libre-testing: remove outdated u-boot packages

All these u-boot pakcages were consolidated in SOC specific packages
instead of board specific pakcages in libre.

In addition the libre packages are more recent and in sync with the
Parabola armv7h installation manual.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>

1 files changed, 0 insertions, 240 deletions

diff --git a/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch b/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch
deleted file mode 100644
index 1bd59b27c..000000000
--- a/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig	2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig	2016-02-25 17:57:49.957330489 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h	2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h	2016-02-25 18:03:59.944875290 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
- 
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
- 
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,13 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
-+
-+/* GRUB support */
-+#define CONFIG_API
-+#define CONFIG_SYS_MMC_MAX_DEVICE	2	/* Max number of 'hosts'/controllers */
- 
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -70,110 +78,81 @@
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	DEFAULT_LINUX_BOOT_ENV \
--	"boot_fdt=try\0" \
--	"bootpart=0:2\0" \
-+	"bootpart=0:1\0" \
- 	"bootdir=/boot\0" \
--	"bootfile=zImage\0" \
-+	"fdtdir=/boot/dtbs\0" \
-+	"bootfile=grub/arm-uboot/core.img\0" \
- 	"fdtfile=undefined\0" \
-+	"rdfile=initramfs-linux.img\0" \
- 	"console=ttyO0,115200n8\0" \
- 	"partitions=" \
- 		"uuid_disk=${uuid_gpt_disk};" \
- 		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- 	"optargs=\0" \
--	"mmcdev=0\0" \
--	"mmcroot=/dev/mmcblk0p2 ro\0" \
--	"mmcrootfstype=ext4 rootwait\0" \
--	"rootpath=/export/rootfs\0" \
--	"nfsopts=nolock\0" \
--	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
--		"::off\0" \
--	"ramroot=/dev/ram0 rw\0" \
--	"ramrootfstype=ext2\0" \
-+	"cape_disable=\0" \
-+	"cape_enable=\0" \
-+	"cmdline=\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"${optargs} " \
--		"root=${mmcroot} " \
--		"rootfstype=${mmcrootfstype}\0" \
--	"spiroot=/dev/mtdblock4 rw\0" \
--	"spirootfstype=jffs2\0" \
--	"spisrcaddr=0xe0000\0" \
--	"spiimgsize=0x362000\0" \
--	"spibusno=0\0" \
--	"spiargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=${spiroot} " \
--		"rootfstype=${spirootfstype}\0" \
--	"netargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=/dev/nfs " \
--		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
--		"ip=dhcp\0" \
--	"bootenv=uEnv.txt\0" \
--	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
--	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
--		"source ${loadaddr}\0" \
--	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
--	"importbootenv=echo Importing environment from mmc ...; " \
--		"env import -t -r $loadaddr $filesize\0" \
--	"ramargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=${ramroot} " \
--		"rootfstype=${ramrootfstype}\0" \
--	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
--	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
--	"mmcloados=run mmcargs; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if run loadfdt; then " \
--				"bootz ${loadaddr} - ${fdtaddr}; " \
--			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootz; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
--			"fi; " \
--		"else " \
--			"bootz; " \
--		"fi;\0" \
--	"mmcboot=mmc dev ${mmcdev}; " \
--		"if mmc rescan; then " \
--			"echo SD/MMC found on device ${mmcdev};" \
--			"if run loadbootscript; then " \
--				"run bootscript;" \
--			"else " \
--				"if run loadbootenv; then " \
--					"echo Loaded environment from ${bootenv};" \
--					"run importbootenv;" \
-+		"${cape_disable} " \
-+		"${cape_enable} " \
-+		"root=${root} " \
-+		"${cmdline}\0" \
-+	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+	"mmcboot=usb start;" \
-+		"for devtype in mmc usb; do " \
-+			"for devnum in 0 1; do " \
-+				"if ${devtype} dev ${devnum}; then " \
-+					"echo ${devtype} found on device ${devnum};" \
-+					"setenv bootpart ${devnum}:1;" \
-+					"part uuid ${devtype} ${bootpart} uuid;" \
-+					"setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+					"echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+					"gpio set 54;" \
-+					"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+						"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+						"env import -t ${loadaddr} ${filesize};" \
-+						"echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+						"if test -n ${cape}; then " \
-+							"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+								"setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+							"fi; " \
-+							"echo using: $fdtfile...; " \
-+						"fi; " \
-+						"echo Checking if uenvcmd is set ...;" \
-+						"if test -n ${uenvcmd}; then " \
-+							"echo Running uenvcmd ...;" \
-+							"run uenvcmd;" \
-+						"fi;" \
-+					"fi;" \
-+					"gpio set 55;" \
-+					"if run loadimage; then " \
-+						"run mmcargs;" \
-+						"gpio set 56;" \
-+						"bootm;" \
-+						"if run loadfdt; then " \
-+							"gpio set 57;" \
-+							"if run loadrd; then " \
-+								"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+							"else " \
-+								"bootz ${loadaddr} - ${fdtaddr};" \
-+							"fi;" \
-+						"fi;" \
-+					"else " \
-+						"echo No GRUB found;" \
-+					"fi;" \
-+					"gpio clear 54; gpio clear 55;" \
-+					"setexpr devnum ${devnum} + 1;" \
- 				"fi;" \
--				"if test -n $uenvcmd; then " \
--					"echo Running uenvcmd ...;" \
--					"run uenvcmd;" \
--				"fi;" \
--				"if run loadimage; then " \
--					"run mmcloados;" \
--				"fi;" \
--			"fi ;" \
--		"fi;\0" \
--	"spiboot=echo Booting from spi ...; " \
--		"run spiargs; " \
--		"sf probe ${spibusno}:0; " \
--		"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
--		"bootz ${loadaddr}\0" \
--	"netboot=echo Booting from network ...; " \
--		"setenv autoload no; " \
--		"dhcp; " \
--		"tftp ${loadaddr} ${bootfile}; " \
--		"tftp ${fdtaddr} ${fdtfile}; " \
--		"run netargs; " \
--		"bootz ${loadaddr} - ${fdtaddr}\0" \
--	"ramboot=echo Booting from ramdisk ...; " \
--		"run ramargs; " \
--		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+			"done;" \
-+		"done;\0" \
- 	"findfdt="\
- 		"if test $board_name = A335BONE; then " \
--			"setenv fdtfile am335x-bone.dtb; fi; " \
-+			"setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- 		"if test $board_name = A335BNLT; then " \
--			"setenv fdtfile am335x-boneblack.dtb; fi; " \
-+			"setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- 		"if test $board_name = A33515BB; then " \
- 			"setenv fdtfile am335x-evm.dtb; fi; " \
- 		"if test $board_name = A335X_SK; then " \
-@@ -185,12 +164,12 @@
- #endif
- 
- #define CONFIG_BOOTCOMMAND \
--	"run findfdt; " \
--	"run mmcboot;" \
--	"setenv mmcdev 1; " \
--	"setenv bootpart 1:2; " \
-+	"gpio set 53;" \
-+	"run findfdt;" \
- 	"run mmcboot;" \
--	"run nandboot;"
-+	"gpio clear 54; gpio clear 55;" \
-+	"gpio set 56;" \
-+	"gpio set 57"
- 
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
-@@ -329,9 +308,8 @@
- #endif
- 
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
- 
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451