y -CONFIG_PAGE_SANITIZE=y -CONFIG_PAGE_SANITIZE_VERIFY=y -# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -7911,9 +7908,6 @@ CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/usr/bin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/usr/bin/init" CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_DEBUG=y -CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y -CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y @@ -8021,7 +8015,7 @@ CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m @@ -8165,6 +8159,7 @@ CONFIG_CRC32_SLICEBY8=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_CRC8=m +CONFIG_AUDIT_GENERIC=y # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_842_COMPRESS=m diff --git a/kernels/linux-libre-lts-xtreme/config.x86_64 b/kernels/linux-libre-lts-xtreme/config.x86_64 index d198ed106..a7059b556 100644 --- a/kernels/linux-libre-lts-xtreme/config.x86_64 +++ b/kernels/linux-libre-lts-xtreme/config.x86_64 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 4.9.74-gnu-1-lts-xtreme Kernel Configuration +# Linux/x86 4.9.92-gnu-1-lts-xtreme Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y @@ -77,8 +77,11 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y # CONFIG_USELIB is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y # # IRQ subsystem @@ -222,6 +225,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_BPF_SYSCALL=y +# CONFIG_BPF_JIT_ALWAYS_ON is not set CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y @@ -415,6 +419,7 @@ CONFIG_X86_FAST_FEATURE_TESTS=y CONFIG_X86_X2APIC=y CONFIG_X86_MPPARSE=y # CONFIG_GOLDFISH is not set +CONFIG_RETPOLINE=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_AMD_PLATFORM_DEVICE is not set @@ -1789,6 +1794,7 @@ CONFIG_DEV_COREDUMP=y CONFIG_SYS_HYPERVISOR=y # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y @@ -5047,7 +5053,7 @@ CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set +CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y @@ -7620,24 +7626,17 @@ CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=m CONFIG_KEY_DH_OPERATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY_TIOCSTI_RESTRICT=y -CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y CONFIG_SECURITY=y CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_WRITABLE_HOOKS is not set CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_INFINIBAND=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y # CONFIG_INTEL_TXT is not set CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y CONFIG_HARDENED_USERCOPY=y -CONFIG_FORTIFY_SOURCE=y -CONFIG_PAGE_SANITIZE=y -CONFIG_PAGE_SANITIZE_VERIFY=y -# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 @@ -7656,9 +7655,6 @@ CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/usr/bin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/usr/bin/init" CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_DEBUG=y -CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y -CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y @@ -7768,7 +7764,7 @@ CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m diff --git a/kernels/linux-libre-lts-xtreme/linux.install b/kernels/linux-libre-lts-xtreme/linux.install index d13105b4b..f1f033b4e 100644 --- a/kernels/linux-libre-lts-xtreme/linux.install +++ b/kernels/linux-libre-lts-xtreme/linux.install @@ -1,31 +1,12 @@ -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod %KERNVER% - if [ "$(uname -m)" = "armv7l" ]; then - echo ">>> WARNING: Using this kernel requires an updated U-Boot!" - fi -} - post_upgrade() { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod %KERNVER% if [ "$(uname -m)" = "x86_64" ] || [ "$(uname -m)" = "i686" ]; then if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then echo "WARNING: /boot appears to be a separate partition but is not mounted." fi - - if [ $(vercmp $2 3.13) -lt 0 ]; then - echo ">>> WARNING: AT keyboard support is no longer built into the kernel." - echo ">>> In order to use your keyboard during early init, you MUST" - echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." - fi fi } post_remove() { - # also remove the compat symlinks rm -f boot/initramfs-%PKGBASE%.img rm -f boot/initramfs-%PKGBASE%-fallback.img } -- cgit v1.2.2