* $wgServer = 'http://example.com'; * * * This is usually detected correctly by MediaWiki. If MediaWiki detects the * wrong server, it will redirect incorrectly after you save a page. In that * case, set this variable to fix it. * * If you want to use protocol-relative URLs on your wiki, set this to a * protocol-relative URL like '//example.com' and set $wgCanonicalServer * to a fully qualified URL. */ $wgServer = WebRequest::detectServer(); /** * Canonical URL of the server, to use in IRC feeds and notification e-mails. * Must be fully qualified, even if $wgServer is protocol-relative. * * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed. */ $wgCanonicalServer = false; /************************************************************************//** * @name Script path settings * @{ */ /** * The path we should point to. * It might be a virtual path in case with use apache mod_rewrite for example. * * This *needs* to be set correctly. * * Other paths will be set to defaults based on it unless they are directly * set in LocalSettings.php */ $wgScriptPath = '/wiki'; /** * Whether to support URLs like index.php/Page_title These often break when PHP * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set, * but then again it may not; lighttpd converts incoming path data to lowercase * on systems with case-insensitive filesystems, and there have been reports of * problems on Apache as well. * * To be safe we'll continue to keep it off by default. * * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly * incorrect garbage, or to true if it is really correct. * * The default $wgArticlePath will be set based on this value at runtime, but if * you have customized it, having this incorrectly set to true can cause * redirect loops when "pretty URLs" are used. */ $wgUsePathInfo = ( strpos( php_sapi_name(), 'cgi' ) === false ) && ( strpos( php_sapi_name(), 'apache2filter' ) === false ) && ( strpos( php_sapi_name(), 'isapi' ) === false ); /** * The extension to append to script names by default. This can either be .php * or .php5. * * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This * variable is provided to support those providers. */ $wgScriptExtension = '.php'; /** * The URL path to index.php. * * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}". */ $wgScript = false; /** * The URL path to redirect.php. This is a script that is used by the Nostalgia * skin. * * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}". */ $wgRedirectScript = false; ///< defaults to /** * The URL path to load.php. * * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}". */ $wgLoadScript = false; /**@}*/ /************************************************************************//** * @name URLs and file paths * * These various web and file path variables are set to their defaults * in Setup.php if they are not explicitly set from LocalSettings.php. * If you do override them, be sure to set them all! * * These will relatively rarely need to be set manually, unless you are * splitting style sheets or images outside the main document root. * * In this section, a "path" is usually a host-relative URL, i.e. a URL without * the host part, that starts with a slash. In most cases a full URL is also * acceptable. A "directory" is a local file path. * * In both paths and directories, trailing slashes should not be included. * * @{ */ /** * The URL path of the skins directory. Defaults to "{$wgScriptPath}/skins" */ $wgStylePath = false; $wgStyleSheetPath = &$wgStylePath; /** * The URL path of the skins directory. Should not point to an external domain. * Defaults to "{$wgScriptPath}/skins". */ $wgLocalStylePath = false; /** * The URL path of the extensions directory. * Defaults to "{$wgScriptPath}/extensions". * @since 1.16 */ $wgExtensionAssetsPath = false; /** * Filesystem stylesheets directory. Defaults to "{$IP}/skins" */ $wgStyleDirectory = false; /** * The URL path for primary article page views. This path should contain $1, * which is replaced by the article title. * * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on * $wgUsePathInfo. */ $wgArticlePath = false; /** * The URL path for the images directory. Defaults to "{$wgScriptPath}/images" */ $wgUploadPath = false; /** * The filesystem path of the images directory. Defaults to "{$IP}/images". */ $wgUploadDirectory = false; /** * The URL path of the wiki logo. The logo size should be 135x135 pixels. * Defaults to "{$wgStylePath}/common/images/wiki.png". */ $wgLogo = false; /** * The URL path of the shortcut icon. */ $wgFavicon = '/favicon.ico'; /** * The URL path of the icon for iPhone and iPod Touch web app bookmarks. * Defaults to no icon. */ $wgAppleTouchIcon = false; /** * The local filesystem path to a temporary directory. This is not required to * be web accessible. * * Defaults to "{$wgUploadDirectory}/tmp". */ $wgTmpDirectory = false; /** * If set, this URL is added to the start of $wgUploadPath to form a complete * upload URL. */ $wgUploadBaseUrl = ""; /** * To enable remote on-demand scaling, set this to the thumbnail base URL. * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg * where 'e6' are the first two characters of the MD5 hash of the file name. * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed. */ $wgUploadStashScalerBaseUrl = false; /** * To set 'pretty' URL paths for actions other than * plain page views, add to this array. For instance: * 'edit' => "$wgScriptPath/edit/$1" * * There must be an appropriate script or rewrite rule * in place to handle these URLs. */ $wgActionPaths = array(); /**@}*/ /************************************************************************//** * @name Files and file uploads * @{ */ /** Uploads have to be specially set up to be secure */ $wgEnableUploads = false; /** Allows to move images and other media files */ $wgAllowImageMoving = true; /** * These are additional characters that should be replaced with '-' in file names */ $wgIllegalFileChars = ":"; /** * @deprecated since 1.17 use $wgDeletedDirectory */ $wgFileStore = array(); /** * What directory to place deleted uploads in */ $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted /** * Set this to true if you use img_auth and want the user to see details on why access failed. */ $wgImgAuthDetails = false; /** * If this is enabled, img_auth.php will not allow image access unless the wiki * is private. This improves security when image uploads are hosted on a * separate domain. */ $wgImgAuthPublicTest = true; /** * File repository structures * * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is * an array of such structures. Each repository structure is an associative * array of properties configuring the repository. * * Properties required for all repos: * - class The class name for the repository. May come from the core or an extension. * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo. * * - name A unique name for the repository (but $wgLocalFileRepo should be 'local'). * * For most core repos: * - url Base public URL * - hashLevels The number of directory levels for hash-based division of files * - thumbScriptUrl The URL for thumb.php (optional, not recommended) * - transformVia404 Whether to skip media file transformation on parse and rely on a 404 * handler instead. * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE], * determines whether filenames implicitly start with a capital letter. * The current implementation may give incorrect description page links * when the local $wgCapitalLinks and initialCapital are mismatched. * - pathDisclosureProtection * May be 'paranoid' to remove all parameters from error messages, 'none' to * leave the paths in unchanged, or 'simple' to replace paths with * placeholders. Default for LocalRepo is 'simple'. * - fileMode This allows wikis to set the file mode when uploading/moving files. Default * is 0644. * - directory The local filesystem directory where public files are stored. Not used for * some remote repos. * - thumbDir The base thumbnail directory. Defaults to /thumb. * - thumbUrl The base thumbnail URL. Defaults to /thumb. * * * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored * for local repositories: * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File: * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g. * http://en.wikipedia.org/w * - scriptExtension Script extension of the MediaWiki installation, equivalent to * $wgScriptExtension, e.g. .php5 defaults to .php * * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1 * - fetchDescription Fetch the text of the remote file description page. Equivalent to * $wgFetchCommonsDescriptions. * * ForeignDBRepo: * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags * equivalent to the corresponding member of $wgDBservers * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc * * ForeignAPIRepo: * - apibase Use for the foreign API's URL * - apiThumbCacheExpiry How long to locally cache thumbs for * * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values. * Otherwise, set $wgLocalFileRepo to a repository structure as described above. * If you set $wgUseInstantCommons to true, it will add an entry for Commons. * If you set $wgForeignFileRepos to an array of repostory structures, those will * be searched after the local file repo. * Otherwise, you will only have access to local media files. */ $wgLocalFileRepo = false; /** @see $wgLocalFileRepo */ $wgForeignFileRepos = array(); /** * Use Commons as a remote file repository. Essentially a wrapper, when this * is enabled $wgForeignFileRepos will point at Commons with a set of default * settings */ $wgUseInstantCommons = false; /** * Show EXIF data, on by default if available. * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php * * NOTE FOR WINDOWS USERS: * To enable EXIF functions, add the following lines to the * "Windows extensions" section of php.ini: * * extension=extensions/php_mbstring.dll * extension=extensions/php_exif.dll */ $wgShowEXIF = function_exists( 'exif_read_data' ); /** * If to automatically update the img_metadata field * if the metadata field is outdated but compatible with the current version. * Defaults to false. */ $wgUpdateCompatibleMetadata = false; /** * If you operate multiple wikis, you can define a shared upload path here. * Uploads to this wiki will NOT be put there - they will be put into * $wgUploadDirectory. * If $wgUseSharedUploads is set, the wiki will look in the shared repository if * no file of the given name is found in the local repository (for [[File:..]], * [[Media:..]] links). Thumbnails will also be looked for and generated in this * directory. * * Note that these configuration settings can now be defined on a per- * repository basis for an arbitrary number of file repositories, using the * $wgForeignFileRepos variable. */ $wgUseSharedUploads = false; /** Full path on the web server where shared uploads can be found */ $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images"; /** Fetch commons image description pages and display them on the local wiki? */ $wgFetchCommonsDescriptions = false; /** Path on the file system where shared uploads can be found. */ $wgSharedUploadDirectory = "/var/www/wiki3/images"; /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */ $wgSharedUploadDBname = false; /** Optional table prefix used in database. */ $wgSharedUploadDBprefix = ''; /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */ $wgCacheSharedUploads = true; /** * Allow for upload to be copied from an URL. Requires Special:Upload?source=web * The timeout for copy uploads is set by $wgHTTPTimeout. */ $wgAllowCopyUploads = false; /** * Allow asynchronous copy uploads. * This feature is experimental and broken as of r81612. */ $wgAllowAsyncCopyUploads = false; /** * Max size for uploads, in bytes. If not set to an array, applies to all * uploads. If set to an array, per upload type maximums can be set, using the * file and url keys. If the * key is set this value will be used as maximum * for non-specified types. * * For example: * $wgMaxUploadSize = array( * '*' => 250 * 1024, * 'url' => 500 * 1024, * ); * Sets the maximum for all uploads to 250 kB except for upload-by-url, which * will have a maximum of 500 kB. * */ $wgMaxUploadSize = 1024*1024*100; # 100MB /** * Point the upload navigation link to an external URL * Useful if you want to use a shared repository by default * without disabling local uploads (use $wgEnableUploads = false for that) * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload'; */ $wgUploadNavigationUrl = false; /** * Point the upload link for missing files to an external URL, as with * $wgUploadNavigationUrl. The URL will get (?|&)wpDestFile= * appended to it as appropriate. */ $wgUploadMissingFileUrl = false; /** * Give a path here to use thumb.php for thumbnail generation on client request, instead of * generating them on render and outputting a static URL. This is necessary if some of your * apache servers don't have read/write access to the thumbnail path. * * Example: * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}"; */ $wgThumbnailScriptPath = false; $wgSharedThumbnailScriptPath = false; /** * Set this to false if you do not want MediaWiki to divide your images * directory into many subdirectories, for improved performance. * * It's almost always good to leave this enabled. In previous versions of * MediaWiki, some users set this to false to allow images to be added to the * wiki by simply copying them into $wgUploadDirectory and then running * maintenance/rebuildImages.php to register them in the database. This is no * longer recommended, use maintenance/importImages.php instead. * * Note that this variable may be ignored if $wgLocalFileRepo is set. */ $wgHashedUploadDirectory = true; /** * Set the following to false especially if you have a set of files that need to * be accessible by all wikis, and you do not want to use the hash (path/a/aa/) * directory layout. */ $wgHashedSharedUploadDirectory = true; /** * Base URL for a repository wiki. Leave this blank if uploads are just stored * in a shared directory and not meant to be accessible through a separate wiki. * Otherwise the image description pages on the local wiki will link to the * image description page on this wiki. * * Please specify the namespace, as in the example below. */ $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:"; /** * This is the list of preferred extensions for uploading files. Uploading files * with extensions not in this list will trigger a warning. * * WARNING: If you add any OpenOffice or Microsoft Office file formats here, * such as odt or doc, and untrusted users are allowed to upload files, then * your wiki will be vulnerable to cross-site request forgery (CSRF). */ $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' ); /** Files with these extensions will never be allowed as uploads. */ $wgFileBlacklist = array( # HTML may contain cookie-stealing JavaScript and web bugs 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht', # PHP scripts may execute arbitrary code on the server 'php', 'phtml', 'php3', 'php4', 'php5', 'phps', # Other types that may be interpreted by some servers 'shtml', 'jhtml', 'pl', 'py', 'cgi', # May contain harmful executables for Windows victims 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' ); /** * Files with these mime types will never be allowed as uploads * if $wgVerifyMimeType is enabled. */ $wgMimeTypeBlacklist = array( # HTML may contain cookie-stealing JavaScript and web bugs 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript', # PHP scripts may execute arbitrary code on the server 'application/x-php', 'text/x-php', # Other types that may be interpreted by some servers 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh', # Client-side hazards on Internet Explorer 'text/scriptlet', 'application/x-msdownload', # Windows metafile, client-side vulnerability on some systems 'application/x-msmetafile', ); /** * Allow Java archive uploads. * This is not recommended for public wikis since a maliciously-constructed * applet running on the same domain as the wiki can steal the user's cookies. */ $wgAllowJavaUploads = false; /** * This is a flag to determine whether or not to check file extensions on upload. * * WARNING: setting this to false is insecure for public wikis. */ $wgCheckFileExtensions = true; /** * If this is turned off, users may override the warning for files not covered * by $wgFileExtensions. * * WARNING: setting this to false is insecure for public wikis. */ $wgStrictFileExtensions = true; /** Warn if uploaded files are larger than this (in bytes), or false to disable*/ $wgUploadSizeWarning = false; /** * list of trusted media-types and mime types. * Use the MEDIATYPE_xxx constants to represent media types. * This list is used by File::isSafeFile * * Types not listed here will have a warning about unsafe content * displayed on the images description page. It would also be possible * to use this for further restrictions, like disabling direct * [[media:...]] links for non-trusted formats. */ $wgTrustedMediaFormats = array( MEDIATYPE_BITMAP, //all bitmap formats MEDIATYPE_AUDIO, //all audio formats MEDIATYPE_VIDEO, //all plain video formats "image/svg+xml", //svg (only needed if inline rendering of svg is not supported) "application/pdf", //PDF files #"application/x-shockwave-flash", //flash/shockwave movie ); /** * Plugins for media file type handling. * Each entry in the array maps a MIME type to a class name */ $wgMediaHandlers = array( 'image/jpeg' => 'JpegHandler', 'image/png' => 'PNGHandler', 'image/gif' => 'GIFHandler', 'image/tiff' => 'TiffHandler', 'image/x-ms-bmp' => 'BmpHandler', 'image/x-bmp' => 'BmpHandler', 'image/svg+xml' => 'SvgHandler', // official 'image/svg' => 'SvgHandler', // compat 'image/vnd.djvu' => 'DjVuHandler', // official 'image/x.djvu' => 'DjVuHandler', // compat 'image/x-djvu' => 'DjVuHandler', // compat ); /** * Resizing can be done using PHP's internal image libraries or using * ImageMagick or another third-party converter, e.g. GraphicMagick. * These support more file formats than PHP, which only supports PNG, * GIF, JPG, XBM and WBMP. * * Use Image Magick instead of PHP builtin functions. */ $wgUseImageMagick = false; /** The convert command shipped with ImageMagick */ $wgImageMagickConvertCommand = '/usr/bin/convert'; /** Sharpening parameter to ImageMagick */ $wgSharpenParameter = '0x0.4'; /** Reduction in linear dimensions below which sharpening will be enabled */ $wgSharpenReductionThreshold = 0.85; /** * Temporary directory used for ImageMagick. The directory must exist. Leave * this set to false to let ImageMagick decide for itself. */ $wgImageMagickTempDir = false; /** * Use another resizing converter, e.g. GraphicMagick * %s will be replaced with the source path, %d with the destination * %w and %h will be replaced with the width and height. * * Example for GraphicMagick: * * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d" * * * Leave as false to skip this. */ $wgCustomConvertCommand = false; /** * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some image formats. */ $wgExiv2Command = '/usr/bin/exiv2'; /** * Scalable Vector Graphics (SVG) may be uploaded as images. * Since SVG support is not yet standard in browsers, it is * necessary to rasterize SVGs to PNG as a fallback format. * * An external program is required to perform this conversion. * If set to an array, the first item is a PHP callable and any further items * are passed as parameters after $srcPath, $dstPath, $width, $height */ $wgSVGConverters = array( 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output', 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output', 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output', 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input', 'rsvg' => '$path/rsvg -w$width -h$height $input $output', 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output', 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ), ); /** Pick a converter defined in $wgSVGConverters */ $wgSVGConverter = 'ImageMagick'; /** If not in the executable PATH, specify the SVG converter path. */ $wgSVGConverterPath = ''; /** Don't scale a SVG larger than this */ $wgSVGMaxSize = 2048; /** Don't read SVG metadata beyond this point. * Default is 1024*256 bytes */ $wgSVGMetadataCutoff = 262144; /** * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading * crap files as images. When this directive is on, will be allowed in files with * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured * and doesn't send appropriate MIME types for SVG images. */ $wgAllowTitlesInSVG = false; /** * Don't thumbnail an image if it will use too much working memory. * Default is 50 MB if decompressed to RGBA form, which corresponds to * 12.5 million pixels or 3500x3500 */ $wgMaxImageArea = 1.25e7; /** * Force thumbnailing of animated GIFs above this size to a single * frame instead of an animated thumbnail. As of MW 1.17 this limit * is checked against the total size of all frames in the animation. * It probably makes sense to keep this equal to $wgMaxImageArea. */ $wgMaxAnimatedGifArea = 1.25e7; /** * Browsers don't support TIFF inline generally... * For inline display, we need to convert to PNG or JPEG. * Note scaling should work with ImageMagick, but may not with GD scaling. * * Example: * <code> * // PNG is lossless, but inefficient for photos * $wgTiffThumbnailType = array( 'png', 'image/png' ); * // JPEG is good for photos, but has no transparency support. Bad for diagrams. * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' ); * </code> */ $wgTiffThumbnailType = false; /** * If rendered thumbnail files are older than this timestamp, they * will be rerendered on demand as if the file didn't already exist. * Update if there is some need to force thumbs and SVG rasterizations * to rerender, such as fixes to rendering bugs. */ $wgThumbnailEpoch = '20030516000000'; /** * If set, inline scaled images will still produce <img> tags ready for * output instead of showing an error message. * * This may be useful if errors are transitory, especially if the site * is configured to automatically render thumbnails on request. * * On the other hand, it may obscure error conditions from debugging. * Enable the debug log or the 'thumbnail' log group to make sure errors * are logged to a file for review. */ $wgIgnoreImageErrors = false; /** * Allow thumbnail rendering on page view. If this is false, a valid * thumbnail URL is still output, but no file will be created at * the target location. This may save some time if you have a * thumb.php or 404 handler set up which is faster than the regular * webserver(s). */ $wgGenerateThumbnailOnParse = true; /** * Show thumbnails for old images on the image description page */ $wgShowArchiveThumbnails = true; /** Obsolete, always true, kept for compatibility with extensions */ $wgUseImageResize = true; /** * If set to true, images that contain certain the exif orientation tag will * be rotated accordingly. If set to null, try to auto-detect whether a scaler * is available that can rotate. */ $wgEnableAutoRotation = null; /** * Internal name of virus scanner. This servers as a key to the * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not * null, every file uploaded will be scanned for viruses. */ $wgAntivirus= null; /** * Configuration for different virus scanners. This an associative array of * associative arrays. It contains one setup array per known scanner type. * The entry is selected by $wgAntivirus, i.e. * valid values for $wgAntivirus are the keys defined in this array. * * The configuration array for each scanner contains the following keys: * "command", "codemap", "messagepattern": * * "command" is the full command to call the virus scanner - %f will be * replaced with the name of the file to scan. If not present, the filename * will be appended to the command. Note that this must be overwritten if the * scanner is not in the system path; in that case, plase set * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full * path. * * "codemap" is a mapping of exit code to return codes of the detectVirus * function in SpecialUpload. * - An exit code mapped to AV_SCAN_FAILED causes the function to consider * the scan to be failed. This will pass the file if $wgAntivirusRequired * is not set. * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider * the file to have an usupported format, which is probably imune to * virusses. This causes the file to pass. * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning * no virus was found. * - All other codes (like AV_VIRUS_FOUND) will cause the function to report * a virus. * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise. * * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners * output. The relevant part should be matched as group one (\1). * If not defined or the pattern does not match, the full message is shown to the user. */ $wgAntivirusSetup = array( #setup for clamav 'clamav' => array ( 'command' => "clamscan --no-summary ", 'codemap' => array ( "0" => AV_NO_VIRUS, # no virus "1" => AV_VIRUS_FOUND, # virus found "52" => AV_SCAN_ABORTED, # unsupported file format (probably imune) "*" => AV_SCAN_FAILED, # else scan failed ), 'messagepattern' => '/.*?:(.*)/sim', ), #setup for f-prot 'f-prot' => array ( 'command' => "f-prot ", 'codemap' => array ( "0" => AV_NO_VIRUS, # no virus "3" => AV_VIRUS_FOUND, # virus found "6" => AV_VIRUS_FOUND, # virus found "*" => AV_SCAN_FAILED, # else scan failed ), 'messagepattern' => '/.*?Infection:(.*)$/m', ), ); /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */ $wgAntivirusRequired = true; /** Determines if the mime type of uploaded files should be checked */ $wgVerifyMimeType = true; /** Sets the mime type definition file to use by MimeMagic.php. */ $wgMimeTypeFile = "includes/mime.types"; #$wgMimeTypeFile= "/etc/mime.types"; #$wgMimeTypeFile= null; #use built-in defaults only. /** Sets the mime type info file to use by MimeMagic.php. */ $wgMimeInfoFile= "includes/mime.info"; #$wgMimeInfoFile= null; #use built-in defaults only. /** * Switch for loading the FileInfo extension by PECL at runtime. * This should be used only if fileinfo is installed as a shared object * or a dynamic library. */ $wgLoadFileinfoExtension = false; /** Sets an external mime detector program. The command must print only * the mime type to standard output. * The name of the file to process will be appended to the command given here. * If not set or NULL, mime_content_type will be used if available. * Example: * <code> * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux) * </code> */ $wgMimeDetectorCommand = null; /** * Switch for trivial mime detection. Used by thumb.php to disable all fancy * things, because only a few types of images are needed and file extensions * can be trusted. */ $wgTrivialMimeDetection = false; /** * Additional XML types we can allow via mime-detection. * array = ( 'rootElement' => 'associatedMimeType' ) */ $wgXMLMimeTypes = array( 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml', 'svg' => 'image/svg+xml', 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram', 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml? 'html' => 'text/html', // application/xhtml+xml? ); /** * Limit images on image description pages to a user-selectable limit. In order * to reduce disk usage, limits can only be selected from a list. * The user preference is saved as an array offset in the database, by default * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you * change it if you alter the array (see bug 8858). * This is the list of settings the user can choose from: */ $wgImageLimits = array ( array(320,240), array(640,480), array(800,600), array(1024,768), array(1280,1024), array(10000,10000) ); /** * Adjust thumbnails on image pages according to a user setting. In order to * reduce disk usage, the values can only be selected from a list. This is the * list of settings the user can choose from: */ $wgThumbLimits = array( 120, 150, 180, 200, 250, 300 ); /** * Default parameters for the <gallery> tag */ $wgGalleryOptions = array ( 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px") 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px") 'captionLength' => 25, // Length of caption to truncate (in characters) 'showBytes' => true, // Show the filesize in bytes in categories ); /** * Adjust width of upright images when parameter 'upright' is used * This allows a nicer look for upright images without the need to fix the width * by hardcoded px in wiki sourcecode. */ $wgThumbUpright = 0.75; /** * Default value for chmoding of new directories. */ $wgDirectoryMode = 0777; /** * DJVU settings * Path of the djvudump executable * Enable this and $wgDjvuRenderer to enable djvu rendering */ # $wgDjvuDump = 'djvudump'; $wgDjvuDump = null; /** * Path of the ddjvu DJVU renderer * Enable this and $wgDjvuDump to enable djvu rendering */ # $wgDjvuRenderer = 'ddjvu'; $wgDjvuRenderer = null; /** * Path of the djvutxt DJVU text extraction utility * Enable this and $wgDjvuDump to enable text layer extraction from djvu files */ # $wgDjvuTxt = 'djvutxt'; $wgDjvuTxt = null; /** * Path of the djvutoxml executable * This works like djvudump except much, much slower as of version 3.5. * * For now I recommend you use djvudump instead. The djvuxml output is * probably more stable, so we'll switch back to it as soon as they fix * the efficiency problem. * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583 */ # $wgDjvuToXML = 'djvutoxml'; $wgDjvuToXML = null; /** * Shell command for the DJVU post processor * Default: pnmtopng, since ddjvu generates ppm output * Set this to false to output the ppm file directly. */ $wgDjvuPostProcessor = 'pnmtojpeg'; /** * File extension for the DJVU post processor output */ $wgDjvuOutputExtension = 'jpg'; /** @} */ # end of file uploads } /************************************************************************//** * @name Email settings * @{ */ $serverName = substr( $wgServer, strrpos( $wgServer, '/' ) + 1 ); /** * Site admin email address. */ $wgEmergencyContact = 'wikiadmin@' . $serverName; /** * Password reminder email address. * * The address we should use as sender when a user is requesting his password. */ $wgPasswordSender = 'apache@' . $serverName; unset( $serverName ); # Don't leak local variables to global scope /** * Password reminder name */ $wgPasswordSenderName = 'MediaWiki Mail'; /** * Dummy address which should be accepted during mail send action. * It might be necessary to adapt the address or to set it equal * to the $wgEmergencyContact address. */ $wgNoReplyAddress = 'reply@not.possible'; /** * Set to true to enable the e-mail basic features: * Password reminders, etc. If sending e-mail on your * server doesn't work, you might want to disable this. */ $wgEnableEmail = true; /** * Set to true to enable user-to-user e-mail. * This can potentially be abused, as it's hard to track. */ $wgEnableUserEmail = true; /** * Set to true to put the sending user's email in a Reply-To header * instead of From. ($wgEmergencyContact will be used as From.) * * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value, * which can cause problems with SPF validation and leak recipient addressses * when bounces are sent to the sender. */ $wgUserEmailUseReplyTo = false; /** * Minimum time, in hours, which must elapse between password reminder * emails for a given account. This is to prevent abuse by mail flooding. */ $wgPasswordReminderResendTime = 24; /** * The time, in seconds, when an emailed temporary password expires. */ $wgNewPasswordExpiry = 3600 * 24 * 7; /** * The time, in seconds, when an email confirmation email expires */ $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60; /** * SMTP Mode * For using a direct (authenticated) SMTP server connection. * Default to false or fill an array : * <code> * "host" => 'SMTP domain', * "IDHost" => 'domain for MessageID', * "port" => "25", * "auth" => true/false, * "username" => user, * "password" => password * </code> */ $wgSMTP = false; /** * Additional email parameters, will be passed as the last argument to mail() call. * If using safe_mode this has no effect */ $wgAdditionalMailParams = null; /** * True: from page editor if s/he opted-in. False: Enotif mails appear to come * from $wgEmergencyContact */ $wgEnotifFromEditor = false; // TODO move UPO to preferences probably ? # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion # If set to false, the corresponding input form on the user preference page is suppressed # It call this to be a "user-preferences-option (UPO)" /** * Require email authentication before sending mail to an email addres. This is * highly recommended. It prevents MediaWiki from being used as an open spam * relay. */ $wgEmailAuthentication = true; /** * Allow users to enable email notification ("enotif") on watchlist changes. */ $wgEnotifWatchlist = false; /** * Allow users to enable email notification ("enotif") when someone edits their * user talk page. */ $wgEnotifUserTalk = false; /** * Set the Reply-to address in notifications to the editor's address, if user * allowed this in the preferences. */ $wgEnotifRevealEditorAddress = false; /** * Send notification mails on minor edits to watchlist pages. This is enabled * by default. Does not affect user talk notifications. */ $wgEnotifMinorEdits = true; /** * Send a generic mail instead of a personalised mail for each user. This * always uses UTC as the time zone, and doesn't include the username. * * For pages with many users watching, this can significantly reduce mail load. * Has no effect when using sendmail rather than SMTP. */ $wgEnotifImpersonal = false; /** * Maximum number of users to mail at once when using impersonal mail. Should * match the limit on your mail server. */ $wgEnotifMaxRecips = 500; /** * Send mails via the job queue. This can be useful to reduce the time it * takes to save a page that a lot of people are watching. */ $wgEnotifUseJobQ = false; /** * Use real name instead of username in e-mail "from" field. */ $wgEnotifUseRealName = false; /** * Array of usernames who will be sent a notification email for every change * which occurs on a wiki. */ $wgUsersNotifiedOnAllChanges = array(); /** @} */ # end of email settings /************************************************************************//** * @name Database settings * @{ */ /** Database host name or IP address */ $wgDBserver = 'localhost'; /** Database port number (for PostgreSQL) */ $wgDBport = 5432; /** Name of the database */ $wgDBname = 'my_wiki'; /** Database username */ $wgDBuser = 'wikiuser'; /** Database user's password */ $wgDBpassword = ''; /** Database type */ $wgDBtype = 'mysql'; /** Separate username for maintenance tasks. Leave as null to use the default. */ $wgDBadminuser = null; /** Separate password for maintenance tasks. Leave as null to use the default. */ $wgDBadminpassword = null; /** * Search type. * Leave as null to select the default search engine for the * selected database type (eg SearchMySQL), or set to a class * name to override to a custom search engine. */ $wgSearchType = null; /** Table name prefix */ $wgDBprefix = ''; /** MySQL table options to use during installation or update */ $wgDBTableOptions = 'ENGINE=InnoDB'; /** * SQL Mode - default is turning off all modes, including strict, if set. * null can be used to skip the setting for performance reasons and assume * DBA has done his best job. * String override can be used for some additional fun :-) */ $wgSQLMode = ''; /** Mediawiki schema */ $wgDBmwschema = 'mediawiki'; /** To override default SQLite data directory ($docroot/../data) */ $wgSQLiteDataDir = ''; /** * Make all database connections secretly go to localhost. Fool the load balancer * thinking there is an arbitrarily large cluster of servers to connect to. * Useful for debugging. */ $wgAllDBsAreLocalhost = false; /** * Shared database for multiple wikis. Commonly used for storing a user table * for single sign-on. The server for this database must be the same as for the * main database. * * For backwards compatibility the shared prefix is set to the same as the local * prefix, and the user table is listed in the default list of shared tables. * The user_properties table is also added so that users will continue to have their * preferences shared (preferences were stored in the user table prior to 1.16) * * $wgSharedTables may be customized with a list of tables to share in the shared * datbase. However it is advised to limit what tables you do share as many of * MediaWiki's tables may have side effects if you try to share them. * EXPERIMENTAL * * $wgSharedPrefix is the table prefix for the shared database. It defaults to * $wgDBprefix. */ $wgSharedDB = null; /** @see $wgSharedDB */ $wgSharedPrefix = false; /** @see $wgSharedDB */ $wgSharedTables = array( 'user', 'user_properties' ); /** * Database load balancer * This is a two-dimensional array, an array of server info structures * Fields are: * - host: Host name * - dbname: Default database name * - user: DB user * - password: DB password * - type: "mysql" or "postgres" * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0 * - groupLoads: array of load ratios, the key is the query group name. A query may belong * to several groups, the most specific group defined here is used. * * - flags: bit field * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended) * - DBO_DEBUG -- equivalent of $wgDebugDumpSql * - DBO_TRX -- wrap entire request in a transaction * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php) * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php) * * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation * - max threads: (optional) Maximum number of running threads * * These and any other user-defined properties will be assigned to the mLBInfo member * variable of the Database object. * * Leave at false to use the single-server variables above. If you set this * variable, the single-server variables will generally be ignored (except * perhaps in some command-line scripts). * * The first server listed in this array (with key 0) will be the master. The * rest of the servers will be slaves. To prevent writes to your slaves due to * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your * slaves in my.cnf. You can set read_only mode at runtime using: * * <code> * SET @@read_only=1; * </code> * * Since the effect of writing to a slave is so damaging and difficult to clean * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even * our masters, and then set read_only=0 on masters at runtime. */ $wgDBservers = false; /** * Load balancer factory configuration * To set up a multi-master wiki farm, set the class here to something that * can return a LoadBalancer with an appropriate master on a call to getMainLB(). * The class identified here is responsible for reading $wgDBservers, * $wgDBserver, etc., so overriding it may cause those globals to be ignored. * * The LBFactory_Multi class is provided for this purpose, please see * includes/db/LBFactory_Multi.php for configuration information. */ $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' ); /** How long to wait for a slave to catch up to the master */ $wgMasterWaitTimeout = 10; /** File to log database errors to */ $wgDBerrorLog = false; /** When to give an error message */ $wgDBClusterTimeout = 10; /** * Scale load balancer polling time so that under overload conditions, the database server * receives a SHOW STATUS query at an average interval of this many microseconds */ $wgDBAvgStatusPoll = 2000; /** Set to true if using InnoDB tables */ $wgDBtransactions = false; /** Set to true for compatibility with extensions that might be checking. * MySQL 3.23.x is no longer supported. */ $wgDBmysql4 = true; /** * Set to true to engage MySQL 4.1/5.0 charset-related features; * for now will just cause sending of 'SET NAMES=utf8' on connect. * * WARNING: THIS IS EXPERIMENTAL! * * May break if you're not using the table defs from mysql5/tables.sql. * May break if you're upgrading an existing wiki if set differently. * Broken symptoms likely to include incorrect behavior with page titles, * usernames, comments etc containing non-ASCII characters. * Might also cause failures on the object cache and other things. * * Even correct usage may cause failures with Unicode supplementary * characters (those not in the Basic Multilingual Plane) unless MySQL * has enhanced their Unicode support. */ $wgDBmysql5 = false; /** * Other wikis on this site, can be administered from a single developer * account. * Array numeric key => database name */ $wgLocalDatabases = array(); /** * If lag is higher than $wgSlaveLagWarning, show a warning in some special * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical, * show a more obvious warning. */ $wgSlaveLagWarning = 10; /** @see $wgSlaveLagWarning */ $wgSlaveLagCritical = 30; /** * Use old names for change_tags indices. */ $wgOldChangeTagsIndex = false; /**@}*/ # End of DB settings } /************************************************************************//** * @name Text storage * @{ */ /** * We can also compress text stored in the 'text' table. If this is set on, new * revisions will be compressed on page save if zlib support is available. Any * compressed revisions will be decompressed on load regardless of this setting * *but will not be readable at all* if zlib support is not available. */ $wgCompressRevisions = false; /** * External stores allow including content * from non database sources following URL links * * Short names of ExternalStore classes may be specified in an array here: * $wgExternalStores = array("http","file","custom")... * * CAUTION: Access to database might lead to code execution */ $wgExternalStores = false; /** * An array of external mysql servers, e.g. * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) ); * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class. */ $wgExternalServers = array(); /** * The place to put new revisions, false to put them in the local text table. * Part of a URL, e.g. DB://cluster1 * * Can be an array instead of a single string, to enable data distribution. Keys * must be consecutive integers, starting at zero. Example: * * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' ); * * @var array */ $wgDefaultExternalStore = false; /** * Revision text may be cached in $wgMemc to reduce load on external storage * servers and object extraction overhead for frequently-loaded revisions. * * Set to 0 to disable, or number of seconds before cache expiry. */ $wgRevisionCacheExpiry = 0; /** @} */ # end text storage } /************************************************************************//** * @name Performance hacks and limits * @{ */ /** Disable database-intensive features */ $wgMiserMode = false; /** Disable all query pages if miser mode is on, not just some */ $wgDisableQueryPages = false; /** Number of rows to cache in 'querycache' table when miser mode is on */ $wgQueryCacheLimit = 1000; /** Number of links to a page required before it is deemed "wanted" */ $wgWantedPagesThreshold = 1; /** Enable slow parser functions */ $wgAllowSlowParserFunctions = false; /** Allow schema updates */ $wgAllowSchemaUpdates = true; /** * Do DELETE/INSERT for link updates instead of incremental */ $wgUseDumbLinkUpdate = false; /** * Anti-lock flags - bitfield * - ALF_PRELOAD_LINKS: * Preload links during link update for save * - ALF_PRELOAD_EXISTENCE: * Preload cur_id during replaceLinkHolders * - ALF_NO_LINK_LOCK: * Don't use locking reads when updating the link table. This is * necessary for wikis with a high edit rate for performance * reasons, but may cause link table inconsistency * - ALF_NO_BLOCK_LOCK: * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic * wikis. */ $wgAntiLockFlags = 0; /** * Maximum article size in kilobytes */ $wgMaxArticleSize = 2048; /** * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to * raise PHP's memory limit if it's below this amount. */ $wgMemoryLimit = "50M"; /** @} */ # end performance hacks } /************************************************************************//** * @name Cache settings * @{ */ /** * Directory for caching data in the local filesystem. Should not be accessible * from the web. Set this to false to not use any local caches. * * Note: if multiple wikis share the same localisation cache directory, they * must all have the same set of extensions. You can set a directory just for * the localisation cache using $wgLocalisationCacheConf['storeDirectory']. */ $wgCacheDirectory = false; /** * Main cache type. This should be a cache with fast access, but it may have * limited space. By default, it is disabled, since the database is not fast * enough to make it worthwhile. * * The options are: * * - CACHE_ANYTHING: Use anything, as long as it works * - CACHE_NONE: Do not cache * - CACHE_DB: Store cache objects in the DB * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers * - CACHE_ACCEL: eAccelerator, APC, XCache or WinCache * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style * database. This is slow, and is not recommended for * anything other than debugging. * - (other): A string may be used which identifies a cache * configuration in $wgObjectCaches. * * @see $wgMessageCacheType, $wgParserCacheType */ $wgMainCacheType = CACHE_NONE; /** * The cache type for storing the contents of the MediaWiki namespace. This * cache is used for a small amount of data which is expensive to regenerate. * * For available types see $wgMainCacheType. */ $wgMessageCacheType = CACHE_ANYTHING; /** * The cache type for storing article HTML. This is used to store data which * is expensive to regenerate, and benefits from having plenty of storage space. * * For available types see $wgMainCacheType. */ $wgParserCacheType = CACHE_ANYTHING; /** * Advanced object cache configuration. * * Use this to define the class names and constructor parameters which are used * for the various cache types. Custom cache types may be defined here and * referenced from $wgMainCacheType, $wgMessageCacheType or $wgParserCacheType. * * The format is an associative array where the key is a cache identifier, and * the value is an associative array of parameters. The "class" parameter is the * class name which will be used. Alternatively, a "factory" parameter may be * given, giving a callable function which will generate a suitable cache object. * * The other parameters are dependent on the class used. * - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you * overrides that. */ $wgObjectCaches = array( CACHE_NONE => array( 'class' => 'EmptyBagOStuff' ), CACHE_DB => array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ), CACHE_DBA => array( 'class' => 'DBABagOStuff' ), CACHE_ANYTHING => array( 'factory' => 'ObjectCache::newAnything' ), CACHE_ACCEL => array( 'factory' => 'ObjectCache::newAccelerator' ), CACHE_MEMCACHED => array( 'factory' => 'ObjectCache::newMemcached' ), 'eaccelerator' => array( 'class' => 'eAccelBagOStuff' ), 'apc' => array( 'class' => 'APCBagOStuff' ), 'xcache' => array( 'class' => 'XCacheBagOStuff' ), 'wincache' => array( 'class' => 'WinCacheBagOStuff' ), 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ), 'hash' => array( 'class' => 'HashBagOStuff' ), ); /** * The expiry time for the parser cache, in seconds. The default is 86.4k * seconds, otherwise known as a day. */ $wgParserCacheExpireTime = 86400; /** * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend */ $wgDBAhandler = 'db3'; /** * Store sessions in MemCached. This can be useful to improve performance, or to * avoid the locking behaviour of PHP's default session handler, which tends to * prevent multiple requests for the same user from acting concurrently. */ $wgSessionsInMemcached = false; /** * This is used for setting php's session.save_handler. In practice, you will * almost never need to change this ever. Other options might be 'user' or * 'session_mysql.' Setting to null skips setting this entirely (which might be * useful if you're doing cross-application sessions, see bug 11381) */ $wgSessionHandler = null; /** If enabled, will send MemCached debugging information to $wgDebugLogFile */ $wgMemCachedDebug = false; /** The list of MemCached servers and port numbers */ $wgMemCachedServers = array( '127.0.0.1:11000' ); /** * Use persistent connections to MemCached, which are shared across multiple * requests. */ $wgMemCachedPersistent = false; /** * Read/write timeout for MemCached server communication, in microseconds. */ $wgMemCachedTimeout = 100000; /** * Set this to true to make a local copy of the message cache, for use in * addition to memcached. The files will be put in $wgCacheDirectory. */ $wgUseLocalMessageCache = false; /** * Defines format of local cache * true - Serialized object * false - PHP source file (Warning - security risk) */ $wgLocalMessageCacheSerialized = true; /** * Instead of caching everything, keep track which messages are requested and * load only most used messages. This only makes sense if there is lots of * interface messages customised in the wiki (like hundreds in many languages). */ $wgAdaptiveMessageCache = false; /** * Localisation cache configuration. Associative array with keys: * class: The class to use. May be overridden by extensions. * * store: The location to store cache data. May be 'files', 'db' or * 'detect'. If set to "files", data will be in CDB files. If set * to "db", data will be stored to the database. If set to * "detect", files will be used if $wgCacheDirectory is set, * otherwise the database will be used. * * storeClass: The class name for the underlying storage. If set to a class * name, it overrides the "store" setting. * * storeDirectory: If the store class puts its data in files, this is the * directory it will use. If this is false, $wgCacheDirectory * will be used. * * manualRecache: Set this to true to disable cache updates on web requests. * Use maintenance/rebuildLocalisationCache.php instead. */ $wgLocalisationCacheConf = array( 'class' => 'LocalisationCache', 'store' => 'detect', 'storeClass' => false, 'storeDirectory' => false, 'manualRecache' => false, ); /** Allow client-side caching of pages */ $wgCachePages = true; /** * Set this to current time to invalidate all prior cached pages. Affects both * client- and server-side caching. * You can get the current date on your server by using the command: * date +%Y%m%d%H%M%S */ $wgCacheEpoch = '20030516000000'; /** * Bump this number when changing the global style sheets and JavaScript. * It should be appended in the query string of static CSS and JS includes, * to ensure that client-side caches do not keep obsolete copies of global * styles. */ $wgStyleVersion = '303'; /** * This will cache static pages for non-logged-in users to reduce * database traffic on public sites. * Must set $wgShowIPinHeader = false */ $wgUseFileCache = false; /** * Directory where the cached page will be saved. * Defaults to "$wgCacheDirectory/html". */ $wgFileCacheDirectory = false; /** * Depth of the subdirectory hierarchy to be created under * $wgFileCacheDirectory. The subdirectories will be named based on * the MD5 hash of the title. A value of 0 means all cache files will * be put directly into the main file cache directory. */ $wgFileCacheDepth = 2; /** * Keep parsed pages in a cache (objectcache table or memcached) * to speed up output of the same page viewed by another user with the * same options. * * This can provide a significant speedup for medium to large pages, * so you probably want to keep it on. Extensions that conflict with the * parser cache should disable the cache on a per-page basis instead. */ $wgEnableParserCache = true; /** * Append a configured value to the parser cache and the sitenotice key so * that they can be kept separate for some class of activity. */ $wgRenderHashAppend = ''; /** * If on, the sidebar navigation links are cached for users with the * current language set. This can save a touch of load on a busy site * by shaving off extra message lookups. * * However it is also fragile: changing the site configuration, or * having a variable $wgArticlePath, can produce broken links that * don't update as expected. */ $wgEnableSidebarCache = false; /** * Expiry time for the sidebar cache, in seconds */ $wgSidebarCacheExpiry = 86400; /** * When using the file cache, we can store the cached HTML gzipped to save disk * space. Pages will then also be served compressed to clients that support it. * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in * the default LocalSettings.php! If you enable this, remove that setting first. * * Requires zlib support enabled in PHP. */ $wgUseGzip = false; /** * Whether MediaWiki should send an ETag header. Seems to cause * broken behavior with Squid 2.6, see bug 7098. */ $wgUseETag = false; /** Clock skew or the one-second resolution of time() can occasionally cause cache * problems when the user requests two pages within a short period of time. This * variable adds a given number of seconds to vulnerable timestamps, thereby giving * a grace period. */ $wgClockSkewFudge = 5; /** * Invalidate various caches when LocalSettings.php changes. This is equivalent * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as * was previously done in the default LocalSettings.php file. * * On high-traffic wikis, this should be set to false, to avoid the need to * check the file modification time, and to avoid the performance impact of * unnecessary cache invalidations. */ $wgInvalidateCacheOnLocalSettingsChange = true; /** @} */ # end of cache settings /************************************************************************//** * @name HTTP proxy (Squid) settings * * Many of these settings apply to any HTTP proxy used in front of MediaWiki, * although they are referred to as Squid settings for historical reasons. * * Achieving a high hit ratio with an HTTP proxy requires special * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for * more details. * * @{ */ /** * Enable/disable Squid. * See http://www.mediawiki.org/wiki/Manual:Squid_caching */ $wgUseSquid = false; /** If you run Squid3 with ESI support, enable this (default:false): */ $wgUseESI = false; /** Send X-Vary-Options header for better caching (requires patched Squid) */ $wgUseXVO = false; /** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API * requests and RSS/Atom feeds. Use this if you have an SSL termination setup * and need to split the cache between HTTP and HTTPS for API requests, * feed requests and HTTP redirect responses in order to prevent cache * pollution. This does not affect 'normal' requests to index.php other than * HTTP redirects. */ $wgVaryOnXFP = false; /** * Internal server name as known to Squid, if different. Example: * <code> * $wgInternalServer = 'http://yourinternal.tld:8000'; * </code> */ $wgInternalServer = false; /** * Cache timeout for the squid, will be sent as s-maxage (without ESI) or * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31 * days */ $wgSquidMaxage = 18000; /** * Default maximum age for raw CSS/JS accesses */ $wgForcedRawSMaxage = 300; /** * List of proxy servers to purge on changes; default port is 80. Use IP addresses. * * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For * headers sent/modified from these proxies when obtaining the remote IP address * * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge. */ $wgSquidServers = array(); /** * As above, except these servers aren't purged on page changes; use to set a * list of trusted proxies, etc. */ $wgSquidServersNoPurge = array(); /** Maximum number of titles to purge in any one client operation */ $wgMaxSquidPurgeTitles = 400; /** * HTCP multicast address. Set this to a multicast IP address to enable HTCP. * * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was * present in the earliest Squid implementations of the protocol. */ $wgHTCPMulticastAddress = false; /** * HTCP multicast port. * @see $wgHTCPMulticastAddress */ $wgHTCPPort = 4827; /** * HTCP multicast TTL. * @see $wgHTCPMulticastAddress */ $wgHTCPMulticastTTL = 1; /** Should forwarded Private IPs be accepted? */ $wgUsePrivateIPs = false; /** @} */ # end of HTTP proxy settings /************************************************************************//** * @name Language, regional and character encoding settings * @{ */ /** Site language code, should be one of ./languages/Language(.*).php */ $wgLanguageCode = 'en'; /** * Some languages need different word forms, usually for different cases. * Used in Language::convertGrammar(). Example: * * <code> * $wgGrammarForms['en']['genitive']['car'] = 'car\'s'; * </code> */ $wgGrammarForms = array(); /** Treat language links as magic connectors, not inline links */ $wgInterwikiMagic = true; /** Hide interlanguage links from the sidebar */ $wgHideInterlanguageLinks = false; /** List of language names or overrides for default names in Names.php */ $wgExtraLanguageNames = array(); /** * List of language codes that don't correspond to an actual language. * These codes are leftoffs from renames, or other legacy things. * Also, qqq is a dummy "language" for documenting messages. */ $wgDummyLanguageCodes = array( 'als', 'bat-smg', 'be-x-old', 'fiu-vro', 'iu', 'nb', 'qqq', 'qqx', 'roa-rup', 'simple', ); /** * Character set for use in the article edit box. Language-specific encodings * may be defined. * * This historic feature is one of the first that was added by former MediaWiki * team leader Brion Vibber, and is used to support the Esperanto x-system. */ $wgEditEncoding = ''; /** * Set this to true to replace Arabic presentation forms with their standard * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is * set to "ar". * * Note that pages with titles containing presentation forms will become * inaccessible, run maintenance/cleanupTitles.php to fix this. */ $wgFixArabicUnicode = true; /** * Set this to true to replace ZWJ-based chillu sequences in Malayalam text * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is * set to "ml". Note that some clients (even new clients as of 2010) do not * support these characters. * * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to * fix any ZWJ sequences in existing page titles. */ $wgFixMalayalamUnicode = true; /** * Set this to always convert certain Unicode sequences to modern ones * regardless of the content language. This has a small performance * impact. * * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion * details. * * @since 1.17 */ $wgAllUnicodeFixes = false; /** * Set this to eg 'ISO-8859-1' to perform character set conversion when * loading old revisions not marked with "utf-8" flag. Use this when * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the * burdensome mass conversion of old text data. * * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments, * user names, etc still must be converted en masse in the database before * continuing as a UTF-8 wiki. */ $wgLegacyEncoding = false; /** * Browser Blacklist for unicode non compliant browsers. Contains a list of * regexps : "/regexp/" matching problematic browsers. These browsers will * be served encoded unicode in the edit box instead of real unicode. */ $wgBrowserBlackList = array( /** * Netscape 2-4 detection * The minor version may contain strings such as "Gold" or "SGoldC-SGI" * Lots of non-netscape user agents have "compatible", so it's useful to check for that * with a negative assertion. The [UIN] identifier specifies the level of security * in a Netscape/Mozilla browser, checking for it rules out a number of fakers. * The language string is unreliable, it is missing on NS4 Mac. * * Reference: http://www.psychedelix.com/agents/index.shtml */ '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', /** * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH> * * Known useragents: * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC) * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC) * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC) * - [...] * * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864 * @link http://en.wikipedia.org/wiki/Template%3AOS9 */ '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/', /** * Google wireless transcoder, seems to eat a lot of chars alive * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361 */ '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/' ); /** * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will * create stub reference rows in the text table instead of copying * the full text of all current entries from 'cur' to 'text'. * * This will speed up the conversion step for large sites, but * requires that the cur table be kept around for those revisions * to remain viewable. * * maintenance/migrateCurStubs.php can be used to complete the * migration in the background once the wiki is back online. * * This option affects the updaters *only*. Any present cur stub * revisions will be readable at runtime regardless of this setting. */ $wgLegacySchemaConversion = false; /** * Enable to allow rewriting dates in page text. * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES. */ $wgUseDynamicDates = false; /** * Enable dates like 'May 12' instead of '12 May', this only takes effect if * the interface is set to English. */ $wgAmericanDates = false; /** * For Hindi and Arabic use local numerals instead of Western style (0-9) * numerals in interface. */ $wgTranslateNumerals = true; /** * Translation using MediaWiki: namespace. * Interface messages will be loaded from the database. */ $wgUseDatabaseMessages = true; /** * Expiry time for the message cache key */ $wgMsgCacheExpiry = 86400; /** * Maximum entry size in the message cache, in bytes */ $wgMaxMsgCacheEntrySize = 10000; /** Whether to enable language variant conversion. */ $wgDisableLangConversion = false; /** Whether to enable language variant conversion for links. */ $wgDisableTitleConversion = false; /** Whether to enable cononical language links in meta data. */ $wgCanonicalLanguageLinks = true; /** Default variant code, if false, the default will be the language code */ $wgDefaultLanguageVariant = false; /** * Disabled variants array of language variant conversion. Example: * <code> * $wgDisabledVariants[] = 'zh-mo'; * $wgDisabledVariants[] = 'zh-my'; * </code> * * or: * * <code> * $wgDisabledVariants = array('zh-mo', 'zh-my'); * </code> */ $wgDisabledVariants = array(); /** * Like $wgArticlePath, but on multi-variant wikis, this provides a * path format that describes which parts of the URL contain the * language variant. For Example: * * $wgLanguageCode = 'sr'; * $wgVariantArticlePath = '/$2/$1'; * $wgArticlePath = '/wiki/$1'; * * A link to /wiki/ would be redirected to /sr/Главна_страна * * It is important that $wgArticlePath not overlap with possible values * of $wgVariantArticlePath. */ $wgVariantArticlePath = false; /** * Show a bar of language selection links in the user login and user * registration forms; edit the "loginlanguagelinks" message to * customise these. */ $wgLoginLanguageSelector = false; /** * When translating messages with wfMsg(), it is not always clear what should * be considered UI messages and what should be content messages. * * For example, for the English Wikipedia, there should be only one 'mainpage', * so when getting the link for 'mainpage', we should treat it as site content * and call wfMsgForContent(), but for rendering the text of the link, we call * wfMsg(). The code behaves this way by default. However, sites like the * Wikimedia Commons do offer different versions of 'mainpage' and the like for * different languages. This array provides a way to override the default * behavior. For example, to allow language-specific main page and community * portal, set * * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' ); */ $wgForceUIMsgAsContentMsg = array(); /** * Fake out the timezone that the server thinks it's in. This will be used for * date display and not for what's stored in the DB. Leave to null to retain * your server's OS-based timezone value. * * This variable is currently used only for signature formatting and for local * time/date parser variables ({{LOCALTIME}} etc.) * * Timezones can be translated by editing MediaWiki messages of type * timezone-nameinlowercase like timezone-utc. * * Examples: * <code> * $wgLocaltimezone = 'GMT'; * $wgLocaltimezone = 'PST8PDT'; * $wgLocaltimezone = 'Europe/Sweden'; * $wgLocaltimezone = 'CET'; * </code> */ $wgLocaltimezone = null; /** * Set an offset from UTC in minutes to use for the default timezone setting * for anonymous users and new user accounts. * * This setting is used for most date/time displays in the software, and is * overrideable in user preferences. It is *not* used for signature timestamps. * * By default, this will be set to match $wgLocaltimezone. */ $wgLocalTZoffset = null; /** @} */ # End of language/charset settings /*************************************************************************//** * @name Output format and skin settings * @{ */ /** The default Content-Type header. */ $wgMimeType = 'text/html'; /** * The content type used in script tags. This is mostly going to be ignored if * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't * require a MIME type for JavaScript or CSS (those are the default script and * style languages). */ $wgJsMimeType = 'text/javascript'; /** * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html> * doesn't actually have a doctype part to put this variable's contents in. */ $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN'; /** * The URL of the document type declaration. Ignored if $wgHtml5 is true, * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part * to put this variable's contents in. */ $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'; /** * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served * as text/html) the attribute has no effect, so why bother? */ $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml'; /** * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional * instead, and disable HTML5 features. This may eventually be removed and set * to always true. If it's true, a number of other settings will be irrelevant * and have no effect. */ $wgHtml5 = true; /** * Defines the value of the version attribute in the <html> tag, if any. * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and * $wgHtml5 are both true, and this evaluates to boolean false (like if it's * left at the default null value), it will be auto-initialized to the correct * value for RDFa+HTML5. As such, you should have no reason to ever actually * set this to anything. */ $wgHtml5Version = null; /** * Enabled RDFa attributes for use in wikitext. * NOTE: Interaction with HTML5 is somewhat underspecified. */ $wgAllowRdfaAttributes = false; /** * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true. */ $wgAllowMicrodataAttributes = false; /** * Should we try to make our HTML output well-formed XML? If set to false, * output will be a few bytes shorter, and the HTML will arguably be more * readable. If set to true, life will be much easier for the authors of * screen-scraping bots, and the HTML will arguably be more readable. * * Setting this to false may omit quotation marks on some attributes, omit * slashes from some self-closing tags, omit some ending tags, etc., where * permitted by HTML5. Setting it to true will not guarantee that all pages * will be well-formed, although non-well-formed pages should be rare and it's * a bug if you find one. Conversely, setting it to false doesn't mean that * all XML-y constructs will be omitted, just that they might be. * * Because of compatibility with screen-scraping bots, and because it's * controversial, this is currently left to true by default. */ $wgWellFormedXml = true; /** * Permit other namespaces in addition to the w3.org default. * Use the prefix for the key and the namespace for the value. For * example: * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg'; * Normally we wouldn't have to define this in the root <html> * element, but IE needs it there in some circumstances. * * This is ignored if $wgHtml5 is true, for the same reason as * $wgXhtmlDefaultNamespace. */ $wgXhtmlNamespaces = array(); /** * Show IP address, for non-logged in users. It's necessary to switch this off * for some forms of caching. */ $wgShowIPinHeader = true; /** * Site notice shown at the top of each page * * MediaWiki:Sitenotice page, which will override this. You can also * provide a separate message for logged-out users using the * MediaWiki:Anonnotice page. */ $wgSiteNotice = ''; /** * A subtitle to add to the tagline, for skins that have it/ */ $wgExtraSubtitle = ''; /** * If this is set, a "donate" link will appear in the sidebar. Set it to a URL. */ $wgSiteSupportPage = ''; /** * Validate the overall output using tidy and refuse * to display the page if it's not valid. */ $wgValidateAllHtml = false; /** * Default skin, for new users and anonymous visitors. Registered users may * change this to any one of the other available skins in their preferences. * This has to be completely lowercase; see the "skins" directory for the list * of available skins. */ $wgDefaultSkin = 'vector'; /** * Specify the name of a skin that should not be presented in the list of * available skins. Use for blacklisting a skin which you do not want to * remove from the .../skins/ directory */ $wgSkipSkin = ''; /** Array for more like $wgSkipSkin. */ $wgSkipSkins = array(); /** * Optionally, we can specify a stylesheet to use for media="handheld". * This is recognized by some, but not all, handheld/mobile/PDA browsers. * If left empty, compliant handheld browsers won't pick up the skin * stylesheet, which is specified for 'screen' media. * * Can be a complete URL, base-relative path, or $wgStylePath-relative path. * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML. * * Will also be switched in when 'handheld=yes' is added to the URL, like * the 'printable=yes' mode for print media. */ $wgHandheldStyle = false; /** * If set, 'screen' and 'handheld' media specifiers for stylesheets are * transformed such that they apply to the iPhone/iPod Touch Mobile Safari, * which doesn't recognize 'handheld' but does support media queries on its * screen size. * * Consider only using this if you have a *really good* handheld stylesheet, * as iPhone users won't have any way to disable it and use the "grown-up" * styles instead. */ $wgHandheldForIPhone = false; /** * Allow user Javascript page? * This enables a lot of neat customizations, but may * increase security risk to users and server load. */ $wgAllowUserJs = false; /** * Allow user Cascading Style Sheets (CSS)? * This enables a lot of neat customizations, but may * increase security risk to users and server load. */ $wgAllowUserCss = false; /** * Allow user-preferences implemented in CSS? * This allows users to customise the site appearance to a greater * degree; disabling it will improve page load times. */ $wgAllowUserCssPrefs = true; /** Use the site's Javascript page? */ $wgUseSiteJs = true; /** Use the site's Cascading Style Sheets (CSS)? */ $wgUseSiteCss = true; /** * Set to false to disable application of access keys and tooltips, * eg to avoid keyboard conflicts with system keys or as a low-level * optimization. */ $wgEnableTooltipsAndAccesskeys = true; /** * Break out of framesets. This can be used to prevent clickjacking attacks, * or to prevent external sites from framing your site with ads. */ $wgBreakFrames = false; /** * The X-Frame-Options header to send on pages sensitive to clickjacking * attacks, such as edit pages. This prevents those pages from being displayed * in a frame or iframe. The options are: * * - 'DENY': Do not allow framing. This is recommended for most wikis. * * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used * to allow framing within a trusted domain. This is insecure if there * is a page on the same domain which allows framing of arbitrary URLs. * * - false: Allow all framing. This opens up the wiki to XSS attacks and thus * full compromise of local user accounts. Private wikis behind a * corporate firewall are especially vulnerable. This is not * recommended. * * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages, * not just edit pages. */ $wgEditPageFrameOptions = 'DENY'; /** * Disable output compression (enabled by default if zlib is available) */ $wgDisableOutputCompression = false; /** * Should we allow a broader set of characters in id attributes, per HTML5? If * not, use only HTML 4-compatible IDs. This option is for testing -- when the * functionality is ready, it will be on by default with no option. * * Currently this appears to work fine in all browsers, but it's disabled by * default because it normalizes id's a bit too aggressively, breaking preexisting * content (particularly Cite). See bug 27733, bug 27694, bug 27474. */ $wgExperimentalHtmlIds = false; /** * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code * You can add new icons to the built in copyright or poweredby, or you can create * a new block. Though note that you may need to add some custom css to get good styling * of new blocks in monobook. vector and modern should work without any special css. * * $wgFooterIcons itself is a key/value array. * The key is the name of a block that the icons will be wrapped in. The final id varies * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern * turns it into mw_poweredby. * The value is either key/value array of icons or a string. * In the key/value array the key may or may not be used by the skin but it can * be used to find the icon and unset it or change the icon if needed. * This is useful for disabling icons that are set by extensions. * The value should be either a string or an array. If it is a string it will be output * directly as html, however some skins may choose to ignore it. An array is the preferred format * for the icon, the following keys are used: * src: An absolute url to the image to use for the icon, this is recommended * but not required, however some skins will ignore icons without an image * url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted * alt: This is the text form of the icon, it will be displayed without an image in * skins like Modern or if src is not set, and will otherwise be used as * the alt="" for the image. This key is required. * width and height: If the icon specified by src is not of the standard size * you can specify the size of image to use with these keys. * Otherwise they will default to the standard 88x31. */ $wgFooterIcons = array( "copyright" => array( "copyright" => array(), // placeholder for the built in copyright icon ), "poweredby" => array( "mediawiki" => array( "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png" "url" => "http://www.mediawiki.org/", "alt" => "Powered by MediaWiki", ) ), ); /** * Login / create account link behavior when it's possible for anonymous users to create an account * true = use a combined login / create account link * false = split login and create account into two separate links */ $wgUseCombinedLoginLink = true; /** * Search form behavior for Vector skin only * true = use an icon search button * false = use Go & Search buttons */ $wgVectorUseSimpleSearch = false; /** * Watch and unwatch as an icon rather than a link for Vector skin only * true = use an icon watch/unwatch button * false = use watch/unwatch text link */ $wgVectorUseIconWatch = false; /** * Show the name of the current variant as a label in the variants drop-down menu */ $wgVectorShowVariantName = false; /** * Display user edit counts in various prominent places. */ $wgEdititis = false; /** * Better directionality support (bug 6100 and related). * Removed in 1.18, still kept here for LiquidThreads backwards compatibility. * * @deprecated since 1.18 */ $wgBetterDirectionality = true; /** @} */ # End of output format settings } /*************************************************************************//** * @name Resource loader settings * @{ */ /** * Client-side resource modules. Extensions should add their module definitions * here. * * Example: * $wgResourceModules['ext.myExtension'] = array( * 'scripts' => 'myExtension.js', * 'styles' => 'myExtension.css', * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ), * 'localBasePath' => dirname( __FILE__ ), * 'remoteExtPath' => 'MyExtension', * ); */ $wgResourceModules = array(); /* * Default 'remoteBasePath' value for resource loader modules. * If not set, then $wgScriptPath will be used as a fallback. */ $wgResourceBasePath = null; /** * Maximum time in seconds to cache resources served by the resource loader */ $wgResourceLoaderMaxage = array( 'versioned' => array( // Squid/Varnish but also any other public proxy cache between the client and MediaWiki 'server' => 30 * 24 * 60 * 60, // 30 days // On the client side (e.g. in the browser cache). 'client' => 30 * 24 * 60 * 60, // 30 days ), 'unversioned' => array( 'server' => 5 * 60, // 5 minutes 'client' => 5 * 60, // 5 minutes ), ); /** * The default debug mode (on/off) for of ResourceLoader requests. This will still * be overridden when the debug URL parameter is used. */ $wgResourceLoaderDebug = false; /** * Enable embedding of certain resources using Edge Side Includes. This will * improve performance but only works if there is something in front of the * web server (e..g a Squid or Varnish server) configured to process the ESI. */ $wgResourceLoaderUseESI = false; /** * Put each statement on its own line when minifying JavaScript. This makes * debugging in non-debug mode a bit easier. */ $wgResourceLoaderMinifierStatementsOnOwnLine = false; /** * Maximum line length when minifying JavaScript. This is not a hard maximum: * the minifier will try not to produce lines longer than this, but may be * forced to do so in certain cases. */ $wgResourceLoaderMinifierMaxLineLength = 1000; /** * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its * dependencies */ $wgIncludeLegacyJavaScript = true; /** * Whether or not to assing configuration variables to the global window object. * If this is set to false, old code using deprecated variables like: * " if ( window.wgRestrictionEdit ) ..." * or: * " if ( wgIsArticle ) ..." * will no longer work and needs to use mw.config instead. For example: * " if ( mw.config.exists('wgRestrictionEdit') )" * or * " if ( mw.config.get('wgIsArticle') )". */ $wgLegacyJavaScriptGlobals = true; /** * If set to a positive number, ResourceLoader will not generate URLs whose * query string is more than this many characters long, and will instead use * multiple requests with shorter query strings. This degrades performance, * but may be needed if your web server has a low (less than, say 1024) * query string length limit or a low value for suhosin.get.max_value_length * that you can't increase. * * If set to a negative number, ResourceLoader will assume there is no query * string length limit. */ $wgResourceLoaderMaxQueryLength = -1; /** * If set to true, JavaScript modules loaded from wiki pages will be parsed prior * to minification to validate it. * * Parse errors will result in a JS exception being thrown during module load, * which avoids breaking other modules loaded in the same request. */ $wgResourceLoaderValidateJS = true; /** * If set to true, statically-sourced (file-backed) JavaScript resources will * be parsed for validity before being bundled up into ResourceLoader modules. * * This can be helpful for development by providing better error messages in * default (non-debug) mode, but JavaScript parsing is slow and memory hungry * and may fail on large pre-bundled frameworks. */ $wgResourceLoaderValidateStaticJS = false; /** @} */ # End of resource loader settings } /*************************************************************************//** * @name Page title and interwiki link settings * @{ */ /** * Name of the project namespace. If left set to false, $wgSitename will be * used instead. */ $wgMetaNamespace = false; /** * Name of the project talk namespace. * * Normally you can ignore this and it will be something like * $wgMetaNamespace . "_talk". In some languages, you may want to set this * manually for grammatical reasons. */ $wgMetaNamespaceTalk = false; /** * Additional namespaces. If the namespaces defined in Language.php and * Namespace.php are insufficient, you can create new ones here, for example, * to import Help files in other languages. You can also override the namespace * names of existing namespaces. Extensions developers should use * $wgCanonicalNamespaceNames. * * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will * no longer be accessible. If you rename it, then you can access them through * the new namespace name. * * Custom namespaces should start at 100 to avoid conflicting with standard * namespaces, and should always follow the even/odd main/talk pattern. */ #$wgExtraNamespaces = # array(100 => "Hilfe", # 101 => "Hilfe_Diskussion", # 102 => "Aide", # 103 => "Discussion_Aide" # ); $wgExtraNamespaces = array(); /** * Same as above, but for namespaces with gender distinction. * Note: the default form for the namespace should also be set * using $wgExtraNamespaces for the same index. * @since 1.18 */ $wgExtraGenderNamespaces = array(); /** * Namespace aliases * These are alternate names for the primary localised namespace names, which * are defined by $wgExtraNamespaces and the language file. If a page is * requested with such a prefix, the request will be redirected to the primary * name. * * Set this to a map from namespace names to IDs. * Example: * $wgNamespaceAliases = array( * 'Wikipedian' => NS_USER, * 'Help' => 100, * ); */ $wgNamespaceAliases = array(); /** * Allowed title characters -- regex character class * Don't change this unless you know what you're doing * * Problematic punctuation: * - []{}|# Are needed for link syntax, never enable these * - <> Causes problems with HTML escaping, don't use * - % Enabled by default, minor problems with path to query rewrite rules, see below * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites * * All three of these punctuation problems can be avoided by using an alias, instead of a * rewrite rule of either variety. * * The problem with % is that when using a path to query rewrite rule, URLs are * double-unescaped: once by Apache's path conversion code, and again by PHP. So * %253F, for example, becomes "?". Our code does not double-escape to compensate * for this, indeed double escaping would break if the double-escaped title was * passed in the query string rather than the path. This is a minor security issue * because articles can be created such that they are hard to view or edit. * * In some rare cases you may wish to remove + for compatibility with old links. * * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but * this breaks interlanguage links */ $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+"; /** * The interwiki prefix of the current wiki, or false if it doesn't have one. */ $wgLocalInterwiki = false; /** * Expiry time for cache of interwiki table */ $wgInterwikiExpiry = 10800; /** Interwiki caching settings. $wgInterwikiCache specifies path to constant database file This cdb database is generated by dumpInterwiki from maintenance and has such key formats: dbname:key - a simple key (e.g. enwiki:meta) _sitename:key - site-scope key (e.g. wiktionary:meta) __global:key - global-scope key (e.g. __global:meta) __sites:dbname - site mapping (e.g. __sites:enwiki) Sites mapping just specifies site name, other keys provide "local url" data layout. $wgInterwikiScopes specify number of domains to check for messages: 1 - Just wiki(db)-level 2 - wiki and global levels 3 - site levels $wgInterwikiFallbackSite - if unable to resolve from cache */ $wgInterwikiCache = false; $wgInterwikiScopes = 3; $wgInterwikiFallbackSite = 'wiki'; /** * If local interwikis are set up which allow redirects, * set this regexp to restrict URLs which will be displayed * as 'redirected from' links. * * It might look something like this: * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!'; * * Leave at false to avoid displaying any incoming redirect markers. * This does not affect intra-wiki redirects, which don't change * the URL. */ $wgRedirectSources = false; /** * Set this to false to avoid forcing the first letter of links to capitals. * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links * appearing with a capital at the beginning of a sentence will *not* go to the * same place as links in the middle of a sentence using a lowercase initial. */ $wgCapitalLinks = true; /** * @since 1.16 - This can now be set per-namespace. Some special namespaces (such * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be * true by default (and setting them has no effect), due to various things that * require them to be so. Also, since Talk namespaces need to directly mirror their * associated content namespaces, the values for those are ignored in favor of the * subject namespace's setting. Setting for NS_MEDIA is taken automatically from * NS_FILE. * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false; */ $wgCapitalLinkOverrides = array(); /** Which namespaces should support subpages? * See Language.php for a list of namespaces. */ $wgNamespacesWithSubpages = array( NS_TALK => true, NS_USER => true, NS_USER_TALK => true, NS_PROJECT_TALK => true, NS_FILE_TALK => true, NS_MEDIAWIKI => true, NS_MEDIAWIKI_TALK => true, NS_TEMPLATE_TALK => true, NS_HELP_TALK => true, NS_CATEGORY_TALK => true ); /** * Array of namespaces which can be deemed to contain valid "content", as far * as the site statistics are concerned. Useful if additional namespaces also * contain "content" which should be considered when generating a count of the * number of articles in the wiki. */ $wgContentNamespaces = array( NS_MAIN ); /** * Max number of redirects to follow when resolving redirects. * 1 means only the first redirect is followed (default behavior). * 0 or less means no redirects are followed. */ $wgMaxRedirects = 1; /** * Array of invalid page redirect targets. * Attempting to create a redirect to any of the pages in this array * will make the redirect fail. * Userlogout is hard-coded, so it does not need to be listed here. * (bug 10569) Disallow Mypage and Mytalk as well. * * As of now, this only checks special pages. Redirects to pages in * other namespaces cannot be invalidated by this variable. */ $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' ); /** @} */ # End of title and interwiki settings } /************************************************************************//** * @name Parser settings * These settings configure the transformation from wikitext to HTML. * @{ */ /** * Parser configuration. Associative array with the following members: * * class The class name * * preprocessorClass The preprocessor class. Two classes are currently available: * Preprocessor_Hash, which uses plain PHP arrays for tempoarary * storage, and Preprocessor_DOM, which uses the DOM module for * temporary storage. Preprocessor_DOM generally uses less memory; * the speed of the two is roughly the same. * * If this parameter is not given, it uses Preprocessor_DOM if the * DOM module is available, otherwise it uses Preprocessor_Hash. * * The entire associative array will be passed through to the constructor as * the first parameter. Note that only Setup.php can use this variable -- * the configuration will change at runtime via $wgParser member functions, so * the contents of this variable will be out-of-date. The variable can only be * changed during LocalSettings.php, in particular, it can't be changed during * an extension setup function. */ $wgParserConf = array( 'class' => 'Parser', #'preprocessorClass' => 'Preprocessor_Hash', ); /** Maximum indent level of toc. */ $wgMaxTocLevel = 999; /** * A complexity limit on template expansion */ $wgMaxPPNodeCount = 1000000; /** * Maximum recursion depth for templates within templates. * The current parser adds two levels to the PHP call stack for each template, * and xdebug limits the call stack to 100 by default. So this should hopefully * stop the parser before it hits the xdebug limit. */ $wgMaxTemplateDepth = 40; /** @see $wgMaxTemplateDepth */ $wgMaxPPExpandDepth = 40; /** The external URL protocols */ $wgUrlProtocols = array( 'http://', 'https://', 'ftp://', 'irc://', 'ircs://', // @bug 28503 'gopher://', 'telnet://', // Well if we're going to support the above.. -ævar 'nntp://', // @bug 3808 RFC 1738 'worldwind://', 'mailto:', 'news:', 'svn://', 'git://', 'mms://', '//', // for protocol-relative URLs ); /** * If true, removes (substitutes) templates in "~~~~" signatures. */ $wgCleanSignatures = true; /** Whether to allow inline image pointing to other websites */ $wgAllowExternalImages = false; /** * If the above is false, you can specify an exception here. Image URLs * that start with this string are then rendered, while all others are not. * You can use this to set up a trusted, simple repository of images. * You may also specify an array of strings to allow multiple sites * * Examples: * <code> * $wgAllowExternalImagesFrom = 'http://127.0.0.1/'; * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' ); * </code> */ $wgAllowExternalImagesFrom = ''; /** If $wgAllowExternalImages is false, you can allow an on-wiki * whitelist of regular expression fragments to match the image URL * against. If the image matches one of the regular expression fragments, * The image will be displayed. * * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist) * Or false to disable it */ $wgEnableImageWhitelist = true; /** * A different approach to the above: simply allow the <img> tag to be used. * This allows you to specify alt text and other attributes, copy-paste HTML to * your wiki more easily, etc. However, allowing external images in any manner * will allow anyone with editing rights to snoop on your visitors' IP * addresses and so forth, if they wanted to, by inserting links to images on * sites they control. */ $wgAllowImageTag = false; /** * $wgUseTidy: use tidy to make sure HTML output is sane. * Tidy is a free tool that fixes broken HTML. * See http://www.w3.org/People/Raggett/tidy/ * * - $wgTidyBin should be set to the path of the binary and * - $wgTidyConf to the path of the configuration file. * - $wgTidyOpts can include any number of parameters. * - $wgTidyInternal controls the use of the PECL extension or the * libtidy (PHP >= 5) extension to use an in-process tidy library instead * of spawning a separate program. * Normally you shouldn't need to override the setting except for * debugging. To install, use 'pear install tidy' and add a line * 'extension=tidy.so' to php.ini. */ $wgUseTidy = false; /** @see $wgUseTidy */ $wgAlwaysUseTidy = false; /** @see $wgUseTidy */ $wgTidyBin = 'tidy'; /** @see $wgUseTidy */ $wgTidyConf = $IP.'/includes/tidy.conf'; /** @see $wgUseTidy */ $wgTidyOpts = ''; /** @see $wgUseTidy */ $wgTidyInternal = extension_loaded( 'tidy' ); /** * Put tidy warnings in HTML comments * Only works for internal tidy. */ $wgDebugTidy = false; /** Allow raw, unchecked HTML in <html>...</html> sections. * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions * TO RESTRICT EDITING to only those that you trust */ $wgRawHtml = false; /** * Set a default target for external links, e.g. _blank to pop up a new window */ $wgExternalLinkTarget = false; /** * If true, external URL links in wiki text will be given the * rel="nofollow" attribute as a hint to search engines that * they should not be followed for ranking purposes as they * are user-supplied and thus subject to spamming. */ $wgNoFollowLinks = true; /** * Namespaces in which $wgNoFollowLinks doesn't apply. * See Language.php for a list of namespaces. */ $wgNoFollowNsExceptions = array(); /** * If this is set to an array of domains, external links to these domain names * (or any subdomains) will not be set to rel="nofollow" regardless of the * value of $wgNoFollowLinks. For instance: * * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' ); * * This would add rel="nofollow" to links to de.wikipedia.org, but not * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org, * etc. */ $wgNoFollowDomainExceptions = array(); /** * Allow DISPLAYTITLE to change title display */ $wgAllowDisplayTitle = true; /** * For consistency, restrict DISPLAYTITLE to titles that normalize to the same * canonical DB key. */ $wgRestrictDisplayTitle = true; /** * Maximum number of calls per parse to expensive parser functions such as * PAGESINCATEGORY. */ $wgExpensiveParserFunctionLimit = 100; /** * Preprocessor caching threshold * Setting it to 'false' will disable the preprocessor cache. */ $wgPreprocessorCacheThreshold = 1000; /** * Enable interwiki transcluding. Only when iw_trans=1. */ $wgEnableScaryTranscluding = false; /** * Expiry time for interwiki transclusion */ $wgTranscludeCacheExpiry = 3600; /** @} */ # end of parser settings } /************************************************************************//** * @name Statistics * @{ */ /** * Method used to determine if a page in a content namespace should be counted * as a valid article. * * Redirect pages will never be counted as valid articles. * * This variable can have the following values: * - 'any': all pages as considered as valid articles * - 'comma': the page must contain a comma to be considered valid * - 'link': the page must contain a [[wiki link]] to be considered valid * - null: the value will be set at run time depending on $wgUseCommaCount: * if $wgUseCommaCount is false, it will be 'link', if it is true * it will be 'comma' * * See also See http://www.mediawiki.org/wiki/Manual:Article_count * * Retroactively changing this variable will not affect the existing count, * to update it, you will need to run the maintenance/updateArticleCount.php * script. */ $wgArticleCountMethod = null; /** * Backward compatibility setting, will set $wgArticleCountMethod if it is null. * @deprecated since 1.18; use $wgArticleCountMethod instead */ $wgUseCommaCount = false; /** * wgHitcounterUpdateFreq sets how often page counters should be updated, higher * values are easier on the database. A value of 1 causes the counters to be * updated on every hit, any higher value n cause them to update *on average* * every n hits. Should be set to either 1 or something largish, eg 1000, for * maximum efficiency. */ $wgHitcounterUpdateFreq = 1; /** * How many days user must be idle before he is considered inactive. Will affect * the number shown on Special:Statistics and Special:ActiveUsers special page. * You might want to leave this as the default value, to provide comparable * numbers between different wikis. */ $wgActiveUserDays = 30; /** @} */ # End of statistics } /************************************************************************//** * @name User accounts, authentication * @{ */ /** For compatibility with old installations set to false */ $wgPasswordSalt = true; /** * Specifies the minimal length of a user password. If set to 0, empty pass- * words are allowed. */ $wgMinimalPasswordLength = 1; /** * Whether to allow password resets ("enter some identifying data, and we'll send an email * with a temporary password you can use to get back into the account") identified by * various bits of data. Setting all of these to false (or the whole variable to false) * has the effect of disabling password resets entirely */ $wgPasswordResetRoutes = array( 'username' => true, 'email' => false, ); /** * Maximum number of Unicode characters in signature */ $wgMaxSigChars = 255; /** * Maximum number of bytes in username. You want to run the maintenance * script ./maintenance/checkUsernames.php once you have changed this value. */ $wgMaxNameChars = 255; /** * Array of usernames which may not be registered or logged in from * Maintenance scripts can still use these */ $wgReservedUsernames = array( 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages 'Conversion script', // Used for the old Wikipedia software upgrade 'Maintenance script', // Maintenance scripts which perform editing, image import script 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade 'msg:double-redirect-fixer', // Automatic double redirect fix 'msg:usermessage-editor', // Default user for leaving user messages 'msg:proxyblocker', // For Special:Blockme ); /** * Settings added to this array will override the default globals for the user * preferences used by anonymous visitors and newly created accounts. * For instance, to disable section editing links: * $wgDefaultUserOptions ['editsection'] = 0; * */ $wgDefaultUserOptions = array( 'ccmeonemails' => 0, 'cols' => 80, 'date' => 'default', 'diffonly' => 0, 'disablemail' => 0, 'disablesuggest' => 0, 'editfont' => 'default', 'editondblclick' => 0, 'editsection' => 1, 'editsectiononrightclick' => 0, 'enotifminoredits' => 0, 'enotifrevealaddr' => 0, 'enotifusertalkpages' => 1, 'enotifwatchlistpages' => 0, 'extendwatchlist' => 0, 'externaldiff' => 0, 'externaleditor' => 0, 'fancysig' => 0, 'forceeditsummary' => 0, 'gender' => 'unknown', 'hideminor' => 0, 'hidepatrolled' => 0, 'highlightbroken' => 1, 'imagesize' => 2, 'justify' => 0, 'math' => 1, 'minordefault' => 0, 'newpageshidepatrolled' => 0, 'nocache' => 0, 'noconvertlink' => 0, 'norollbackdiff' => 0, 'numberheadings' => 0, 'previewonfirst' => 0, 'previewontop' => 1, 'quickbar' => 5, 'rcdays' => 7, 'rclimit' => 50, 'rememberpassword' => 0, 'rows' => 25, 'searchlimit' => 20, 'showhiddencats' => 0, 'showjumplinks' => 1, 'shownumberswatching' => 1, 'showtoc' => 1, 'showtoolbar' => 1, 'skin' => false, 'stubthreshold' => 0, 'thumbsize' => 2, 'underline' => 2, 'uselivepreview' => 0, 'usenewrc' => 0, 'watchcreations' => 0, 'watchdefault' => 0, 'watchdeletion' => 0, 'watchlistdays' => 3.0, 'watchlisthideanons' => 0, 'watchlisthidebots' => 0, 'watchlisthideliu' => 0, 'watchlisthideminor' => 0, 'watchlisthideown' => 0, 'watchlisthidepatrolled' => 0, 'watchmoves' => 0, 'wllimit' => 250, ); /** * Whether or not to allow and use real name fields. * @deprecated since 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real * names */ $wgAllowRealName = true; /** An array of preferences to not show for the user */ $wgHiddenPrefs = array(); /** * Characters to prevent during new account creations. * This is used in a regular expression character class during * registration (regex metacharacters like / are escaped). */ $wgInvalidUsernameCharacters = '@'; /** * Character used as a delimiter when testing for interwiki userrights * (In Special:UserRights, it is possible to modify users on different * databases if the delimiter is used, e.g. Someuser@enwiki). * * It is recommended that you have this delimiter in * $wgInvalidUsernameCharacters above, or you will not be able to * modify the user rights of those users via Special:UserRights */ $wgUserrightsInterwikiDelimiter = '@'; /** * Use some particular type of external authentication. The specific * authentication module you use will normally require some extra settings to * be specified. * * null indicates no external authentication is to be used. Otherwise, * $wgExternalAuthType must be the name of a non-abstract class that extends * ExternalUser. * * Core authentication modules can be found in includes/extauth/. */ $wgExternalAuthType = null; /** * Configuration for the external authentication. This may include arbitrary * keys that depend on the authentication mechanism. For instance, * authentication against another web app might require that the database login * info be provided. Check the file where your auth mechanism is defined for * info on what to put here. */ $wgExternalAuthConf = array(); /** * When should we automatically create local accounts when external accounts * already exist, if using ExternalAuth? Can have three values: 'never', * 'login', 'view'. 'view' requires the external database to support cookies, * and implies 'login'. * * TODO: Implement 'view' (currently behaves like 'login'). */ $wgAutocreatePolicy = 'login'; /** * Policies for how each preference is allowed to be changed, in the presence * of external authentication. The keys are preference keys, e.g., 'password' * or 'emailaddress' (see Preferences.php et al.). The value can be one of the * following: * * - local: Allow changes to this pref through the wiki interface but only * apply them locally (default). * - semiglobal: Allow changes through the wiki interface and try to apply them * to the foreign database, but continue on anyway if that fails. * - global: Allow changes through the wiki interface, but only let them go * through if they successfully update the foreign database. * - message: Allow no local changes for linked accounts; replace the change * form with a message provided by the auth plugin, telling the user how to * change the setting externally (maybe providing a link, etc.). If the auth * plugin provides no message for this preference, hide it entirely. * * Accounts that are not linked to an external account are never affected by * this setting. You may want to look at $wgHiddenPrefs instead. * $wgHiddenPrefs supersedes this option. * * TODO: Implement message, global. */ $wgAllowPrefChange = array(); /** * This is to let user authenticate using https when they come from http. * Based on an idea by George Herbert on wikitech-l: * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html * @since 1.17 */ $wgSecureLogin = false; /** @} */ # end user accounts } /************************************************************************//** * @name User rights, access control and monitoring * @{ */ /** * Number of seconds before autoblock entries expire. Default 86400 = 1 day. */ $wgAutoblockExpiry = 86400; /** * Set this to true to allow blocked users to edit their own user talk page. */ $wgBlockAllowsUTEdit = false; /** Allow sysops to ban users from accessing Emailuser */ $wgSysopEmailBans = true; /** * Limits on the possible sizes of range blocks. * * CIDR notation is hard to understand, it's easy to mistakenly assume that a * /1 is a small range and a /31 is a large range. Setting this to half the * number of bits avoids such errors. */ $wgBlockCIDRLimit = array( 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses ); /** * If true, blocked users will not be allowed to login. When using this with * a public wiki, the effect of logging out blocked users may actually be * avers: unless the user's address is also blocked (e.g. auto-block), * logging the user out will again allow reading and editing, just as for * anonymous visitors. */ $wgBlockDisablesLogin = false; /** * Pages anonymous user may see as an array, e.g. * * <code> * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help"); * </code> * * Special:Userlogin and Special:ChangePassword are always whitelisted. * * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false -- * see below. Otherwise, ALL pages are accessible, regardless of this setting. * * Also note that this will only protect _pages in the wiki_. Uploaded files * will remain readable. You can use img_auth.php to protect uploaded files, * see http://www.mediawiki.org/wiki/Manual:Image_Authorization */ $wgWhitelistRead = false; /** * Should editors be required to have a validated e-mail * address before being allowed to edit? */ $wgEmailConfirmToEdit = false; /** * Permission keys given to users in each group. * All users are implicitly in the '*' group including anonymous visitors; * logged-in users are all implicitly in the 'user' group. These will be * combined with the permissions of all groups that a given user is listed * in in the user_groups table. * * Note: Don't set $wgGroupPermissions = array(); unless you know what you're * doing! This will wipe all permissions, and may mean that your users are * unable to perform certain essential tasks or access new functionality * when new permissions are introduced and default grants established. * * Functionality to make pages inaccessible has not been extensively tested * for security. Use at your own risk! * * This replaces wgWhitelistAccount and wgWhitelistEdit */ $wgGroupPermissions = array(); /** @cond file_level_code */ // Implicit group for all visitors $wgGroupPermissions['*']['createaccount'] = true; $wgGroupPermissions['*']['read'] = true; $wgGroupPermissions['*']['edit'] = true; $wgGroupPermissions['*']['createpage'] = true; $wgGroupPermissions['*']['createtalk'] = true; $wgGroupPermissions['*']['writeapi'] = true; //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled // Implicit group for all logged-in accounts $wgGroupPermissions['user']['move'] = true; $wgGroupPermissions['user']['move-subpages'] = true; $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns $wgGroupPermissions['user']['read'] = true; $wgGroupPermissions['user']['edit'] = true; $wgGroupPermissions['user']['createpage'] = true; $wgGroupPermissions['user']['createtalk'] = true; $wgGroupPermissions['user']['writeapi'] = true; $wgGroupPermissions['user']['upload'] = true; $wgGroupPermissions['user']['reupload'] = true; $wgGroupPermissions['user']['reupload-shared'] = true; $wgGroupPermissions['user']['minoredit'] = true; $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok" $wgGroupPermissions['user']['sendemail'] = true; // Implicit group for accounts that pass $wgAutoConfirmAge $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true; // Users with bot privilege can have their edits hidden // from various log pages by default $wgGroupPermissions['bot']['bot'] = true; $wgGroupPermissions['bot']['autoconfirmed'] = true; $wgGroupPermissions['bot']['nominornewtalk'] = true; $wgGroupPermissions['bot']['autopatrol'] = true; $wgGroupPermissions['bot']['suppressredirect'] = true; $wgGroupPermissions['bot']['apihighlimits'] = true; $wgGroupPermissions['bot']['writeapi'] = true; #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled // Most extra permission abilities go to this group $wgGroupPermissions['sysop']['block'] = true; $wgGroupPermissions['sysop']['createaccount'] = true; $wgGroupPermissions['sysop']['delete'] = true; $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text $wgGroupPermissions['sysop']['undelete'] = true; $wgGroupPermissions['sysop']['editinterface'] = true; $wgGroupPermissions['sysop']['editusercss'] = true; $wgGroupPermissions['sysop']['edituserjs'] = true; $wgGroupPermissions['sysop']['import'] = true; $wgGroupPermissions['sysop']['importupload'] = true; $wgGroupPermissions['sysop']['move'] = true; $wgGroupPermissions['sysop']['move-subpages'] = true; $wgGroupPermissions['sysop']['move-rootuserpages'] = true; $wgGroupPermissions['sysop']['patrol'] = true; $wgGroupPermissions['sysop']['autopatrol'] = true; $wgGroupPermissions['sysop']['protect'] = true; $wgGroupPermissions['sysop']['proxyunbannable'] = true; $wgGroupPermissions['sysop']['rollback'] = true; $wgGroupPermissions['sysop']['upload'] = true; $wgGroupPermissions['sysop']['reupload'] = true; $wgGroupPermissions['sysop']['reupload-shared'] = true; $wgGroupPermissions['sysop']['unwatchedpages'] = true; $wgGroupPermissions['sysop']['autoconfirmed'] = true; $wgGroupPermissions['sysop']['upload_by_url'] = true; $wgGroupPermissions['sysop']['ipblock-exempt'] = true; $wgGroupPermissions['sysop']['blockemail'] = true; $wgGroupPermissions['sysop']['markbotedits'] = true; $wgGroupPermissions['sysop']['apihighlimits'] = true; $wgGroupPermissions['sysop']['browsearchive'] = true; $wgGroupPermissions['sysop']['noratelimit'] = true; $wgGroupPermissions['sysop']['movefile'] = true; $wgGroupPermissions['sysop']['unblockself'] = true; $wgGroupPermissions['sysop']['suppressredirect'] = true; #$wgGroupPermissions['sysop']['mergehistory'] = true; #$wgGroupPermissions['sysop']['trackback'] = true; // Permission to change users' group assignments $wgGroupPermissions['bureaucrat']['userrights'] = true; $wgGroupPermissions['bureaucrat']['noratelimit'] = true; // Permission to change users' groups assignments across wikis #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true; // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true; #$wgGroupPermissions['sysop']['deleterevision'] = true; // To hide usernames from users and Sysops #$wgGroupPermissions['suppress']['hideuser'] = true; // To hide revisions/log items from users and Sysops #$wgGroupPermissions['suppress']['suppressrevision'] = true; // For private suppression log access #$wgGroupPermissions['suppress']['suppressionlog'] = true; /** * The developer group is deprecated, but can be activated if need be * to use the 'lockdb' and 'unlockdb' special pages. Those require * that a lock file be defined and creatable/removable by the web * server. */ # $wgGroupPermissions['developer']['siteadmin'] = true; /** @endcond */ /** * Permission keys revoked from users in each group. * This acts the same way as wgGroupPermissions above, except that * if the user is in a group here, the permission will be removed from them. * * Improperly setting this could mean that your users will be unable to perform * certain essential tasks, so use at your own risk! */ $wgRevokePermissions = array(); /** * Implicit groups, aren't shown on Special:Listusers or somewhere else */ $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' ); /** * A map of group names that the user is in, to group names that those users * are allowed to add or revoke. * * Setting the list of groups to add or revoke to true is equivalent to "any group". * * For example, to allow sysops to add themselves to the "bot" group: * * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) ); * * Implicit groups may be used for the source group, for instance: * * $wgGroupsRemoveFromSelf = array( '*' => true ); * * This allows users in the '*' group (i.e. any user) to remove themselves from * any group that they happen to be in. * */ $wgGroupsAddToSelf = array(); /** @see $wgGroupsAddToSelf */ $wgGroupsRemoveFromSelf = array(); /** * Set of available actions that can be restricted via action=protect * You probably shouldn't change this. * Translated through restriction-* messages. * Title::getRestrictionTypes() will remove restrictions that are not * applicable to a specific title (create and upload) */ $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' ); /** * Rights which can be required for each protection level (via action=protect) * * You can add a new protection level that requires a specific * permission by manipulating this array. The ordering of elements * dictates the order on the protection form's lists. * * - '' will be ignored (i.e. unprotected) * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility */ $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' ); /** * Set the minimum permissions required to edit pages in each * namespace. If you list more than one permission, a user must * have all of them to edit pages in that namespace. * * Note: NS_MEDIAWIKI is implicitly restricted to editinterface. */ $wgNamespaceProtection = array(); /** * Pages in namespaces in this array can not be used as templates. * Elements must be numeric namespace ids. * Among other things, this may be useful to enforce read-restrictions * which may otherwise be bypassed by using the template machanism. */ $wgNonincludableNamespaces = array(); /** * Number of seconds an account is required to age before it's given the * implicit 'autoconfirm' group membership. This can be used to limit * privileges of new accounts. * * Accounts created by earlier versions of the software may not have a * recorded creation date, and will always be considered to pass the age test. * * When left at 0, all registered accounts will pass. * * Example: * <code> * $wgAutoConfirmAge = 600; // ten minutes * $wgAutoConfirmAge = 3600*24; // one day * </code> */ $wgAutoConfirmAge = 0; /** * Number of edits an account requires before it is autoconfirmed. * Passing both this AND the time requirement is needed. Example: * * <code> * $wgAutoConfirmCount = 50; * </code> */ $wgAutoConfirmCount = 0; /** * Automatically add a usergroup to any user who matches certain conditions. * The format is * array( '&' or '|' or '^' or '!', cond1, cond2, ... ) * where cond1, cond2, ... are themselves conditions; *OR* * APCOND_EMAILCONFIRMED, *OR* * array( APCOND_EMAILCONFIRMED ), *OR* * array( APCOND_EDITCOUNT, number of edits ), *OR* * array( APCOND_AGE, seconds since registration ), *OR* * array( APCOND_INGROUPS, group1, group2, ... ), *OR* * array( APCOND_ISIP, ip ), *OR* * array( APCOND_IPINRANGE, range ), *OR* * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR* * array( APCOND_BLOCKED ), *OR* * array( APCOND_ISBOT ), *OR* * similar constructs defined by extensions. * * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any * user who has provided an e-mail address. */ $wgAutopromote = array( 'autoconfirmed' => array( '&', array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ), array( APCOND_AGE, &$wgAutoConfirmAge ), ), ); /** * Automatically add a usergroup to any user who matches certain conditions. * Does not add the user to the group again if it has been removed. * Also, does not remove the group if the user no longer meets the criteria. * * The format is * array( event => criteria, ... ) * where event is * 'onEdit' (when user edits) or 'onView' (when user views the wiki) * and criteria has the same format as $wgAutopromote * * @see $wgAutopromote * @since 1.18 */ $wgAutopromoteOnce = array( 'onEdit' => array(), 'onView' => array() ); /* * Put user rights log entries for autopromotion in recent changes? * @since 1.18 */ $wgAutopromoteOnceLogInRC = true; /** * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who * can assign which groups at Special:Userrights. Example configuration: * * @code * // Bureaucrat can add any group * $wgAddGroups['bureaucrat'] = true; * // Bureaucrats can only remove bots and sysops * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' ); * // Sysops can make bots * $wgAddGroups['sysop'] = array( 'bot' ); * // Sysops can disable other sysops in an emergency, and disable bots * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' ); * @endcode */ $wgAddGroups = array(); /** @see $wgAddGroups */ $wgRemoveGroups = array(); /** * A list of available rights, in addition to the ones defined by the core. * For extensions only. */ $wgAvailableRights = array(); /** * Optional to restrict deletion of pages with higher revision counts * to users with the 'bigdelete' permission. (Default given to sysops.) */ $wgDeleteRevisionsLimit = 0; /** Number of accounts each IP address may create, 0 to disable. * Requires memcached */ $wgAccountCreationThrottle = 0; /** * Edits matching these regular expressions in body text * will be recognised as spam and rejected automatically. * * There's no administrator override on-wiki, so be careful what you set. :) * May be an array of regexes or a single string for backwards compatibility. * * See http://en.wikipedia.org/wiki/Regular_expression * Note that each regex needs a beginning/end delimiter, eg: # or / */ $wgSpamRegex = array(); /** Same as the above except for edit summaries */ $wgSummarySpamRegex = array(); /** * Similarly you can get a function to do the job. The function will be given * the following args: * - a Title object for the article the edit is made on * - the text submitted in the textarea (wpTextbox1) * - the section number. * The return should be boolean indicating whether the edit matched some evilness: * - true : block it * - false : let it through * * @deprecated since 1.17 Use hooks. See SpamBlacklist extension. */ $wgFilterCallback = false; /** * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies * @since 1.16 */ $wgEnableDnsBlacklist = false; /** * @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for backward * compatibility */ $wgEnableSorbs = false; /** * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true * @since 1.16 */ $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' ); /** * @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for backward * compatibility */ $wgSorbsUrl = array(); /** * Proxy whitelist, list of addresses that are assumed to be non-proxy despite * what the other methods might say. */ $wgProxyWhitelist = array(); /** * Simple rate limiter options to brake edit floods. Maximum number actions * allowed in the given number of seconds; after that the violating client re- * ceives HTTP 500 error pages until the period elapses. * * array( 4, 60 ) for a maximum of 4 hits in 60 seconds. * * This option set is experimental and likely to change. Requires memcached. */ $wgRateLimits = array( 'edit' => array( 'anon' => null, // for any and all anonymous edits (aggregate) 'user' => null, // for each logged-in user 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user' 'ip' => null, // for each anon and recent account 'subnet' => null, // ... with final octet removed ), 'move' => array( 'user' => null, 'newbie' => null, 'ip' => null, 'subnet' => null, ), 'mailpassword' => array( 'anon' => null, ), 'emailuser' => array( 'user' => null, ), ); /** * Set to a filename to log rate limiter hits. */ $wgRateLimitLog = null; /** * Array of IPs which should be excluded from rate limits. * This may be useful for whitelisting NAT gateways for conferences, etc. */ $wgRateLimitsExcludedIPs = array(); /** * Log IP addresses in the recentchanges table; can be accessed only by * extensions (e.g. CheckUser) or a DB admin */ $wgPutIPinRC = true; /** * Limit password attempts to X attempts per Y seconds per IP per account. * Requires memcached. */ $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 ); /** @} */ # end of user rights settings /************************************************************************//** * @name Proxy scanner settings * @{ */ /** * If you enable this, every editor's IP address will be scanned for open HTTP * proxies. * * Don't enable this. Many sysops will report "hostile TCP port scans" to your * ISP and ask for your server to be shut down. * * You have been warned. */ $wgBlockOpenProxies = false; /** Port we want to scan for a proxy */ $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 ); /** Script used to scan */ $wgProxyScriptPath = "$IP/maintenance/proxy_check.php"; /** */ $wgProxyMemcExpiry = 86400; /** This should always be customised in LocalSettings.php */ $wgSecretKey = false; /** big list of banned IP addresses, in the keys not the values */ $wgProxyList = array(); /** deprecated */ $wgProxyKey = false; /** @} */ # end of proxy scanner settings /************************************************************************//** * @name Cookie settings * @{ */ /** * Default cookie expiration time. Setting to 0 makes all cookies session-only. */ $wgCookieExpiration = 30*86400; /** * Set to set an explicit domain on the login cookies eg, "justthis.domain.org" * or ".any.subdomain.net" */ $wgCookieDomain = ''; /** * Set this variable if you want to restrict cookies to a certain path within * the domain specified by $wgCookieDomain. */ $wgCookiePath = '/'; /** * Whether the "secure" flag should be set on the cookie. This can be: * - true: Set secure flag * - false: Don't set secure flag * - "detect": Set the secure flag if $wgServer is set to an HTTPS URL */ $wgCookieSecure = 'detect'; /** * By default, MediaWiki checks if the client supports cookies during the * login process, so that it can display an informative error message if * cookies are disabled. Set this to true if you want to disable this cookie * check. */ $wgDisableCookieCheck = false; /** * Cookies generated by MediaWiki have names starting with this prefix. Set it * to a string to use a custom prefix. Setting it to false causes the database * name to be used as a prefix. */ $wgCookiePrefix = false; /** * Set authentication cookies to HttpOnly to prevent access by JavaScript, * in browsers that support this feature. This can mitigates some classes of * XSS attack. */ $wgCookieHttpOnly = true; /** * If the requesting browser matches a regex in this blacklist, we won't * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on. */ $wgHttpOnlyBlacklist = array( // Internet Explorer for Mac; sometimes the cookies work, sometimes // they don't. It's difficult to predict, as combinations of path // and expiration options affect its parsing. '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/', ); /** A list of cookies that vary the cache (for use by extensions) */ $wgCacheVaryCookies = array(); /** Override to customise the session name */ $wgSessionName = false; /** @} */ # end of cookie settings } /************************************************************************//** * @name LaTeX (mathematical formulas) * @{ */ /** * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert * (ImageMagick) installed and available in the PATH. * Please see math/README for more information. */ $wgUseTeX = false; /* @} */ # end LaTeX } /************************************************************************//** * @name Profiling, testing and debugging * * To enable profiling, edit StartProfiler.php * * @{ */ /** * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug * The debug log file should be not be publicly accessible if it is used, as it * may contain private data. */ $wgDebugLogFile = ''; /** * Prefix for debug log lines */ $wgDebugLogPrefix = ''; /** * If true, instead of redirecting, show a page with a link to the redirect * destination. This allows for the inspection of PHP error messages, and easy * resubmission of form data. For developer use only. */ $wgDebugRedirects = false; /** * If true, log debugging data from action=raw and load.php. * This is normally false to avoid overlapping debug entries due to gen=css and * gen=js requests. */ $wgDebugRawPage = false; /** * Send debug data to an HTML comment in the output. * * This may occasionally be useful when supporting a non-technical end-user. It's * more secure than exposing the debug log file to the web, since the output only * contains private data for the current user. But it's not ideal for development * use since data is lost on fatal errors and redirects. */ $wgDebugComments = false; /** * Write SQL queries to the debug log */ $wgDebugDumpSql = false; /** * Set to an array of log group keys to filenames. * If set, wfDebugLog() output for that group will go to that file instead * of the regular $wgDebugLogFile. Useful for enabling selective logging * in production. */ $wgDebugLogGroups = array(); /** * Display debug data at the bottom of the main content area. * * Useful for developers and technical users trying to working on a closed wiki. */ $wgShowDebug = false; /** * Prefix debug messages with relative timestamp. Very-poor man's profiler. */ $wgDebugTimestamps = false; /** * Print HTTP headers for every request in the debug information. */ $wgDebugPrintHttpHeaders = true; /** * Show the contents of $wgHooks in Special:Version */ $wgSpecialVersionShowHooks = false; /** * Whether to show "we're sorry, but there has been a database error" pages. * Displaying errors aids in debugging, but may display information useful * to an attacker. */ $wgShowSQLErrors = false; /** * If set to true, uncaught exceptions will print a complete stack trace * to output. This should only be used for debugging, as it may reveal * private information in function parameters due to PHP's backtrace * formatting. */ $wgShowExceptionDetails = false; /** * If true, show a backtrace for database errors */ $wgShowDBErrorBacktrace = false; /** * Expose backend server host names through the API and various HTML comments */ $wgShowHostnames = false; /** * If set to true MediaWiki will throw notices for some possible error * conditions and for deprecated functions. */ $wgDevelopmentWarnings = false; /** Only record profiling info for pages that took longer than this */ $wgProfileLimit = 0.0; /** Don't put non-profiling info into log file */ $wgProfileOnly = false; /** * Log sums from profiling into "profiling" table in db. * * You have to create a 'profiling' table in your database before using * this feature, see maintenance/archives/patch-profiling.sql * * To enable profiling, edit StartProfiler.php */ $wgProfileToDatabase = false; /** If true, print a raw call tree instead of per-function report */ $wgProfileCallTree = false; /** Should application server host be put into profiling table */ $wgProfilePerHost = false; /** * Host for UDP profiler. * * The host should be running a daemon which can be obtained from MediaWiki * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile */ $wgUDPProfilerHost = '127.0.0.1'; /** * Port for UDP profiler. * @see $wgUDPProfilerHost */ $wgUDPProfilerPort = '3811'; /** Detects non-matching wfProfileIn/wfProfileOut calls */ $wgDebugProfiling = false; /** Output debug message on every wfProfileIn/wfProfileOut */ $wgDebugFunctionEntry = 0; /** * Destination for wfIncrStats() data... * 'cache' to go into the system cache, if enabled (memcached) * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost) * false to disable */ $wgStatsMethod = 'cache'; /** * When $wgStatsMethod is 'udp', setting this to a string allows statistics to * be aggregated over more than one wiki. The string will be used in place of * the DB name in outgoing UDP packets. If this is set to false, the DB name * will be used. */ $wgAggregateStatsID = false; /** Whereas to count the number of time an article is viewed. * Does not work if pages are cached (for example with squid). */ $wgDisableCounters = false; /** * Support blog-style "trackbacks" for articles. See * http://www.sixapart.com/pronet/docs/trackback_spec for details. * * If enabling this, you also need to grant the 'trackback' right to a group */ $wgUseTrackbacks = false; /** * Parser test suite files to be run by parserTests.php when no specific * filename is passed to it. * * Extensions may add their own tests to this array, or site-local tests * may be added via LocalSettings.php * * Use full paths. */ $wgParserTestFiles = array( "$IP/tests/parser/parserTests.txt", "$IP/tests/parser/extraParserTests.txt" ); /** * If configured, specifies target CodeReview installation to send test * result data from 'parserTests.php --upload' * * Something like this: * $wgParserTestRemote = array( * 'api-url' => 'http://www.mediawiki.org/w/api.php', * 'repo' => 'MediaWiki', * 'suite' => 'ParserTests', * 'path' => '/trunk/phase3', // not used client-side; for reference * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation * ); */ $wgParserTestRemote = false; /** @} */ # end of profiling, testing and debugging } /************************************************************************//** * @name Search * @{ */ /** * Set this to true to disable the full text search feature. */ $wgDisableTextSearch = false; /** * Set to true to have nicer highligted text in search results, * by default off due to execution overhead */ $wgAdvancedSearchHighlighting = false; /** * Regexp to match word boundaries, defaults for non-CJK languages * should be empty for CJK since the words are not separate */ $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]'; /** * Set to true to have the search engine count total * search matches to present in the Special:Search UI. * Not supported by every search engine shipped with MW. * * This could however be slow on larger wikis, and is pretty flaky * with the current title vs content split. Recommend avoiding until * that's been worked out cleanly; but this may aid in testing the * search UI and API to confirm that the result count works. */ $wgCountTotalSearchHits = false; /** * Template for OpenSearch suggestions, defaults to API action=opensearch * * Sites with heavy load would tipically have these point to a custom * PHP wrapper to avoid firing up mediawiki for every keystroke * * Placeholders: {searchTerms} * */ $wgOpenSearchTemplate = false; /** * Enable suggestions while typing in search boxes * (results are passed around in OpenSearch format) * Requires $wgEnableOpenSearchSuggest = true; */ $wgEnableMWSuggest = false; /** * Enable OpenSearch suggestions requested by MediaWiki. Set this to * false if you've disabled MWSuggest or another suggestion script and * want reduce load caused by cached scripts pulling suggestions. */ $wgEnableOpenSearchSuggest = true; /** * Expiry time for search suggestion responses */ $wgSearchSuggestCacheExpiry = 1200; /** * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch * * Placeholders: {searchTerms}, {namespaces}, {dbname} * */ $wgMWSuggestTemplate = false; /** * If you've disabled search semi-permanently, this also disables updates to the * table. If you ever re-enable, be sure to rebuild the search table. */ $wgDisableSearchUpdate = false; /** * List of namespaces which are searched by default. Example: * * <code> * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true; * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true; * </code> */ $wgNamespacesToBeSearchedDefault = array( NS_MAIN => true, ); /** * Namespaces to be searched when user clicks the "Help" tab * on Special:Search * * Same format as $wgNamespacesToBeSearchedDefault */ $wgNamespacesToBeSearchedHelp = array( NS_PROJECT => true, NS_HELP => true, ); /** * If set to true the 'searcheverything' preference will be effective only for logged-in users. * Useful for big wikis to maintain different search profiles for anonymous and logged-in users. * */ $wgSearchEverythingOnlyLoggedIn = false; /** * Disable the internal MySQL-based search, to allow it to be * implemented by an extension instead. */ $wgDisableInternalSearch = false; /** * Set this to a URL to forward search requests to some external location. * If the URL includes '$1', this will be replaced with the URL-encoded * search term. * * For example, to forward to Google you'd have something like: * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' . * '&domains=http://example.com' . * '&sitesearch=http://example.com' . * '&ie=utf-8&oe=utf-8'; */ $wgSearchForwardUrl = null; /** * Search form behavior * true = use Go & Search buttons * false = use Go button & Advanced search link */ $wgUseTwoButtonsSearchForm = true; /** * Array of namespaces to generate a Google sitemap for when the * maintenance/generateSitemap.php script is run, or false if one is to be ge- * nerated for all namespaces. */ $wgSitemapNamespaces = false; /** @} */ # end of search settings /************************************************************************//** * @name Edit user interface * @{ */ /** * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will * fall back to the old behaviour (no merging). */ $wgDiff3 = '/usr/bin/diff3'; /** * Path to the GNU diff utility. */ $wgDiff = '/usr/bin/diff'; /** * Which namespaces have special treatment where they should be preview-on-open * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki) * can specify namespaces of pages they have special treatment for */ $wgPreviewOnOpenNamespaces = array( NS_CATEGORY => true ); /** * Activate external editor interface for files and pages * See http://www.mediawiki.org/wiki/Manual:External_editors */ $wgUseExternalEditor = true; /** Go button goes straight to the edit screen if the article doesn't exist. */ $wgGoToEdit = false; /** * Enable the UniversalEditButton for browsers that support it * (currently only Firefox with an extension) * See http://universaleditbutton.org for more background information */ $wgUniversalEditButton = true; /** * If user doesn't specify any edit summary when making a an edit, MediaWiki * will try to automatically create one. This feature can be disabled by set- * ting this variable false. */ $wgUseAutomaticEditSummaries = true; /** @} */ # end edit UI } /************************************************************************//** * @name Maintenance * See also $wgSiteNotice * @{ */ /** * @cond file_level_code * Set $wgCommandLineMode if it's not set already, to avoid notices */ if( !isset( $wgCommandLineMode ) ) { $wgCommandLineMode = false; } /** @endcond */ /** For colorized maintenance script output, is your terminal background dark ? */ $wgCommandLineDarkBg = false; /** * Array for extensions to register their maintenance scripts with the * system. The key is the name of the class and the value is the full * path to the file */ $wgMaintenanceScripts = array(); /** * Set this to a string to put the wiki into read-only mode. The text will be * used as an explanation to users. * * This prevents most write operations via the web interface. Cache updates may * still be possible. To prevent database writes completely, use the read_only * option in MySQL. */ $wgReadOnly = null; /** * If this lock file exists (size > 0), the wiki will be forced into read-only mode. * Its contents will be shown to users as part of the read-only warning * message. * * Defaults to "{$wgUploadDirectory}/lock_yBgMBwiR". */ $wgReadOnlyFile = false; /** * When you run the web-based upgrade utility, it will tell you what to set * this to in order to authorize the upgrade process. It will subsequently be * used as a password, to authorize further upgrades. * * For security, do not set this to a guessable string. Use the value supplied * by the install/upgrade process. To cause the upgrader to generate a new key, * delete the old key from LocalSettings.php. */ $wgUpgradeKey = false; /** @} */ # End of maintenance } /************************************************************************//** * @name Recent changes, new pages, watchlist and history * @{ */ /** * Recentchanges items are periodically purged; entries older than this many * seconds will go. * Default: 13 weeks = about three months */ $wgRCMaxAge = 13 * 7 * 24 * 3600; /** * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers * higher than what will be stored. Note that this is disabled by default * because we sometimes do have RC data which is beyond the limit for some * reason, and some users may use the high numbers to display that data which * is still there. */ $wgRCFilterByAge = false; /** * List of Days and Limits options to list in the Special:Recentchanges and * Special:Recentchangeslinked pages. */ $wgRCLinkLimits = array( 50, 100, 250, 500 ); $wgRCLinkDays = array( 1, 3, 7, 14, 30 ); /** * Send recent changes updates via UDP. The updates will be formatted for IRC. * Set this to the IP address of the receiver. */ $wgRC2UDPAddress = false; /** * Port number for RC updates */ $wgRC2UDPPort = false; /** * Prefix to prepend to each UDP packet. * This can be used to identify the wiki. A script is available called * mxircecho.py which listens on a UDP port, and uses a prefix ending in a * tab to identify the IRC channel to send the log line to. */ $wgRC2UDPPrefix = ''; /** * If this is set to true, $wgLocalInterwiki will be prepended to links in the * IRC feed. If this is set to a string, that string will be used as the prefix. */ $wgRC2UDPInterwikiPrefix = false; /** * Set to true to omit "bot" edits (by users with the bot permission) from the * UDP feed. */ $wgRC2UDPOmitBots = false; /** * Enable user search in Special:Newpages * This is really a temporary hack around an index install bug on some Wikipedias. * Kill it once fixed. */ $wgEnableNewpagesUserFilter = true; /** Use RC Patrolling to check for vandalism */ $wgUseRCPatrol = true; /** Use new page patrolling to check new pages on Special:Newpages */ $wgUseNPPatrol = true; /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */ $wgFeed = true; /** Set maximum number of results to return in syndication feeds (RSS, Atom) for * eg Recentchanges, Newpages. */ $wgFeedLimit = 50; /** _Minimum_ timeout for cached Recentchanges feed, in seconds. * A cached version will continue to be served out even if changes * are made, until this many seconds runs out since the last render. * * If set to 0, feed caching is disabled. Use this for debugging only; * feed generation can be pretty slow with diffs. */ $wgFeedCacheTimeout = 60; /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for * pages larger than this size. */ $wgFeedDiffCutoff = 32768; /** Override the site's default RSS/ATOM feed for recentchanges that appears on * every page. Some sites might have a different feed they'd like to promote * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one). * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one * of either 'rss' or 'atom'. */ $wgOverrideSiteFeed = array(); /** * Available feeds objects * Should probably only be defined when a page is syndicated ie when * $wgOut->isSyndicated() is true */ $wgFeedClasses = array( 'rss' => 'RSSFeed', 'atom' => 'AtomFeed', ); /** * Which feed types should we provide by default? This can include 'rss', * 'atom', neither, or both. */ $wgAdvertisedFeedTypes = array( 'atom' ); /** Show watching users in recent changes, watchlist and page history views */ $wgRCShowWatchingUsers = false; # UPO /** Show watching users in Page views */ $wgPageShowWatchingUsers = false; /** Show the amount of changed characters in recent changes */ $wgRCShowChangedSize = true; /** * If the difference between the character counts of the text * before and after the edit is below that value, the value will be * highlighted on the RC page. */ $wgRCChangedSizeThreshold = 500; /** * Show "Updated (since my last visit)" marker in RC view, watchlist and history * view for watched pages with new changes */ $wgShowUpdatedMarker = true; /** * Disable links to talk pages of anonymous users (IPs) in listings on special * pages like page history, Special:Recentchanges, etc. */ $wgDisableAnonTalk = false; /** * Enable filtering of categories in Recentchanges */ $wgAllowCategorizedRecentChanges = false; /** * Allow filtering by change tag in recentchanges, history, etc * Has no effect if no tags are defined in valid_tag. */ $wgUseTagFilter = true; /** @} */ # end RC/watchlist } /************************************************************************//** * @name Copyright and credits settings * @{ */ /** * Override for copyright metadata. * * This is the name of the page containing information about the wiki's copyright status, * which will be added as a link in the footer if it is specified. It overrides * $wgRightsUrl if both are specified. */ $wgRightsPage = null; /** * Set this to specify an external URL containing details about the content license used on your wiki. * If $wgRightsPage is set then this setting is ignored. */ $wgRightsUrl = null; /** * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link. * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the * page will also be used as the link if this variable is not set. */ $wgRightsText = null; /** * Override for copyright metadata. */ $wgRightsIcon = null; /** * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl */ $wgLicenseTerms = false; /** * Set this to some HTML to override the rights icon with an arbitrary logo * @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright'] */ $wgCopyrightIcon = null; /** Set this to true if you want detailed copyright information forms on Upload. */ $wgUseCopyrightUpload = false; /** * Set this to the number of authors that you want to be credited below an * article text. Set it to zero to hide the attribution block, and a negative * number (like -1) to show all authors. Note that this will require 2-3 extra * database hits, which can have a not insignificant impact on performance for * large wikis. */ $wgMaxCredits = 0; /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them. * Otherwise, link to a separate credits page. */ $wgShowCreditsIfMax = true; /** @} */ # end of copyright and credits settings } /************************************************************************//** * @name Import / Export * @{ */ /** * List of interwiki prefixes for wikis we'll accept as sources for * Special:Import (for sysops). Since complete page history can be imported, * these should be 'trusted'. * * If a user has the 'import' permission but not the 'importupload' permission, * they will only be able to run imports through this transwiki interface. */ $wgImportSources = array(); /** * Optional default target namespace for interwiki imports. * Can use this to create an incoming "transwiki"-style queue. * Set to numeric key, not the name. * * Users may override this in the Special:Import dialog. */ $wgImportTargetNamespace = null; /** * If set to false, disables the full-history option on Special:Export. * This is currently poorly optimized for long edit histories, so is * disabled on Wikimedia's sites. */ $wgExportAllowHistory = true; /** * If set nonzero, Special:Export requests for history of pages with * more revisions than this will be rejected. On some big sites things * could get bogged down by very very long pages. */ $wgExportMaxHistory = 0; /** * Return distinct author list (when not returning full history) */ $wgExportAllowListContributors = false ; /** * If non-zero, Special:Export accepts a "pagelink-depth" parameter * up to this specified level, which will cause it to include all * pages linked to from the pages you specify. Since this number * can become *insanely large* and could easily break your wiki, * it's disabled by default for now. * * There's a HARD CODED limit of 5 levels of recursion to prevent a * crazy-big export from being done by someone setting the depth * number too high. In other words, last resort safety net. */ $wgExportMaxLinkDepth = 0; /** * Whether to allow the "export all pages in namespace" option */ $wgExportFromNamespaces = false; /** @} */ # end of import/export } /*************************************************************************//** * @name Extensions * @{ */ /** * A list of callback functions which are called once MediaWiki is fully initialised */ $wgExtensionFunctions = array(); /** * Extension messages files. * * Associative array mapping extension name to the filename where messages can be * found. The file should contain variable assignments. Any of the variables * present in languages/messages/MessagesEn.php may be defined, but $messages * is the most common. * * Variables defined in extensions will override conflicting variables defined * in the core. * * Example: * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php'; * */ $wgExtensionMessagesFiles = array(); /** * Aliases for special pages provided by extensions. * @deprecated since 1.16 Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles */ $wgExtensionAliasesFiles = array(); /** * Parser output hooks. * This is an associative array where the key is an extension-defined tag * (typically the extension name), and the value is a PHP callback. * These will be called as an OutputPageParserOutput hook, if the relevant * tag has been registered with the parser output object. * * Registration is done with $pout->addOutputHook( $tag, $data ). * * The callback has the form: * function outputHook( $outputPage, $parserOutput, $data ) { ... } */ $wgParserOutputHooks = array(); /** * List of valid skin names. * The key should be the name in all lower case, the value should be a properly * cased name for the skin. This value will be prefixed with "Skin" to create the * class name of the skin to load, and if the skin's class cannot be found through * the autoloader it will be used to load a .php file by that name in the skins directory. * The default skins will be added later, by Skin::getSkinNames(). Use * Skin::getSkinNames() as an accessor if you wish to have access to the full list. */ $wgValidSkinNames = array(); /** * Special page list. * See the top of SpecialPage.php for documentation. */ $wgSpecialPages = array(); /** * Array mapping class names to filenames, for autoloading. */ $wgAutoloadClasses = array(); /** * An array of extension types and inside that their names, versions, authors, * urls, descriptions and pointers to localized description msgs. Note that * the version, url, description and descriptionmsg key can be omitted. * * <code> * $wgExtensionCredits[$type][] = array( * 'name' => 'Example extension', * 'version' => 1.9, * 'path' => __FILE__, * 'author' => 'Foo Barstein', * 'url' => 'http://wwww.example.com/Example%20Extension/', * 'description' => 'An example extension', * 'descriptionmsg' => 'exampleextension-desc', * ); * </code> * * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'. * Where 'descriptionmsg' can be an array with message key and parameters: * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ), */ $wgExtensionCredits = array(); /** * Authentication plugin. * @var AuthPlugin */ $wgAuth = null; /** * Global list of hooks. * Add a hook by doing: * $wgHooks['event_name'][] = $function; * or: * $wgHooks['event_name'][] = array($function, $data); * or: * $wgHooks['event_name'][] = array($object, 'method'); */ $wgHooks = array(); /** * Maps jobs to their handling classes; extensions * can add to this to provide custom jobs */ $wgJobClasses = array( 'refreshLinks' => 'RefreshLinksJob', 'refreshLinks2' => 'RefreshLinksJob2', 'htmlCacheUpdate' => 'HTMLCacheUpdateJob', 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible 'sendMail' => 'EmaillingJob', 'enotifNotify' => 'EnotifNotifyJob', 'fixDoubleRedirect' => 'DoubleRedirectJob', 'uploadFromUrl' => 'UploadFromUrlJob', ); /** * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set. * * These can be: * - Very long-running jobs. * - Jobs that you would never want to run as part of a page rendering request. * - Jobs that you want to run on specialized machines ( like transcoding, or a particular * machine on your cluster has 'outside' web access you could restrict uploadFromUrl ) */ $wgJobTypesExcludedFromDefaultQueue = array(); /** * Additional functions to be performed with updateSpecialPages. * Expensive Querypages are already updated. */ $wgSpecialPageCacheUpdates = array( 'Statistics' => array('SiteStatsUpdate','cacheUpdate') ); /** * Hooks that are used for outputting exceptions. Format is: * $wgExceptionHooks[] = $funcname * or: * $wgExceptionHooks[] = array( $class, $funcname ) * Hooks should return strings or false */ $wgExceptionHooks = array(); /** * Page property link table invalidation lists. When a page property * changes, this may require other link tables to be updated (eg * adding __HIDDENCAT__ means the hiddencat tracking category will * have been added, so the categorylinks table needs to be rebuilt). * This array can be added to by extensions. */ $wgPagePropLinkInvalidations = array( 'hiddencat' => 'categorylinks', ); /** @} */ # End extensions } /*************************************************************************//** * @name Categories * @{ */ /** * Use experimental, DMOZ-like category browser */ $wgUseCategoryBrowser = false; /** * On category pages, show thumbnail gallery for images belonging to that * category instead of listing them as articles. */ $wgCategoryMagicGallery = true; /** * Paging limit for categories */ $wgCategoryPagingLimit = 200; /** * Specify how category names should be sorted, when listed on a category page. * A sorting scheme is also known as a collation. * * Available values are: * * - uppercase: Converts the category name to upper case, and sorts by that. * * - identity: Does no conversion. Sorts by binary value of the string. * * - uca-default: Provides access to the Unicode Collation Algorithm with * the default element table. This is a compromise collation which sorts * all languages in a mediocre way. However, it is better than "uppercase". * * To use the uca-default collation, you must have PHP's intl extension * installed. See http://php.net/manual/en/intl.setup.php . The details of the * resulting collation will depend on the version of ICU installed on the * server. * * After you change this, you must run maintenance/updateCollation.php to fix * the sort keys in the database. * * Extensions can define there own collations by subclassing Collation * and using the Collation::factory hook. */ $wgCategoryCollation = 'uppercase'; /** @} */ # End categories } /*************************************************************************//** * @name Logging * @{ */ /** * The logging system has two levels: an event type, which describes the * general category and can be viewed as a named subset of all logs; and * an action, which is a specific kind of event that can exist in that * log type. */ $wgLogTypes = array( '', 'block', 'protect', 'rights', 'delete', 'upload', 'move', 'import', 'patrol', 'merge', 'suppress', ); /** * This restricts log access to those who have a certain right * Users without this will not see it in the option menu and can not view it * Restricted logs are not added to recent changes * Logs should remain non-transcludable * Format: logtype => permissiontype */ $wgLogRestrictions = array( 'suppress' => 'suppressionlog' ); /** * Show/hide links on Special:Log will be shown for these log types. * * This is associative array of log type => boolean "hide by default" * * See $wgLogTypes for a list of available log types. * * For example: * $wgFilterLogTypes => array( * 'move' => true, * 'import' => false, * ); * * Will display show/hide links for the move and import logs. Move logs will be * hidden by default unless the link is clicked. Import logs will be shown by * default, and hidden when the link is clicked. * * A message of the form log-show-hide-<type> should be added, and will be used * for the link text. */ $wgFilterLogTypes = array( 'patrol' => true ); /** * Lists the message key string for each log type. The localized messages * will be listed in the user interface. * * Extensions with custom log types may add to this array. */ $wgLogNames = array( '' => 'all-logs-page', 'block' => 'blocklogpage', 'protect' => 'protectlogpage', 'rights' => 'rightslog', 'delete' => 'dellogpage', 'upload' => 'uploadlogpage', 'move' => 'movelogpage', 'import' => 'importlogpage', 'patrol' => 'patrol-log-page', 'merge' => 'mergelog', 'suppress' => 'suppressionlog', ); /** * Lists the message key string for descriptive text to be shown at the * top of each log type. * * Extensions with custom log types may add to this array. */ $wgLogHeaders = array( '' => 'alllogstext', 'block' => 'blocklogtext', 'protect' => 'protectlogtext', 'rights' => 'rightslogtext', 'delete' => 'dellogpagetext', 'upload' => 'uploadlogpagetext', 'move' => 'movelogpagetext', 'import' => 'importlogpagetext', 'patrol' => 'patrol-log-header', 'merge' => 'mergelogpagetext', 'suppress' => 'suppressionlogtext', ); /** * Lists the message key string for formatting individual events of each * type and action when listed in the logs. * * Extensions with custom log types may add to this array. */ $wgLogActions = array( 'block/block' => 'blocklogentry', 'block/unblock' => 'unblocklogentry', 'block/reblock' => 'reblock-logentry', 'protect/protect' => 'protectedarticle', 'protect/modify' => 'modifiedarticleprotection', 'protect/unprotect' => 'unprotectedarticle', 'protect/move_prot' => 'movedarticleprotection', 'rights/rights' => 'rightslogentry', 'rights/autopromote' => 'rightslogentry-autopromote', 'delete/delete' => 'deletedarticle', 'delete/restore' => 'undeletedarticle', 'delete/revision' => 'revdelete-logentry', 'delete/event' => 'logdelete-logentry', 'upload/upload' => 'uploadedimage', 'upload/overwrite' => 'overwroteimage', 'upload/revert' => 'uploadedimage', 'move/move' => '1movedto2', 'move/move_redir' => '1movedto2_redir', 'import/upload' => 'import-logentry-upload', 'import/interwiki' => 'import-logentry-interwiki', 'merge/merge' => 'pagemerge-logentry', 'suppress/revision' => 'revdelete-logentry', 'suppress/file' => 'revdelete-logentry', 'suppress/event' => 'logdelete-logentry', 'suppress/delete' => 'suppressedarticle', 'suppress/block' => 'blocklogentry', 'suppress/reblock' => 'reblock-logentry', 'patrol/patrol' => 'patrol-log-line', ); /** * The same as above, but here values are names of functions, * not messages. * @see LogPage::actionText */ $wgLogActionsHandlers = array(); /** * Maintain a log of newusers at Log/newusers? */ $wgNewUserLog = true; /** @} */ # end logging } /*************************************************************************//** * @name Special pages (general and miscellaneous) * @{ */ /** * Allow special page inclusions such as {{Special:Allpages}} */ $wgAllowSpecialInclusion = true; /** * Set this to an array of special page names to prevent * maintenance/updateSpecialPages.php from updating those pages. */ $wgDisableQueryPageUpdate = false; /** * List of special pages, followed by what subtitle they should go under * at Special:SpecialPages */ $wgSpecialPageGroups = array( 'DoubleRedirects' => 'maintenance', 'BrokenRedirects' => 'maintenance', 'Lonelypages' => 'maintenance', 'Uncategorizedpages' => 'maintenance', 'Uncategorizedcategories' => 'maintenance', 'Uncategorizedimages' => 'maintenance', 'Uncategorizedtemplates' => 'maintenance', 'Unusedcategories' => 'maintenance', 'Unusedimages' => 'maintenance', 'Protectedpages' => 'maintenance', 'Protectedtitles' => 'maintenance', 'Unusedtemplates' => 'maintenance', 'Withoutinterwiki' => 'maintenance', 'Longpages' => 'maintenance', 'Shortpages' => 'maintenance', 'Ancientpages' => 'maintenance', 'Deadendpages' => 'maintenance', 'Wantedpages' => 'maintenance', 'Wantedcategories' => 'maintenance', 'Wantedfiles' => 'maintenance', 'Wantedtemplates' => 'maintenance', 'Unwatchedpages' => 'maintenance', 'Fewestrevisions' => 'maintenance', 'Userlogin' => 'login', 'Userlogout' => 'login', 'CreateAccount' => 'login', 'Recentchanges' => 'changes', 'Recentchangeslinked' => 'changes', 'Watchlist' => 'changes', 'Newimages' => 'changes', 'Newpages' => 'changes', 'Log' => 'changes', 'Tags' => 'changes', 'Upload' => 'media', 'Listfiles' => 'media', 'MIMEsearch' => 'media', 'FileDuplicateSearch' => 'media', 'Filepath' => 'media', 'Listusers' => 'users', 'Activeusers' => 'users', 'Listgrouprights' => 'users', 'BlockList' => 'users', 'Contributions' => 'users', 'Emailuser' => 'users', 'Listadmins' => 'users', 'Listbots' => 'users', 'Userrights' => 'users', 'Block' => 'users', 'Unblock' => 'users', 'Preferences' => 'users', 'ChangePassword' => 'users', 'DeletedContributions' => 'users', 'PasswordReset' => 'users', 'Mostlinked' => 'highuse', 'Mostlinkedcategories' => 'highuse', 'Mostlinkedtemplates' => 'highuse', 'Mostcategories' => 'highuse', 'Mostimages' => 'highuse', 'Mostrevisions' => 'highuse', 'Allpages' => 'pages', 'Prefixindex' => 'pages', 'Listredirects' => 'pages', 'Categories' => 'pages', 'Disambiguations' => 'pages', 'Randompage' => 'redirects', 'Randomredirect' => 'redirects', 'Mypage' => 'redirects', 'Mytalk' => 'redirects', 'Mycontributions' => 'redirects', 'Search' => 'redirects', 'LinkSearch' => 'redirects', 'ComparePages' => 'pagetools', 'Movepage' => 'pagetools', 'MergeHistory' => 'pagetools', 'Revisiondelete' => 'pagetools', 'Undelete' => 'pagetools', 'Export' => 'pagetools', 'Import' => 'pagetools', 'Whatlinkshere' => 'pagetools', 'Statistics' => 'wiki', 'Version' => 'wiki', 'Lockdb' => 'wiki', 'Unlockdb' => 'wiki', 'Allmessages' => 'wiki', 'Popularpages' => 'wiki', 'Specialpages' => 'other', 'Blockme' => 'other', 'Booksources' => 'other', ); /** Whether or not to sort special pages in Special:Specialpages */ $wgSortSpecialPages = true; /** * On Special:Unusedimages, consider images "used", if they are put * into a category. Default (false) is not to count those as used. */ $wgCountCategorizedImagesAsUsed = false; /** * Maximum number of links to a redirect page listed on * Special:Whatlinkshere/RedirectDestination */ $wgMaxRedirectLinksRetrieved = 500; /** @} */ # end special pages } /*************************************************************************//** * @name Actions * @{ */ /** * Array of allowed values for the title=foo&action=<action> parameter. Syntax is: * 'foo' => 'ClassName' Load the specified class which subclasses Action * 'foo' => true Load the class FooAction which subclasses Action * If something is specified in the getActionOverrides() * of the relevant Page object it will be used * instead of the default class. * 'foo' => false The action is disabled; show an error message * Unsetting core actions will probably cause things to complain loudly. */ $wgActions = array( 'credits' => true, 'deletetrackback' => true, 'info' => true, 'markpatrolled' => true, 'purge' => true, 'revert' => true, 'revisiondelete' => true, 'rollback' => true, 'unwatch' => true, 'watch' => true, ); /** * Array of disabled article actions, e.g. view, edit, delete, etc. * @deprecated since 1.18; just set $wgActions['action'] = false instead */ $wgDisabledActions = array(); /** * Allow the "info" action, very inefficient at the moment */ $wgAllowPageInfo = false; /** @} */ # end actions } /*************************************************************************//** * @name Robot (search engine crawler) policy * See also $wgNoFollowLinks. * @{ */ /** * Default robot policy. The default policy is to encourage indexing and fol- * lowing of links. It may be overridden on a per-namespace and/or per-page * basis. */ $wgDefaultRobotPolicy = 'index,follow'; /** * Robot policies per namespaces. The default policy is given above, the array * is made of namespace constants as defined in includes/Defines.php. You can- * not specify a different default policy for NS_SPECIAL: it is always noindex, * nofollow. This is because a number of special pages (e.g., ListPages) have * many permutations of options that display the same data under redundant * URLs, so search engine spiders risk getting lost in a maze of twisty special * pages, all alike, and never reaching your actual content. * * Example: * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' ); */ $wgNamespaceRobotPolicies = array(); /** * Robot policies per article. These override the per-namespace robot policies. * Must be in the form of an array where the key part is a properly canonical- * ised text form title and the value is a robot policy. * Example: * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow', * 'User:Bob' => 'index,follow' ); * Example that DOES NOT WORK because the names are not canonical text forms: * $wgArticleRobotPolicies = array( * # Underscore, not space! * 'Main_Page' => 'noindex,follow', * # "Project", not the actual project name! * 'Project:X' => 'index,follow', * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)! * 'abc' => 'noindex,nofollow' * ); */ $wgArticleRobotPolicies = array(); /** * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words * will not function, so users can't decide whether pages in that namespace are * indexed by search engines. If set to null, default to $wgContentNamespaces. * Example: * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT ); */ $wgExemptFromUserRobotsControl = null; /** @} */ # End robot policy } /************************************************************************//** * @name AJAX and API * Note: The AJAX entry point which this section refers to is gradually being * replaced by the API entry point, api.php. They are essentially equivalent. * Both of them are used for dynamic client-side features, via XHR. * @{ */ /** * Enable the MediaWiki API for convenient access to * machine-readable data via api.php * * See http://www.mediawiki.org/wiki/API */ $wgEnableAPI = true; /** * Allow the API to be used to perform write operations * (page edits, rollback, etc.) when an authorised user * accesses it */ $wgEnableWriteAPI = true; /** * API module extensions * Associative array mapping module name to class name. * Extension modules may override the core modules. */ $wgAPIModules = array(); $wgAPIMetaModules = array(); $wgAPIPropModules = array(); $wgAPIListModules = array(); /** * Maximum amount of rows to scan in a DB query in the API * The default value is generally fine */ $wgAPIMaxDBRows = 5000; /** * The maximum size (in bytes) of an API result. * Don't set this lower than $wgMaxArticleSize*1024 */ $wgAPIMaxResultSize = 8388608; /** * The maximum number of uncached diffs that can be retrieved in one API * request. Set this to 0 to disable API diffs altogether */ $wgAPIMaxUncachedDiffs = 1; /** * Log file or URL (TCP or UDP) to log API requests to, or false to disable * API request logging */ $wgAPIRequestLog = false; /** * Set the timeout for the API help text cache. If set to 0, caching disabled */ $wgAPICacheHelpTimeout = 60*60; /** * Enable AJAX framework */ $wgUseAjax = true; /** * List of Ajax-callable functions. * Extensions acting as Ajax callbacks must register here */ $wgAjaxExportList = array(); /** * Enable watching/unwatching pages using AJAX. * Requires $wgUseAjax to be true too. */ $wgAjaxWatch = true; /** * Enable AJAX check for file overwrite, pre-upload */ $wgAjaxUploadDestCheck = true; /** * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true. */ $wgAjaxLicensePreview = true; /** * Settings for incoming cross-site AJAX requests: * Newer browsers support cross-site AJAX when the target resource allows requests * from the origin domain by the Access-Control-Allow-Origin header. * This is currently only used by the API (requests to api.php) * $wgCrossSiteAJAXdomains can be set using a wildcard syntax: * * '*' matches any number of characters * '?' matches any 1 character * * Example: $wgCrossSiteAJAXdomains = array( 'www.mediawiki.org', '*.wikipedia.org', '*.wikimedia.org', '*.wiktionary.org', ); * */ $wgCrossSiteAJAXdomains = array(); /** * Domains that should not be allowed to make AJAX requests, * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains * Uses the same syntax as $wgCrossSiteAJAXdomains */ $wgCrossSiteAJAXdomainExceptions = array(); /** @} */ # End AJAX and API } /************************************************************************//** * @name Shell and process control * @{ */ /** * Maximum amount of virtual memory available to shell processes under linux, in KB. */ $wgMaxShellMemory = 102400; /** * Maximum file size created by shell processes under linux, in KB * ImageMagick convert for example can be fairly hungry for scratch space */ $wgMaxShellFileSize = 102400; /** * Maximum CPU time in seconds for shell processes under linux */ $wgMaxShellTime = 180; /** * Executable path of the PHP cli binary (php/php5). Should be set up on install. */ $wgPhpCli = '/usr/bin/php'; /** * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132 * For Unix-like operating systems, set this to to a locale that has a UTF-8 * character set. Only the character set is relevant. */ $wgShellLocale = 'en_US.utf8'; /** @} */ # End shell } /************************************************************************//** * @name HTTP client * @{ */ /** * Timeout for HTTP requests done internally */ $wgHTTPTimeout = 25; /** * Timeout for Asynchronous (background) HTTP requests */ $wgAsyncHTTPTimeout = 25; /** * Proxy to use for CURL requests. */ $wgHTTPProxy = false; /** @} */ # End HTTP client } /************************************************************************//** * @name Job queue * See also $wgEnotifUseJobQ. * @{ */ /** * Number of jobs to perform per request. May be less than one in which case * jobs are performed probabalistically. If this is zero, jobs will not be done * during ordinary apache requests. In this case, maintenance/runJobs.php should * be run periodically. */ $wgJobRunRate = 1; /** * Number of rows to update per job */ $wgUpdateRowsPerJob = 500; /** * Number of rows to update per query */ $wgUpdateRowsPerQuery = 100; /** @} */ # End job queue } /************************************************************************//** * @name HipHop compilation * @{ */ /** * The build directory for HipHop compilation. * Defaults to $IP/maintenance/hiphop/build. */ $wgHipHopBuildDirectory = false; /** * The HipHop build type. Can be either "Debug" or "Release". */ $wgHipHopBuildType = 'Debug'; /** * Number of parallel processes to use during HipHop compilation, or "detect" * to guess from system properties. */ $wgHipHopCompilerProcs = 'detect'; /** * Filesystem extensions directory. Defaults to $IP/../extensions. * * To compile extensions with HipHop, set $wgExtensionsDirectory correctly, * and use code like: * * require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) ); * * to include the extension setup file from LocalSettings.php. It is not * necessary to set this variable unless you use MWInit::extensionSetupPath(). */ $wgExtensionsDirectory = false; /** * A list of files that should be compiled into a HipHop build, in addition to * those listed in $wgAutoloadClasses. Add to this array in an extension setup * file in order to add files to the build. * * The files listed here must either be either absolute paths under $IP or * under $wgExtensionsDirectory, or paths relative to the virtual source root * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for * extension files. */ $wgCompiledFiles = array(); /** @} */ # End of HipHop compilation } /************************************************************************//** * @name Miscellaneous * @{ */ /** Name of the external diff engine to use */ $wgExternalDiffEngine = false; /** * Disable redirects to special pages and interwiki redirects, which use a 302 * and have no "redirected from" link. Note this is only for articles with #Redirect * in them. URL's containing a local interwiki prefix (or a non-canonical special * page name) are still hard redirected regardless of this setting. */ $wgDisableHardRedirects = false; /** * LinkHolderArray batch size * For debugging */ $wgLinkHolderBatchSize = 1000; /** * By default MediaWiki does not register links pointing to same server in externallinks dataset, * use this value to override: */ $wgRegisterInternalExternals = false; /** * Maximum number of pages to move at once when moving subpages with a page. */ $wgMaximumMovedPages = 100; /** * Fix double redirects after a page move. * Tends to conflict with page move vandalism, use only on a private wiki. */ $wgFixDoubleRedirects = false; /** * Allow redirection to another page when a user logs in. * To enable, set to a string like 'Main Page' */ $wgRedirectOnLogin = null; /** * Configuration for processing pool control, for use in high-traffic wikis. * An implementation is provided in the PoolCounter extension. * * This configuration array maps pool types to an associative array. The only * defined key in the associative array is "class", which gives the class name. * The remaining elements are passed through to the class as constructor * parameters. Example: * * $wgPoolCounterConf = array( 'ArticleView' => array( * 'class' => 'PoolCounter_Client', * 'timeout' => 15, // wait timeout in seconds * 'workers' => 5, // maximum number of active threads in each pool * 'maxqueue' => 50, // maximum number of total threads in each pool * ... any extension-specific options... * ); */ $wgPoolCounterConf = null; /** * To disable file delete/restore temporarily */ $wgUploadMaintenance = false; /** * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php */ $wgEnableSelenium = false; $wgSeleniumTestConfigs = array(); $wgSeleniumConfigFile = null; $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only $wgDBtestpassword = ''; /** * For really cool vim folding this needs to be at the end: * vim: foldmarker=@{,@} foldmethod=marker * @} */