diff -ruN gforth-0.7.3/build-ec.in gforth-0.7.3-patched/build-ec.in
--- gforth-0.7.3/build-ec.in	2013-10-11 17:31:28.038991905 -0400
+++ gforth-0.7.3-patched/build-ec.in	2015-07-24 16:25:00.008107177 -0400
@@ -19,7 +19,7 @@
 
 arch=$1
 
-./gforth --die-on-signal -m 4M -p ".:~+:." -i @kernel_fi@ exboot.fs -e 'fpath= .|~+|.' -e "s\" arch/$arch/mach.fs\"" ./kernel/main.fs -e "save-cross kernl-$arch.fi- /usr/local/bin/gforth-0.6.2-20060312 bye"
+./gforth --die-on-signal -m 4M -p ".:~+:." -i @kernel_fi@ exboot.fs -e 'fpath= .|~+|.' -e "s\" arch/$arch/mach.fs\"" ./kernel/main.fs -e "save-cross kernl-$arch.fi- /usr/bin/gforth-0.6.2-20060312 bye"
 if [ -f `echo arch/$arch/mach.fs | sed s/fs/sh/` ] 
 then sh `echo arch/$arch/mach.fs | sed s/fs/sh/` kernl-$arch.fi
 else cp -p kernl-$arch.fi- kernl-$arch.fi
diff -ruN gforth-0.7.3/configure gforth-0.7.3-patched/configure
--- gforth-0.7.3/configure	2014-06-13 18:52:28.488838343 -0400
+++ gforth-0.7.3-patched/configure	2015-07-24 16:23:27.778934664 -0400
@@ -569,7 +569,7 @@
 #
 # Initializations.
 #
-ac_default_prefix=/usr/local
+ac_default_prefix=/usr
 ac_clean_files=
 ac_config_libobj_dir=.
 LIBOBJS=
@@ -5976,7 +5976,7 @@
   ;;
   *)
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
+as_dummy="$PATH:/sbin:/usr/sbin:/usr/bin"
 for as_dir in $as_dummy
 do
   IFS=$as_save_IFS
diff -ruN gforth-0.7.3/configure.in gforth-0.7.3-patched/configure.in
--- gforth-0.7.3/configure.in	2014-06-13 18:52:10.408636383 -0400
+++ gforth-0.7.3-patched/configure.in	2015-07-24 16:31:36.213823759 -0400
@@ -659,7 +659,7 @@
 AC_CHECK_FILE($srcdir/arch/$machine/disasm.fs,[disasm_fs=arch/$machine/disasm.fs],)
 AC_SUBST(disasm_fs)
 
-AC_PATH_PROG(INSTALL_INFO,install-info,[echo '>>>>Please make info dir entry:'],$PATH:/sbin:/usr/sbin:/usr/local/sbin)
+AC_PATH_PROG(INSTALL_INFO,install-info,[echo '>>>>Please make info dir entry:'],$PATH:/sbin:/usr/sbin:/usr/bin)
 
 case "$host_os" in
 	*win32*)
diff -ruN gforth-0.7.3/doc/gforth.1 gforth-0.7.3-patched/doc/gforth.1
--- gforth-0.7.3/doc/gforth.1	2013-10-11 17:31:28.043991965 -0400
+++ gforth-0.7.3-patched/doc/gforth.1	2015-07-24 16:37:50.552874465 -0400
@@ -75,7 +75,7 @@
 files instead of the default in the environment variable
 \fCGFORTHPATH\fR
 or the path specified at installation time (typically
-\fC/usr/local/lib/gforth:.\fR. A path is given as a 
+\fC/usr/lib/gforth:.\fR. A path is given as a 
 .BR : -separated
 list.
 .TP
diff -ruN gforth-0.7.3/doc/gforth.ds gforth-0.7.3-patched/doc/gforth.ds
--- gforth-0.7.3/doc/gforth.ds	2013-10-11 17:31:28.047992013 -0400
+++ gforth-0.7.3-patched/doc/gforth.ds	2015-07-24 16:39:59.918092652 -0400
@@ -699,7 +699,7 @@
 Uses @i{path} for searching the image file and Forth source code files
 instead of the default in the environment variable @code{GFORTHPATH} or
 the path specified at installation time (e.g.,
-@file{/usr/local/share/gforth/0.2.0:.}). A path is given as a list of
+@file{/usr/share/gforth/0.2.0:.}). A path is given as a list of
 directories, separated by @samp{:} (on Unix) or @samp{;} (on other OSs).
 
 @cindex --dictionary-size, command-line option
@@ -1060,19 +1060,19 @@
 
 @itemize @bullet
 @item
-@file{/usr/local/bin/gforth}
+@file{/usr/bin/gforth}
 @item
-@file{/usr/local/bin/gforthmi}
+@file{/usr/bin/gforthmi}
 @item
-@file{/usr/local/man/man1/gforth.1} - man page.
+@file{/usr/man/man1/gforth.1} - man page.
 @item
-@file{/usr/local/info} - the Info version of this manual.
+@file{/usr/info} - the Info version of this manual.
 @item
-@file{/usr/local/lib/gforth/<version>/...} - Gforth @file{.fi} files.
+@file{/usr/lib/gforth/<version>/...} - Gforth @file{.fi} files.
 @item
-@file{/usr/local/share/gforth/<version>/TAGS} - Emacs TAGS file.
+@file{/usr/share/gforth/<version>/TAGS} - Emacs TAGS file.
 @item
-@file{/usr/local/share/gforth/<version>/...} - Gforth source files.
+@file{/usr/share/gforth/<version>/...} - Gforth source files.
 @item
 @file{.../emacs/site-lisp/gforth.el} - Emacs gforth mode.
 @end itemize
@@ -4193,7 +4193,7 @@
 In common with many, if not most, Forth compilers, most of Gforth is
 actually written in Forth. All of the @file{.fs} files in the
 installation directory@footnote{For example,
-@file{/usr/local/share/gforth...}} are Forth source files, which you can
+@file{/usr/share/gforth...}} are Forth source files, which you can
 study to see examples of Forth programming.
 
 Gforth maintains a history file that records every line that you type to
@@ -14890,7 +14890,7 @@
 and one for your program, @pxref{Select Tags Table,,Selecting a Tags
 Table,emacs, Emacs Manual}). The TAGS file for the preloaded words is
 @file{$(datadir)/gforth/$(VERSION)/TAGS} (e.g.,
-@file{/usr/local/share/gforth/0.2.0/TAGS}).  To get the best behaviour
+@file{/usr/share/gforth/0.2.0/TAGS}).  To get the best behaviour
 with @file{etags.fs}, you should avoid putting definitions both before
 and after @code{require} etc., otherwise you will see the same file
 visited several times by commands like @code{tags-search}.
@@ -15346,7 +15346,7 @@
 format:
 
 @example
-#! /usr/local/bin/gforth-0.4.0 -i
+#! /usr/bin/gforth-0.4.0 -i
 @end example
 
 The file and pathname for the Gforth engine specified on this line is
@@ -15358,7 +15358,7 @@
 file into an executable. For example, if you place this text in a file:
 
 @example
-#! /usr/local/bin/gforth
+#! /usr/bin/gforth
 
 ." Hello, world" CR
 bye
diff -ruN gforth-0.7.3/doc/gforth.info-1 gforth-0.7.3-patched/doc/gforth.info-1
--- gforth-0.7.3/doc/gforth.info-1	2014-06-13 18:55:21.596773767 -0400
+++ gforth-0.7.3-patched/doc/gforth.info-1	2015-07-24 16:45:39.191289764 -0400
@@ -611,7 +611,7 @@
      Uses path for searching the image file and Forth source code files
      instead of the default in the environment variable `GFORTHPATH' or
      the path specified at installation time (e.g.,
-     `/usr/local/share/gforth/0.2.0:.'). A path is given as a list of
+     `/usr/share/gforth/0.2.0:.'). A path is given as a list of
      directories, separated by `:' (on Unix) or `;' (on other OSs).
 
 `--dictionary-size size'
@@ -906,19 +906,19 @@
 When you install Gforth on a Unix system, it installs files in these
 locations by default:
 
-   * `/usr/local/bin/gforth'
+   * `/usr/bin/gforth'
 
-   * `/usr/local/bin/gforthmi'
+   * `/usr/bin/gforthmi'
 
-   * `/usr/local/man/man1/gforth.1' - man page.
+   * `/usr/man/man1/gforth.1' - man page.
 
-   * `/usr/local/info' - the Info version of this manual.
+   * `/usr/info' - the Info version of this manual.
 
-   * `/usr/local/lib/gforth/<version>/...' - Gforth `.fi' files.
+   * `/usr/lib/gforth/<version>/...' - Gforth `.fi' files.
 
-   * `/usr/local/share/gforth/<version>/TAGS' - Emacs TAGS file.
+   * `/usr/share/gforth/<version>/TAGS' - Emacs TAGS file.
 
-   * `/usr/local/share/gforth/<version>/...' - Gforth source files.
+   * `/usr/share/gforth/<version>/...' - Gforth source files.
 
    * `.../emacs/site-lisp/gforth.el' - Emacs gforth mode.
 
@@ -3637,7 +3637,7 @@
    (1) Actually, there are some subtle differences - see *note The Text
 Interpreter::.
 
-   (2) For example, `/usr/local/share/gforth...'
+   (2) For example, `/usr/share/gforth...'
 
 
 File: gforth.info,  Node: Review - elements of a Forth system,  Next: Where to go next,  Prev: Forth is written in Forth,  Up: Introduction
diff -ruN gforth-0.7.3/doc/gforth.info-2 gforth-0.7.3-patched/doc/gforth.info-2
--- gforth-0.7.3/doc/gforth.info-2	2014-06-13 18:55:21.596773767 -0400
+++ gforth-0.7.3-patched/doc/gforth.info-2	2015-07-24 16:38:36.466931266 -0400
@@ -6271,7 +6271,7 @@
 (e.g., one for the Gforth sources and one for your program, *note
 Selecting a Tags Table: (emacs)Select Tags Table.). The TAGS file for
 the preloaded words is `$(datadir)/gforth/$(VERSION)/TAGS' (e.g.,
-`/usr/local/share/gforth/0.2.0/TAGS').  To get the best behaviour with
+`/usr/share/gforth/0.2.0/TAGS').  To get the best behaviour with
 `etags.fs', you should avoid putting definitions both before and after
 `require' etc., otherwise you will see the same file visited several
 times by commands like `tags-search'.
@@ -6686,7 +6686,7 @@
 just type image instead of `gforth -i image'.  This works because every
 `.fi' file starts with a line of this format:
 
-     #! /usr/local/bin/gforth-0.4.0 -i
+     #! /usr/bin/gforth-0.4.0 -i
 
    The file and pathname for the Gforth engine specified on this line is
 the specific Gforth executable that it was built against; i.e. the value
@@ -6696,7 +6696,7 @@
    You can make use of the same shell capability to make a Forth source
 file into an executable. For example, if you place this text in a file:
 
-     #! /usr/local/bin/gforth
+     #! /usr/bin/gforth
 
      ." Hello, world" CR
      bye
diff -ruN gforth-0.7.3/engine/main.c gforth-0.7.3-patched/engine/main.c
--- gforth-0.7.3/engine/main.c	2013-10-11 17:31:28.059992157 -0400
+++ gforth-0.7.3-patched/engine/main.c	2015-07-24 16:36:42.231671688 -0400
@@ -285,7 +285,7 @@
 
 #ifndef STANDALONE
 /* image file format:
- *  "#! binary-path -i\n" (e.g., "#! /usr/local/bin/gforth-0.4.0 -i\n")
+ *  "#! binary-path -i\n" (e.g., "#! /usr/bin/gforth-0.4.0 -i\n")
  *   padding to a multiple of 8
  *   magic: "Gforth3x" means format 0.6,
  *              where x is a byte with
diff -ruN gforth-0.7.3/engine/makefile.os2 gforth-0.7.3-patched/engine/makefile.os2
--- gforth-0.7.3/engine/makefile.os2	2013-10-11 17:32:17.346584391 -0400
+++ gforth-0.7.3-patched/engine/makefile.os2	2015-07-24 16:47:16.261883095 -0400
@@ -64,7 +64,7 @@
 # ------------	Install directories
 
 VPATH = .
-prefix = /usr/local
+prefix = /usr
 exec_prefix = ${prefix}
 srcdir = .
 bindir = ${exec_prefix}/bin
diff -ruN gforth-0.7.3/filedump.fs gforth-0.7.3-patched/filedump.fs
--- gforth-0.7.3/filedump.fs	2013-10-11 17:31:28.066992241 -0400
+++ gforth-0.7.3-patched/filedump.fs	2015-07-24 16:24:19.888463467 -0400
@@ -1,4 +1,4 @@
-#! /usr/local/lib/gforth/0.2.0/kernel.fi
+#! /usr/lib/gforth/0.2.0/kernel.fi
 \ file hex dump
 
 \ Copyright (C) 1997,2002,2003,2004,2007 Free Software Foundation, Inc.
diff -ruN gforth-0.7.3/fixpath.fs gforth-0.7.3-patched/fixpath.fs
--- gforth-0.7.3/fixpath.fs	2013-10-11 17:31:28.066992241 -0400
+++ gforth-0.7.3-patched/fixpath.fs	2015-07-24 16:24:32.041688325 -0400
@@ -19,7 +19,7 @@
 
 ." Fixing " 2 arg type ."  with " 1 arg type cr
 
-: "search s" .:/usr/local" ;
+: "search s" .:/usr" ;
 
 include string.fs
 
diff -ruN gforth-0.7.3/httpd.fs gforth-0.7.3-patched/httpd.fs
--- gforth-0.7.3/httpd.fs	2013-10-11 17:31:28.070992289 -0400
+++ gforth-0.7.3-patched/httpd.fs	2015-07-24 16:24:09.921886137 -0400
@@ -1,4 +1,4 @@
-#! /usr/local/bin/gforth
+#! /usr/bin/gforth
 
 \ Copyright (C) 2000,2002,2003,2004,2006,2007,2008 Free Software Foundation, Inc.
 
diff -ruN gforth-0.7.3/INSTALL gforth-0.7.3-patched/INSTALL
--- gforth-0.7.3/INSTALL	2013-10-11 17:31:27.998991424 -0400
+++ gforth-0.7.3-patched/INSTALL	2015-07-24 16:30:42.148538914 -0400
@@ -85,7 +85,7 @@
 
 configure has the following useful parameters:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [default: /usr/local]
+                          [default: /usr]
   --exec-prefix=PREFIX    install architecture-dependent files in PREFIX
                           [default: same as prefix]
   --help: tells you about other parameters.
@@ -95,7 +95,7 @@
 
 If you don't like the defaults for the installation directories, you
 should override them already during configure.  E.g., if you want to
-install in the /gnu hierarchy instead of in the default /usr/local
+install in the /gnu hierarchy instead of in the default /usr
 hierarchy, say
 
 ./configure --prefix=/gnu
@@ -168,17 +168,17 @@
 
 If you want to have some installation-specific files loaded when
 Gforth starts (e.g., an assembler for your processor), put commands
-for loading them into /usr/local/share/gforth/site-forth/siteinit.fs
+for loading them into /usr/share/gforth/site-forth/siteinit.fs
 (if the commands work for all architectures) or
-/usr/local/lib/gforth/site-forth/siteinit.fs (for
+/usr/lib/gforth/site-forth/siteinit.fs (for
 architecture-specific commands);
-/usr/local/lib/gforth/site-forth/siteinit.fs takes precedence if both
+/usr/lib/gforth/site-forth/siteinit.fs takes precedence if both
 files are present (unless you change the search path). The file names
 given above are the defaults; if you have changed the prefix, you have
-to replace "/usr/local" in these names with your prefix.
+to replace "/usr" in these names with your prefix.
 
 By default, the installation procedure creates an empty
-/usr/local/share/gforth/site-forth/siteinit.fs if there is no such
+/usr/share/gforth/site-forth/siteinit.fs if there is no such
 file.
 
 If you change the siteinit.fs file, you should run "make install"
@@ -203,8 +203,8 @@
 info files either from within Emacs (Ctrl-h i) or using the
 stand-alone Info reader, 'info'.
 
-If you use the default install root of '/usr/local' then the info
-files will be installed in '/usr/local/info'.
+If you use the default install root of '/usr' then the info
+files will be installed in '/usr/info'.
 
 Many GNU/Linux distributions are set up to put all of their
 documentation in '/usr/info', in which case you might have to do a
@@ -214,8 +214,8 @@
 1. Add an INFOPATH environment variable. The easiest place to do
 this is '/etc/profile', right next to PATH and MANPATH:
 
-INFOPATH=/usr/local/info:/usr/info
+INFOPATH=/usr/info:/usr/info
 
-2. Create a file called 'dir' in 'usr/local/info'. Use the file
+2. Create a file called 'dir' in 'usr/info'. Use the file
 '/usr/info/dir' as a template. You can add the line for gforth
 manually, or use '/sbin/install-info' (man install-info for details).
diff -ruN gforth-0.7.3/INSTALL.BINDIST gforth-0.7.3-patched/INSTALL.BINDIST
--- gforth-0.7.3/INSTALL.BINDIST	2013-10-11 17:31:27.998991424 -0400
+++ gforth-0.7.3-patched/INSTALL.BINDIST	2015-07-24 16:23:44.242117997 -0400
@@ -21,7 +21,7 @@
 of the source distribution, and a few more, in particular the
 executable `gforth'. The configuration options we used for creating it
 can be seen in config.status. Basically, we use the default; among
-other things, this means installation in the /usr/local hierarchy; if
+other things, this means installation in the /usr hierarchy; if
 this does not suit you, "make distclean" and continue by reading
 INSTALL.
 
diff -ruN gforth-0.7.3/makefile.os2 gforth-0.7.3-patched/makefile.os2
--- gforth-0.7.3/makefile.os2	2013-10-11 17:32:17.338584295 -0400
+++ gforth-0.7.3-patched/makefile.os2	2015-07-24 16:46:55.645099386 -0400
@@ -120,7 +120,7 @@
 # ------------	Install Directories
 
 VPATH = .
-prefix = /usr/local
+prefix = /usr
 exec_prefix = ${prefix}
 srcdir = .
 bindir = ${exec_prefix}/bin
diff -ruN gforth-0.7.3/mkos2mf.sed gforth-0.7.3-patched/mkos2mf.sed
--- gforth-0.7.3/mkos2mf.sed	2013-10-11 17:31:28.086992482 -0400
+++ gforth-0.7.3-patched/mkos2mf.sed	2015-07-24 16:46:28.724939509 -0400
@@ -28,7 +28,7 @@
 s%@LDFLAGS@%%g
 s%@LIBS@%-lm %g
 s%@exec_prefix@%${prefix}%g
-s%@prefix@%/usr/local%g
+s%@prefix@%/usr%g
 s%@program_transform_name@%s,x,x,%g
 s%@bindir@%${exec_prefix}/bin%g
 s%@sbindir@%${exec_prefix}/sbin%g