getServerVersion(); } /** * @return string Command delimiter used by this database engine */ public function getDelimiter() { return $this->delimiter; } /** * Boolean, controls output of large amounts of debug information. * @param bool|null $debug * - true to enable debugging * - false to disable debugging * - omitted or null to do nothing * * @return bool|null Previous value of the flag */ public function debug( $debug = null ) { return wfSetBit( $this->mFlags, DBO_DEBUG, $debug ); } /** * Turns buffering of SQL result sets on (true) or off (false). Default is * "on". * * Unbuffered queries are very troublesome in MySQL: * * - If another query is executed while the first query is being read * out, the first query is killed. This means you can't call normal * MediaWiki functions while you are reading an unbuffered query result * from a normal wfGetDB() connection. * * - Unbuffered queries cause the MySQL server to use large amounts of * memory and to hold broad locks which block other queries. * * If you want to limit client-side memory, it's almost always better to * split up queries into batches using a LIMIT clause than to switch off * buffering. * * @param null|bool $buffer * @return null|bool The previous value of the flag */ public function bufferResults( $buffer = null ) { if ( is_null( $buffer ) ) { return !(bool)( $this->mFlags & DBO_NOBUFFER ); } else { return !wfSetBit( $this->mFlags, DBO_NOBUFFER, !$buffer ); } } /** * Turns on (false) or off (true) the automatic generation and sending * of a "we're sorry, but there has been a database error" page on * database errors. Default is on (false). When turned off, the * code should use lastErrno() and lastError() to handle the * situation as appropriate. * * Do not use this function outside of the Database classes. * * @param null|bool $ignoreErrors * @return bool The previous value of the flag. */ protected function ignoreErrors( $ignoreErrors = null ) { return wfSetBit( $this->mFlags, DBO_IGNORE, $ignoreErrors ); } /** * Gets the current transaction level. * * Historically, transactions were allowed to be "nested". This is no * longer supported, so this function really only returns a boolean. * * @return int The previous value */ public function trxLevel() { return $this->mTrxLevel; } /** * Get the UNIX timestamp of the time that the transaction was established * * This can be used to reason about the staleness of SELECT data * in REPEATABLE-READ transaction isolation level. * * @return float|null Returns null if there is not active transaction * @since 1.25 */ public function trxTimestamp() { return $this->mTrxLevel ? $this->mTrxTimestamp : null; } /** * Get/set the table prefix. * @param string $prefix The table prefix to set, or omitted to leave it unchanged. * @return string The previous table prefix. */ public function tablePrefix( $prefix = null ) { return wfSetVar( $this->mTablePrefix, $prefix ); } /** * Get/set the db schema. * @param string $schema The database schema to set, or omitted to leave it unchanged. * @return string The previous db schema. */ public function dbSchema( $schema = null ) { return wfSetVar( $this->mSchema, $schema ); } /** * Set the filehandle to copy write statements to. * * @param resource $fh File handle */ public function setFileHandle( $fh ) { $this->fileHandle = $fh; } /** * Get properties passed down from the server info array of the load * balancer. * * @param string $name The entry of the info array to get, or null to get the * whole array * * @return array|mixed|null */ public function getLBInfo( $name = null ) { if ( is_null( $name ) ) { return $this->mLBInfo; } else { if ( array_key_exists( $name, $this->mLBInfo ) ) { return $this->mLBInfo[$name]; } else { return null; } } } /** * Set the LB info array, or a member of it. If called with one parameter, * the LB info array is set to that parameter. If it is called with two * parameters, the member with the given name is set to the given value. * * @param string $name * @param array $value */ public function setLBInfo( $name, $value = null ) { if ( is_null( $value ) ) { $this->mLBInfo = $name; } else { $this->mLBInfo[$name] = $value; } } /** * Set lag time in seconds for a fake slave * * @param mixed $lag Valid values for this parameter are determined by the * subclass, but should be a PHP scalar or array that would be sensible * as part of $wgLBFactoryConf. */ public function setFakeSlaveLag( $lag ) { } /** * Make this connection a fake master * * @param bool $enabled */ public function setFakeMaster( $enabled = true ) { } /** * @return TransactionProfiler */ protected function getTransactionProfiler() { return $this->trxProfiler ? $this->trxProfiler : Profiler::instance()->getTransactionProfiler(); } /** * Returns true if this database supports (and uses) cascading deletes * * @return bool */ public function cascadingDeletes() { return false; } /** * Returns true if this database supports (and uses) triggers (e.g. on the page table) * * @return bool */ public function cleanupTriggers() { return false; } /** * Returns true if this database is strict about what can be put into an IP field. * Specifically, it uses a NULL value instead of an empty string. * * @return bool */ public function strictIPs() { return false; } /** * Returns true if this database uses timestamps rather than integers * * @return bool */ public function realTimestamps() { return false; } /** * Returns true if this database does an implicit sort when doing GROUP BY * * @return bool */ public function implicitGroupby() { return true; } /** * Returns true if this database does an implicit order by when the column has an index * For example: SELECT page_title FROM page LIMIT 1 * * @return bool */ public function implicitOrderby() { return true; } /** * Returns true if this database can do a native search on IP columns * e.g. this works as expected: .. WHERE rc_ip = '127.42.12.102/32'; * * @return bool */ public function searchableIPs() { return false; } /** * Returns true if this database can use functional indexes * * @return bool */ public function functionalIndexes() { return false; } /** * Return the last query that went through DatabaseBase::query() * @return string */ public function lastQuery() { return $this->mLastQuery; } /** * Returns true if the connection may have been used for write queries. * Should return true if unsure. * * @return bool */ public function doneWrites() { return (bool)$this->mDoneWrites; } /** * Returns the last time the connection may have been used for write queries. * Should return a timestamp if unsure. * * @return int|float UNIX timestamp or false * @since 1.24 */ public function lastDoneWrites() { return $this->mDoneWrites ?: false; } /** * Returns true if there is a transaction open with possible write * queries or transaction pre-commit/idle callbacks waiting on it to finish. * * @return bool */ public function writesOrCallbacksPending() { return $this->mTrxLevel && ( $this->mTrxDoneWrites || $this->mTrxIdleCallbacks || $this->mTrxPreCommitCallbacks ); } /** * Get the time spend running write queries for this * * High times could be due to scanning, updates, locking, and such * * @return float|bool Returns false if not transaction is active * @since 1.26 */ public function pendingWriteQueryDuration() { return $this->mTrxLevel ? $this->mTrxWriteDuration : false; } /** * Is a connection to the database open? * @return bool */ public function isOpen() { return $this->mOpened; } /** * Set a flag for this connection * * @param int $flag DBO_* constants from Defines.php: * - DBO_DEBUG: output some debug info (same as debug()) * - DBO_NOBUFFER: don't buffer results (inverse of bufferResults()) * - DBO_TRX: automatically start transactions * - DBO_DEFAULT: automatically sets DBO_TRX if not in command line mode * and removes it in command line mode * - DBO_PERSISTENT: use persistant database connection */ public function setFlag( $flag ) { global $wgDebugDBTransactions; $this->mFlags |= $flag; if ( ( $flag & DBO_TRX ) && $wgDebugDBTransactions ) { wfDebug( "Implicit transactions are now enabled.\n" ); } } /** * Clear a flag for this connection * * @param int $flag DBO_* constants from Defines.php: * - DBO_DEBUG: output some debug info (same as debug()) * - DBO_NOBUFFER: don't buffer results (inverse of bufferResults()) * - DBO_TRX: automatically start transactions * - DBO_DEFAULT: automatically sets DBO_TRX if not in command line mode * and removes it in command line mode * - DBO_PERSISTENT: use persistant database connection */ public function clearFlag( $flag ) { global $wgDebugDBTransactions; $this->mFlags &= ~$flag; if ( ( $flag & DBO_TRX ) && $wgDebugDBTransactions ) { wfDebug( "Implicit transactions are now disabled.\n" ); } } /** * Returns a boolean whether the flag $flag is set for this connection * * @param int $flag DBO_* constants from Defines.php: * - DBO_DEBUG: output some debug info (same as debug()) * - DBO_NOBUFFER: don't buffer results (inverse of bufferResults()) * - DBO_TRX: automatically start transactions * - DBO_PERSISTENT: use persistant database connection * @return bool */ public function getFlag( $flag ) { return !!( $this->mFlags & $flag ); } /** * General read-only accessor * * @param string $name * @return string */ public function getProperty( $name ) { return $this->$name; } /** * @return string */ public function getWikiID() { if ( $this->mTablePrefix ) { return "{$this->mDBname}-{$this->mTablePrefix}"; } else { return $this->mDBname; } } /** * Return a path to the DBMS-specific SQL file if it exists, * otherwise default SQL file * * @param string $filename * @return string */ private function getSqlFilePath( $filename ) { global $IP; $dbmsSpecificFilePath = "$IP/maintenance/" . $this->getType() . "/$filename"; if ( file_exists( $dbmsSpecificFilePath ) ) { return $dbmsSpecificFilePath; } else { return "$IP/maintenance/$filename"; } } /** * Return a path to the DBMS-specific schema file, * otherwise default to tables.sql * * @return string */ public function getSchemaPath() { return $this->getSqlFilePath( 'tables.sql' ); } /** * Return a path to the DBMS-specific update key file, * otherwise default to update-keys.sql * * @return string */ public function getUpdateKeysPath() { return $this->getSqlFilePath( 'update-keys.sql' ); } /** * Get information about an index into an object * @param string $table Table name * @param string $index Index name * @param string $fname Calling function name * @return mixed Database-specific index description class or false if the index does not exist */ abstract function indexInfo( $table, $index, $fname = __METHOD__ ); /** * Wrapper for addslashes() * * @param string $s String to be slashed. * @return string Slashed string. */ abstract function strencode( $s ); /** * Constructor. * * FIXME: It is possible to construct a Database object with no associated * connection object, by specifying no parameters to __construct(). This * feature is deprecated and should be removed. * * DatabaseBase subclasses should not be constructed directly in external * code. DatabaseBase::factory() should be used instead. * * @param array $params Parameters passed from DatabaseBase::factory() */ function __construct( array $params ) { global $wgDBprefix, $wgDBmwschema, $wgCommandLineMode, $wgDebugDBTransactions; $this->mTrxAtomicLevels = new SplStack; $server = $params['host']; $user = $params['user']; $password = $params['password']; $dbName = $params['dbname']; $flags = $params['flags']; $tablePrefix = $params['tablePrefix']; $schema = $params['schema']; $foreign = $params['foreign']; $this->mFlags = $flags; if ( $this->mFlags & DBO_DEFAULT ) { if ( $wgCommandLineMode ) { $this->mFlags &= ~DBO_TRX; if ( $wgDebugDBTransactions ) { wfDebug( "Implicit transaction open disabled.\n" ); } } else { $this->mFlags |= DBO_TRX; if ( $wgDebugDBTransactions ) { wfDebug( "Implicit transaction open enabled.\n" ); } } } $this->mSessionVars = $params['variables']; /** Get the default table prefix*/ if ( $tablePrefix === 'get from global' ) { $this->mTablePrefix = $wgDBprefix; } else { $this->mTablePrefix = $tablePrefix; } /** Get the database schema*/ if ( $schema === 'get from global' ) { $this->mSchema = $wgDBmwschema; } else { $this->mSchema = $schema; } $this->mForeign = $foreign; if ( isset( $params['trxProfiler'] ) ) { $this->trxProfiler = $params['trxProfiler']; // override } if ( $user ) { $this->open( $server, $user, $password, $dbName ); } } /** * Called by serialize. Throw an exception when DB connection is serialized. * This causes problems on some database engines because the connection is * not restored on unserialize. */ public function __sleep() { throw new MWException( 'Database serialization may cause problems, since ' . 'the connection is not restored on wakeup.' ); } /** * Given a DB type, construct the name of the appropriate child class of * DatabaseBase. This is designed to replace all of the manual stuff like: * $class = 'Database' . ucfirst( strtolower( $dbType ) ); * as well as validate against the canonical list of DB types we have * * This factory function is mostly useful for when you need to connect to a * database other than the MediaWiki default (such as for external auth, * an extension, et cetera). Do not use this to connect to the MediaWiki * database. Example uses in core: * @see LoadBalancer::reallyOpenConnection() * @see ForeignDBRepo::getMasterDB() * @see WebInstallerDBConnect::execute() * * @since 1.18 * * @param string $dbType A possible DB type * @param array $p An array of options to pass to the constructor. * Valid options are: host, user, password, dbname, flags, tablePrefix, schema, driver * @throws MWException If the database driver or extension cannot be found * @return DatabaseBase|null DatabaseBase subclass or null */ final public static function factory( $dbType, $p = array() ) { $canonicalDBTypes = array( 'mysql' => array( 'mysqli', 'mysql' ), 'postgres' => array(), 'sqlite' => array(), 'oracle' => array(), 'mssql' => array(), ); $driver = false; $dbType = strtolower( $dbType ); if ( isset( $canonicalDBTypes[$dbType] ) && $canonicalDBTypes[$dbType] ) { $possibleDrivers = $canonicalDBTypes[$dbType]; if ( !empty( $p['driver'] ) ) { if ( in_array( $p['driver'], $possibleDrivers ) ) { $driver = $p['driver']; } else { throw new MWException( __METHOD__ . " cannot construct Database with type '$dbType' and driver '{$p['driver']}'" ); } } else { foreach ( $possibleDrivers as $posDriver ) { if ( extension_loaded( $posDriver ) ) { $driver = $posDriver; break; } } } } else { $driver = $dbType; } if ( $driver === false ) { throw new MWException( __METHOD__ . " no viable database extension found for type '$dbType'" ); } // Determine schema defaults. Currently Microsoft SQL Server uses $wgDBmwschema, // and everything else doesn't use a schema (e.g. null) // Although postgres and oracle support schemas, we don't use them (yet) // to maintain backwards compatibility $defaultSchemas = array( 'mssql' => 'get from global', ); $class = 'Database' . ucfirst( $driver ); if ( class_exists( $class ) && is_subclass_of( $class, 'DatabaseBase' ) ) { // Resolve some defaults for b/c $p['host'] = isset( $p['host'] ) ? $p['host'] : false; $p['user'] = isset( $p['user'] ) ? $p['user'] : false; $p['password'] = isset( $p['password'] ) ? $p['password'] : false; $p['dbname'] = isset( $p['dbname'] ) ? $p['dbname'] : false; $p['flags'] = isset( $p['flags'] ) ? $p['flags'] : 0; $p['variables'] = isset( $p['variables'] ) ? $p['variables'] : array(); $p['tablePrefix'] = isset( $p['tablePrefix'] ) ? $p['tablePrefix'] : 'get from global'; if ( !isset( $p['schema'] ) ) { $p['schema'] = isset( $defaultSchemas[$dbType] ) ? $defaultSchemas[$dbType] : null; } $p['foreign'] = isset( $p['foreign'] ) ? $p['foreign'] : false; return new $class( $p ); } else { return null; } } protected function installErrorHandler() { $this->mPHPError = false; $this->htmlErrors = ini_set( 'html_errors', '0' ); set_error_handler( array( $this, 'connectionErrorHandler' ) ); } /** * @return bool|string */ protected function restoreErrorHandler() { restore_error_handler(); if ( $this->htmlErrors !== false ) { ini_set( 'html_errors', $this->htmlErrors ); } if ( $this->mPHPError ) { $error = preg_replace( '!\[\]!', '', $this->mPHPError ); $error = preg_replace( '!^.*?:\s?(.*)$!', '$1', $error ); return $error; } else { return false; } } /** * @param int $errno * @param string $errstr */ public function connectionErrorHandler( $errno, $errstr ) { $this->mPHPError = $errstr; } /** * Create a log context to pass to wfLogDBError or other logging functions. * * @param array $extras Additional data to add to context * @return array */ protected function getLogContext( array $extras = array() ) { return array_merge( array( 'db_server' => $this->mServer, 'db_name' => $this->mDBname, 'db_user' => $this->mUser, ), $extras ); } /** * Closes a database connection. * if it is open : commits any open transactions * * @throws MWException * @return bool Operation success. true if already closed. */ public function close() { if ( count( $this->mTrxIdleCallbacks ) ) { // sanity throw new MWException( "Transaction idle callbacks still pending." ); } if ( $this->mConn ) { if ( $this->trxLevel() ) { if ( !$this->mTrxAutomatic ) { wfWarn( "Transaction still in progress (from {$this->mTrxFname}), " . " performing implicit commit before closing connection!" ); } $this->commit( __METHOD__, 'flush' ); } $closed = $this->closeConnection(); $this->mConn = false; } else { $closed = true; } $this->mOpened = false; return $closed; } /** * Make sure isOpen() returns true as a sanity check * * @throws DBUnexpectedError */ protected function assertOpen() { if ( !$this->isOpen() ) { throw new DBUnexpectedError( $this, "DB connection was already closed." ); } } /** * Closes underlying database connection * @since 1.20 * @return bool Whether connection was closed successfully */ abstract protected function closeConnection(); /** * @param string $error Fallback error message, used if none is given by DB * @throws DBConnectionError */ function reportConnectionError( $error = 'Unknown error' ) { $myError = $this->lastError(); if ( $myError ) { $error = $myError; } # New method throw new DBConnectionError( $this, $error ); } /** * The DBMS-dependent part of query() * * @param string $sql SQL query. * @return ResultWrapper|bool Result object to feed to fetchObject, * fetchRow, ...; or false on failure */ abstract protected function doQuery( $sql ); /** * Determine whether a query writes to the DB. * Should return true if unsure. * * @param string $sql * @return bool */ protected function isWriteQuery( $sql ) { return !preg_match( '/^(?:SELECT|BEGIN|ROLLBACK|COMMIT|SET|SHOW|EXPLAIN|\(SELECT)\b/i', $sql ); } /** * Determine whether a SQL statement is sensitive to isolation level. * A SQL statement is considered transactable if its result could vary * depending on the transaction isolation level. Operational commands * such as 'SET' and 'SHOW' are not considered to be transactable. * * @param string $sql * @return bool */ protected function isTransactableQuery( $sql ) { $verb = substr( $sql, 0, strcspn( $sql, " \t\r\n" ) ); return !in_array( $verb, array( 'BEGIN', 'COMMIT', 'ROLLBACK', 'SHOW', 'SET' ) ); } /** * Run an SQL query and return the result. Normally throws a DBQueryError * on failure. If errors are ignored, returns false instead. * * In new code, the query wrappers select(), insert(), update(), delete(), * etc. should be used where possible, since they give much better DBMS * independence and automatically quote or validate user input in a variety * of contexts. This function is generally only useful for queries which are * explicitly DBMS-dependent and are unsupported by the query wrappers, such * as CREATE TABLE. * * However, the query wrappers themselves should call this function. * * @param string $sql SQL query * @param string $fname Name of the calling function, for profiling/SHOW PROCESSLIST * comment (you can use __METHOD__ or add some extra info) * @param bool $tempIgnore Whether to avoid throwing an exception on errors... * maybe best to catch the exception instead? * @throws MWException * @return bool|ResultWrapper True for a successful write query, ResultWrapper object * for a successful read query, or false on failure if $tempIgnore set */ public function query( $sql, $fname = __METHOD__, $tempIgnore = false ) { global $wgUser, $wgDebugDBTransactions, $wgDebugDumpSqlLength; $this->mLastQuery = $sql; $isWriteQuery = $this->isWriteQuery( $sql ); if ( $isWriteQuery ) { if ( !$this->mDoneWrites ) { wfDebug( __METHOD__ . ': Writes done: ' . DatabaseBase::generalizeSQL( $sql ) . "\n" ); } # Set a flag indicating that writes have been done $this->mDoneWrites = microtime( true ); } # Add a comment for easy SHOW PROCESSLIST interpretation if ( is_object( $wgUser ) && $wgUser->isItemLoaded( 'name' ) ) { $userName = $wgUser->getName(); if ( mb_strlen( $userName ) > 15 ) { $userName = mb_substr( $userName, 0, 15 ) . '...'; } $userName = str_replace( '/', '', $userName ); } else { $userName = ''; } // Add trace comment to the begin of the sql string, right after the operator. // Or, for one-word queries (like "BEGIN" or COMMIT") add it to the end (bug 42598) $commentedSql = preg_replace( '/\s|$/', " /* $fname $userName */ ", $sql, 1 ); if ( !$this->mTrxLevel && $this->getFlag( DBO_TRX ) && $this->isTransactableQuery( $sql ) ) { if ( $wgDebugDBTransactions ) { wfDebug( "Implicit transaction start.\n" ); } $this->begin( __METHOD__ . " ($fname)" ); $this->mTrxAutomatic = true; } # Keep track of whether the transaction has write queries pending if ( $this->mTrxLevel && !$this->mTrxDoneWrites && $isWriteQuery ) { $this->mTrxDoneWrites = true; $this->getTransactionProfiler()->transactionWritingIn( $this->mServer, $this->mDBname, $this->mTrxShortId ); } $isMaster = !is_null( $this->getLBInfo( 'master' ) ); # generalizeSQL will probably cut down the query to reasonable # logging size most of the time. The substr is really just a sanity check. if ( $isMaster ) { $queryProf = 'query-m: ' . substr( DatabaseBase::generalizeSQL( $sql ), 0, 255 ); $totalProf = 'DatabaseBase::query-master'; } else { $queryProf = 'query: ' . substr( DatabaseBase::generalizeSQL( $sql ), 0, 255 ); $totalProf = 'DatabaseBase::query'; } # Include query transaction state $queryProf .= $this->mTrxShortId ? " [TRX#{$this->mTrxShortId}]" : ""; $profiler = Profiler::instance(); if ( !$profiler instanceof ProfilerStub ) { $totalProfSection = $profiler->scopedProfileIn( $totalProf ); $queryProfSection = $profiler->scopedProfileIn( $queryProf ); } if ( $this->debug() ) { static $cnt = 0; $cnt++; $sqlx = $wgDebugDumpSqlLength ? substr( $commentedSql, 0, $wgDebugDumpSqlLength ) : $commentedSql; $sqlx = strtr( $sqlx, "\t\n", ' ' ); $master = $isMaster ? 'master' : 'slave'; wfDebug( "Query {$this->mDBname} ($cnt) ($master): $sqlx\n" ); } $queryId = MWDebug::query( $sql, $fname, $isMaster ); # Avoid fatals if close() was called $this->assertOpen(); # Do the query and handle errors $startTime = microtime( true ); $ret = $this->doQuery( $commentedSql ); $queryRuntime = microtime( true ) - $startTime; # Log the query time and feed it into the DB trx profiler $this->getTransactionProfiler()->recordQueryCompletion( $queryProf, $startTime, $isWriteQuery, $this->affectedRows() ); MWDebug::queryTime( $queryId ); # Try reconnecting if the connection was lost if ( false === $ret && $this->wasErrorReissuable() ) { # Transaction is gone, like it or not $hadTrx = $this->mTrxLevel; // possible lost transaction $this->mTrxLevel = 0; $this->mTrxIdleCallbacks = array(); // bug 65263 $this->mTrxPreCommitCallbacks = array(); // bug 65263 wfDebug( "Connection lost, reconnecting...\n" ); # Stash the last error values since ping() might clear them $lastError = $this->lastError(); $lastErrno = $this->lastErrno(); if ( $this->ping() ) { wfDebug( "Reconnected\n" ); $server = $this->getServer(); $msg = __METHOD__ . ": lost connection to $server; reconnected"; wfDebugLog( 'DBPerformance', "$msg:\n" . wfBacktrace( true ) ); if ( $hadTrx ) { # Leave $ret as false and let an error be reported. # Callers may catch the exception and continue to use the DB. $this->reportQueryError( $lastError, $lastErrno, $sql, $fname, $tempIgnore ); } else { # Should be safe to silently retry (no trx and thus no callbacks) $startTime = microtime( true ); $ret = $this->doQuery( $commentedSql ); $queryRuntime = microtime( true ) - $startTime; # Log the query time and feed it into the DB trx profiler $this->getTransactionProfiler()->recordQueryCompletion( $queryProf, $startTime, $isWriteQuery, $this->affectedRows() ); } } else { wfDebug( "Failed\n" ); } } if ( false === $ret ) { $this->reportQueryError( $this->lastError(), $this->lastErrno(), $sql, $fname, $tempIgnore ); } $res = $this->resultObject( $ret ); // Destroy profile sections in the opposite order to their creation $queryProfSection = false; $totalProfSection = false; if ( $isWriteQuery && $this->mTrxLevel ) { $this->mTrxWriteDuration += $queryRuntime; } return $res; } /** * Report a query error. Log the error, and if neither the object ignore * flag nor the $tempIgnore flag is set, throw a DBQueryError. * * @param string $error * @param int $errno * @param string $sql * @param string $fname * @param bool $tempIgnore * @throws DBQueryError */ public function reportQueryError( $error, $errno, $sql, $fname, $tempIgnore = false ) { if ( $this->ignoreErrors() || $tempIgnore ) { wfDebug( "SQL ERROR (ignored): $error\n" ); } else { $sql1line = mb_substr( str_replace( "\n", "\\n", $sql ), 0, 5 * 1024 ); wfLogDBError( "{fname}\t{db_server}\t{errno}\t{error}\t{sql1line}", $this->getLogContext( array( 'method' => __METHOD__, 'errno' => $errno, 'error' => $error, 'sql1line' => $sql1line, 'fname' => $fname, ) ) ); wfDebug( "SQL ERROR: " . $error . "\n" ); throw new DBQueryError( $this, $error, $errno, $sql, $fname ); } } /** * Intended to be compatible with the PEAR::DB wrapper functions. * http://pear.php.net/manual/en/package.database.db.intro-execute.php * * ? = scalar value, quoted as necessary * ! = raw SQL bit (a function for instance) * & = filename; reads the file and inserts as a blob * (we don't use this though...) * * @param string $sql * @param string $func * * @return array */ protected function prepare( $sql, $func = 'DatabaseBase::prepare' ) { /* MySQL doesn't support prepared statements (yet), so just * pack up the query for reference. We'll manually replace * the bits later. */ return array( 'query' => $sql, 'func' => $func ); } /** * Free a prepared query, generated by prepare(). * @param string $prepared */ protected function freePrepared( $prepared ) { /* No-op by default */ } /** * Execute a prepared query with the various arguments * @param string $prepared The prepared sql * @param mixed $args Either an array here, or put scalars as varargs * * @return ResultWrapper */ public function execute( $prepared, $args = null ) { if ( !is_array( $args ) ) { # Pull the var args $args = func_get_args(); array_shift( $args ); } $sql = $this->fillPrepared( $prepared['query'], $args ); return $this->query( $sql, $prepared['func'] ); } /** * For faking prepared SQL statements on DBs that don't support it directly. * * @param string $preparedQuery A 'preparable' SQL statement * @param array $args Array of Arguments to fill it with * @return string Executable SQL */ public function fillPrepared( $preparedQuery, $args ) { reset( $args ); $this->preparedArgs =& $args; return preg_replace_callback( '/(\\\\[?!&]|[?!&])/', array( &$this, 'fillPreparedArg' ), $preparedQuery ); } /** * preg_callback func for fillPrepared() * The arguments should be in $this->preparedArgs and must not be touched * while we're doing this. * * @param array $matches * @throws DBUnexpectedError * @return string */ protected function fillPreparedArg( $matches ) { switch ( $matches[1] ) { case '\\?': return '?'; case '\\!': return '!'; case '\\&': return '&'; } list( /* $n */, $arg ) = each( $this->preparedArgs ); switch ( $matches[1] ) { case '?': return $this->addQuotes( $arg ); case '!': return $arg; case '&': # return $this->addQuotes( file_get_contents( $arg ) ); throw new DBUnexpectedError( $this, '& mode is not implemented. If it\'s really needed, uncomment the line above.' ); default: throw new DBUnexpectedError( $this, 'Received invalid match. This should never happen!' ); } } /** * Free a result object returned by query() or select(). It's usually not * necessary to call this, just use unset() or let the variable holding * the result object go out of scope. * * @param mixed $res A SQL result */ public function freeResult( $res ) { } /** * A SELECT wrapper which returns a single field from a single result row. * * Usually throws a DBQueryError on failure. If errors are explicitly * ignored, returns false on failure. * * If no result rows are returned from the query, false is returned. * * @param string|array $table Table name. See DatabaseBase::select() for details. * @param string $var The field name to select. This must be a valid SQL * fragment: do not use unvalidated user input. * @param string|array $cond The condition array. See DatabaseBase::select() for details. * @param string $fname The function name of the caller. * @param string|array $options The query options. See DatabaseBase::select() for details. * * @return bool|mixed The value from the field, or false on failure. */ public function selectField( $table, $var, $cond = '', $fname = __METHOD__, $options = array() ) { if ( $var === '*' ) { // sanity throw new DBUnexpectedError( $this, "Cannot use a * field: got '$var'" ); } if ( !is_array( $options ) ) { $options = array( $options ); } $options['LIMIT'] = 1; $res = $this->select( $table, $var, $cond, $fname, $options ); if ( $res === false || !$this->numRows( $res ) ) { return false; } $row = $this->fetchRow( $res ); if ( $row !== false ) { return reset( $row ); } else { return false; } } /** * A SELECT wrapper which returns a list of single field values from result rows. * * Usually throws a DBQueryError on failure. If errors are explicitly * ignored, returns false on failure. * * If no result rows are returned from the query, false is returned. * * @param string|array $table Table name. See DatabaseBase::select() for details. * @param string $var The field name to select. This must be a valid SQL * fragment: do not use unvalidated user input. * @param string|array $cond The condition array. See DatabaseBase::select() for details. * @param string $fname The function name of the caller. * @param string|array $options The query options. See DatabaseBase::select() for details. * * @return bool|array The values from the field, or false on failure * @throws DBUnexpectedError * @since 1.25 */ public function selectFieldValues( $table, $var, $cond = '', $fname = __METHOD__, $options = array() ) { if ( $var === '*' ) { // sanity throw new DBUnexpectedError( $this, "Cannot use a * field: got '$var'" ); } if ( !is_array( $options ) ) { $options = array( $options ); } $res = $this->select( $table, $var, $cond, $fname, $options ); if ( $res === false ) { return false; } $values = array(); foreach ( $res as $row ) { $values[] = $row->$var; } return $values; } /** * Returns an optional USE INDEX clause to go after the table, and a * string to go at the end of the query. * * @param array $options Associative array of options to be turned into * an SQL query, valid keys are listed in the function. * @return array * @see DatabaseBase::select() */ public function makeSelectOptions( $options ) { $preLimitTail = $postLimitTail = ''; $startOpts = ''; $noKeyOptions = array(); foreach ( $options as $key => $option ) { if ( is_numeric( $key ) ) { $noKeyOptions[$option] = true; } } $preLimitTail .= $this->makeGroupByWithHaving( $options ); $preLimitTail .= $this->makeOrderBy( $options ); // if (isset($options['LIMIT'])) { // $tailOpts .= $this->limitResult('', $options['LIMIT'], // isset($options['OFFSET']) ? $options['OFFSET'] // : false); // } if ( isset( $noKeyOptions['FOR UPDATE'] ) ) { $postLimitTail .= ' FOR UPDATE'; } if ( isset( $noKeyOptions['LOCK IN SHARE MODE'] ) ) { $postLimitTail .= ' LOCK IN SHARE MODE'; } if ( isset( $noKeyOptions['DISTINCT'] ) || isset( $noKeyOptions['DISTINCTROW'] ) ) { $startOpts .= 'DISTINCT'; } # Various MySQL extensions if ( isset( $noKeyOptions['STRAIGHT_JOIN'] ) ) { $startOpts .= ' /*! STRAIGHT_JOIN */'; } if ( isset( $noKeyOptions['HIGH_PRIORITY'] ) ) { $startOpts .= ' HIGH_PRIORITY'; } if ( isset( $noKeyOptions['SQL_BIG_RESULT'] ) ) { $startOpts .= ' SQL_BIG_RESULT'; } if ( isset( $noKeyOptions['SQL_BUFFER_RESULT'] ) ) { $startOpts .= ' SQL_BUFFER_RESULT'; } if ( isset( $noKeyOptions['SQL_SMALL_RESULT'] ) ) { $startOpts .= ' SQL_SMALL_RESULT'; } if ( isset( $noKeyOptions['SQL_CALC_FOUND_ROWS'] ) ) { $startOpts .= ' SQL_CALC_FOUND_ROWS'; } if ( isset( $noKeyOptions['SQL_CACHE'] ) ) { $startOpts .= ' SQL_CACHE'; } if ( isset( $noKeyOptions['SQL_NO_CACHE'] ) ) { $startOpts .= ' SQL_NO_CACHE'; } if ( isset( $options['USE INDEX'] ) && is_string( $options['USE INDEX'] ) ) { $useIndex = $this->useIndexClause( $options['USE INDEX'] ); } else { $useIndex = ''; } return array( $startOpts, $useIndex, $preLimitTail, $postLimitTail ); } /** * Returns an optional GROUP BY with an optional HAVING * * @param array $options Associative array of options * @return string * @see DatabaseBase::select() * @since 1.21 */ public function makeGroupByWithHaving( $options ) { $sql = ''; if ( isset( $options['GROUP BY'] ) ) { $gb = is_array( $options['GROUP BY'] ) ? implode( ',', $options['GROUP BY'] ) : $options['GROUP BY']; $sql .= ' GROUP BY ' . $gb; } if ( isset( $options['HAVING'] ) ) { $having = is_array( $options['HAVING'] ) ? $this->makeList( $options['HAVING'], LIST_AND ) : $options['HAVING']; $sql .= ' HAVING ' . $having; } return $sql; } /** * Returns an optional ORDER BY * * @param array $options Associative array of options * @return string * @see DatabaseBase::select() * @since 1.21 */ public function makeOrderBy( $options ) { if ( isset( $options['ORDER BY'] ) ) { $ob = is_array( $options['ORDER BY'] ) ? implode( ',', $options['ORDER BY'] ) : $options['ORDER BY']; return ' ORDER BY ' . $ob; } return ''; } /** * Execute a SELECT query constructed using the various parameters provided. * See below for full details of the parameters. * * @param string|array $table Table name * @param string|array $vars Field names * @param string|array $conds Conditions * @param string $fname Caller function name * @param array $options Query options * @param array $join_conds Join conditions * * * @param string|array $table * * May be either an array of table names, or a single string holding a table * name. If an array is given, table aliases can be specified, for example: * * array( 'a' => 'user' ) * * This includes the user table in the query, with the alias "a" available * for use in field names (e.g. a.user_name). * * All of the table names given here are automatically run through * DatabaseBase::tableName(), which causes the table prefix (if any) to be * added, and various other table name mappings to be performed. * * * @param string|array $vars * * May be either a field name or an array of field names. The field names * can be complete fragments of SQL, for direct inclusion into the SELECT * query. If an array is given, field aliases can be specified, for example: * * array( 'maxrev' => 'MAX(rev_id)' ) * * This includes an expression with the alias "maxrev" in the query. * * If an expression is given, care must be taken to ensure that it is * DBMS-independent. * * * @param string|array $conds * * May be either a string containing a single condition, or an array of * conditions. If an array is given, the conditions constructed from each * element are combined with AND. * * Array elements may take one of two forms: * * - Elements with a numeric key are interpreted as raw SQL fragments. * - Elements with a string key are interpreted as equality conditions, * where the key is the field name. * - If the value of such an array element is a scalar (such as a * string), it will be treated as data and thus quoted appropriately. * If it is null, an IS NULL clause will be added. * - If the value is an array, an IN (...) clause will be constructed * from its non-null elements, and an IS NULL clause will be added * if null is present, such that the field may match any of the * elements in the array. The non-null elements will be quoted. * * Note that expressions are often DBMS-dependent in their syntax. * DBMS-independent wrappers are provided for constructing several types of * expression commonly used in condition queries. See: * - DatabaseBase::buildLike() * - DatabaseBase::conditional() * * * @param string|array $options * * Optional: Array of query options. Boolean options are specified by * including them in the array as a string value with a numeric key, for * example: * * array( 'FOR UPDATE' ) * * The supported options are: * * - OFFSET: Skip this many rows at the start of the result set. OFFSET * with LIMIT can theoretically be used for paging through a result set, * but this is discouraged in MediaWiki for performance reasons. * * - LIMIT: Integer: return at most this many rows. The rows are sorted * and then the first rows are taken until the limit is reached. LIMIT * is applied to a result set after OFFSET. * * - FOR UPDATE: Boolean: lock the returned rows so that they can't be * changed until the next COMMIT. * * - DISTINCT: Boolean: return only unique result rows. * * - GROUP BY: May be either an SQL fragment string naming a field or * expression to group by, or an array of such SQL fragments. * * - HAVING: May be either an string containing a HAVING clause or an array of * conditions building the HAVING clause. If an array is given, the conditions * constructed from each element are combined with AND. * * - ORDER BY: May be either an SQL fragment giving a field name or * expression to order by, or an array of such SQL fragments. * * - USE INDEX: This may be either a string giving the index name to use * for the query, or an array. If it is an associative array, each key * gives the table name (or alias), each value gives the index name to * use for that table. All strings are SQL fragments and so should be * validated by the caller. * * - EXPLAIN: In MySQL, this causes an EXPLAIN SELECT query to be run, * instead of SELECT. * * And also the following boolean MySQL extensions, see the MySQL manual * for documentation: * * - LOCK IN SHARE MODE * - STRAIGHT_JOIN * - HIGH_PRIORITY * - SQL_BIG_RESULT * - SQL_BUFFER_RESULT * - SQL_SMALL_RESULT * - SQL_CALC_FOUND_ROWS * - SQL_CACHE * - SQL_NO_CACHE * * * @param string|array $join_conds * * Optional associative array of table-specific join conditions. In the * most common case, this is unnecessary, since the join condition can be * in $conds. However, it is useful for doing a LEFT JOIN. * * The key of the array contains the table name or alias. The value is an * array with two elements, numbered 0 and 1. The first gives the type of * join, the second is an SQL fragment giving the join condition for that * table. For example: * * array( 'page' => array( 'LEFT JOIN', 'page_latest=rev_id' ) ) * * @return ResultWrapper|bool If the query returned no rows, a ResultWrapper * with no rows in it will be returned. If there was a query error, a * DBQueryError exception will be thrown, except if the "ignore errors" * option was set, in which case false will be returned. */ public function select( $table, $vars, $conds = '', $fname = __METHOD__, $options = array(), $join_conds = array() ) { $sql = $this->selectSQLText( $table, $vars, $conds, $fname, $options, $join_conds ); return $this->query( $sql, $fname ); } /** * The equivalent of DatabaseBase::select() except that the constructed SQL * is returned, instead of being immediately executed. This can be useful for * doing UNION queries, where the SQL text of each query is needed. In general, * however, callers outside of Database classes should just use select(). * * @param string|array $table Table name * @param string|array $vars Field names * @param string|array $conds Conditions * @param string $fname Caller function name * @param string|array $options Query options * @param string|array $join_conds Join conditions * * @return string SQL query string. * @see DatabaseBase::select() */ public function selectSQLText( $table, $vars, $conds = '', $fname = __METHOD__, $options = array(), $join_conds = array() ) { if ( is_array( $vars ) ) { $vars = implode( ',', $this->fieldNamesWithAlias( $vars ) ); } $options = (array)$options; $useIndexes = ( isset( $options['USE INDEX'] ) && is_array( $options['USE INDEX'] ) ) ? $options['USE INDEX'] : array(); if ( is_array( $table ) ) { $from = ' FROM ' . $this->tableNamesWithUseIndexOrJOIN( $table, $useIndexes, $join_conds ); } elseif ( $table != '' ) { if ( $table[0] == ' ' ) { $from = ' FROM ' . $table; } else { $from = ' FROM ' . $this->tableNamesWithUseIndexOrJOIN( array( $table ), $useIndexes, array() ); } } else { $from = ''; } list( $startOpts, $useIndex, $preLimitTail, $postLimitTail ) = $this->makeSelectOptions( $options ); if ( !empty( $conds ) ) { if ( is_array( $conds ) ) { $conds = $this->makeList( $conds, LIST_AND ); } $sql = "SELECT $startOpts $vars $from $useIndex WHERE $conds $preLimitTail"; } else { $sql = "SELECT $startOpts $vars $from $useIndex $preLimitTail"; } if ( isset( $options['LIMIT'] ) ) { $sql = $this->limitResult( $sql, $options['LIMIT'], isset( $options['OFFSET'] ) ? $options['OFFSET'] : false ); } $sql = "$sql $postLimitTail"; if ( isset( $options['EXPLAIN'] ) ) { $sql = 'EXPLAIN ' . $sql; } return $sql; } /** * Single row SELECT wrapper. Equivalent to DatabaseBase::select(), except * that a single row object is returned. If the query returns no rows, * false is returned. * * @param string|array $table Table name * @param string|array $vars Field names * @param array $conds Conditions * @param string $fname Caller function name * @param string|array $options Query options * @param array|string $join_conds Join conditions * * @return stdClass|bool */ public function selectRow( $table, $vars, $conds, $fname = __METHOD__, $options = array(), $join_conds = array() ) { $options = (array)$options; $options['LIMIT'] = 1; $res = $this->select( $table, $vars, $conds, $fname, $options, $join_conds ); if ( $res === false ) { return false; } if ( !$this->numRows( $res ) ) { return false; } $obj = $this->fetchObject( $res ); return $obj; } /** * Estimate the number of rows in dataset * * MySQL allows you to estimate the number of rows that would be returned * by a SELECT query, using EXPLAIN SELECT. The estimate is provided using * index cardinality statistics, and is notoriously inaccurate, especially * when large numbers of rows have recently been added or deleted. * * For DBMSs that don't support fast result size estimation, this function * will actually perform the SELECT COUNT(*). * * Takes the same arguments as DatabaseBase::select(). * * @param string $table Table name * @param string $vars Unused * @param array|string $conds Filters on the table * @param string $fname Function name for profiling * @param array $options Options for select * @return int Row count */ public function estimateRowCount( $table, $vars = '*', $conds = '', $fname = __METHOD__, $options = array() ) { $rows = 0; $res = $this->select( $table, array( 'rowcount' => 'COUNT(*)' ), $conds, $fname, $options ); if ( $res ) { $row = $this->fetchRow( $res ); $rows = ( isset( $row['rowcount'] ) ) ? (int)$row['rowcount'] : 0; } return $rows; } /** * Get the number of rows in dataset * * This is useful when trying to do COUNT(*) but with a LIMIT for performance. * * Takes the same arguments as DatabaseBase::select(). * * @param string $table Table name * @param string $vars Unused * @param array|string $conds Filters on the table * @param string $fname Function name for profiling * @param array $options Options for select * @return int Row count * @since 1.24 */ public function selectRowCount( $table, $vars = '*', $conds = '', $fname = __METHOD__, $options = array() ) { $rows = 0; $sql = $this->selectSQLText( $table, '1', $conds, $fname, $options ); $res = $this->query( "SELECT COUNT(*) AS rowcount FROM ($sql) tmp_count", $fname ); if ( $res ) { $row = $this->fetchRow( $res ); $rows = ( isset( $row['rowcount'] ) ) ? (int)$row['rowcount'] : 0; } return $rows; } /** * Removes most variables from an SQL query and replaces them with X or N for numbers. * It's only slightly flawed. Don't use for anything important. * * @param string $sql A SQL Query * * @return string */ static function generalizeSQL( $sql ) { # This does the same as the regexp below would do, but in such a way # as to avoid crashing php on some large strings. # $sql = preg_replace( "/'([^\\\\']|\\\\.)*'|\"([^\\\\\"]|\\\\.)*\"/", "'X'", $sql ); $sql = str_replace( "\\\\", '', $sql ); $sql = str_replace( "\\'", '', $sql ); $sql = str_replace( "\\\"", '', $sql ); $sql = preg_replace( "/'.*'/s", "'X'", $sql ); $sql = preg_replace( '/".*"/s', "'X'", $sql ); # All newlines, tabs, etc replaced by single space $sql = preg_replace( '/\s+/', ' ', $sql ); # All numbers => N, # except the ones surrounded by characters, e.g. l10n $sql = preg_replace( '/-?\d+(,-?\d+)+/s', 'N,...,N', $sql ); $sql = preg_replace( '/(?fieldInfo( $table, $field ); return (bool)$info; } /** * Determines whether an index exists * Usually throws a DBQueryError on failure * If errors are explicitly ignored, returns NULL on failure * * @param string $table * @param string $index * @param string $fname * @return bool|null */ public function indexExists( $table, $index, $fname = __METHOD__ ) { if ( !$this->tableExists( $table ) ) { return null; } $info = $this->indexInfo( $table, $index, $fname ); if ( is_null( $info ) ) { return null; } else { return $info !== false; } } /** * Query whether a given table exists * * @param string $table * @param string $fname * @return bool */ public function tableExists( $table, $fname = __METHOD__ ) { $table = $this->tableName( $table ); $old = $this->ignoreErrors( true ); $res = $this->query( "SELECT 1 FROM $table LIMIT 1", $fname ); $this->ignoreErrors( $old ); return (bool)$res; } /** * Determines if a given index is unique * * @param string $table * @param string $index * * @return bool */ public function indexUnique( $table, $index ) { $indexInfo = $this->indexInfo( $table, $index ); if ( !$indexInfo ) { return null; } return !$indexInfo[0]->Non_unique; } /** * Helper for DatabaseBase::insert(). * * @param array $options * @return string */ protected function makeInsertOptions( $options ) { return implode( ' ', $options ); } /** * INSERT wrapper, inserts an array into a table. * * $a may be either: * * - A single associative array. The array keys are the field names, and * the values are the values to insert. The values are treated as data * and will be quoted appropriately. If NULL is inserted, this will be * converted to a database NULL. * - An array with numeric keys, holding a list of associative arrays. * This causes a multi-row INSERT on DBMSs that support it. The keys in * each subarray must be identical to each other, and in the same order. * * $options is an array of options, with boolean options encoded as values * with numeric keys, in the same style as $options in * DatabaseBase::select(). Supported options are: * * - IGNORE: Boolean: if present, duplicate key errors are ignored, and * any rows which cause duplicate key errors are not inserted. It's * possible to determine how many rows were successfully inserted using * DatabaseBase::affectedRows(). * * @param string $table Table name. This will be passed through * DatabaseBase::tableName(). * @param array $a Array of rows to insert * @param string $fname Calling function name (use __METHOD__) for logs/profiling * @param array $options Array of options * * @throws DBQueryError Usually throws a DBQueryError on failure. If errors are explicitly ignored, * returns success. * * @return bool */ public function insert( $table, $a, $fname = __METHOD__, $options = array() ) { # No rows to insert, easy just return now if ( !count( $a ) ) { return true; } $table = $this->tableName( $table ); if ( !is_array( $options ) ) { $options = array( $options ); } $fh = null; if ( isset( $options['fileHandle'] ) ) { $fh = $options['fileHandle']; } $options = $this->makeInsertOptions( $options ); if ( isset( $a[0] ) && is_array( $a[0] ) ) { $multi = true; $keys = array_keys( $a[0] ); } else { $multi = false; $keys = array_keys( $a ); } $sql = 'INSERT ' . $options . " INTO $table (" . implode( ',', $keys ) . ') VALUES '; if ( $multi ) { $first = true; foreach ( $a as $row ) { if ( $first ) { $first = false; } else { $sql .= ','; } $sql .= '(' . $this->makeList( $row ) . ')'; } } else { $sql .= '(' . $this->makeList( $a ) . ')'; } if ( $fh !== null && false === fwrite( $fh, $sql ) ) { return false; } elseif ( $fh !== null ) { return true; } return (bool)$this->query( $sql, $fname ); } /** * Make UPDATE options array for DatabaseBase::makeUpdateOptions * * @param array $options * @return array */ protected function makeUpdateOptionsArray( $options ) { if ( !is_array( $options ) ) { $options = array( $options ); } $opts = array(); if ( in_array( 'LOW_PRIORITY', $options ) ) { $opts[] = $this->lowPriorityOption(); } if ( in_array( 'IGNORE', $options ) ) { $opts[] = 'IGNORE'; } return $opts; } /** * Make UPDATE options for the DatabaseBase::update function * * @param array $options The options passed to DatabaseBase::update * @return string */ protected function makeUpdateOptions( $options ) { $opts = $this->makeUpdateOptionsArray( $options ); return implode( ' ', $opts ); } /** * UPDATE wrapper. Takes a condition array and a SET array. * * @param string $table Name of the table to UPDATE. This will be passed through * DatabaseBase::tableName(). * @param array $values An array of values to SET. For each array element, * the key gives the field name, and the value gives the data to set * that field to. The data will be quoted by DatabaseBase::addQuotes(). * @param array $conds An array of conditions (WHERE). See * DatabaseBase::select() for the details of the format of condition * arrays. Use '*' to update all rows. * @param string $fname The function name of the caller (from __METHOD__), * for logging and profiling. * @param array $options An array of UPDATE options, can be: * - IGNORE: Ignore unique key conflicts * - LOW_PRIORITY: MySQL-specific, see MySQL manual. * @return bool */ function update( $table, $values, $conds, $fname = __METHOD__, $options = array() ) { $table = $this->tableName( $table ); $opts = $this->makeUpdateOptions( $options ); $sql = "UPDATE $opts $table SET " . $this->makeList( $values, LIST_SET ); if ( $conds !== array() && $conds !== '*' ) { $sql .= " WHERE " . $this->makeList( $conds, LIST_AND ); } return $this->query( $sql, $fname ); } /** * Makes an encoded list of strings from an array * * @param array $a Containing the data * @param int $mode Constant * - LIST_COMMA: Comma separated, no field names * - LIST_AND: ANDed WHERE clause (without the WHERE). See the * documentation for $conds in DatabaseBase::select(). * - LIST_OR: ORed WHERE clause (without the WHERE) * - LIST_SET: Comma separated with field names, like a SET clause * - LIST_NAMES: Comma separated field names * @throws MWException|DBUnexpectedError * @return string */ public function makeList( $a, $mode = LIST_COMMA ) { if ( !is_array( $a ) ) { throw new DBUnexpectedError( $this, 'DatabaseBase::makeList called with incorrect parameters' ); } $first = true; $list = ''; foreach ( $a as $field => $value ) { if ( !$first ) { if ( $mode == LIST_AND ) { $list .= ' AND '; } elseif ( $mode == LIST_OR ) { $list .= ' OR '; } else { $list .= ','; } } else { $first = false; } if ( ( $mode == LIST_AND || $mode == LIST_OR ) && is_numeric( $field ) ) { $list .= "($value)"; } elseif ( ( $mode == LIST_SET ) && is_numeric( $field ) ) { $list .= "$value"; } elseif ( ( $mode == LIST_AND || $mode == LIST_OR ) && is_array( $value ) ) { // Remove null from array to be handled separately if found $includeNull = false; foreach ( array_keys( $value, null, true ) as $nullKey ) { $includeNull = true; unset( $value[$nullKey] ); } if ( count( $value ) == 0 && !$includeNull ) { throw new MWException( __METHOD__ . ": empty input for field $field" ); } elseif ( count( $value ) == 0 ) { // only check if $field is null $list .= "$field IS NULL"; } else { // IN clause contains at least one valid element if ( $includeNull ) { // Group subconditions to ensure correct precedence $list .= '('; } if ( count( $value ) == 1 ) { // Special-case single values, as IN isn't terribly efficient // Don't necessarily assume the single key is 0; we don't // enforce linear numeric ordering on other arrays here. $value = array_values( $value ); $list .= $field . " = " . $this->addQuotes( $value[0] ); } else { $list .= $field . " IN (" . $this->makeList( $value ) . ") "; } // if null present in array, append IS NULL if ( $includeNull ) { $list .= " OR $field IS NULL)"; } } } elseif ( $value === null ) { if ( $mode == LIST_AND || $mode == LIST_OR ) { $list .= "$field IS "; } elseif ( $mode == LIST_SET ) { $list .= "$field = "; } $list .= 'NULL'; } else { if ( $mode == LIST_AND || $mode == LIST_OR || $mode == LIST_SET ) { $list .= "$field = "; } $list .= $mode == LIST_NAMES ? $value : $this->addQuotes( $value ); } } return $list; } /** * Build a partial where clause from a 2-d array such as used for LinkBatch. * The keys on each level may be either integers or strings. * * @param array $data Organized as 2-d * array(baseKeyVal => array(subKeyVal => [ignored], ...), ...) * @param string $baseKey Field name to match the base-level keys to (eg 'pl_namespace') * @param string $subKey Field name to match the sub-level keys to (eg 'pl_title') * @return string|bool SQL fragment, or false if no items in array */ public function makeWhereFrom2d( $data, $baseKey, $subKey ) { $conds = array(); foreach ( $data as $base => $sub ) { if ( count( $sub ) ) { $conds[] = $this->makeList( array( $baseKey => $base, $subKey => array_keys( $sub ) ), LIST_AND ); } } if ( $conds ) { return $this->makeList( $conds, LIST_OR ); } else { // Nothing to search for... return false; } } /** * Return aggregated value alias * * @param array $valuedata * @param string $valuename * * @return string */ public function aggregateValue( $valuedata, $valuename = 'value' ) { return $valuename; } /** * @param string $field * @return string */ public function bitNot( $field ) { return "(~$field)"; } /** * @param string $fieldLeft * @param string $fieldRight * @return string */ public function bitAnd( $fieldLeft, $fieldRight ) { return "($fieldLeft & $fieldRight)"; } /** * @param string $fieldLeft * @param string $fieldRight * @return string */ public function bitOr( $fieldLeft, $fieldRight ) { return "($fieldLeft | $fieldRight)"; } /** * Build a concatenation list to feed into a SQL query * @param array $stringList List of raw SQL expressions; caller is * responsible for any quoting * @return string */ public function buildConcat( $stringList ) { return 'CONCAT(' . implode( ',', $stringList ) . ')'; } /** * Build a GROUP_CONCAT or equivalent statement for a query. * * This is useful for combining a field for several rows into a single string. * NULL values will not appear in the output, duplicated values will appear, * and the resulting delimiter-separated values have no defined sort order. * Code using the results may need to use the PHP unique() or sort() methods. * * @param string $delim Glue to bind the results together * @param string|array $table Table name * @param string $field Field name * @param string|array $conds Conditions * @param string|array $join_conds Join conditions * @return string SQL text * @since 1.23 */ public function buildGroupConcatField( $delim, $table, $field, $conds = '', $join_conds = array() ) { $fld = "GROUP_CONCAT($field SEPARATOR " . $this->addQuotes( $delim ) . ')'; return '(' . $this->selectSQLText( $table, $fld, $conds, null, array(), $join_conds ) . ')'; } /** * Change the current database * * @todo Explain what exactly will fail if this is not overridden. * * @param string $db * * @return bool Success or failure */ public function selectDB( $db ) { # Stub. Shouldn't cause serious problems if it's not overridden, but # if your database engine supports a concept similar to MySQL's # databases you may as well. $this->mDBname = $db; return true; } /** * Get the current DB name * @return string */ public function getDBname() { return $this->mDBname; } /** * Get the server hostname or IP address * @return string */ public function getServer() { return $this->mServer; } /** * Format a table name ready for use in constructing an SQL query * * This does two important things: it quotes the table names to clean them up, * and it adds a table prefix if only given a table name with no quotes. * * All functions of this object which require a table name call this function * themselves. Pass the canonical name to such functions. This is only needed * when calling query() directly. * * @param string $name Database table name * @param string $format One of: * quoted - Automatically pass the table name through addIdentifierQuotes() * so that it can be used in a query. * raw - Do not add identifier quotes to the table name * @return string Full database name */ public function tableName( $name, $format = 'quoted' ) { global $wgSharedDB, $wgSharedPrefix, $wgSharedTables, $wgSharedSchema; # Skip the entire process when we have a string quoted on both ends. # Note that we check the end so that we will still quote any use of # use of `database`.table. But won't break things if someone wants # to query a database table with a dot in the name. if ( $this->isQuotedIdentifier( $name ) ) { return $name; } # Lets test for any bits of text that should never show up in a table # name. Basically anything like JOIN or ON which are actually part of # SQL queries, but may end up inside of the table value to combine # sql. Such as how the API is doing. # Note that we use a whitespace test rather than a \b test to avoid # any remote case where a word like on may be inside of a table name # surrounded by symbols which may be considered word breaks. if ( preg_match( '/(^|\s)(DISTINCT|JOIN|ON|AS)(\s|$)/i', $name ) !== 0 ) { return $name; } # Split database and table into proper variables. # We reverse the explode so that database.table and table both output # the correct table. $dbDetails = explode( '.', $name, 3 ); if ( count( $dbDetails ) == 3 ) { list( $database, $schema, $table ) = $dbDetails; # We don't want any prefix added in this case $prefix = ''; } elseif ( count( $dbDetails ) == 2 ) { list( $database, $table ) = $dbDetails; # We don't want any prefix added in this case # In dbs that support it, $database may actually be the schema # but that doesn't affect any of the functionality here $prefix = ''; $schema = null; } else { list( $table ) = $dbDetails; if ( $wgSharedDB !== null # We have a shared database && $this->mForeign == false # We're not working on a foreign database && !$this->isQuotedIdentifier( $table ) # Prevent shared tables listing '`table`' && in_array( $table, $wgSharedTables ) # A shared table is selected ) { $database = $wgSharedDB; $schema = $wgSharedSchema === null ? $this->mSchema : $wgSharedSchema; $prefix = $wgSharedPrefix === null ? $this->mTablePrefix : $wgSharedPrefix; } else { $database = null; $schema = $this->mSchema; # Default schema $prefix = $this->mTablePrefix; # Default prefix } } # Quote $table and apply the prefix if not quoted. # $tableName might be empty if this is called from Database::replaceVars() $tableName = "{$prefix}{$table}"; if ( $format == 'quoted' && !$this->isQuotedIdentifier( $tableName ) && $tableName !== '' ) { $tableName = $this->addIdentifierQuotes( $tableName ); } # Quote $schema and merge it with the table name if needed if ( strlen( $schema ) ) { if ( $format == 'quoted' && !$this->isQuotedIdentifier( $schema ) ) { $schema = $this->addIdentifierQuotes( $schema ); } $tableName = $schema . '.' . $tableName; } # Quote $database and merge it with the table name if needed if ( $database !== null ) { if ( $format == 'quoted' && !$this->isQuotedIdentifier( $database ) ) { $database = $this->addIdentifierQuotes( $database ); } $tableName = $database . '.' . $tableName; } return $tableName; } /** * Fetch a number of table names into an array * This is handy when you need to construct SQL for joins * * Example: * extract( $dbr->tableNames( 'user', 'watchlist' ) ); * $sql = "SELECT wl_namespace,wl_title FROM $watchlist,$user * WHERE wl_user=user_id AND wl_user=$nameWithQuotes"; * * @return array */ public function tableNames() { $inArray = func_get_args(); $retVal = array(); foreach ( $inArray as $name ) { $retVal[$name] = $this->tableName( $name ); } return $retVal; } /** * Fetch a number of table names into an zero-indexed numerical array * This is handy when you need to construct SQL for joins * * Example: * list( $user, $watchlist ) = $dbr->tableNamesN( 'user', 'watchlist' ); * $sql = "SELECT wl_namespace,wl_title FROM $watchlist,$user * WHERE wl_user=user_id AND wl_user=$nameWithQuotes"; * * @return array */ public function tableNamesN() { $inArray = func_get_args(); $retVal = array(); foreach ( $inArray as $name ) { $retVal[] = $this->tableName( $name ); } return $retVal; } /** * Get an aliased table name * e.g. tableName AS newTableName * * @param string $name Table name, see tableName() * @param string|bool $alias Alias (optional) * @return string SQL name for aliased table. Will not alias a table to its own name */ public function tableNameWithAlias( $name, $alias = false ) { if ( !$alias || $alias == $name ) { return $this->tableName( $name ); } else { return $this->tableName( $name ) . ' ' . $this->addIdentifierQuotes( $alias ); } } /** * Gets an array of aliased table names * * @param array $tables Array( [alias] => table ) * @return string[] See tableNameWithAlias() */ public function tableNamesWithAlias( $tables ) { $retval = array(); foreach ( $tables as $alias => $table ) { if ( is_numeric( $alias ) ) { $alias = $table; } $retval[] = $this->tableNameWithAlias( $table, $alias ); } return $retval; } /** * Get an aliased field name * e.g. fieldName AS newFieldName * * @param string $name Field name * @param string|bool $alias Alias (optional) * @return string SQL name for aliased field. Will not alias a field to its own name */ public function fieldNameWithAlias( $name, $alias = false ) { if ( !$alias || (string)$alias === (string)$name ) { return $name; } else { return $name . ' AS ' . $alias; //PostgreSQL needs AS } } /** * Gets an array of aliased field names * * @param array $fields Array( [alias] => field ) * @return string[] See fieldNameWithAlias() */ public function fieldNamesWithAlias( $fields ) { $retval = array(); foreach ( $fields as $alias => $field ) { if ( is_numeric( $alias ) ) { $alias = $field; } $retval[] = $this->fieldNameWithAlias( $field, $alias ); } return $retval; } /** * Get the aliased table name clause for a FROM clause * which might have a JOIN and/or USE INDEX clause * * @param array $tables ( [alias] => table ) * @param array $use_index Same as for select() * @param array $join_conds Same as for select() * @return string */ protected function tableNamesWithUseIndexOrJOIN( $tables, $use_index = array(), $join_conds = array() ) { $ret = array(); $retJOIN = array(); $use_index = (array)$use_index; $join_conds = (array)$join_conds; foreach ( $tables as $alias => $table ) { if ( !is_string( $alias ) ) { // No alias? Set it equal to the table name $alias = $table; } // Is there a JOIN clause for this table? if ( isset( $join_conds[$alias] ) ) { list( $joinType, $conds ) = $join_conds[$alias]; $tableClause = $joinType; $tableClause .= ' ' . $this->tableNameWithAlias( $table, $alias ); if ( isset( $use_index[$alias] ) ) { // has USE INDEX? $use = $this->useIndexClause( implode( ',', (array)$use_index[$alias] ) ); if ( $use != '' ) { $tableClause .= ' ' . $use; } } $on = $this->makeList( (array)$conds, LIST_AND ); if ( $on != '' ) { $tableClause .= ' ON (' . $on . ')'; } $retJOIN[] = $tableClause; } elseif ( isset( $use_index[$alias] ) ) { // Is there an INDEX clause for this table? $tableClause = $this->tableNameWithAlias( $table, $alias ); $tableClause .= ' ' . $this->useIndexClause( implode( ',', (array)$use_index[$alias] ) ); $ret[] = $tableClause; } else { $tableClause = $this->tableNameWithAlias( $table, $alias ); $ret[] = $tableClause; } } // We can't separate explicit JOIN clauses with ',', use ' ' for those $implicitJoins = !empty( $ret ) ? implode( ',', $ret ) : ""; $explicitJoins = !empty( $retJOIN ) ? implode( ' ', $retJOIN ) : ""; // Compile our final table clause return implode( ' ', array( $implicitJoins, $explicitJoins ) ); } /** * Get the name of an index in a given table. * * @protected Don't use outside of DatabaseBase and childs * @param string $index * @return string */ public function indexName( $index ) { // @FIXME: Make this protected once we move away from PHP 5.3 // Needs to be public because of usage in closure (in DatabaseBase::replaceVars) // Backwards-compatibility hack $renamed = array( 'ar_usertext_timestamp' => 'usertext_timestamp', 'un_user_id' => 'user_id', 'un_user_ip' => 'user_ip', ); if ( isset( $renamed[$index] ) ) { return $renamed[$index]; } else { return $index; } } /** * Adds quotes and backslashes. * * @param string|Blob $s * @return string */ public function addQuotes( $s ) { if ( $s instanceof Blob ) { $s = $s->fetch(); } if ( $s === null ) { return 'NULL'; } else { # This will also quote numeric values. This should be harmless, # and protects against weird problems that occur when they really # _are_ strings such as article titles and string->number->string # conversion is not 1:1. return "'" . $this->strencode( $s ) . "'"; } } /** * Quotes an identifier using `backticks` or "double quotes" depending on the database type. * MySQL uses `backticks` while basically everything else uses double quotes. * Since MySQL is the odd one out here the double quotes are our generic * and we implement backticks in DatabaseMysql. * * @param string $s * @return string */ public function addIdentifierQuotes( $s ) { return '"' . str_replace( '"', '""', $s ) . '"'; } /** * Returns if the given identifier looks quoted or not according to * the database convention for quoting identifiers . * * @param string $name * @return bool */ public function isQuotedIdentifier( $name ) { return $name[0] == '"' && substr( $name, -1, 1 ) == '"'; } /** * @param string $s * @return string */ protected function escapeLikeInternal( $s ) { return addcslashes( $s, '\%_' ); } /** * LIKE statement wrapper, receives a variable-length argument list with * parts of pattern to match containing either string literals that will be * escaped or tokens returned by anyChar() or anyString(). Alternatively, * the function could be provided with an array of aforementioned * parameters. * * Example: $dbr->buildLike( 'My_page_title/', $dbr->anyString() ) returns * a LIKE clause that searches for subpages of 'My page title'. * Alternatively: * $pattern = array( 'My_page_title/', $dbr->anyString() ); * $query .= $dbr->buildLike( $pattern ); * * @since 1.16 * @return string Fully built LIKE statement */ public function buildLike() { $params = func_get_args(); if ( count( $params ) > 0 && is_array( $params[0] ) ) { $params = $params[0]; } $s = ''; foreach ( $params as $value ) { if ( $value instanceof LikeMatch ) { $s .= $value->toString(); } else { $s .= $this->escapeLikeInternal( $value ); } } return " LIKE {$this->addQuotes( $s )} "; } /** * Returns a token for buildLike() that denotes a '_' to be used in a LIKE query * * @return LikeMatch */ public function anyChar() { return new LikeMatch( '_' ); } /** * Returns a token for buildLike() that denotes a '%' to be used in a LIKE query * * @return LikeMatch */ public function anyString() { return new LikeMatch( '%' ); } /** * Returns an appropriately quoted sequence value for inserting a new row. * MySQL has autoincrement fields, so this is just NULL. But the PostgreSQL * subclass will return an integer, and save the value for insertId() * * Any implementation of this function should *not* involve reusing * sequence numbers created for rolled-back transactions. * See http://bugs.mysql.com/bug.php?id=30767 for details. * @param string $seqName * @return null|int */ public function nextSequenceValue( $seqName ) { return null; } /** * USE INDEX clause. Unlikely to be useful for anything but MySQL. This * is only needed because a) MySQL must be as efficient as possible due to * its use on Wikipedia, and b) MySQL 4.0 is kind of dumb sometimes about * which index to pick. Anyway, other databases might have different * indexes on a given table. So don't bother overriding this unless you're * MySQL. * @param string $index * @return string */ public function useIndexClause( $index ) { return ''; } /** * REPLACE query wrapper. * * REPLACE is a very handy MySQL extension, which functions like an INSERT * except that when there is a duplicate key error, the old row is deleted * and the new row is inserted in its place. * * We simulate this with standard SQL with a DELETE followed by INSERT. To * perform the delete, we need to know what the unique indexes are so that * we know how to find the conflicting rows. * * It may be more efficient to leave off unique indexes which are unlikely * to collide. However if you do this, you run the risk of encountering * errors which wouldn't have occurred in MySQL. * * @param string $table The table to replace the row(s) in. * @param array $uniqueIndexes Is an array of indexes. Each element may be either * a field name or an array of field names * @param array $rows Can be either a single row to insert, or multiple rows, * in the same format as for DatabaseBase::insert() * @param string $fname Calling function name (use __METHOD__) for logs/profiling */ public function replace( $table, $uniqueIndexes, $rows, $fname = __METHOD__ ) { $quotedTable = $this->tableName( $table ); if ( count( $rows ) == 0 ) { return; } # Single row case if ( !is_array( reset( $rows ) ) ) { $rows = array( $rows ); } // @FXIME: this is not atomic, but a trx would break affectedRows() foreach ( $rows as $row ) { # Delete rows which collide if ( $uniqueIndexes ) { $sql = "DELETE FROM $quotedTable WHERE "; $first = true; foreach ( $uniqueIndexes as $index ) { if ( $first ) { $first = false; $sql .= '( '; } else { $sql .= ' ) OR ( '; } if ( is_array( $index ) ) { $first2 = true; foreach ( $index as $col ) { if ( $first2 ) { $first2 = false; } else { $sql .= ' AND '; } $sql .= $col . '=' . $this->addQuotes( $row[$col] ); } } else { $sql .= $index . '=' . $this->addQuotes( $row[$index] ); } } $sql .= ' )'; $this->query( $sql, $fname ); } # Now insert the row $this->insert( $table, $row, $fname ); } } /** * REPLACE query wrapper for MySQL and SQLite, which have a native REPLACE * statement. * * @param string $table Table name * @param array|string $rows Row(s) to insert * @param string $fname Caller function name * * @return ResultWrapper */ protected function nativeReplace( $table, $rows, $fname ) { $table = $this->tableName( $table ); # Single row case if ( !is_array( reset( $rows ) ) ) { $rows = array( $rows ); } $sql = "REPLACE INTO $table (" . implode( ',', array_keys( $rows[0] ) ) . ') VALUES '; $first = true; foreach ( $rows as $row ) { if ( $first ) { $first = false; } else { $sql .= ','; } $sql .= '(' . $this->makeList( $row ) . ')'; } return $this->query( $sql, $fname ); } /** * INSERT ON DUPLICATE KEY UPDATE wrapper, upserts an array into a table. * * This updates any conflicting rows (according to the unique indexes) using * the provided SET clause and inserts any remaining (non-conflicted) rows. * * $rows may be either: * - A single associative array. The array keys are the field names, and * the values are the values to insert. The values are treated as data * and will be quoted appropriately. If NULL is inserted, this will be * converted to a database NULL. * - An array with numeric keys, holding a list of associative arrays. * This causes a multi-row INSERT on DBMSs that support it. The keys in * each subarray must be identical to each other, and in the same order. * * It may be more efficient to leave off unique indexes which are unlikely * to collide. However if you do this, you run the risk of encountering * errors which wouldn't have occurred in MySQL. * * Usually throws a DBQueryError on failure. If errors are explicitly ignored, * returns success. * * @since 1.22 * * @param string $table Table name. This will be passed through DatabaseBase::tableName(). * @param array $rows A single row or list of rows to insert * @param array $uniqueIndexes List of single field names or field name tuples * @param array $set An array of values to SET. For each array element, the * key gives the field name, and the value gives the data to set that * field to. The data will be quoted by DatabaseBase::addQuotes(). * @param string $fname Calling function name (use __METHOD__) for logs/profiling * @throws Exception * @return bool */ public function upsert( $table, array $rows, array $uniqueIndexes, array $set, $fname = __METHOD__ ) { if ( !count( $rows ) ) { return true; // nothing to do } if ( !is_array( reset( $rows ) ) ) { $rows = array( $rows ); } if ( count( $uniqueIndexes ) ) { $clauses = array(); // list WHERE clauses that each identify a single row foreach ( $rows as $row ) { foreach ( $uniqueIndexes as $index ) { $index = is_array( $index ) ? $index : array( $index ); // columns $rowKey = array(); // unique key to this row foreach ( $index as $column ) { $rowKey[$column] = $row[$column]; } $clauses[] = $this->makeList( $rowKey, LIST_AND ); } } $where = array( $this->makeList( $clauses, LIST_OR ) ); } else { $where = false; } $useTrx = !$this->mTrxLevel; if ( $useTrx ) { $this->begin( $fname ); } try { # Update any existing conflicting row(s) if ( $where !== false ) { $ok = $this->update( $table, $set, $where, $fname ); } else { $ok = true; } # Now insert any non-conflicting row(s) $ok = $this->insert( $table, $rows, $fname, array( 'IGNORE' ) ) && $ok; } catch ( Exception $e ) { if ( $useTrx ) { $this->rollback( $fname ); } throw $e; } if ( $useTrx ) { $this->commit( $fname ); } return $ok; } /** * DELETE where the condition is a join. * * MySQL overrides this to use a multi-table DELETE syntax, in other databases * we use sub-selects * * For safety, an empty $conds will not delete everything. If you want to * delete all rows where the join condition matches, set $conds='*'. * * DO NOT put the join condition in $conds. * * @param string $delTable The table to delete from. * @param string $joinTable The other table. * @param string $delVar The variable to join on, in the first table. * @param string $joinVar The variable to join on, in the second table. * @param array $conds Condition array of field names mapped to variables, * ANDed together in the WHERE clause * @param string $fname Calling function name (use __METHOD__) for logs/profiling * @throws DBUnexpectedError */ public function deleteJoin( $delTable, $joinTable, $delVar, $joinVar, $conds, $fname = __METHOD__ ) { if ( !$conds ) { throw new DBUnexpectedError( $this, 'DatabaseBase::deleteJoin() called with empty $conds' ); } $delTable = $this->tableName( $delTable ); $joinTable = $this->tableName( $joinTable ); $sql = "DELETE FROM $delTable WHERE $delVar IN (SELECT $joinVar FROM $joinTable "; if ( $conds != '*' ) { $sql .= 'WHERE ' . $this->makeList( $conds, LIST_AND ); } $sql .= ')'; $this->query( $sql, $fname ); } /** * Returns the size of a text field, or -1 for "unlimited" * * @param string $table * @param string $field * @return int */ public function textFieldSize( $table, $field ) { $table = $this->tableName( $table ); $sql = "SHOW COLUMNS FROM $table LIKE \"$field\";"; $res = $this->query( $sql, 'DatabaseBase::textFieldSize' ); $row = $this->fetchObject( $res ); $m = array(); if ( preg_match( '/\((.*)\)/', $row->Type, $m ) ) { $size = $m[1]; } else { $size = -1; } return $size; } /** * A string to insert into queries to show that they're low-priority, like * MySQL's LOW_PRIORITY. If no such feature exists, return an empty * string and nothing bad should happen. * * @return string Returns the text of the low priority option if it is * supported, or a blank string otherwise */ public function lowPriorityOption() { return ''; } /** * DELETE query wrapper. * * @param array $table Table name * @param string|array $conds Array of conditions. See $conds in DatabaseBase::select() * for the format. Use $conds == "*" to delete all rows * @param string $fname Name of the calling function * @throws DBUnexpectedError * @return bool|ResultWrapper */ public function delete( $table, $conds, $fname = __METHOD__ ) { if ( !$conds ) { throw new DBUnexpectedError( $this, 'DatabaseBase::delete() called with no conditions' ); } $table = $this->tableName( $table ); $sql = "DELETE FROM $table"; if ( $conds != '*' ) { if ( is_array( $conds ) ) { $conds = $this->makeList( $conds, LIST_AND ); } $sql .= ' WHERE ' . $conds; } return $this->query( $sql, $fname ); } /** * INSERT SELECT wrapper. Takes data from a SELECT query and inserts it * into another table. * * @param string $destTable The table name to insert into * @param string|array $srcTable May be either a table name, or an array of table names * to include in a join. * * @param array $varMap Must be an associative array of the form * array( 'dest1' => 'source1', ...). Source items may be literals * rather than field names, but strings should be quoted with * DatabaseBase::addQuotes() * * @param array $conds Condition array. See $conds in DatabaseBase::select() for * the details of the format of condition arrays. May be "*" to copy the * whole table. * * @param string $fname The function name of the caller, from __METHOD__ * * @param array $insertOptions Options for the INSERT part of the query, see * DatabaseBase::insert() for details. * @param array $selectOptions Options for the SELECT part of the query, see * DatabaseBase::select() for details. * * @return ResultWrapper */ public function insertSelect( $destTable, $srcTable, $varMap, $conds, $fname = __METHOD__, $insertOptions = array(), $selectOptions = array() ) { $destTable = $this->tableName( $destTable ); if ( !is_array( $insertOptions ) ) { $insertOptions = array( $insertOptions ); } $insertOptions = $this->makeInsertOptions( $insertOptions ); if ( !is_array( $selectOptions ) ) { $selectOptions = array( $selectOptions ); } list( $startOpts, $useIndex, $tailOpts ) = $this->makeSelectOptions( $selectOptions ); if ( is_array( $srcTable ) ) { $srcTable = implode( ',', array_map( array( &$this, 'tableName' ), $srcTable ) ); } else { $srcTable = $this->tableName( $srcTable ); } $sql = "INSERT $insertOptions INTO $destTable (" . implode( ',', array_keys( $varMap ) ) . ')' . " SELECT $startOpts " . implode( ',', $varMap ) . " FROM $srcTable $useIndex "; if ( $conds != '*' ) { if ( is_array( $conds ) ) { $conds = $this->makeList( $conds, LIST_AND ); } $sql .= " WHERE $conds"; } $sql .= " $tailOpts"; return $this->query( $sql, $fname ); } /** * Construct a LIMIT query with optional offset. This is used for query * pages. The SQL should be adjusted so that only the first $limit rows * are returned. If $offset is provided as well, then the first $offset * rows should be discarded, and the next $limit rows should be returned. * If the result of the query is not ordered, then the rows to be returned * are theoretically arbitrary. * * $sql is expected to be a SELECT, if that makes a difference. * * The version provided by default works in MySQL and SQLite. It will very * likely need to be overridden for most other DBMSes. * * @param string $sql SQL query we will append the limit too * @param int $limit The SQL limit * @param int|bool $offset The SQL offset (default false) * @throws DBUnexpectedError * @return string */ public function limitResult( $sql, $limit, $offset = false ) { if ( !is_numeric( $limit ) ) { throw new DBUnexpectedError( $this, "Invalid non-numeric limit passed to limitResult()\n" ); } return "$sql LIMIT " . ( ( is_numeric( $offset ) && $offset != 0 ) ? "{$offset}," : "" ) . "{$limit} "; } /** * Returns true if current database backend supports ORDER BY or LIMIT for separate subqueries * within the UNION construct. * @return bool */ public function unionSupportsOrderAndLimit() { return true; // True for almost every DB supported } /** * Construct a UNION query * This is used for providing overload point for other DB abstractions * not compatible with the MySQL syntax. * @param array $sqls SQL statements to combine * @param bool $all Use UNION ALL * @return string SQL fragment */ public function unionQueries( $sqls, $all ) { $glue = $all ? ') UNION ALL (' : ') UNION ('; return '(' . implode( $glue, $sqls ) . ')'; } /** * Returns an SQL expression for a simple conditional. This doesn't need * to be overridden unless CASE isn't supported in your DBMS. * * @param string|array $cond SQL expression which will result in a boolean value * @param string $trueVal SQL expression to return if true * @param string $falseVal SQL expression to return if false * @return string SQL fragment */ public function conditional( $cond, $trueVal, $falseVal ) { if ( is_array( $cond ) ) { $cond = $this->makeList( $cond, LIST_AND ); } return " (CASE WHEN $cond THEN $trueVal ELSE $falseVal END) "; } /** * Returns a comand for str_replace function in SQL query. * Uses REPLACE() in MySQL * * @param string $orig Column to modify * @param string $old Column to seek * @param string $new Column to replace with * * @return string */ public function strreplace( $orig, $old, $new ) { return "REPLACE({$orig}, {$old}, {$new})"; } /** * Determines how long the server has been up * STUB * * @return int */ public function getServerUptime() { return 0; } /** * Determines if the last failure was due to a deadlock * STUB * * @return bool */ public function wasDeadlock() { return false; } /** * Determines if the last failure was due to a lock timeout * STUB * * @return bool */ public function wasLockTimeout() { return false; } /** * Determines if the last query error was something that should be dealt * with by pinging the connection and reissuing the query. * STUB * * @return bool */ public function wasErrorReissuable() { return false; } /** * Determines if the last failure was due to the database being read-only. * STUB * * @return bool */ public function wasReadOnlyError() { return false; } /** * Determines if the given query error was a connection drop * STUB * * @param integer|string $errno * @return bool */ public function wasConnectionError( $errno ) { return false; } /** * Perform a deadlock-prone transaction. * * This function invokes a callback function to perform a set of write * queries. If a deadlock occurs during the processing, the transaction * will be rolled back and the callback function will be called again. * * Usage: * $dbw->deadlockLoop( callback, ... ); * * Extra arguments are passed through to the specified callback function. * * Returns whatever the callback function returned on its successful, * iteration, or false on error, for example if the retry limit was * reached. * * @return mixed * @throws DBQueryError */ public function deadlockLoop() { $args = func_get_args(); $function = array_shift( $args ); $tries = self::DEADLOCK_TRIES; if ( is_array( $function ) ) { $fname = $function[0]; } else { $fname = $function; } $this->begin( __METHOD__ ); $retVal = null; $e = null; do { try { $retVal = call_user_func_array( $function, $args ); break; } catch ( DBQueryError $e ) { if ( $this->wasDeadlock() ) { // Retry after a randomized delay usleep( mt_rand( self::DEADLOCK_DELAY_MIN, self::DEADLOCK_DELAY_MAX ) ); } else { // Throw the error back up throw $e; } } } while ( --$tries > 0 ); if ( $tries <= 0 ) { // Too many deadlocks; give up $this->rollback( __METHOD__ ); throw $e; } else { $this->commit( __METHOD__ ); return $retVal; } } /** * Wait for the slave to catch up to a given master position. * * @param DBMasterPos $pos * @param int $timeout The maximum number of seconds to wait for * synchronisation * @return int Zero if the slave was past that position already, * greater than zero if we waited for some period of time, less than * zero if we timed out. */ public function masterPosWait( DBMasterPos $pos, $timeout ) { # Real waits are implemented in the subclass. return 0; } /** * Get the replication position of this slave * * @return DBMasterPos|bool False if this is not a slave. */ public function getSlavePos() { # Stub return false; } /** * Get the position of this master * * @return DBMasterPos|bool False if this is not a master */ public function getMasterPos() { # Stub return false; } /** * Run an anonymous function as soon as there is no transaction pending. * If there is a transaction and it is rolled back, then the callback is cancelled. * Queries in the function will run in AUTO-COMMIT mode unless there are begin() calls. * Callbacks must commit any transactions that they begin. * * This is useful for updates to different systems or when separate transactions are needed. * For example, one might want to enqueue jobs into a system outside the database, but only * after the database is updated so that the jobs will see the data when they actually run. * It can also be used for updates that easily cause deadlocks if locks are held too long. * * @param callable $callback * @since 1.20 */ final public function onTransactionIdle( $callback ) { $this->mTrxIdleCallbacks[] = array( $callback, wfGetCaller() ); if ( !$this->mTrxLevel ) { $this->runOnTransactionIdleCallbacks(); } } /** * Run an anonymous function before the current transaction commits or now if there is none. * If there is a transaction and it is rolled back, then the callback is cancelled. * Callbacks must not start nor commit any transactions. * * This is useful for updates that easily cause deadlocks if locks are held too long * but where atomicity is strongly desired for these updates and some related updates. * * @param callable $callback * @since 1.22 */ final public function onTransactionPreCommitOrIdle( $callback ) { if ( $this->mTrxLevel ) { $this->mTrxPreCommitCallbacks[] = array( $callback, wfGetCaller() ); } else { $this->onTransactionIdle( $callback ); // this will trigger immediately } } /** * Actually any "on transaction idle" callbacks. * * @since 1.20 */ protected function runOnTransactionIdleCallbacks() { $autoTrx = $this->getFlag( DBO_TRX ); // automatic begin() enabled? $e = $ePrior = null; // last exception do { // callbacks may add callbacks :) $callbacks = $this->mTrxIdleCallbacks; $this->mTrxIdleCallbacks = array(); // recursion guard foreach ( $callbacks as $callback ) { try { list( $phpCallback ) = $callback; $this->clearFlag( DBO_TRX ); // make each query its own transaction call_user_func( $phpCallback ); $this->setFlag( $autoTrx ? DBO_TRX : 0 ); // restore automatic begin() } catch ( Exception $e ) { if ( $ePrior ) { MWExceptionHandler::logException( $ePrior ); } $ePrior = $e; } } } while ( count( $this->mTrxIdleCallbacks ) ); if ( $e instanceof Exception ) { throw $e; // re-throw any last exception } } /** * Actually any "on transaction pre-commit" callbacks. * * @since 1.22 */ protected function runOnTransactionPreCommitCallbacks() { $e = $ePrior = null; // last exception do { // callbacks may add callbacks :) $callbacks = $this->mTrxPreCommitCallbacks; $this->mTrxPreCommitCallbacks = array(); // recursion guard foreach ( $callbacks as $callback ) { try { list( $phpCallback ) = $callback; call_user_func( $phpCallback ); } catch ( Exception $e ) { if ( $ePrior ) { MWExceptionHandler::logException( $ePrior ); } $ePrior = $e; } } } while ( count( $this->mTrxPreCommitCallbacks ) ); if ( $e instanceof Exception ) { throw $e; // re-throw any last exception } } /** * Begin an atomic section of statements * * If a transaction has been started already, just keep track of the given * section name to make sure the transaction is not committed pre-maturely. * This function can be used in layers (with sub-sections), so use a stack * to keep track of the different atomic sections. If there is no transaction, * start one implicitly. * * The goal of this function is to create an atomic section of SQL queries * without having to start a new transaction if it already exists. * * Atomic sections are more strict than transactions. With transactions, * attempting to begin a new transaction when one is already running results * in MediaWiki issuing a brief warning and doing an implicit commit. All * atomic levels *must* be explicitly closed using DatabaseBase::endAtomic(), * and any database transactions cannot be began or committed until all atomic * levels are closed. There is no such thing as implicitly opening or closing * an atomic section. * * @since 1.23 * @param string $fname * @throws DBError */ final public function startAtomic( $fname = __METHOD__ ) { if ( !$this->mTrxLevel ) { $this->begin( $fname ); $this->mTrxAutomatic = true; // If DBO_TRX is set, a series of startAtomic/endAtomic pairs will result // in all changes being in one transaction to keep requests transactional. if ( !$this->getFlag( DBO_TRX ) ) { $this->mTrxAutomaticAtomic = true; } } $this->mTrxAtomicLevels->push( $fname ); } /** * Ends an atomic section of SQL statements * * Ends the next section of atomic SQL statements and commits the transaction * if necessary. * * @since 1.23 * @see DatabaseBase::startAtomic * @param string $fname * @throws DBError */ final public function endAtomic( $fname = __METHOD__ ) { if ( !$this->mTrxLevel ) { throw new DBUnexpectedError( $this, 'No atomic transaction is open.' ); } if ( $this->mTrxAtomicLevels->isEmpty() || $this->mTrxAtomicLevels->pop() !== $fname ) { throw new DBUnexpectedError( $this, 'Invalid atomic section ended.' ); } if ( $this->mTrxAtomicLevels->isEmpty() && $this->mTrxAutomaticAtomic ) { $this->commit( $fname, 'flush' ); } } /** * Begin a transaction. If a transaction is already in progress, * that transaction will be committed before the new transaction is started. * * Note that when the DBO_TRX flag is set (which is usually the case for web * requests, but not for maintenance scripts), any previous database query * will have started a transaction automatically. * * Nesting of transactions is not supported. Attempts to nest transactions * will cause a warning, unless the current transaction was started * automatically because of the DBO_TRX flag. * * @param string $fname * @throws DBError */ final public function begin( $fname = __METHOD__ ) { global $wgDebugDBTransactions; if ( $this->mTrxLevel ) { // implicit commit if ( !$this->mTrxAtomicLevels->isEmpty() ) { // If the current transaction was an automatic atomic one, then we definitely have // a problem. Same if there is any unclosed atomic level. throw new DBUnexpectedError( $this, "Attempted to start explicit transaction when atomic levels are still open." ); } elseif ( !$this->mTrxAutomatic ) { // We want to warn about inadvertently nested begin/commit pairs, but not about // auto-committing implicit transactions that were started by query() via DBO_TRX $msg = "$fname: Transaction already in progress (from {$this->mTrxFname}), " . " performing implicit commit!"; wfWarn( $msg ); wfLogDBError( $msg, $this->getLogContext( array( 'method' => __METHOD__, 'fname' => $fname, ) ) ); } else { // if the transaction was automatic and has done write operations, // log it if $wgDebugDBTransactions is enabled. if ( $this->mTrxDoneWrites && $wgDebugDBTransactions ) { wfDebug( "$fname: Automatic transaction with writes in progress" . " (from {$this->mTrxFname}), performing implicit commit!\n" ); } } $this->runOnTransactionPreCommitCallbacks(); $writeTime = $this->pendingWriteQueryDuration(); $this->doCommit( $fname ); if ( $this->mTrxDoneWrites ) { $this->mDoneWrites = microtime( true ); $this->getTransactionProfiler()->transactionWritingOut( $this->mServer, $this->mDBname, $this->mTrxShortId, $writeTime ); } $this->runOnTransactionIdleCallbacks(); } # Avoid fatals if close() was called $this->assertOpen(); $this->doBegin( $fname ); $this->mTrxTimestamp = microtime( true ); $this->mTrxFname = $fname; $this->mTrxDoneWrites = false; $this->mTrxAutomatic = false; $this->mTrxAutomaticAtomic = false; $this->mTrxAtomicLevels = new SplStack; $this->mTrxIdleCallbacks = array(); $this->mTrxPreCommitCallbacks = array(); $this->mTrxShortId = wfRandomString( 12 ); $this->mTrxWriteDuration = 0.0; } /** * Issues the BEGIN command to the database server. * * @see DatabaseBase::begin() * @param string $fname */ protected function doBegin( $fname ) { $this->query( 'BEGIN', $fname ); $this->mTrxLevel = 1; } /** * Commits a transaction previously started using begin(). * If no transaction is in progress, a warning is issued. * * Nesting of transactions is not supported. * * @param string $fname * @param string $flush Flush flag, set to 'flush' to disable warnings about * explicitly committing implicit transactions, or calling commit when no * transaction is in progress. This will silently break any ongoing * explicit transaction. Only set the flush flag if you are sure that it * is safe to ignore these warnings in your context. * @throws DBUnexpectedError */ final public function commit( $fname = __METHOD__, $flush = '' ) { if ( !$this->mTrxAtomicLevels->isEmpty() ) { // There are still atomic sections open. This cannot be ignored throw new DBUnexpectedError( $this, "Attempted to commit transaction while atomic sections are still open" ); } if ( $flush === 'flush' ) { if ( !$this->mTrxLevel ) { return; // nothing to do } elseif ( !$this->mTrxAutomatic ) { wfWarn( "$fname: Flushing an explicit transaction, getting out of sync!" ); } } else { if ( !$this->mTrxLevel ) { wfWarn( "$fname: No transaction to commit, something got out of sync!" ); return; // nothing to do } elseif ( $this->mTrxAutomatic ) { wfWarn( "$fname: Explicit commit of implicit transaction. Something may be out of sync!" ); } } # Avoid fatals if close() was called $this->assertOpen(); $this->runOnTransactionPreCommitCallbacks(); $writeTime = $this->pendingWriteQueryDuration(); $this->doCommit( $fname ); if ( $this->mTrxDoneWrites ) { $this->mDoneWrites = microtime( true ); $this->getTransactionProfiler()->transactionWritingOut( $this->mServer, $this->mDBname, $this->mTrxShortId, $writeTime ); } $this->runOnTransactionIdleCallbacks(); } /** * Issues the COMMIT command to the database server. * * @see DatabaseBase::commit() * @param string $fname */ protected function doCommit( $fname ) { if ( $this->mTrxLevel ) { $this->query( 'COMMIT', $fname ); $this->mTrxLevel = 0; } } /** * Rollback a transaction previously started using begin(). * If no transaction is in progress, a warning is issued. * * No-op on non-transactional databases. * * @param string $fname * @param string $flush Flush flag, set to 'flush' to disable warnings about * calling rollback when no transaction is in progress. This will silently * break any ongoing explicit transaction. Only set the flush flag if you * are sure that it is safe to ignore these warnings in your context. * @throws DBUnexpectedError * @since 1.23 Added $flush parameter */ final public function rollback( $fname = __METHOD__, $flush = '' ) { if ( $flush !== 'flush' ) { if ( !$this->mTrxLevel ) { wfWarn( "$fname: No transaction to rollback, something got out of sync!" ); return; // nothing to do } elseif ( $this->mTrxAutomatic ) { wfWarn( "$fname: Explicit rollback of implicit transaction. Something may be out of sync!" ); } } else { if ( !$this->mTrxLevel ) { return; // nothing to do } elseif ( !$this->mTrxAutomatic ) { wfWarn( "$fname: Flushing an explicit transaction, getting out of sync!" ); } } # Avoid fatals if close() was called $this->assertOpen(); $this->doRollback( $fname ); $this->mTrxIdleCallbacks = array(); // cancel $this->mTrxPreCommitCallbacks = array(); // cancel $this->mTrxAtomicLevels = new SplStack; if ( $this->mTrxDoneWrites ) { $this->getTransactionProfiler()->transactionWritingOut( $this->mServer, $this->mDBname, $this->mTrxShortId ); } } /** * Issues the ROLLBACK command to the database server. * * @see DatabaseBase::rollback() * @param string $fname */ protected function doRollback( $fname ) { if ( $this->mTrxLevel ) { $this->query( 'ROLLBACK', $fname, true ); $this->mTrxLevel = 0; } } /** * Creates a new table with structure copied from existing table * Note that unlike most database abstraction functions, this function does not * automatically append database prefix, because it works at a lower * abstraction level. * The table names passed to this function shall not be quoted (this * function calls addIdentifierQuotes when needed). * * @param string $oldName Name of table whose structure should be copied * @param string $newName Name of table to be created * @param bool $temporary Whether the new table should be temporary * @param string $fname Calling function name * @throws MWException * @return bool True if operation was successful */ public function duplicateTableStructure( $oldName, $newName, $temporary = false, $fname = __METHOD__ ) { throw new MWException( 'DatabaseBase::duplicateTableStructure is not implemented in descendant class' ); } /** * List all tables on the database * * @param string $prefix Only show tables with this prefix, e.g. mw_ * @param string $fname Calling function name * @throws MWException * @return array */ function listTables( $prefix = null, $fname = __METHOD__ ) { throw new MWException( 'DatabaseBase::listTables is not implemented in descendant class' ); } /** * Reset the views process cache set by listViews() * @since 1.22 */ final public function clearViewsCache() { $this->allViews = null; } /** * Lists all the VIEWs in the database * * For caching purposes the list of all views should be stored in * $this->allViews. The process cache can be cleared with clearViewsCache() * * @param string $prefix Only show VIEWs with this prefix, eg. unit_test_ * @param string $fname Name of calling function * @throws MWException * @return array * @since 1.22 */ public function listViews( $prefix = null, $fname = __METHOD__ ) { throw new MWException( 'DatabaseBase::listViews is not implemented in descendant class' ); } /** * Differentiates between a TABLE and a VIEW * * @param string $name Name of the database-structure to test. * @throws MWException * @return bool * @since 1.22 */ public function isView( $name ) { throw new MWException( 'DatabaseBase::isView is not implemented in descendant class' ); } /** * Convert a timestamp in one of the formats accepted by wfTimestamp() * to the format used for inserting into timestamp fields in this DBMS. * * The result is unquoted, and needs to be passed through addQuotes() * before it can be included in raw SQL. * * @param string|int $ts * * @return string */ public function timestamp( $ts = 0 ) { return wfTimestamp( TS_MW, $ts ); } /** * Convert a timestamp in one of the formats accepted by wfTimestamp() * to the format used for inserting into timestamp fields in this DBMS. If * NULL is input, it is passed through, allowing NULL values to be inserted * into timestamp fields. * * The result is unquoted, and needs to be passed through addQuotes() * before it can be included in raw SQL. * * @param string|int $ts * * @return string */ public function timestampOrNull( $ts = null ) { if ( is_null( $ts ) ) { return null; } else { return $this->timestamp( $ts ); } } /** * Take the result from a query, and wrap it in a ResultWrapper if * necessary. Boolean values are passed through as is, to indicate success * of write queries or failure. * * Once upon a time, DatabaseBase::query() returned a bare MySQL result * resource, and it was necessary to call this function to convert it to * a wrapper. Nowadays, raw database objects are never exposed to external * callers, so this is unnecessary in external code. For compatibility with * old code, ResultWrapper objects are passed through unaltered. * * @param bool|ResultWrapper|resource $result * @return bool|ResultWrapper */ public function resultObject( $result ) { if ( empty( $result ) ) { return false; } elseif ( $result instanceof ResultWrapper ) { return $result; } elseif ( $result === true ) { // Successful write query return $result; } else { return new ResultWrapper( $this, $result ); } } /** * Ping the server and try to reconnect if it there is no connection * * @return bool Success or failure */ public function ping() { # Stub. Not essential to override. return true; } /** * Get slave lag. Currently supported only by MySQL. * * Note that this function will generate a fatal error on many * installations. Most callers should use LoadBalancer::safeGetLag() * instead. * * @return int Database replication lag in seconds */ public function getLag() { return 0; } /** * Return the maximum number of items allowed in a list, or 0 for unlimited. * * @return int */ function maxListLen() { return 0; } /** * Some DBMSs have a special format for inserting into blob fields, they * don't allow simple quoted strings to be inserted. To insert into such * a field, pass the data through this function before passing it to * DatabaseBase::insert(). * * @param string $b * @return string */ public function encodeBlob( $b ) { return $b; } /** * Some DBMSs return a special placeholder object representing blob fields * in result objects. Pass the object through this function to return the * original string. * * @param string|Blob $b * @return string */ public function decodeBlob( $b ) { if ( $b instanceof Blob ) { $b = $b->fetch(); } return $b; } /** * Override database's default behavior. $options include: * 'connTimeout' : Set the connection timeout value in seconds. * May be useful for very long batch queries such as * full-wiki dumps, where a single query reads out over * hours or days. * * @param array $options * @return void */ public function setSessionOptions( array $options ) { } /** * Read and execute SQL commands from a file. * * Returns true on success, error string or exception on failure (depending * on object's error ignore settings). * * @param string $filename File name to open * @param bool|callable $lineCallback Optional function called before reading each line * @param bool|callable $resultCallback Optional function called for each MySQL result * @param bool|string $fname Calling function name or false if name should be * generated dynamically using $filename * @param bool|callable $inputCallback Optional function called for each * complete line sent * @throws Exception|MWException * @return bool|string */ public function sourceFile( $filename, $lineCallback = false, $resultCallback = false, $fname = false, $inputCallback = false ) { MediaWiki\suppressWarnings(); $fp = fopen( $filename, 'r' ); MediaWiki\restoreWarnings(); if ( false === $fp ) { throw new MWException( "Could not open \"{$filename}\".\n" ); } if ( !$fname ) { $fname = __METHOD__ . "( $filename )"; } try { $error = $this->sourceStream( $fp, $lineCallback, $resultCallback, $fname, $inputCallback ); } catch ( Exception $e ) { fclose( $fp ); throw $e; } fclose( $fp ); return $error; } /** * Get the full path of a patch file. Originally based on archive() * from updaters.inc. Keep in mind this always returns a patch, as * it fails back to MySQL if no DB-specific patch can be found * * @param string $patch The name of the patch, like patch-something.sql * @return string Full path to patch file */ public function patchPath( $patch ) { global $IP; $dbType = $this->getType(); if ( file_exists( "$IP/maintenance/$dbType/archives/$patch" ) ) { return "$IP/maintenance/$dbType/archives/$patch"; } else { return "$IP/maintenance/archives/$patch"; } } /** * Set variables to be used in sourceFile/sourceStream, in preference to the * ones in $GLOBALS. If an array is set here, $GLOBALS will not be used at * all. If it's set to false, $GLOBALS will be used. * * @param bool|array $vars Mapping variable name to value. */ public function setSchemaVars( $vars ) { $this->mSchemaVars = $vars; } /** * Read and execute commands from an open file handle. * * Returns true on success, error string or exception on failure (depending * on object's error ignore settings). * * @param resource $fp File handle * @param bool|callable $lineCallback Optional function called before reading each query * @param bool|callable $resultCallback Optional function called for each MySQL result * @param string $fname Calling function name * @param bool|callable $inputCallback Optional function called for each complete query sent * @return bool|string */ public function sourceStream( $fp, $lineCallback = false, $resultCallback = false, $fname = __METHOD__, $inputCallback = false ) { $cmd = ''; while ( !feof( $fp ) ) { if ( $lineCallback ) { call_user_func( $lineCallback ); } $line = trim( fgets( $fp ) ); if ( $line == '' ) { continue; } if ( '-' == $line[0] && '-' == $line[1] ) { continue; } if ( $cmd != '' ) { $cmd .= ' '; } $done = $this->streamStatementEnd( $cmd, $line ); $cmd .= "$line\n"; if ( $done || feof( $fp ) ) { $cmd = $this->replaceVars( $cmd ); if ( ( $inputCallback && call_user_func( $inputCallback, $cmd ) ) || !$inputCallback ) { $res = $this->query( $cmd, $fname ); if ( $resultCallback ) { call_user_func( $resultCallback, $res, $this ); } if ( false === $res ) { $err = $this->lastError(); return "Query \"{$cmd}\" failed with error code \"$err\".\n"; } } $cmd = ''; } } return true; } /** * Called by sourceStream() to check if we've reached a statement end * * @param string $sql SQL assembled so far * @param string $newLine New line about to be added to $sql * @return bool Whether $newLine contains end of the statement */ public function streamStatementEnd( &$sql, &$newLine ) { if ( $this->delimiter ) { $prev = $newLine; $newLine = preg_replace( '/' . preg_quote( $this->delimiter, '/' ) . '$/', '', $newLine ); if ( $newLine != $prev ) { return true; } } return false; } /** * Database independent variable replacement. Replaces a set of variables * in an SQL statement with their contents as given by $this->getSchemaVars(). * * Supports '{$var}' `{$var}` and / *$var* / (without the spaces) style variables. * * - '{$var}' should be used for text and is passed through the database's * addQuotes method. * - `{$var}` should be used for identifiers (e.g. table and database names). * It is passed through the database's addIdentifierQuotes method which * can be overridden if the database uses something other than backticks. * - / *_* / or / *$wgDBprefix* / passes the name that follows through the * database's tableName method. * - / *i* / passes the name that follows through the database's indexName method. * - In all other cases, / *$var* / is left unencoded. Except for table options, * its use should be avoided. In 1.24 and older, string encoding was applied. * * @param string $ins SQL statement to replace variables in * @return string The new SQL statement with variables replaced */ protected function replaceVars( $ins ) { $that = $this; $vars = $this->getSchemaVars(); return preg_replace_callback( '! /\* (\$wgDBprefix|[_i]) \*/ (\w*) | # 1-2. tableName, indexName \'\{\$ (\w+) }\' | # 3. addQuotes `\{\$ (\w+) }` | # 4. addIdentifierQuotes /\*\$ (\w+) \*/ # 5. leave unencoded !x', function ( $m ) use ( $that, $vars ) { // Note: Because of , // check for both nonexistent keys *and* the empty string. if ( isset( $m[1] ) && $m[1] !== '' ) { if ( $m[1] === 'i' ) { return $that->indexName( $m[2] ); } else { return $that->tableName( $m[2] ); } } elseif ( isset( $m[3] ) && $m[3] !== '' && array_key_exists( $m[3], $vars ) ) { return $that->addQuotes( $vars[$m[3]] ); } elseif ( isset( $m[4] ) && $m[4] !== '' && array_key_exists( $m[4], $vars ) ) { return $that->addIdentifierQuotes( $vars[$m[4]] ); } elseif ( isset( $m[5] ) && $m[5] !== '' && array_key_exists( $m[5], $vars ) ) { return $vars[$m[5]]; } else { return $m[0]; } }, $ins ); } /** * Get schema variables. If none have been set via setSchemaVars(), then * use some defaults from the current object. * * @return array */ protected function getSchemaVars() { if ( $this->mSchemaVars ) { return $this->mSchemaVars; } else { return $this->getDefaultSchemaVars(); } } /** * Get schema variables to use if none have been set via setSchemaVars(). * * Override this in derived classes to provide variables for tables.sql * and SQL patch files. * * @return array */ protected function getDefaultSchemaVars() { return array(); } /** * Check to see if a named lock is available (non-blocking) * * @param string $lockName Name of lock to poll * @param string $method Name of method calling us * @return bool * @since 1.20 */ public function lockIsFree( $lockName, $method ) { return true; } /** * Acquire a named lock * * Named locks are not related to transactions * * @param string $lockName Name of lock to aquire * @param string $method Name of method calling us * @param int $timeout * @return bool */ public function lock( $lockName, $method, $timeout = 5 ) { return true; } /** * Release a lock * * Named locks are not related to transactions * * @param string $lockName Name of lock to release * @param string $method Name of method calling us * * @return int Returns 1 if the lock was released, 0 if the lock was not established * by this thread (in which case the lock is not released), and NULL if the named * lock did not exist */ public function unlock( $lockName, $method ) { return true; } /** * Check to see if a named lock used by lock() use blocking queues * * @return bool * @since 1.26 */ public function namedLocksEnqueue() { return false; } /** * Lock specific tables * * @param array $read Array of tables to lock for read access * @param array $write Array of tables to lock for write access * @param string $method Name of caller * @param bool $lowPriority Whether to indicate writes to be LOW PRIORITY * @return bool */ public function lockTables( $read, $write, $method, $lowPriority = true ) { return true; } /** * Unlock specific tables * * @param string $method The caller * @return bool */ public function unlockTables( $method ) { return true; } /** * Delete a table * @param string $tableName * @param string $fName * @return bool|ResultWrapper * @since 1.18 */ public function dropTable( $tableName, $fName = __METHOD__ ) { if ( !$this->tableExists( $tableName, $fName ) ) { return false; } $sql = "DROP TABLE " . $this->tableName( $tableName ); if ( $this->cascadingDeletes() ) { $sql .= " CASCADE"; } return $this->query( $sql, $fName ); } /** * Get search engine class. All subclasses of this need to implement this * if they wish to use searching. * * @return string */ public function getSearchEngine() { return 'SearchEngineDummy'; } /** * Find out when 'infinity' is. Most DBMSes support this. This is a special * keyword for timestamps in PostgreSQL, and works with CHAR(14) as well * because "i" sorts after all numbers. * * @return string */ public function getInfinity() { return 'infinity'; } /** * Encode an expiry time into the DBMS dependent format * * @param string $expiry Timestamp for expiry, or the 'infinity' string * @return string */ public function encodeExpiry( $expiry ) { return ( $expiry == '' || $expiry == 'infinity' || $expiry == $this->getInfinity() ) ? $this->getInfinity() : $this->timestamp( $expiry ); } /** * Decode an expiry time into a DBMS independent format * * @param string $expiry DB timestamp field value for expiry * @param int $format TS_* constant, defaults to TS_MW * @return string */ public function decodeExpiry( $expiry, $format = TS_MW ) { return ( $expiry == '' || $expiry == 'infinity' || $expiry == $this->getInfinity() ) ? 'infinity' : wfTimestamp( $format, $expiry ); } /** * Allow or deny "big selects" for this session only. This is done by setting * the sql_big_selects session variable. * * This is a MySQL-specific feature. * * @param bool|string $value True for allow, false for deny, or "default" to * restore the initial value */ public function setBigSelects( $value = true ) { // no-op } /** * @since 1.19 * @return string */ public function __toString() { return (string)$this->mConn; } /** * Run a few simple sanity checks */ public function __destruct() { if ( $this->mTrxLevel && $this->mTrxDoneWrites ) { trigger_error( "Uncommitted DB writes (transaction from {$this->mTrxFname})." ); } if ( count( $this->mTrxIdleCallbacks ) || count( $this->mTrxPreCommitCallbacks ) ) { $callers = array(); foreach ( $this->mTrxIdleCallbacks as $callbackInfo ) { $callers[] = $callbackInfo[1]; } $callers = implode( ', ', $callers ); trigger_error( "DB transaction callbacks still pending (from $callers)." ); } } }