From db1dde541c09927eb5f9bc1240a867d92e084cd9 Mon Sep 17 00:00:00 2001
From: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Date: Wed, 21 Oct 2009 00:21:58 -0300
Subject: Fix how mkarchiso makes usb image

The current implementation in how partition is created for ext2 img
it looks a bit bad.

This patch makes the partition in more standarized way, respecting
cylinder alignement:
* The size of resulting image will be in cylinder multiple ~8MB.
* Use fdisk instead of sfdisk (sfdisk write some bad information)
* Make the result image in one pass, instead of concatenating.

Also the advantage is that with this can add another partitions
without any issues in the usb-flash-drive with this .img.

For example of current situation:

qemu-system-x86_64 -hda archlinux-avr.toolchain.img -serial stdio
---------------------------------------------------------------------
[root@avr ~]# fdisk /dev/sda

Command (m for help): p

Disk /dev/sda: 223 MB, 223974400 bytes
59 heads, 41 sectors/track, 180 cylinders
Units = cylinders of 2419 * 512 = 1238528 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1         181      218693+  83  Linux
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 1, 1) logical=(0, 1, 23)
Partition 1 has different physical/logical endings:
     phys=(27, 58, 41) logical=(180, 49, 21)

Command (m for help): v
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 1, 1) logical=(0, 1, 23)
Partition 1 has different physical/logical endings:
     phys=(27, 58, 41) logical=(180, 49, 21)
Partition 1: previous sectors 437449 disagrees with total 67731
62 unallocated 512-byte sectors

Command (m for help):
---------------------------------------------------------------------

qemu-system-x86_64 -hda archlinux-avr.toolchain-fix.img -serial stdio
---------------------------------------------------------------------
[root@avr ~]# fdisk /dev/sda

Command (m for help): p

Disk /dev/sda: 230 MB, 230307840 bytes
255 heads, 63 sectors/track, 28 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x5c94ca4f

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          28      224878+  83  Linux

Command (m for help): v
62 unallocated 512-byte sectors
---------------------------------------------------------------------

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
---
 archiso/mkarchiso | 48 +++++++++++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 19 deletions(-)

(limited to 'archiso')

diff --git a/archiso/mkarchiso b/archiso/mkarchiso
index 7b706ca..b6d0f54 100755
--- a/archiso/mkarchiso
+++ b/archiso/mkarchiso
@@ -261,39 +261,49 @@ command_iso () {
 
 command_usb () {
     _imgcommon
-    
-    fsimg="${imgname}.part1"
+
+    modprobe -q loop
+
+    # Calculate cylinder size in bytes
+    CYL_SIZE=$((255*63*512))
+
+    # First partition offset
+    PART_OFFSET=$((63*512))
 
     # ext2 overhead's upper bound is 6%, empirically tested up to 1GB
     rootsize=$(du -bs "${work_dir}/iso" | cut -f1)
-    imgsz=$(( (${rootsize}*106)/100/512 + 1)) # image size in sectors
+    imgsz=$(( (${rootsize}*106)/100/${CYL_SIZE} + 1 )) # image size in cylinders
+
+    # Get next free loop device
+    devloop=$(losetup -f)
 
     # create the filesystem image file
-    dd if=/dev/zero of="$fsimg" bs=512 count="$imgsz"
+    dd if=/dev/zero of="$imgname" bs="$CYL_SIZE" count="$imgsz"
+
+    # Setup a loop device, and skip the first 63 sectors
+    losetup "$devloop" -o "$PART_OFFSET" "$imgname"
 
     # create a filesystem on the image
-    mke2fs -m 0 -F -L "${LABEL}" "$fsimg"
+    mke2fs -m 0 -F -L "${LABEL}" "$devloop"
 
     # mount the filesystem and copy data
-    modprobe loop
     TMPDIR=$(mktemp -d archiso-usbXXXXXX)
-    mount -o loop "$fsimg" "$TMPDIR"
+    mount "$devloop" "$TMPDIR"
     cp -a "${work_dir}"/iso/* "$TMPDIR"
-    umount "$TMPDIR"
+    umount -d "$TMPDIR"
     rm -rf "$TMPDIR"
 
-    # add sectors 0-62, then glue together
-    dd if=/dev/zero of="${imgname}" bs=512 count=63
-    cat "$fsimg" >> "${imgname}"
-    rm "$fsimg"
-
     # create a partition table
-    # if this looks like voodoo, it's because it is
-    sfdisk -uS -f "${imgname}" << EOF
-63,$imgsz,83,*
-0,0,00
-0,0,00
-0,0,00
+    fdisk -C "$imgsz" -H 255 -S 63 "$imgname" << EOF
+n
+p
+1
+
+
+a
+1
+p
+w
 EOF
 
     # install grub on the image
-- 
cgit v1.2.2