summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--pcr/openrc-net/PKGBUILD16
-rw-r--r--pcr/openrc-net/autofs5.initd70
-rw-r--r--pcr/openrc-net/hostapd-init.d39
-rw-r--r--pcr/openrc-net/ip6tables-1.4.13.confd19
-rw-r--r--pcr/openrc-net/iptables-1.4.13-r1.init130
-rw-r--r--pcr/openrc-net/iptables-1.4.13.confd19
-rw-r--r--pcr/openrc-net/lighttpd.confd12
-rw-r--r--pcr/openrc-net/lighttpd.initd73
-rw-r--r--pcr/openrc-net/mit-krb5kadmind.initd-r125
-rw-r--r--pcr/openrc-net/mit-krb5kdc.initd-r124
-rw-r--r--pcr/openrc-net/mit-krb5kpropd.initd-r124
-rw-r--r--pcr/openrc-net/nfs.confd38
-rw-r--r--pcr/openrc-net/nfs.initd163
-rw-r--r--pcr/openrc-net/nfsclient.confd18
-rw-r--r--pcr/openrc-net/nfsclient.initd34
-rw-r--r--pcr/openrc-net/nginx.initd-r289
-rw-r--r--pcr/openrc-net/openntpd.conf.d-20080406-r67
-rw-r--r--pcr/openrc-net/openntpd.init.d-20080406-r615
-rw-r--r--pcr/openrc-net/openvpn-2.1.conf18
-rw-r--r--pcr/openrc-net/openvpn-2.1.init133
-rw-r--r--pcr/openrc-net/polipo.initd54
-rw-r--r--pcr/openrc-net/postfix.rc6.2.786
-rw-r--r--pcr/openrc-net/privoxy.initd29
-rw-r--r--pcr/openrc-net/quota.confd20
-rw-r--r--pcr/openrc-net/quota.rc738
-rw-r--r--pcr/openrc-net/rpc.gssd.initd24
-rw-r--r--pcr/openrc-net/rpc.idmapd.initd26
-rw-r--r--pcr/openrc-net/rpc.pipefs.initd33
-rw-r--r--pcr/openrc-net/rpc.rquotad.initd26
-rw-r--r--pcr/openrc-net/rpc.statd.initd33
-rw-r--r--pcr/openrc-net/rpc.svcgssd.initd24
-rw-r--r--pcr/openrc-net/rpc.yppasswdd-r122
-rw-r--r--pcr/openrc-net/rpc.yppasswdd.confd7
-rw-r--r--pcr/openrc-net/rpc.ypxfrd-2.2322
-rw-r--r--pcr/openrc-net/rpc.ypxfrd.confd3
-rw-r--r--pcr/openrc-net/rpcbind.initd22
-rw-r--r--pcr/openrc-net/rsyncd.conf.d5
-rw-r--r--pcr/openrc-net/rsyncd.init.d-r112
-rw-r--r--pcr/openrc-net/samba4.confd38
-rw-r--r--pcr/openrc-net/samba4.initd-r156
-rw-r--r--pcr/openrc-net/slapd-confd-2.4.28-r126
-rw-r--r--pcr/openrc-net/slapd-initd-2.4.28-r136
-rw-r--r--pcr/openrc-net/slpd-init89
-rw-r--r--pcr/openrc-net/squid.confd-r113
-rw-r--r--pcr/openrc-net/squid.initd-r4118
-rw-r--r--pcr/openrc-net/sshd.confd21
-rw-r--r--pcr/openrc-net/sshd.rc6.487
-rw-r--r--pcr/openrc-net/tor.confd3
-rw-r--r--pcr/openrc-net/tor.initd-r660
-rw-r--r--pcr/openrc-net/transmission-daemon.confd.414
-rw-r--r--pcr/openrc-net/transmission-daemon.initd.973
-rw-r--r--pcr/openrc-net/ufw-2.initd137
-rw-r--r--pcr/openrc-net/ufw.confd5
-rw-r--r--pcr/openrc-net/vsftpd-checkconfig.sh29
-rw-r--r--pcr/openrc-net/vsftpd.init51
-rw-r--r--pcr/openrc-net/xinetd.confd3
-rw-r--r--pcr/openrc-net/xinetd.rc633
-rw-r--r--pcr/openrc-net/ypbind.confd-r14
-rw-r--r--pcr/openrc-net/ypbind.initd41
-rw-r--r--pcr/openrc-net/ypserv23
-rw-r--r--pcr/openrc-net/ypserv.confd4
61 files changed, 2408 insertions, 8 deletions
diff --git a/pcr/openrc-net/PKGBUILD b/pcr/openrc-net/PKGBUILD
index a0f5bf1a5..ed3450d63 100644
--- a/pcr/openrc-net/PKGBUILD
+++ b/pcr/openrc-net/PKGBUILD
@@ -116,7 +116,7 @@ pkgname=('autofs-openrc'
'wicd-openrc'
'syncthing-openrc'
'nginx-openrc')
-pkgver=20150119
+pkgver=20150330
pkgrel=1
pkgdesc="OpenRC init scripts"
arch=('any')
@@ -685,7 +685,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
'e8a413e9102948b336f60041fc3cade33125faf56d8319ee65d9f3c63199a8e7'
'a157630c3bdc9565cca8240ee1e6539fc9cbc1e4642c40e0965e3609d1021bac'
'099f668e1ad42ed9446b15675032a1186715d1fe9e4a1b24dfb787e68495d2b6'
- '049a231908dc2c5f82446712d71d5e75d430bd043b53eead1529f2d81e1595ab'
+ 'b5811c6adf10d6210e5685b4e999f0449ac492379d055226eeb140f00d9b8702'
'204aaf81d51dc119cee1d1ff3ae3dd50af666af2f8b2a363fd1bf442d4dcee00'
'916f4b14095ee4ec8a510391c883e9f01868e18d79a3d5cbeb13a104a793d45d'
'b9701b9ea509638ee1ed74bec38a22e6bd7358763497ce53c146d2faf9e97a61'
@@ -697,15 +697,15 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
'c374ea05d7e9f15e10c8f9dbd0cad6548e0f92aef7de33e5dbc27222e9407e7b'
'bb6e6721f33e6582a91025f3500e159a599fb856d699e9394093e1018c7925e0'
'b1515472c32927039b38f6c3a797cbc54a5a300b5d6fa54df9550174afa2b7f8'
- '22bba4ee5d58bae422650875c7c8a797a52fc121ddd02d48297c075b8a35401e'
+ 'c652a4fe8a43dc68a818345db2b3acc560663b5b6c969324d4f23afb0fb96a94'
'1e77bc6fb2ceb266f724818898bd42bec47512a5a7ede6660e0565ea1c58d619'
- 'a1ecfb9441052d374b6bc2b77554a3253a4e4c231c76114b3313d2cc68e561b8'
- '426996fc12758565d4c827762df76634f40cc8915988ab89ba5e81aeb561cf46'
+ 'e8842fca856eae598fb8fe15ed8d3cef13e61851217be66b8cc4087af8cee8ad'
+ '122ade9931af8f64696375c9c66d00f64a90949616e00e9a00a7264c50c2e8a7'
'3ce65326859c43983dad25ad2d4731488c488037796e39b6b5eda336e8bf81ef'
'ebee63e81fb952474c34b745913e8774b29c9cc65180d363a33d991e478aea2d'
'00d9c29280a83e8458c33139d04a9b38c6fdba9d7cb9b420ca83bf6b10e6435d'
'f1c460d8b0e91e54a551397d755135d05a3728d81de596535bf8bda074455677'
- '0c7bd35a14da6c0c2577f09ae82a41ddb693a88157eeaf80684616f79be6c304'
+ 'a5731b8f681111421277c6c1c43b3e1d303790d9f8aebd977a895b0ed7a73bc3'
'5bca003ec3b67c7c78519aede1d82002579006ccfecce8f87b559df719f82e92'
'1fc515a6816b8a750db513df0b3b9bf8dd8bd4c4e9051205521acadfdebeae0f'
'7f228796e020c0779c52683f684197d50662ae890b1ae193ffa9acf157ccd143'
@@ -729,7 +729,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
'069aa7382b40aecebf26ef53f3f4c49890314e0357925c84b3c15f1d0b913be0'
'657b5305923b2a5de9eb96931aaaa28d6e997ace6c40793d905887798094258c'
'2de7c7c1edfe3ae0480e22d988a564db3bb873050929ebb6e8361d7a1288ddda'
- 'e6cf3df546aae57bb10e2b4282a9ccd79741473ef9dbdbd7628a16c84622da06'
+ '4297952eeeb02b5c4f2f750742614513fa6a0c8d291a9a0adcec1ec0098fcd78'
'e401e2cf7c0180a170d3dc3e91d7e98002bae7b013df72813b7bcf89b864fb3a'
'6aeb4ec9b8ccc062b5ee8c609830c05cee3ed790fa90d7b2d8cf82a09e317c5c'
'79f6c6ed4875f00fe702f69e9a6180a032d5a47f3e58e892e6ba0e2746b6fec8'
@@ -746,7 +746,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
'91fb1497b3a6ef0bb3a3d5baefdff801d8ff1cba27aaf742303415550814a09b'
'fca7183a7676f0f471878925c8fbec20b7a0bff01551c0ad2b34d4d8a826c876'
'41d780f291847e19f632428bbf27c3f289414afd237546d2974da1b75384c25c'
- '49da1b5f267927023bc092adcf89d406ec294584039d6bca6b7aea0a9e7c4c4f'
+ '17cfda4d50a3d3fd74f36c79dec78b5f89fe6b45712729d8bbdbddd7e8ea9a10'
'66b2b53b077ddc2d5eb1d81faa99fa0f4f0db01520900ba948001e539bfe02d8'
'eb4a4315916fe3f8688c1da5bb5c249a1f402e61617452288d5b0668078c955c'
'63708b1a7b61ae791df64bb4cefa01dc12236f96bb67fe6d0b2c513e11c81f3e'
diff --git a/pcr/openrc-net/autofs5.initd b/pcr/openrc-net/autofs5.initd
new file mode 100644
index 000000000..939444e02
--- /dev/null
+++ b/pcr/openrc-net/autofs5.initd
@@ -0,0 +1,70 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/autofs/files/autofs5.initd,v 1.4 2013/11/10 15:53:29 tomwij Exp $
+
+DAEMON=/usr/sbin/automount
+PIDFILE=/var/run/autofs.pid
+DEVICE=autofs
+
+depend() {
+ need localmount
+ use ypbind nfs slapd portmap net
+}
+
+extra_started_commands="reload"
+
+start() {
+ ebegin "Starting automounter"
+
+ # Ensure autofs support is loaded
+ grep -q autofs /proc/filesystems || modprobe -q autofs4
+ if [ $? -ne 0 ]; then
+ eend 1 "No autofs support available in kernel"
+ return 1
+ fi
+
+ # Check misc device
+ if [ -n "${USE_MISC_DEVICE}" -a "${USE_MISC_DEVICE}" = "yes" ]; then
+ sleep 1
+ if [ -e "/proc/misc" ]; then
+ MINOR=$(awk "/${DEVICE}/ {print \$1}" /proc/misc)
+ if [ -n "${MINOR}" -a ! -c "/dev/${DEVICE}" ]; then
+ mknod -m 0600 "/dev/${DEVICE}" c 10 ${MINOR}
+ if [ $? -ne 0 ]; then
+ eend 1 "Could not create '/dev/${DEVICE}'"
+ return 1
+ fi
+ fi
+ fi
+ if [ -x /sbin/restorecon -a -c "/dev/${DEVICE}" ]; then
+ /sbin/restorecon "/dev/${DEVICE}"
+ if [ $? -ne 0 ]; then
+ eend 1 "Failed to execute '/sbin/restorecon \"/dev/${DEVICE}\"'"
+ return 1
+ fi
+ fi
+ else
+ [ -c "/dev/${DEVICE}" ] && rm -rf "/dev/${DEVICE}"
+ fi
+
+ start-stop-daemon --start --exec ${DAEMON} -- -p ${PIDFILE} ${OPTIONS}
+
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping automounter"
+ start-stop-daemon --stop --quiet -R TERM/45 -p ${PIDFILE}
+ eend $?
+}
+
+reload() {
+ ebegin "Reloading automounter"
+ if [ ! -r "${PIDFILE}" ]; then
+ eend 1 "automount not running"
+ else
+ kill -s HUP $(cat "${PIDFILE}") 2> /dev/null
+ eend $?
+ fi
+}
diff --git a/pcr/openrc-net/hostapd-init.d b/pcr/openrc-net/hostapd-init.d
new file mode 100644
index 000000000..d09002b66
--- /dev/null
+++ b/pcr/openrc-net/hostapd-init.d
@@ -0,0 +1,39 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/files/hostapd-init.d,v 1.4 2014/03/21 19:47:14 gurligebis Exp $
+
+pidfile="/run/${SVCNAME}.pid"
+command="/usr/sbin/hostapd"
+command_args="-P ${pidfile} -B ${OPTIONS} ${CONFIGS}"
+
+extra_started_commands="reload"
+
+depend() {
+ local myneeds=
+ for iface in ${INTERFACES}; do
+ myneeds="${myneeds} net.${iface}"
+ done
+
+ [ -n "${myneeds}" ] && need ${myneeds}
+ use logger
+}
+
+start_pre() {
+ local file
+
+ for file in ${CONFIGS}; do
+ if [ ! -r "${file}" ]; then
+ eerror "hostapd configuration file (${CONFIG}) not found"
+ return 1
+ fi
+ done
+}
+
+reload() {
+ start_pre || return 1
+
+ ebegin "Reloading ${SVCNAME} configuration"
+ kill -HUP $(cat ${pidfile}) > /dev/null 2>&1
+ eend $?
+}
diff --git a/pcr/openrc-net/ip6tables-1.4.13.confd b/pcr/openrc-net/ip6tables-1.4.13.confd
new file mode 100644
index 000000000..3bb36989d
--- /dev/null
+++ b/pcr/openrc-net/ip6tables-1.4.13.confd
@@ -0,0 +1,19 @@
+# /etc/conf.d/ip6tables
+
+# Location in which iptables initscript will save set rules on
+# service shutdown
+IP6TABLES_SAVE="/var/lib/ip6tables/rules-save"
+
+# Options to pass to iptables-save and iptables-restore
+SAVE_RESTORE_OPTIONS="-c"
+
+# Save state on stopping iptables
+SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
diff --git a/pcr/openrc-net/iptables-1.4.13-r1.init b/pcr/openrc-net/iptables-1.4.13-r1.init
new file mode 100644
index 000000000..a63d07688
--- /dev/null
+++ b/pcr/openrc-net/iptables-1.4.13-r1.init
@@ -0,0 +1,130 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.13-r1.init,v 1.3 2013/04/27 17:29:09 vapier Exp $
+
+extra_commands="check save panic"
+extra_started_commands="reload"
+
+iptables_name=${SVCNAME}
+case ${iptables_name} in
+iptables|ip6tables) ;;
+*) iptables_name="iptables" ;;
+esac
+
+iptables_bin="/sbin/${iptables_name}"
+case ${iptables_name} in
+ iptables) iptables_proc="/proc/net/ip_tables_names"
+ iptables_save=${IPTABLES_SAVE};;
+ ip6tables) iptables_proc="/proc/net/ip6_tables_names"
+ iptables_save=${IP6TABLES_SAVE};;
+esac
+
+depend() {
+ need localmount #434774
+ before net
+}
+
+set_table_policy() {
+ local chains table=$1 policy=$2
+ case ${table} in
+ nat) chains="PREROUTING POSTROUTING OUTPUT";;
+ mangle) chains="PREROUTING INPUT FORWARD OUTPUT POSTROUTING";;
+ filter) chains="INPUT FORWARD OUTPUT";;
+ *) chains="";;
+ esac
+ local chain
+ for chain in ${chains} ; do
+ ${iptables_bin} -t ${table} -P ${chain} ${policy}
+ done
+}
+
+checkkernel() {
+ if [ ! -e ${iptables_proc} ] ; then
+ eerror "Your kernel lacks ${iptables_name} support, please load"
+ eerror "appropriate modules and try again."
+ return 1
+ fi
+ return 0
+}
+checkconfig() {
+ if [ ! -f ${iptables_save} ] ; then
+ eerror "Not starting ${iptables_name}. First create some rules then run:"
+ eerror "/etc/init.d/${iptables_name} save"
+ return 1
+ fi
+ return 0
+}
+
+start() {
+ checkconfig || return 1
+ ebegin "Loading ${iptables_name} state and starting firewall"
+ ${iptables_bin}-restore ${SAVE_RESTORE_OPTIONS} < "${iptables_save}"
+ eend $?
+}
+
+stop() {
+ if [ "${SAVE_ON_STOP}" = "yes" ] ; then
+ save || return 1
+ fi
+ checkkernel || return 1
+ ebegin "Stopping firewall"
+ local a
+ for a in $(cat ${iptables_proc}) ; do
+ set_table_policy $a ACCEPT
+
+ ${iptables_bin} -F -t $a
+ ${iptables_bin} -X -t $a
+ done
+ eend $?
+}
+
+reload() {
+ checkkernel || return 1
+ checkrules || return 1
+ ebegin "Flushing firewall"
+ local a
+ for a in $(cat ${iptables_proc}) ; do
+ ${iptables_bin} -F -t $a
+ ${iptables_bin} -X -t $a
+ done
+ eend $?
+
+ start
+}
+
+checkrules() {
+ ebegin "Checking rules"
+ ${iptables_bin}-restore --test ${SAVE_RESTORE_OPTIONS} < "${iptables_save}"
+ eend $?
+}
+
+check() {
+ # Short name for users of init.d script.
+ checkrules
+}
+
+save() {
+ ebegin "Saving ${iptables_name} state"
+ checkpath -q -d "$(dirname "${iptables_save}")"
+ checkpath -q -m 0600 -f "${iptables_save}"
+ ${iptables_bin}-save ${SAVE_RESTORE_OPTIONS} > "${iptables_save}"
+ eend $?
+}
+
+panic() {
+ checkkernel || return 1
+ if service_started ${iptables_name}; then
+ rc-service ${iptables_name} stop
+ fi
+
+ local a
+ ebegin "Dropping all packets"
+ for a in $(cat ${iptables_proc}) ; do
+ ${iptables_bin} -F -t $a
+ ${iptables_bin} -X -t $a
+
+ set_table_policy $a DROP
+ done
+ eend $?
+}
diff --git a/pcr/openrc-net/iptables-1.4.13.confd b/pcr/openrc-net/iptables-1.4.13.confd
new file mode 100644
index 000000000..7225374c3
--- /dev/null
+++ b/pcr/openrc-net/iptables-1.4.13.confd
@@ -0,0 +1,19 @@
+# /etc/conf.d/iptables
+
+# Location in which iptables initscript will save set rules on
+# service shutdown
+IPTABLES_SAVE="/var/lib/iptables/rules-save"
+
+# Options to pass to iptables-save and iptables-restore
+SAVE_RESTORE_OPTIONS="-c"
+
+# Save state on stopping iptables
+SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
diff --git a/pcr/openrc-net/lighttpd.confd b/pcr/openrc-net/lighttpd.confd
new file mode 100644
index 000000000..f3afb07a5
--- /dev/null
+++ b/pcr/openrc-net/lighttpd.confd
@@ -0,0 +1,12 @@
+# /etc/conf.d/lighttpd
+
+# Location of a shell used by the 'include_shell' directive
+# in the lighttpd's configuration file
+#export SHELL="/bin/bash"
+
+# Location of the lighttpd configuration file
+LIGHTTPD_CONF="/etc/lighttpd/lighttpd.conf"
+
+# Location of the lighttpd pid file
+LIGHTTPD_PID="$(/usr/bin/awk '/^server.pid-file/{s=$3};{sub("\"","",s)};END{print s}' ${LIGHTTPD_CONF})"
+
diff --git a/pcr/openrc-net/lighttpd.initd b/pcr/openrc-net/lighttpd.initd
new file mode 100644
index 000000000..43626c026
--- /dev/null
+++ b/pcr/openrc-net/lighttpd.initd
@@ -0,0 +1,73 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/lighttpd/files/lighttpd.initd,v 1.22 2013/02/06 19:36:51 hwoarang Exp $
+
+extra_started_commands="reload graceful"
+
+depend() {
+ need net
+ use mysql logger spawn-fcgi ldap slapd netmount dns
+ after famd
+ after sshd
+}
+
+checkconfig() {
+ if [ ! -f "${LIGHTTPD_CONF}" ] ; then
+ ewarn "${LIGHTTPD_CONF} does not exist."
+ return 1
+ fi
+
+ if [ -z "${LIGHTTPD_PID}" ] ; then
+ ewarn "server.pid-file variable in ${LIGHTTPD_CONF}"
+ ewarn "is not set. Falling back to lighttpd.pid"
+ LIGHTTPD_PID="/run/lighttpd.pid"
+ fi
+ /usr/sbin/lighttpd -t -f ${LIGHTTPD_CONF} >/dev/null
+}
+
+start() {
+ checkconfig || return 1
+ checkpath -d -q -m 0750 -o lighttpd:lighttpd /run/lighttpd/
+
+ ebegin "Starting lighttpd"
+ start-stop-daemon --start --quiet --exec /usr/sbin/lighttpd \
+ --pidfile "${LIGHTTPD_PID}" -- -f "${LIGHTTPD_CONF}"
+ eend $?
+}
+
+stop() {
+ local rv=0
+ ebegin "Stopping lighttpd"
+ start-stop-daemon --stop --quiet --pidfile "${LIGHTTPD_PID}"
+ eend $?
+}
+
+reload() {
+ if ! service_started "${SVCNAME}" ; then
+ eerror "${SVCNAME} isn't running"
+ return 1
+ fi
+ checkconfig || return 1
+
+ ebegin "Re-opening lighttpd log files"
+ start-stop-daemon --quiet --pidfile "${LIGHTTPD_PID}" \
+ --signal HUP
+ eend $?
+}
+
+graceful() {
+ if ! service_started "${SVCNAME}" ; then
+ eerror "${SVCNAME} isn't running"
+ return 1
+ fi
+ checkconfig || return 1
+
+ ebegin "Gracefully stopping lighttpd"
+ start-stop-daemon --quiet --pidfile "${LIGHTTPD_PID}" \
+ --signal INT
+ if eend $? ; then
+ rm -f "${LIGHTTPD_PID}"
+ start
+ fi
+}
diff --git a/pcr/openrc-net/mit-krb5kadmind.initd-r1 b/pcr/openrc-net/mit-krb5kadmind.initd-r1
new file mode 100644
index 000000000..7b28fb2ae
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kadmind.initd-r1
@@ -0,0 +1,25 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 Admin daemon
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 Admin daemon"
+exec="/usr/sbin/kadmind"
+
+depend() {
+ need mit-krb5kdc
+ use net
+}
+
+start() {
+ ebegin "Starting $daemon"
+ start-stop-daemon --start --quiet --exec ${exec} 1>&2
+ eend $? "Error starting $daemon"
+}
+
+stop() {
+ ebegin "Stopping $daemon"
+ start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+ eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/mit-krb5kdc.initd-r1 b/pcr/openrc-net/mit-krb5kdc.initd-r1
new file mode 100644
index 000000000..94f1f7937
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kdc.initd-r1
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 KDC
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 KDC"
+exec="/usr/sbin/krb5kdc"
+
+depend() {
+ use net
+}
+
+start() {
+ ebegin "Starting $daemon"
+ start-stop-daemon --start --quiet --exec ${exec} 1>&2
+ eend $? "Error starting $daemon"
+}
+
+stop() {
+ ebegin "Stopping $daemon"
+ start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+ eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/mit-krb5kpropd.initd-r1 b/pcr/openrc-net/mit-krb5kpropd.initd-r1
new file mode 100644
index 000000000..d800d666a
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kpropd.initd-r1
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 kpropd
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 kpropd"
+exec="/usr/sbin/kpropd"
+
+depend() {
+ use net mit-krb5kdc mit-krb5kadmind
+}
+
+start() {
+ ebegin "Starting $daemon"
+ start-stop-daemon --start --quiet --exec ${exec} -- -S 1>&2
+ eend $? "Error starting $daemon"
+}
+
+stop() {
+ ebegin "Stopping $daemon"
+ start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+ eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/nfs.confd b/pcr/openrc-net/nfs.confd
new file mode 100644
index 000000000..9dc14058c
--- /dev/null
+++ b/pcr/openrc-net/nfs.confd
@@ -0,0 +1,38 @@
+# /etc/conf.d/nfs
+
+# If you wish to set the port numbers for lockd,
+# please see /etc/sysctl.conf
+
+# Optional services to include in default `/etc/init.d/nfs start`
+# For NFSv4 users, you'll want to add "rpc.idmapd" here.
+NFS_NEEDED_SERVICES=""
+
+# Options to pass to rpc.nfsd
+OPTS_RPC_NFSD="8"
+
+# Options to pass to rpc.mountd
+# ex. OPTS_RPC_MOUNTD="-p 32767"
+OPTS_RPC_MOUNTD=""
+
+# Options to pass to rpc.statd
+# ex. OPTS_RPC_STATD="-p 32765 -o 32766"
+OPTS_RPC_STATD=""
+
+# Options to pass to rpc.idmapd
+OPTS_RPC_IDMAPD=""
+
+# Options to pass to rpc.gssd
+OPTS_RPC_GSSD=""
+
+# Options to pass to rpc.svcgssd
+OPTS_RPC_SVCGSSD=""
+
+# Options to pass to rpc.rquotad (requires sys-fs/quota)
+OPTS_RPC_RQUOTAD=""
+
+# Timeout (in seconds) for exportfs
+EXPORTFS_TIMEOUT=30
+
+# Options to set in the nfsd filesystem (/proc/fs/nfsd/).
+# Format is <option>=<value>. Multiple options are allowed.
+#OPTS_NFSD="nfsv4leasetime=30 max_block_size=4096"
diff --git a/pcr/openrc-net/nfs.initd b/pcr/openrc-net/nfs.initd
new file mode 100644
index 000000000..e4239b70c
--- /dev/null
+++ b/pcr/openrc-net/nfs.initd
@@ -0,0 +1,163 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/nfs.initd,v 1.28 2014/06/20 06:21:22 vapier Exp $
+
+extra_started_commands="reload"
+
+# This variable is used for controlling whether or not to run exportfs -ua;
+# see stop() for more information
+restarting=no
+
+# The binary locations
+exportfs=/usr/sbin/exportfs
+ mountd=/usr/sbin/rpc.mountd
+ nfsd=/usr/sbin/rpc.nfsd
+smnotify=/usr/sbin/sm-notify
+
+depend() {
+ local myneed=""
+ # XXX: no way to detect NFSv4 is desired and so need rpc.idmapd
+ myneed="${myneed} $(
+ awk '!/^[[:space:]]*#/ {
+ # clear the path to avoid spurious matches
+ $1 = "";
+ if ($0 ~ /[(][^)]*sec=(krb|spkm)[^)]*[)]/) {
+ print "rpc.svcgssd"
+ exit 0
+ }
+ }' /etc/exports /etc/exports.d/*.exports 2>/dev/null
+ )"
+ config /etc/exports /etc/exports.d/*.exports
+ need portmap rpc.statd ${myneed} ${NFS_NEEDED_SERVICES}
+ use ypbind net dns rpc.rquotad rpc.idmapd rpc.svcgssd
+ after quota
+}
+
+mkdir_nfsdirs() {
+ local d
+ for d in v4recovery v4root ; do
+ d="/var/lib/nfs/${d}"
+ [ ! -d "${d}" ] && mkdir -p "${d}"
+ done
+}
+
+waitfor_exportfs() {
+ local pid=$1
+ ( sleep ${EXPORTFS_TIMEOUT:-30}; kill -9 ${pid} 2>/dev/null ) &
+ wait $1
+}
+
+mount_nfsd() {
+ if [ -e /proc/modules ] ; then
+ # Make sure nfs support is loaded in the kernel #64709
+ if ! grep -qs nfsd /proc/filesystems ; then
+ modprobe -q nfsd
+ fi
+ # Restart idmapd if needed #220747
+ if grep -qs nfsd /proc/modules ; then
+ killall -q -HUP rpc.idmapd
+ fi
+ fi
+
+ # This is the new "kernel 2.6 way" to handle the exports file
+ if grep -qs nfsd /proc/filesystems ; then
+ if ! mountinfo -q /proc/fs/nfsd ; then
+ ebegin "Mounting nfsd filesystem in /proc"
+ mount -t nfsd -o nodev,noexec,nosuid nfsd /proc/fs/nfsd
+ eend $?
+ fi
+
+ local o
+ for o in ${OPTS_NFSD} ; do
+ echo "${o#*=}" > "/proc/fs/nfsd/${o%%=*}"
+ done
+ fi
+}
+
+start_it() {
+ ebegin "Starting NFS $1"
+ shift
+ "$@"
+ eend $?
+ ret=$((ret + $?))
+}
+start() {
+ mount_nfsd
+ mkdir_nfsdirs
+
+ # Exportfs likes to hang if networking isn't working.
+ # If that's the case, then try to kill it so the
+ # bootup process can continue.
+ if grep -qs '^[[:space:]]*/' /etc/exports /etc/exports.d/*.exports ; then
+ ebegin "Exporting NFS directories"
+ ${exportfs} -r &
+ waitfor_exportfs $!
+ eend $?
+ fi
+
+ local ret=0
+ start_it mountd ${mountd} ${OPTS_RPC_MOUNTD}
+ start_it daemon ${nfsd} ${OPTS_RPC_NFSD}
+ [ -x "${smnotify}" ] && start_it smnotify ${smnotify} ${OPTS_SMNOTIFY}
+ return ${ret}
+}
+
+stop() {
+ local ret=0
+
+ ebegin "Stopping NFS mountd"
+ start-stop-daemon --stop --exec ${mountd}
+ eend $?
+ ret=$((ret + $?))
+
+ # nfsd sets its process name to [nfsd] so don't look for $nfsd
+ ebegin "Stopping NFS daemon"
+ start-stop-daemon --stop --name nfsd --user root --signal 2
+ eend $?
+ ret=$((ret + $?))
+ # in case things don't work out ... #228127
+ rpc.nfsd 0
+
+ # When restarting the NFS server, running "exportfs -ua" probably
+ # isn't what the user wants. Running it causes all entries listed
+ # in xtab to be removed from the kernel export tables, and the
+ # xtab file is cleared. This effectively shuts down all NFS
+ # activity, leaving all clients holding stale NFS filehandles,
+ # *even* when the NFS server has restarted.
+ #
+ # That's what you would want if you were shutting down the NFS
+ # server for good, or for a long period of time, but not when the
+ # NFS server will be running again in short order. In this case,
+ # then "exportfs -r" will reread the xtab, and all the current
+ # clients will be able to resume NFS activity, *without* needing
+ # to umount/(re)mount the filesystem.
+ if [ "${restarting}" = no -o "${RC_CMD}" = "restart" ] ; then
+ ebegin "Unexporting NFS directories"
+ # Exportfs likes to hang if networking isn't working.
+ # If that's the case, then try to kill it so the
+ # shutdown process can continue.
+ ${exportfs} -ua &
+ waitfor_exportfs $!
+ eend $?
+ fi
+
+ return ${ret}
+}
+
+reload() {
+ # Exportfs likes to hang if networking isn't working.
+ # If that's the case, then try to kill it so the
+ # bootup process can continue.
+ ebegin "Reloading /etc/exports"
+ ${exportfs} -r 1>&2 &
+ waitfor_exportfs $!
+ eend $?
+}
+
+restart() {
+ # See long comment in stop() regarding "restarting" and exportfs -ua
+ restarting=yes
+ svc_stop
+ svc_start
+}
diff --git a/pcr/openrc-net/nfsclient.confd b/pcr/openrc-net/nfsclient.confd
new file mode 100644
index 000000000..8a995571e
--- /dev/null
+++ b/pcr/openrc-net/nfsclient.confd
@@ -0,0 +1,18 @@
+# You need to decide which nfs protocol version you want to use.
+# If you are unsure, leave these alone.
+#
+# If you are using only nfsv4, uncomment this line:
+#
+#rc_need="!rpc.statd"
+#
+# If you are using only nfsv3, uncomment this line:
+#
+#rc_need="!rpc.idmapd"
+#
+# You will need to set the dependencies in the nfsclient script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself. See /etc/conf.d/netmount for more examples.
+#
+# This is a safe default.
+rc_after="net"
diff --git a/pcr/openrc-net/nfsclient.initd b/pcr/openrc-net/nfsclient.initd
new file mode 100644
index 000000000..72ba9a963
--- /dev/null
+++ b/pcr/openrc-net/nfsclient.initd
@@ -0,0 +1,34 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/nfsclient.initd,v 1.5 2015/02/05 04:32:41 williamh Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+ local opts myneed=""
+ if [ -e /etc/fstab ] ; then
+ for opts in $(fstabinfo -o -t nfs,nfs4) ; do
+ case $opts in
+ *sec=krb*|*sec=spkm*) myneed="$myneed rpc.gssd" ;;
+ esac
+ done
+ fi
+ config /etc/fstab
+ need portmap rpc.statd rpc.idmapd ${myneed}
+ use ypbind dns
+}
+
+start() {
+ if [ -x /usr/sbin/sm-notify ] ; then
+ ebegin "Starting NFS sm-notify"
+ /usr/sbin/sm-notify ${OPTS_SMNOTIFY}
+ eend $?
+ fi
+
+ # Make sure nfs support is loaded in the kernel #64709
+ if [ -e /proc/modules ] && ! grep -qs 'nfs$' /proc/filesystems ; then
+ modprobe -q nfs
+ fi
+ return 0
+}
diff --git a/pcr/openrc-net/nginx.initd-r2 b/pcr/openrc-net/nginx.initd-r2
new file mode 100644
index 000000000..903670955
--- /dev/null
+++ b/pcr/openrc-net/nginx.initd-r2
@@ -0,0 +1,89 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/nginx/files/nginx.initd-r2,v 1.1 2013/05/13 12:18:11 dev-zero Exp $
+
+extra_commands="configtest"
+extra_started_commands="upgrade reload"
+
+description="Robust, small and high performance http and reverse proxy server"
+description_configtest="Run nginx' internal config check."
+description_upgrade="Upgrade the nginx binary without losing connections."
+description_reload="Reload the nginx configuration without losing connections."
+
+nginx_config=${nginx_config:-/etc/nginx/nginx.conf}
+
+command="/usr/sbin/nginx"
+command_args="-c ${nginx_config}"
+pidfile=${pidfile:-/run/nginx.pid}
+user=${user:-nginx}
+group=${group:-nginx}
+
+depend() {
+ need net
+ use dns logger netmount
+}
+
+start_pre() {
+ if [ "${RC_CMD}" != "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_pre() {
+ if [ "${RC_CMD}" = "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_post() {
+ rm -f ${pidfile}
+}
+
+reload() {
+ configtest || return 1
+ ebegin "Refreshing nginx' configuration"
+ kill -HUP `cat ${pidfile}` &>/dev/null
+ eend $? "Failed to reload nginx"
+}
+
+upgrade() {
+ configtest || return 1
+ ebegin "Upgrading nginx"
+
+ einfo "Sending USR2 to old binary"
+ kill -USR2 `cat ${pidfile}` &>/dev/null
+
+ einfo "Sleeping 3 seconds before pid-files checking"
+ sleep 3
+
+ if [ ! -f ${pidfile}.oldbin ]; then
+ eerror "File with old pid not found"
+ return 1
+ fi
+
+ if [ ! -f ${pidfile} ]; then
+ eerror "New binary failed to start"
+ return 1
+ fi
+
+ einfo "Sleeping 3 seconds before WINCH"
+ sleep 3 ; kill -WINCH `cat ${pidfile}.oldbin`
+
+ einfo "Sending QUIT to old binary"
+ kill -QUIT `cat ${pidfile}.oldbin`
+
+ einfo "Upgrade completed"
+ eend $? "Upgrade failed"
+}
+
+configtest() {
+ ebegin "Checking nginx' configuration"
+ ${command} -c ${nginx_config} -t -q
+
+ if [ $? -ne 0 ]; then
+ ${command} -c ${nginx_config} -t
+ fi
+
+ eend $? "failed, please correct errors above"
+}
diff --git a/pcr/openrc-net/openntpd.conf.d-20080406-r6 b/pcr/openrc-net/openntpd.conf.d-20080406-r6
new file mode 100644
index 000000000..ccd454596
--- /dev/null
+++ b/pcr/openrc-net/openntpd.conf.d-20080406-r6
@@ -0,0 +1,7 @@
+# /etc/conf.d/ntpd: config file for openntpd's ntpd
+
+# See ntpd(8) man page ... some popular options:
+# -s Set the time immediately at startup
+# (Note: may cause up to a 15 second startup delay
+# if ntp servers not reachable)
+NTPD_OPTS=""
diff --git a/pcr/openrc-net/openntpd.init.d-20080406-r6 b/pcr/openrc-net/openntpd.init.d-20080406-r6
new file mode 100644
index 000000000..2f452e0fd
--- /dev/null
+++ b/pcr/openrc-net/openntpd.init.d-20080406-r6
@@ -0,0 +1,15 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/openntpd/files/openntpd.init.d-20080406-r6,v 1.1 2013/12/02 13:32:12 ottxor Exp $
+
+name="OpenNTPD"
+command="/usr/sbin/ntpd"
+pidfile="/run/ntpd.pid"
+command_args="-p ${pidfile} ${NTPD_OPTS}"
+
+depend() {
+ need net
+ after ntp-client
+ use dns logger
+}
diff --git a/pcr/openrc-net/openvpn-2.1.conf b/pcr/openrc-net/openvpn-2.1.conf
new file mode 100644
index 000000000..72510c34a
--- /dev/null
+++ b/pcr/openrc-net/openvpn-2.1.conf
@@ -0,0 +1,18 @@
+# OpenVPN automatically creates an /etc/resolv.conf (or sends it to
+# resolvconf) if given DNS information by the OpenVPN server.
+# Set PEER_DNS="no" to stop this.
+PEER_DNS="yes"
+
+# OpenVPN can run in many modes. Most people will want the init script
+# to automatically detect the mode and try and apply a good default
+# configuration and setup scripts. However, there are cases where the
+# OpenVPN configuration looks like a client, but it's really a peer or
+# something else. DETECT_CLIENT controls this behaviour.
+DETECT_CLIENT="yes"
+
+# If DETECT_CLIENT is no and you have your own scripts to re-enter the openvpn
+# init script (ie, it first becomes "inactive" and the script then starts the
+# script again to make it "started") then you can state this below.
+# In other words, unless you understand service dependencies and are a
+# competent shell scripter, don't set this.
+RE_ENTER="no"
diff --git a/pcr/openrc-net/openvpn-2.1.init b/pcr/openrc-net/openvpn-2.1.init
new file mode 100644
index 000000000..d65e6f8bd
--- /dev/null
+++ b/pcr/openrc-net/openvpn-2.1.init
@@ -0,0 +1,133 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+VPNDIR=${VPNDIR:-/etc/openvpn}
+VPN=${SVCNAME#*.}
+if [ -n "${VPN}" ] && [ ${SVCNAME} != "openvpn" ]; then
+ VPNPID="/var/run/openvpn.${VPN}.pid"
+else
+ VPNPID="/var/run/openvpn.pid"
+fi
+VPNCONF="${VPNDIR}/${VPN}.conf"
+
+depend() {
+ need localmount net
+ use dns
+ after bootmisc
+}
+
+checkconfig() {
+ # Linux has good dynamic tun/tap creation
+ if [ $(uname -s) = "Linux" ] ; then
+ if [ ! -e /dev/net/tun ]; then
+ if ! modprobe tun ; then
+ eerror "TUN/TAP support is not available" \
+ "in this kernel"
+ return 1
+ fi
+ fi
+ if [ -h /dev/net/tun ] && [ -c /dev/misc/net/tun ]; then
+ ebegin "Detected broken /dev/net/tun symlink, fixing..."
+ rm -f /dev/net/tun
+ ln -s /dev/misc/net/tun /dev/net/tun
+ eend $?
+ fi
+ return 0
+ fi
+
+ # Other OS's don't, so we rely on a pre-configured interface
+ # per vpn instance
+ local ifname=$(sed -n -e 's/[[:space:]]*dev[[:space:]][[:space:]]*\([^[:space:]]*\).*/\1/p' "${VPNCONF}")
+ if [ -z ${ifname} ] ; then
+ eerror "You need to specify the interface that this openvpn" \
+ "instance should use" \
+ "by using the dev option in ${VPNCONF}"
+ return 1
+ fi
+
+ if ! ifconfig "${ifname}" >/dev/null 2>/dev/null ; then
+ # Try and create it
+ echo > /dev/"${ifname}" >/dev/null
+ fi
+ if ! ifconfig "${ifname}" >/dev/null 2>/dev/null ; then
+ eerror "${VPNCONF} requires interface ${ifname}" \
+ "but that does not exist"
+ return 1
+ fi
+}
+
+start() {
+ # If we are re-called by the openvpn gentoo-up.sh script
+ # then we don't actually want to start openvpn
+ [ "${IN_BACKGROUND}" = "true" ] && return 0
+
+ ebegin "Starting ${SVCNAME}"
+
+ checkconfig || return 1
+
+ local args="" reenter=${RE_ENTER:-no}
+ # If the config file does not specify the cd option, we do
+ # But if we specify it, we override the config option which we do not want
+ if ! grep -q "^[ ]*cd[ ].*" "${VPNCONF}" ; then
+ args="${args} --cd ${VPNDIR}"
+ fi
+
+ # We mark the service as inactive and then start it.
+ # When we get an authenticated packet from the peer then we run our script
+ # which configures our DNS if any and marks us as up.
+ if [ "${DETECT_CLIENT:-yes}" = "yes" ] && \
+ grep -q "^[ ]*remote[ ].*" "${VPNCONF}" ; then
+ reenter="yes"
+ args="${args} --up-delay --up-restart"
+ args="${args} --script-security 2"
+ args="${args} --up /etc/openvpn/up.sh"
+ args="${args} --down-pre --down /etc/openvpn/down.sh"
+
+ # Warn about setting scripts as we override them
+ if grep -Eq "^[ ]*(up|down)[ ].*" "${VPNCONF}" ; then
+ ewarn "WARNING: You have defined your own up/down scripts"
+ ewarn "As you're running as a client, we now force Gentoo specific"
+ ewarn "scripts to be run for up and down events."
+ ewarn "These scripts will call /etc/openvpn/${SVCNAME}-{up,down}.sh"
+ ewarn "where you can put your own code."
+ fi
+
+ # Warn about the inability to change ip/route/dns information when
+ # dropping privs
+ if grep -q "^[ ]*user[ ].*" "${VPNCONF}" ; then
+ ewarn "WARNING: You are dropping root privileges!"
+ ewarn "As such openvpn may not be able to change ip, routing"
+ ewarn "or DNS configuration."
+ fi
+ else
+ # So we're a server. Run as openvpn unless otherwise specified
+ grep -q "^[ ]*user[ ].*" "${VPNCONF}" || args="${args} --user openvpn"
+ grep -q "^[ ]*group[ ].*" "${VPNCONF}" || args="${args} --group openvpn"
+ fi
+
+ # Ensure that our scripts get the PEER_DNS variable
+ [ -n "${PEER_DNS}" ] && args="${args} --setenv PEER_DNS ${PEER_DNS}"
+
+ [ "${reenter}" = "yes" ] && mark_service_inactive "${SVCNAME}"
+ start-stop-daemon --start --exec /usr/sbin/openvpn --pidfile "${VPNPID}" \
+ -- --config "${VPNCONF}" --writepid "${VPNPID}" --daemon \
+ --setenv SVCNAME "${SVCNAME}" ${args}
+ eend $? "Check your logs to see why startup failed"
+}
+
+stop() {
+ # If we are re-called by the openvpn gentoo-down.sh script
+ # then we don't actually want to stop openvpn
+ if [ "${IN_BACKGROUND}" = "true" ] ; then
+ mark_service_inactive "${SVCNAME}"
+ return 0
+ fi
+
+ ebegin "Stopping ${SVCNAME}"
+ start-stop-daemon --stop --quiet \
+ --exec /usr/sbin/openvpn --pidfile "${VPNPID}"
+ eend $?
+}
+
+# vim: set ts=4 :
diff --git a/pcr/openrc-net/polipo.initd b/pcr/openrc-net/polipo.initd
new file mode 100644
index 000000000..9074050c2
--- /dev/null
+++ b/pcr/openrc-net/polipo.initd
@@ -0,0 +1,54 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/polipo/files/Attic/polipo.initd,v 1.7 2015/01/12 16:16:12 bircoph dead $
+
+depend() {
+ need net
+}
+
+checkconfig() {
+ { polipo -v || return 1 ; } | {
+ local retvalue=0
+ local name type value desc
+ while read name type value desc ; do
+ case ${name} in
+ configFile)
+ if [ "${value}" = "(none)" ] ; then
+ eerror "Unable to read configuration file /etc/polipo/config"
+ retvalue=1
+ fi
+ ;;
+ daemonise)
+ if [ "${value}" != "false" ] ; then
+ eerror "Configuration option not supported by this init script: ${name}=${value}"
+ retvalue=1
+ fi
+ ;;
+ pidFile)
+ if [ "${value}" != "(none)" ] ; then
+ eerror "Configuration option not supported by this init script: ${name}=${value}"
+ retvalue=1
+ fi
+ ;;
+ esac
+ done
+ return ${retvalue}
+ }
+}
+
+start() {
+ checkconfig || return 1
+
+ ebegin "Starting Polipo HTTP proxy"
+ start-stop-daemon --start --user polipo \
+ --background --pidfile /var/run/polipo.pid --make-pidfile \
+ --exec /usr/bin/polipo
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping Polipo HTTP proxy"
+ start-stop-daemon --stop --pidfile /var/run/polipo.pid
+ eend $?
+}
diff --git a/pcr/openrc-net/postfix.rc6.2.7 b/pcr/openrc-net/postfix.rc6.2.7
new file mode 100644
index 000000000..aecd8e71f
--- /dev/null
+++ b/pcr/openrc-net/postfix.rc6.2.7
@@ -0,0 +1,86 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.7,v 1.2 2012/03/07 10:27:37 eras Exp $
+
+extra_started_commands="reload abort flush"
+
+description_reload="Re-read configuration files. Running processes terminate at their earliest convenience."
+description_abort="Stop the Postfix mail system abruptly. Running processes are signaled to stop immediately."
+description_flush="Force delivery: attempt to deliver every message in the deferred mail queue."
+
+# Please read http://www.postfix.org/MULTI_INSTANCE_README.html for multi instance support
+CONF_DIR="/etc/postfix"
+CONF_OPT="${SVCNAME##*.}"
+if [ -n ${CONF_OPT} -a ${SVCNAME} != "postfix" ]; then
+ CONF_DIR="${CONF_DIR}.${CONF_OPT}"
+fi
+if [ "${CONF_DIR}" = "/etc/postfix" ]; then
+ CONF_PARAM=""
+ CONF_MESSAGE=""
+else
+ CONF_PARAM="-c ${CONF_DIR}"
+ CONF_MESSAGE="(${CONF_DIR})"
+fi
+
+depend() {
+ use logger dns ypbind amavisd antivirus postfix_greylist net saslauthd
+ if [ "${SVCNAME}" = "postfix" ]; then
+ provide mta
+ fi
+}
+
+start() {
+ if [ ! -z "${CONF_PARAM}" ]; then
+ einfo "Please consider updating your config for postmulti support."
+ fi
+ ebegin "Starting postfix ${CONF_MESSAGE}"
+ if [ ! -d ${CONF_DIR} ]; then
+ eend 1 "${CONF_DIR} does not exist"
+ return 1
+ fi
+ /usr/sbin/postfix ${CONF_PARAM} start >/dev/null 2>&1
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping postfix ${CONF_MESSAGE}"
+ /usr/sbin/postfix ${CONF_PARAM} stop >/dev/null 2>&1
+ eend
+}
+
+status() {
+ local _retval
+ einfon ""
+ /usr/sbin/postfix ${CONF_PARAM} status
+ _retval=$?
+ if [ x${_retval} = 'x0' ]; then
+ mark_service_started "${SVCNAME}"
+ eend 0
+ else
+ mark_service_stopped "${SVCNAME}"
+ eend 3
+ fi
+}
+
+reload() {
+ ebegin "Reloading postfix ${CONF_MESSAGE}"
+ /usr/sbin/postfix ${CONF_PARAM} reload >/dev/null 2>&1
+ eend $?
+}
+
+abort() {
+ ebegin "Aborting postfix ${CONF_MESSAGE}"
+
+ if service_started "${SVCNAME}"; then
+ mark_service_stopped "${SVCNAME}"
+ fi
+ /usr/sbin/postfix ${CONF_PARAM} abort >/dev/null 2>&1
+ eend $?
+}
+
+flush() {
+ ebegin "Flushing postfix ${CONF_MESSAGE}"
+ /usr/sbin/postfix ${CONF_PARAM} flush >/dev/null 2>&1
+ eend $?
+}
diff --git a/pcr/openrc-net/privoxy.initd b/pcr/openrc-net/privoxy.initd
new file mode 100644
index 000000000..84d6186d9
--- /dev/null
+++ b/pcr/openrc-net/privoxy.initd
@@ -0,0 +1,29 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/privoxy/files/privoxy.initd,v 1.2 2007/11/14 05:14:56 mrness Exp $
+
+CONFFILE=/etc/${SVCNAME}/config
+PIDFILE=/var/run/${SVCNAME}.pid
+
+depend() {
+ need net
+}
+
+start() {
+ if [ ! -f "${CONFFILE}" ]; then
+ eerror "Configuration file ${CONFFILE} not found!"
+ return 1
+ fi
+
+ ebegin "Starting privoxy"
+ start-stop-daemon --start --quiet --exec /usr/sbin/privoxy --pidfile "${PIDFILE}" \
+ -- --pidfile "${PIDFILE}" --user privoxy.privoxy "${CONFFILE}" #2>/dev/null
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping privoxy"
+ start-stop-daemon --stop --quiet --pidfile "${PIDFILE}"
+ eend $?
+}
diff --git a/pcr/openrc-net/quota.confd b/pcr/openrc-net/quota.confd
new file mode 100644
index 000000000..6e66c88dd
--- /dev/null
+++ b/pcr/openrc-net/quota.confd
@@ -0,0 +1,20 @@
+# /etc/conf.d/quota: config file for /etc/init.d/quota
+
+# Note: if your console is hooked up to a serial terminal,
+# you prob want to drop the '-v' from the OPTS vars below.
+
+
+# Run quotacheck ?
+RUN_QUOTACHECK="yes"
+
+
+# Options for quotacheck
+QUOTACHECK_OPTS="-avug"
+
+
+# Options for quotaon
+QUOTAON_OPTS="-avug"
+
+
+# Options for quotaoff
+QUOTAOFF_OPTS="-avug"
diff --git a/pcr/openrc-net/quota.rc7 b/pcr/openrc-net/quota.rc7
new file mode 100644
index 000000000..23f8c1536
--- /dev/null
+++ b/pcr/openrc-net/quota.rc7
@@ -0,0 +1,38 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/quota.rc7,v 1.2 2012/12/08 19:50:27 vapier Exp $
+
+extra_started_commands="check"
+description_check="Running quotacheck with quota being offline"
+
+depend() {
+ need localmount
+ use portmap
+}
+
+start() {
+ if [ "${RUN_QUOTACHECK}" = "yes" ] ; then
+ ebegin "Checking quotas (may take a while)"
+ quotacheck ${QUOTACHECK_OPTS}
+ eend $?
+ fi
+
+ ebegin "Starting quota"
+ quotaon ${QUOTAON_OPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping quota"
+ quotaoff ${QUOTAOFF_OPTS}
+ eend $?
+}
+
+check() {
+ ebegin "Checking quota"
+ quotaoff ${QUOTAOFF_OPTS} && \
+ quotacheck ${QUOTACHECK_OPTS} && \
+ quotaon ${QUOTAON_OPTS}
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.gssd.initd b/pcr/openrc-net/rpc.gssd.initd
new file mode 100644
index 000000000..f1b8f8774
--- /dev/null
+++ b/pcr/openrc-net/rpc.gssd.initd
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.gssd.initd,v 1.11 2008/10/26 09:02:47 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+ use ypbind net
+ need portmap rpc.pipefs
+ after quota
+}
+
+start() {
+ ebegin "Starting gssd"
+ start-stop-daemon --start --exec /usr/sbin/rpc.gssd -- ${OPTS_RPC_GSSD}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping gssd"
+ start-stop-daemon --stop --exec /usr/sbin/rpc.gssd
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.idmapd.initd b/pcr/openrc-net/rpc.idmapd.initd
new file mode 100644
index 000000000..52838b5da
--- /dev/null
+++ b/pcr/openrc-net/rpc.idmapd.initd
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.idmapd.initd,v 1.8 2009/03/14 18:43:18 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+rpc_bin=/usr/sbin/rpc.idmapd
+
+depend() {
+ use ypbind net
+ need portmap rpc.pipefs
+ after quota
+}
+
+start() {
+ ebegin "Starting idmapd"
+ ${rpc_bin} ${OPTS_RPC_IDMAPD}
+ eend $? "make sure DNOTIFY support is enabled ..."
+}
+
+stop() {
+ ebegin "Stopping idmapd"
+ start-stop-daemon --stop --exec ${rpc_bin}
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.pipefs.initd b/pcr/openrc-net/rpc.pipefs.initd
new file mode 100644
index 000000000..ebae3b915
--- /dev/null
+++ b/pcr/openrc-net/rpc.pipefs.initd
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.pipefs.initd,v 1.3 2014/06/20 04:33:57 vapier Exp $
+
+MNT="/var/lib/nfs/rpc_pipefs"
+
+mount_pipefs() {
+ local fstype=rpc_pipefs
+
+ # if things are already mounted, nothing to do
+ mountinfo -q ${MNT} && return 0
+
+ # if rpc_pipefs is not available, try to load sunrpc for it #219566
+ grep -qs ${fstype} /proc/filesystems || modprobe -q sunrpc
+ # if still not available, the `mount` will issue an error for the user
+
+ # now just do it for kicks
+ mkdir -p ${MNT}
+ mount -t ${fstype} ${fstype} ${MNT}
+}
+
+start() {
+ ebegin "Setting up RPC pipefs"
+ mount_pipefs
+ eend $? "make sure you have NFS/SUNRPC enabled in your kernel"
+}
+
+stop() {
+ ebegin "Unmounting RPC pipefs"
+ umount ${MNT}
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.rquotad.initd b/pcr/openrc-net/rpc.rquotad.initd
new file mode 100644
index 000000000..f657fc469
--- /dev/null
+++ b/pcr/openrc-net/rpc.rquotad.initd
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/rpc.rquotad.initd,v 1.1 2007/03/25 12:09:39 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && source /etc/conf.d/nfs
+
+rpc_bin=/usr/sbin/rpc.rquotad
+
+depend() {
+ use ypbind net
+ need portmap
+ after quota
+}
+
+start() {
+ ebegin "Starting rpc.rquotad"
+ ${rpc_bin} ${OPTS_RPC_RQUOTAD}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping rpc.rquotad"
+ start-stop-daemon --stop --quiet --exec ${rpc_bin}
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.statd.initd b/pcr/openrc-net/rpc.statd.initd
new file mode 100644
index 000000000..c82041a4d
--- /dev/null
+++ b/pcr/openrc-net/rpc.statd.initd
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.statd.initd,v 1.9 2015/02/02 13:47:41 radhermit Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+rpc_bin=/sbin/rpc.statd
+rpc_pid=/var/run/rpc.statd.pid
+
+depend() {
+ use ypbind net
+ need portmap
+ after quota
+}
+
+start() {
+ # Don't start rpc.statd if already started by someone else ...
+ # Don't try and kill it if it's already dead ...
+ if killall -q -0 ${rpc_bin} ; then
+ return 0
+ fi
+
+ ebegin "Starting NFS statd"
+ start-stop-daemon --start --exec ${rpc_bin} -- --no-notify ${OPTS_RPC_STATD}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping NFS statd"
+ start-stop-daemon --stop --exec ${rpc_bin} --pidfile /var/run/rpc.statd.pid
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.svcgssd.initd b/pcr/openrc-net/rpc.svcgssd.initd
new file mode 100644
index 000000000..74383e24d
--- /dev/null
+++ b/pcr/openrc-net/rpc.svcgssd.initd
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.svcgssd.initd,v 1.5 2008/10/26 09:02:47 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+ use ypbind net
+ need portmap rpc.pipefs
+ after quota
+}
+
+start() {
+ ebegin "Starting svcgssd"
+ start-stop-daemon --start --exec /usr/sbin/rpc.svcgssd -- ${OPTS_RPC_SVCGSSD}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping svcgssd"
+ start-stop-daemon --stop --exec /usr/sbin/rpc.svcgssd
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.yppasswdd-r1 b/pcr/openrc-net/rpc.yppasswdd-r1
new file mode 100644
index 000000000..a14762516
--- /dev/null
+++ b/pcr/openrc-net/rpc.yppasswdd-r1
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/rpc.yppasswdd-r1,v 1.4 2004/07/24 06:26:28 eradicator Exp $
+
+depend() {
+ need net portmap ypserv
+}
+
+start() {
+ ebegin "Starting rpc.yppasswdd"
+ YOPTS=""
+ if [ -n "${YPPASSWDD_OPTS}" ]; then YOPTS="-- ${YPPASSWDD_OPTS}"; fi
+ start-stop-daemon --start --quiet --exec /usr/sbin/rpc.yppasswdd ${YOPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping rpc.yppasswdd"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/rpc.yppasswdd
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.yppasswdd.confd b/pcr/openrc-net/rpc.yppasswdd.confd
new file mode 100644
index 000000000..0d6673630
--- /dev/null
+++ b/pcr/openrc-net/rpc.yppasswdd.confd
@@ -0,0 +1,7 @@
+# -e chsh allows changing shell through ypchsh,
+# -e chfn allows changing GECOS ("finger") information through ypchfn,
+# -D <dir> allows specification of directory with yp/NIS sources
+# if other than /etc.
+#YPPASSWDD_OPTS="-e chsh -e chfn -D /var/yp/source"
+
+
diff --git a/pcr/openrc-net/rpc.ypxfrd-2.23 b/pcr/openrc-net/rpc.ypxfrd-2.23
new file mode 100644
index 000000000..b1526aa69
--- /dev/null
+++ b/pcr/openrc-net/rpc.ypxfrd-2.23
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/rpc.ypxfrd-2.23,v 1.1 2011/04/21 14:18:40 jer Exp $
+
+depend() {
+ need net portmap ypserv
+}
+
+start() {
+ ebegin "Starting rpc.ypxfrd"
+ YOPTS=""
+ if [ -n "${YPXFRD_OPTS}" ]; then YOPTS="-- ${YPXFRD_OPTS}"; fi
+ start-stop-daemon --start --quiet --pidfile /var/run/ypxfrd.pid --exec /usr/sbin/rpc.ypxfrd ${YOPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping rpc.ypxfrd"
+ start-stop-daemon --stop --quiet --pidfile /var/run/ypxfrd.pid --exec /usr/sbin/rpc.ypxfrd
+ eend $?
+}
diff --git a/pcr/openrc-net/rpc.ypxfrd.confd b/pcr/openrc-net/rpc.ypxfrd.confd
new file mode 100644
index 000000000..73cfc47e7
--- /dev/null
+++ b/pcr/openrc-net/rpc.ypxfrd.confd
@@ -0,0 +1,3 @@
+# Command line options to pass to rpc.ypxfrd
+# eg: you can pass --port <number> to use a non-standard port
+YPXFRD_OPTS=""
diff --git a/pcr/openrc-net/rpcbind.initd b/pcr/openrc-net/rpcbind.initd
new file mode 100644
index 000000000..995ca71d0
--- /dev/null
+++ b/pcr/openrc-net/rpcbind.initd
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/rpcbind/files/rpcbind.initd,v 1.1 2007/12/29 09:13:55 vapier Exp $
+
+depend() {
+ use net
+ before inetd xinetd
+ provide portmap
+}
+
+start() {
+ ebegin "Starting rpcbind"
+ start-stop-daemon --start --quiet --exec /sbin/rpcbind -- ${RPCBIND_OPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping rpcbind"
+ start-stop-daemon --stop --quiet --exec /sbin/rpcbind
+ eend $?
+}
diff --git a/pcr/openrc-net/rsyncd.conf.d b/pcr/openrc-net/rsyncd.conf.d
new file mode 100644
index 000000000..c3d897ed2
--- /dev/null
+++ b/pcr/openrc-net/rsyncd.conf.d
@@ -0,0 +1,5 @@
+# /etc/conf.d/rsyncd: config file for /etc/init.d/rsyncd
+
+# see man pages for rsync or run `rsync --help`
+# for valid cmdline options
+#RSYNC_OPTS=""
diff --git a/pcr/openrc-net/rsyncd.init.d-r1 b/pcr/openrc-net/rsyncd.init.d-r1
new file mode 100644
index 000000000..d2e608e49
--- /dev/null
+++ b/pcr/openrc-net/rsyncd.init.d-r1
@@ -0,0 +1,12 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/rsync/files/rsyncd.init.d-r1,v 1.1 2012/03/22 22:01:21 idl0r Exp $
+
+command="/usr/bin/rsync"
+command_args="--daemon ${RSYNC_OPTS}"
+pidfile="/var/run/${SVCNAME}.pid"
+
+depend() {
+ use net
+}
diff --git a/pcr/openrc-net/samba4.confd b/pcr/openrc-net/samba4.confd
new file mode 100644
index 000000000..58b2c7827
--- /dev/null
+++ b/pcr/openrc-net/samba4.confd
@@ -0,0 +1,38 @@
+# Add "winbind" to the daemon_list if you also want winbind to start.
+# Replace "smbd nmbd" by "samba4" if you want the active directory domain controller part or the ntvfs
+# file server part or the rpc proxy to start.
+# Note that samba4 controls 'smbd' by itself, thus it can't be started manually. You can, however,
+# tweak the behaviour of a samba4-controlled smbd by modifying your '/etc/samba/smb.conf' file
+# accordingly.
+daemon_list="smbd nmbd"
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+my_service_name="samba"
+my_service_PRE="unset TMP TMPDIR"
+my_service_POST=""
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+smbd_start_options="-D"
+smbd_start="start-stop-daemon --start --exec /usr/sbin/smbd -- ${smbd_start_options}"
+smbd_stop="start-stop-daemon --stop --exec /usr/sbin/smbd"
+smbd_reload="killall -HUP smbd"
+
+nmbd_start_options="-D"
+nmbd_start="start-stop-daemon --start --exec /usr/sbin/nmbd -- ${nmbd_start_options}"
+nmbd_stop="start-stop-daemon --stop --exec /usr/sbin/nmbd"
+nmbd_reload="killall -HUP nmbd"
+
+samba4_start_options=""
+samba4_start="start-stop-daemon --start --exec /usr/sbin/samba -- ${samba4_start_options}"
+samba4_stop="start-stop-daemon --stop --exec /usr/sbin/samba"
+samba4_reload="killall -HUP samba"
+
+winbind_start_options=""
+winbind_start="start-stop-daemon --start --exec /usr/sbin/winbindd -- ${winbind_start_options}"
+winbind_stop="start-stop-daemon --stop --exec /usr/sbin/winbindd"
+winbind_reload="killall -HUP winbindd"
+
diff --git a/pcr/openrc-net/samba4.initd-r1 b/pcr/openrc-net/samba4.initd-r1
new file mode 100644
index 000000000..6401dfbe0
--- /dev/null
+++ b/pcr/openrc-net/samba4.initd-r1
@@ -0,0 +1,56 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/4.1/samba4.initd-r1,v 1.3 2014/03/13 15:35:07 polynomial-c Exp $
+
+extra_started_commands="reload"
+piddir="/var/run/samba"
+
+depend() {
+ after slapd
+ need net
+ use cupsd
+}
+
+DAEMONNAME="${SVCNAME##samba.}"
+[ "${DAEMONNAME}" != "samba" ] && daemon_list=${DAEMONNAME}
+
+signal_do() {
+ local signal="$1"
+ [ -z "${signal}" ] && return 0
+
+ local result=0 last_result=0 daemon= cmd_exec=
+ for daemon in ${daemon_list} ; do
+ eval cmd_exec=\$${daemon}_${signal}
+ if [ -n "${cmd_exec}" ]; then
+ ebegin "${my_service_name} -> ${signal}: ${daemon}"
+ #echo ${cmd} '->' ${!cmd}
+ ${cmd_exec} > /dev/null
+ last_result=$?
+ eend ${last_result}
+ fi
+ result=$(( ${result} + ${last_result} ))
+ done
+ return ${result}
+}
+
+start() {
+ ${my_service_PRE}
+ [ -d "${piddir}" ] || mkdir -p "${piddir}"
+ signal_do start && return 0
+
+ eerror "Error: starting services (see system logs)"
+ signal_do stop
+ return 1
+}
+stop() {
+ ${my_service_PRE}
+ if signal_do stop ; then
+ ${my_service_POST}
+ return 0
+ fi
+}
+reload() {
+ ${my_service_PRE}
+ signal_do reload
+}
diff --git a/pcr/openrc-net/slapd-confd-2.4.28-r1 b/pcr/openrc-net/slapd-confd-2.4.28-r1
new file mode 100644
index 000000000..ef19899a3
--- /dev/null
+++ b/pcr/openrc-net/slapd-confd-2.4.28-r1
@@ -0,0 +1,26 @@
+# conf.d file for openldap
+#
+# To enable both the standard unciphered server and the ssl encrypted
+# one uncomment this line or set any other server starting options
+# you may desire.
+
+# If you have multiple slapd instances per #376699, this will provide a default config
+INSTANCE="openldap${SVCNAME#slapd}"
+
+# If you use the classical configuration file:
+OPTS_CONF="-f /etc/${INSTANCE}/slapd.conf"
+# Uncomment this instead to use the new slapd.d configuration directory for openldap 2.3
+#OPTS_CONF="-F /etc/${INSTANCE}/slapd.d"
+# (the OPTS_CONF variable is also passed to slaptest during startup)
+
+OPTS="${OPTS_CONF} -h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
+# Optional connectionless LDAP:
+#OPTS="${OPTS_CONF} -h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock cldap://'"
+
+# If you change the above listen statement to bind on a specific IP for
+# listening, you should ensure that interface is up here (change eth0 as
+# needed).
+#rc_need="net.eth0"
+
+# Specify the kerberos keytab file
+#KRB5_KTNAME=/etc/openldap/krb5-ldap.keytab
diff --git a/pcr/openrc-net/slapd-initd-2.4.28-r1 b/pcr/openrc-net/slapd-initd-2.4.28-r1
new file mode 100644
index 000000000..48946d6ef
--- /dev/null
+++ b/pcr/openrc-net/slapd-initd-2.4.28-r1
@@ -0,0 +1,36 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/files/slapd-initd-2.4.28-r1,v 1.4 2012/05/27 07:22:43 robbat2 Exp $
+
+extra_commands="checkconfig"
+
+[ -z "$INSTANCE" ] && INSTANCE="openldap${SVCNAME#slapd}"
+
+depend() {
+ need net
+ before dbus hald avahi-daemon
+ provide ldap
+}
+
+start() {
+ checkpath -q -d /var/run/openldap/ -o ldap:ldap
+ if ! checkconfig -Q ; then
+ eerror "There is a problem with your slapd.conf!"
+ return 1
+ fi
+ ebegin "Starting ldap-server"
+ [ -n "$KRB5_KTNAME" ] && export KRB5_KTNAME
+ eval start-stop-daemon --start --pidfile /var/run/openldap/${SVCNAME}.pid --exec /usr/lib/openldap/slapd -- -u ldap -g ldap "${OPTS}"
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping ldap-server"
+ start-stop-daemon --stop --signal 2 --quiet --pidfile /var/run/openldap/${SVCNAME}.pid
+ eend $?
+}
+
+checkconfig() {
+ /usr/sbin/slaptest -u "$@" ${OPTS_CONF}
+}
diff --git a/pcr/openrc-net/slpd-init b/pcr/openrc-net/slpd-init
new file mode 100644
index 000000000..bbc0eac1a
--- /dev/null
+++ b/pcr/openrc-net/slpd-init
@@ -0,0 +1,89 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-libs/openslp/files/slpd-init,v 1.5 2012/02/09 08:19:35 robbat2 Exp $
+
+depend() {
+ need net
+}
+
+#
+# Does nothing if a route exists that supports multicast traffic.
+# If no routes supporting multicast traffic exists, the function
+# tries to add one. A 0 is returned on success and a 1 on failure.
+# One parameter must be passed in. This variable determins verbosity.
+# If parameter is non-zero debugging will appear.
+#
+multicast_route_set() {
+ PING_OPTIONS_1='-c1 -w1'
+ PING_OPTIONS_2='-c1 -i1'
+ MULTICAST_ADDRESS='239.255.255.253'
+ TMP_FILE=/tmp/route.check
+ PING_ERROR_NO_ROUTE='unreachable'
+
+ MSG_FAILED_TO_FIND='Failed to Detect Multicast Route'
+ MSG_SUCCESS_ON_FIND='Multicast Route Enabled'
+ MSG_ADDING_ROUTE='Attempting to Add Multicast Route ...'
+ MSG_FAILED_TO_ADD=' FAILED - Route NOT Added.'
+ MSG_SUCCES_ON_ADD=' SUCCESS - Route Added.'
+
+ CMD_GET_INTERFACE="netstat -i | awk 'BEGIN{}(NR>2)&&(!/^lo*/){print \$1;exit}'"
+ CMD_ADD_ROUTE="route add -net 224.0.0.0 netmask 240.0.0.0"
+
+ ping $PING_OPTIONS_1 $MULTICAST_ADDRESS 2> $TMP_FILE 1> /dev/null
+ if [ $? = 2 ]; then
+ ping $PING_OPTIONS_2 $MULTICAST_ADDRESS 2> $TMP_FILE 1> /dev/null
+ fi
+
+ grep $PING_ERROR_NO_ROUTE $TMP_FILE > /dev/null 2>&1
+ err_unreachable_found=$?
+
+ #If errors, add route. Otherwise, do nothing
+ if [ -s $TMP_FILE ] && [ $err_unreachable_found = 0 ]; then
+
+ if [ $1 != 0 ]; then
+ echo $MSG_FAILED_TO_FIND
+ echo $MSG_ADDING_ROUTE
+ fi
+
+ $CMD_ADD_ROUTE `eval $CMD_GET_INTERFACE` > /dev/null 2>&1
+ retval=$?
+ if [ $1 != 0 ]; then
+
+ if [ $retval = 0 ]; then
+ echo $MSG_SUCCES_ON_ADD
+ else
+ echo $MSG_FAILED_TO_ADD
+ fi
+ fi
+ else
+ if [ $1 != 0 ]; then
+ echo -n $MSG_SUCCESS_ON_FIND
+ fi
+ retval=0
+ fi
+
+ rm -f $TMP_FILE # Clean up
+ return $retval
+}
+
+checkconfig() {
+ multicast_route_set 0
+ if [ $? -ne 0 ]; then
+ eerror "No route available for multicast traffic!"
+ return 1
+ fi
+}
+
+start() {
+ checkconfig || return 1
+ ebegin "Starting slpd"
+ start-stop-daemon --start --quiet --exec /usr/sbin/slpd --pidfile /var/run/slpd.pid
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping slpd"
+ start-stop-daemon --stop --quiet --pidfile /var/run/slpd.pid
+ eend $?
+}
diff --git a/pcr/openrc-net/squid.confd-r1 b/pcr/openrc-net/squid.confd-r1
new file mode 100644
index 000000000..f17bfe06f
--- /dev/null
+++ b/pcr/openrc-net/squid.confd-r1
@@ -0,0 +1,13 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/squid/files/squid.confd-r1,v 1.1 2013/01/11 15:25:49 eras Exp $
+
+# Config file for /etc/init.d/squid
+
+SQUID_OPTS="-YC"
+
+# Kerberos keytab file to use. This is required if you enable kerberos authentication.
+SQUID_KEYTAB=""
+
+# Use max_filedescriptors setting in squid.conf to determine the maximum number
+# of filedescriptors squid can open.
diff --git a/pcr/openrc-net/squid.initd-r4 b/pcr/openrc-net/squid.initd-r4
new file mode 100644
index 000000000..0b5741955
--- /dev/null
+++ b/pcr/openrc-net/squid.initd-r4
@@ -0,0 +1,118 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/squid/files/squid.initd-r4,v 1.1 2014/01/18 22:16:27 eras Exp $
+
+extra_started_commands="reload rotate"
+
+depend() {
+ use dns net
+}
+
+checkconfig() {
+ if [ ! -f /etc/squid/${SVCNAME}.conf ]; then
+ eerror "You need to create /etc/squid/${SVCNAME}.conf first."
+ eerror "An example can be found in /etc/squid/squid.conf.default"
+ return 1
+ fi
+
+ local PIDFILE=$(awk '/^[ \t]*pid_filename[ \t]+/ { print $2 }' < /etc/squid/${SVCNAME}.conf)
+ [ -z ${PIDFILE} ] && PIDFILE=/run/squid.pid
+ if [ /run/${SVCNAME}.pid != ${PIDFILE} ]; then
+ eerror "/etc/squid/${SVCNAME}.conf must set pid_filename to"
+ eerror " /run/${SVCNAME}.pid"
+ eerror "CAUTION: http_port, cache_dir and *_log parameters must be different than"
+ eerror " in any other instance of squid."
+ return 1
+ fi
+
+ # Maximum file descriptors squid can open is determined by:
+ # a basic default of N=1024
+ # ... altered by ./configure --with-filedescriptors=N
+ # ... overridden on production by squid.conf max_filedescriptors (if,
+ # and only if, setrlimit() RLIMIT_NOFILE is able to be built+used).
+ # Since we do not configure hard coded # of filedescriptors anymore,
+ # there is no need for ulimit calls in the init script.
+ # Use max_filedescriptors in squid.conf instead.
+
+ local CACHE_SWAP=$(awk '/^[ \t]*cache_dir[ \t]+/ { if ( $2 == "rock" ) printf "%s/rock ", $3; else if ( $2 == "coss" ) printf "%s/stripe ", $3; else printf "%s/00 ", $3; }' < /etc/squid/${SVCNAME}.conf)
+ [ -z "$CACHE_SWAP" ] && CACHE_SWAP="/var/cache/squid/00"
+
+ local x
+ for x in $CACHE_SWAP ; do
+ if [ ! -e $x ] ; then
+ ebegin "Initializing cache directory ${x%/*}"
+ local ORIG_UMASK=$(umask)
+ umask 027
+
+ if ! (mkdir -p ${x%/*} && chown squid ${x%/*}) ; then
+ eend 1
+ return 1
+ fi
+
+ local INIT_CACHE_RESPONSE="$(/usr/sbin/squid -z -N -f /etc/squid/${SVCNAME}.conf 2>&1)"
+ if [ $? != 0 ] || echo "$INIT_CACHE_RESPONSE" | grep -q "erminated abnormally" ; then
+ umask $ORIG_UMASK
+ eend 1
+ echo "$INIT_CACHE_RESPONSE"
+ return 1
+ fi
+
+ umask $ORIG_UMASK
+ eend 0
+ break
+ fi
+ done
+
+ return 0
+}
+
+start() {
+ checkconfig || return 1
+ checkpath -d -q -m 0750 -o squid:squid /run/${SVCNAME}
+
+ ebegin "Starting ${SVCNAME}"
+ KRB5_KTNAME="${SQUID_KEYTAB}" /usr/sbin/squid ${SQUID_OPTS} -f /etc/squid/${SVCNAME}.conf
+ eend $? && sleep 1
+}
+
+stop() {
+ ebegin "Stopping ${SVCNAME}"
+ if /usr/sbin/squid -k shutdown -f /etc/squid/${SVCNAME}.conf ; then
+ # Now we have to wait until squid has _really_ stopped.
+ sleep 1
+ if [ -f /run/${SVCNAME}.pid ] ; then
+ einfon "Waiting for squid to shutdown ."
+ cnt=0
+ while [ -f /run/${SVCNAME}.pid ] ; do
+ cnt=$(expr $cnt + 1)
+ if [ $cnt -gt 60 ] ; then
+ # Waited 120 seconds now. Fail.
+ echo
+ eend 1 "Failed."
+ break
+ fi
+ sleep 2
+ echo -n "."
+ done
+ echo
+ fi
+ else
+ eerror "Squid shutdown failed, probably service is already down."
+ fi
+ eend 0
+}
+
+reload() {
+ checkconfig || return 1
+ ebegin "Reloading ${SVCNAME}"
+ /usr/sbin/squid -k reconfigure -f /etc/squid/${SVCNAME}.conf
+ eend $?
+}
+
+rotate() {
+ service_started ${SVCNAME} || return 1
+ ebegin "Rotating ${SVCNAME} logs"
+ /usr/sbin/squid -k rotate -f /etc/squid/${SVCNAME}.conf
+ eend $?
+}
diff --git a/pcr/openrc-net/sshd.confd b/pcr/openrc-net/sshd.confd
new file mode 100644
index 000000000..28952b4a2
--- /dev/null
+++ b/pcr/openrc-net/sshd.confd
@@ -0,0 +1,21 @@
+# /etc/conf.d/sshd: config file for /etc/init.d/sshd
+
+# Where is your sshd_config file stored?
+
+SSHD_CONFDIR="/etc/ssh"
+
+
+# Any random options you want to pass to sshd.
+# See the sshd(8) manpage for more info.
+
+SSHD_OPTS=""
+
+
+# Pid file to use (needs to be absolute path).
+
+#SSHD_PIDFILE="/var/run/sshd.pid"
+
+
+# Path to the sshd binary (needs to be absolute path).
+
+#SSHD_BINARY="/usr/sbin/sshd"
diff --git a/pcr/openrc-net/sshd.rc6.4 b/pcr/openrc-net/sshd.rc6.4
new file mode 100644
index 000000000..1b872bc87
--- /dev/null
+++ b/pcr/openrc-net/sshd.rc6.4
@@ -0,0 +1,87 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/files/sshd.rc6.4,v 1.3 2013/04/24 03:13:03 vapier Exp $
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+SSHD_CONFDIR=${SSHD_CONFDIR:-/etc/ssh}
+SSHD_CONFIG=${SSHD_CONFIG:-${SSHD_CONFDIR}/sshd_config}
+SSHD_PIDFILE=${SSHD_PIDFILE:-/var/run/${SVCNAME}.pid}
+SSHD_BINARY=${SSHD_BINARY:-/usr/sbin/sshd}
+
+depend() {
+ use logger dns
+ if [ "${rc_need+set}" = "set" ]; then
+ : # Do nothing, the user has explicitly set rc_need
+ else
+ warn_addr=''
+ for x in $(awk '/^ListenAddress/{ print $2 }' "$SSHD_CONFIG" 2>/dev/null) ; do
+ case "$x" in
+ 0.0.0.0|0.0.0.0:*) ;;
+ ::|\[::\]*) ;;
+ *) warn_addr="${warn_addr} $x" ;;
+ esac
+ done
+ unset x
+ if [ "${warn_addr:+set}" = "set" ]; then
+ need net
+ ewarn "You are binding an interface in ListenAddress statement in your sshd_config!"
+ ewarn "You must add rc_need=\"net.FOO\" to your /etc/conf.d/sshd"
+ ewarn "where FOO is the interface(s) providing the following address(es):"
+ ewarn "${warn_addr}"
+ fi
+ unset warn_addr
+ fi
+}
+
+checkconfig() {
+ if [ ! -d /var/empty ] ; then
+ mkdir -p /var/empty || return 1
+ fi
+
+ if [ ! -e "${SSHD_CONFDIR}"/sshd_config ] ; then
+ eerror "You need an ${SSHD_CONFDIR}/sshd_config file to run sshd"
+ eerror "There is a sample file in /usr/share/doc/openssh"
+ return 1
+ fi
+
+ ssh-keygen -A || return 1
+
+ [ "${SSHD_PIDFILE}" != "/var/run/sshd.pid" ] \
+ && SSHD_OPTS="${SSHD_OPTS} -o PidFile=${SSHD_PIDFILE}"
+ [ "${SSHD_CONFDIR}" != "/etc/ssh" ] \
+ && SSHD_OPTS="${SSHD_OPTS} -f ${SSHD_CONFDIR}/sshd_config"
+
+ "${SSHD_BINARY}" -t ${SSHD_OPTS} || return 1
+}
+
+start() {
+ checkconfig || return 1
+
+ ebegin "Starting ${SVCNAME}"
+ start-stop-daemon --start --exec "${SSHD_BINARY}" \
+ --pidfile "${SSHD_PIDFILE}" \
+ -- ${SSHD_OPTS}
+ eend $?
+}
+
+stop() {
+ if [ "${RC_CMD}" = "restart" ] ; then
+ checkconfig || return 1
+ fi
+
+ ebegin "Stopping ${SVCNAME}"
+ start-stop-daemon --stop --exec "${SSHD_BINARY}" \
+ --pidfile "${SSHD_PIDFILE}" --quiet
+ eend $?
+}
+
+reload() {
+ checkconfig || return 1
+ ebegin "Reloading ${SVCNAME}"
+ start-stop-daemon --signal HUP \
+ --exec "${SSHD_BINARY}" --pidfile "${SSHD_PIDFILE}"
+ eend $?
+}
diff --git a/pcr/openrc-net/tor.confd b/pcr/openrc-net/tor.confd
new file mode 100644
index 000000000..4195bf323
--- /dev/null
+++ b/pcr/openrc-net/tor.confd
@@ -0,0 +1,3 @@
+#
+# Set the file limit
+rc_ulimit="-n 30000"
diff --git a/pcr/openrc-net/tor.initd-r6 b/pcr/openrc-net/tor.initd-r6
new file mode 100644
index 000000000..c31eac12f
--- /dev/null
+++ b/pcr/openrc-net/tor.initd-r6
@@ -0,0 +1,60 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/tor/files/Attic/tor.initd-r6,v 1.7 2015/03/20 12:46:13 blueness dead $
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+PIDFILE=/var/run/tor/tor.pid
+CONFFILE=/etc/tor/torrc
+
+depend() {
+ need net
+}
+
+checkconfig() {
+ # first check that it exists
+ if [ ! -f ${CONFFILE} ] ; then
+ eerror "You need to setup ${CONFFILE} first"
+ eerror "Example is in ${CONFFILE}.sample"
+ return 1
+ fi
+
+ # now verify whether the configuration is valid
+ /usr/bin/tor --verify-config -f ${CONFFILE} > /dev/null 2>&1
+ if [ $? -eq 0 ] ; then
+ einfo "Tor configuration (${CONFFILE}) is valid."
+ return 0
+ else
+ eerror "Tor configuration (${CONFFILE}) not valid."
+ /usr/bin/tor --verify-config -f ${CONFFILE}
+ return 1
+ fi
+}
+
+start() {
+ checkconfig || return 1
+ checkpath -d -m 0755 -o tor:tor /var/run/tor
+ ebegin "Starting Tor"
+ HOME=/var/lib/tor
+ start-stop-daemon --start --pidfile "${PIDFILE}" --quiet --exec /usr/bin/tor -- -f "${CONFFILE}" --runasdaemon 1 --PidFile "${PIDFILE}" > /dev/null 2>&1
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping Tor"
+ start-stop-daemon --stop --pidfile "${PIDFILE}" --exec /usr/bin/tor -- --PidFile "${PIDFILE}"
+ eend $?
+}
+
+reload() {
+ if [ ! -f ${PIDFILE} ]; then
+ eerror "${SVCNAME} isn't running"
+ return 1
+ fi
+ checkconfig || return 1
+ ebegin "Reloading Tor configuration"
+ start-stop-daemon --signal HUP --pidfile ${PIDFILE}
+ eend $?
+}
diff --git a/pcr/openrc-net/transmission-daemon.confd.4 b/pcr/openrc-net/transmission-daemon.confd.4
new file mode 100644
index 000000000..8f3b1317a
--- /dev/null
+++ b/pcr/openrc-net/transmission-daemon.confd.4
@@ -0,0 +1,14 @@
+# This is the transmission-daemon configuration file. For other options and
+# better explanation, take a look at transmission-daemon manual page Note: it's
+# better to configure some settings (like username/password) in
+# /var/lib/transmission/config/settings.json to avoid other users see it with `ps`
+
+TRANSMISSION_OPTIONS="--encryption-preferred"
+
+# Run daemon as another user (username or username:groupname)
+# If you change this setting, chown -R /var/lib/transmission/config <and download directory, check web settings>
+#runas_user=transmission
+
+# Location of logfile (should be writeable for runas_user user)
+# Set logfile=syslog to use syslog for logging
+#logfile=/var/log/transmission/transmission.log
diff --git a/pcr/openrc-net/transmission-daemon.initd.9 b/pcr/openrc-net/transmission-daemon.initd.9
new file mode 100644
index 000000000..3c4914c58
--- /dev/null
+++ b/pcr/openrc-net/transmission-daemon.initd.9
@@ -0,0 +1,73 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-p2p/transmission/files/transmission-daemon.initd.9,v 1.1 2013/09/07 12:10:01 ssuominen Exp $
+
+extra_started_commands="reload"
+description="Transmission is a fast, easy and free bittorrent client"
+description_start="Start transmission-daemon server and web interface"
+description_stop="Stop transmission-daemon server and web interface"
+description_reload="Reload transmission-daemon settings"
+
+rundir=${rundir:-/var/run/transmission}
+pidfile=${pidfile:-${rundir}/transmission.pid}
+config_dir=${config_dir:-/var/lib/transmission/config}
+download_dir=${download_dir:-/var/lib/transmission/downloads}
+logfile=${logfile:-/var/log/transmission/transmission.log}
+runas_user=${runas_user:-transmission:transmission}
+
+SSD_OPTIONS=""
+
+depend() {
+ need net
+}
+
+check_config() {
+ if [ ! -d "${rundir}" ]; then
+ mkdir "${rundir}"
+ if [ -n "${runas_user}" ]; then
+ chown -R ${runas_user} "${rundir}"
+ fi
+ fi
+
+ # In case no config directory option passed use default
+ if ! $(echo ${TRANSMISSION_OPTIONS} | grep -q -e '\B-g' -e '\B--config-dir'); then
+ TRANSMISSION_OPTIONS="${TRANSMISSION_OPTIONS} --config-dir ${config_dir}"
+ # put download dir location on first run (and take it from config later)
+ if [ ! -f ${config_dir}/settings.json ]; then
+ TRANSMISSION_OPTIONS="${TRANSMISSION_OPTIONS} --download-dir ${download_dir}"
+ fi
+ fi
+
+ if [ -n "${runas_user}" ]; then
+ if [ -f /etc/init.d/sysfs ]; then
+ SSD_OPTIONS="${SSD_OPTIONS} --user ${runas_user}"
+ else
+ SSD_OPTIONS="${SSD_OPTIONS} --chuid ${runas_user}"
+ fi
+ fi
+}
+
+start() {
+ check_config
+
+ ebegin "Starting transmission daemon"
+ start-stop-daemon --start --quiet --pidfile ${pidfile} ${SSD_OPTIONS} \
+ --exec /usr/bin/transmission-daemon -- --pid-file ${pidfile} \
+ $(test ${logfile} != "syslog" && echo --logfile ${logfile}) \
+ ${TRANSMISSION_OPTIONS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping transmission daemon"
+ start-stop-daemon --stop --quiet --retry TERM/45/QUIT/15 --pidfile ${pidfile}
+ eend $?
+}
+
+reload() {
+ ebegin "Reloading transmission configuration"
+ start-stop-daemon --signal HUP --pidfile ${pidfile}
+ eend $?
+}
+
diff --git a/pcr/openrc-net/ufw-2.initd b/pcr/openrc-net/ufw-2.initd
new file mode 100644
index 000000000..1ffd1c596
--- /dev/null
+++ b/pcr/openrc-net/ufw-2.initd
@@ -0,0 +1,137 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/ufw/files/ufw-2.initd,v 1.2 2012/06/13 21:14:52 thev00d00 Exp $
+
+depend() {
+ before net
+ provide firewall
+}
+
+start() {
+ ebegin "Starting ufw"
+ _source_file || { eend $?; return $?; }
+
+ local enabled_in_cfg ret
+ _check_if_enabled_in_cfg
+ enabled_in_cfg=$?
+
+ # Avoid "Firewall already started, use 'force-reload'" message that
+ # appears if `ufw enable' had been run before start().
+ if _status_quiet; then
+ eend 0
+ return
+ fi
+
+ # The ufw_start function does the same: if ufw is disabled using `ufw disable',
+ # ufw_start would not start ufw and return 0, so let's handle this case.
+ case $enabled_in_cfg in
+ 0)
+ ufw_start
+ ret=$?
+ eend $ret "Failed to start ufw."
+ ;;
+ 1)
+ # see /etc/conf.d/<name>
+ if [ "${ufw_nonfatal_if_disabled:-no}" != "yes" ]; then
+ ret=1
+ eend $ret "Not starting firewall (not enabled), use \"ufw enable\" first."
+ else
+ ret=0
+ eend 0
+ fi
+ ;;
+ 2)
+ ret=1
+ eend $ret "Failed to start ufw."
+ ;;
+ esac
+
+ return $ret
+}
+
+stop() {
+ ebegin "Stopping ufw"
+ _source_file || { eend $?; return $?; }
+ local enabled_in_cfg ret
+ _check_if_enabled_in_cfg
+ enabled_in_cfg=$?
+
+ # Same as above (unless --force is passed to ufw_stop).
+ case $enabled_in_cfg in
+ 0)
+ ufw_stop
+ ret=$?
+ ;;
+ 1)
+ einfo "INFO: ufw is configured to be disabled"
+ ufw_stop --force
+ ret=$?
+ ;;
+ 2)
+ ret=1
+ ;;
+ esac
+
+ eend $ret "Failed to stop ufw."
+ return $ret
+}
+
+_status_quiet() {
+ # return values: 0 - started, 1 - stopped, 2 - error
+ # Does not execute _source_file.
+ local ret
+ ufw_status > /dev/null
+ ret=$?
+ # Return values for ufw_status come from /usr/share/ufw/ufw-init-functions.
+ case $ret in
+ 0) return 0 ;;
+ 3) return 1 ;;
+ *) return 2 ;;
+ esac
+}
+
+_source_file() {
+ local sourced_f="/usr/share/ufw/ufw-init-functions"
+ if [ ! -f "$sourced_f" ]; then
+ eerror "Cannot find file $sourced_f!"
+ return 1
+ fi
+
+ local _path=$PATH
+ if ! . "$sourced_f"; then
+ # PATH can be broken here, fix it...
+ PATH=$_path
+ eerror "Error sourcing file $sourced_f"
+ return 1
+ fi
+
+ if [ -z "$PATH" ]; then
+ PATH=$_path
+ else
+ PATH="${PATH}:${_path}"
+ fi
+ return 0
+}
+
+_check_if_enabled_in_cfg() {
+ # Check if user has enabled the firewall with "ufw enable".
+ # Return 0 if firewall enabled in configuration file, 1 otherwise, 2 on error.
+
+ local sourced_f="/etc/ufw/ufw.conf"
+ if [ ! -f "$sourced_f" ]; then
+ eerror "Cannot find file $sourced_f!"
+ return 2
+ fi
+
+ if ! . "$sourced_f"; then
+ eerror "Error sourcing file $sourced_f"
+ return 2
+ fi
+
+ if [ "$ENABLED" = "yes" ] || [ "$ENABLED" = "YES" ]; then
+ return 0
+ else
+ return 1
+ fi
+}
diff --git a/pcr/openrc-net/ufw.confd b/pcr/openrc-net/ufw.confd
new file mode 100644
index 000000000..900d3bf67
--- /dev/null
+++ b/pcr/openrc-net/ufw.confd
@@ -0,0 +1,5 @@
+# If equals to "yes", warnings that firewall is disabled
+# (using `ufw disable') will be suppressed and the service
+# will be considered started.
+# Default if unset or another value is "no".
+ufw_nonfatal_if_disabled=no
diff --git a/pcr/openrc-net/vsftpd-checkconfig.sh b/pcr/openrc-net/vsftpd-checkconfig.sh
new file mode 100644
index 000000000..e1d1e5231
--- /dev/null
+++ b/pcr/openrc-net/vsftpd-checkconfig.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+VSFTPD_CONF="${VSFTPD_CONF:-/etc/vsftpd/vsftpd.conf}"
+
+if [ ! -e ${VSFTPD_CONF} ] ; then
+ echo "Please setup ${VSFTPD_CONF} before starting vsftpd" >&2
+ echo "There are sample configurations in /usr/share/doc/vsftpd" >&2
+ exit 1
+fi
+
+if egrep -iq "^ *background *= *yes" "${VSFTPD_CONF}" ; then
+ echo "${VSFTPD_CONF} must not set background=YES" >&2
+ exit 1
+fi
+
+has_ip=false has_ipv6=false ip_error=true
+egrep -iq "^ *listen *= *yes" "${VSFTPD_CONF}" && has_ip=true
+egrep -iq "^ *listen_ipv6 *= *yes" "${VSFTPD_CONF}" && has_ipv6=true
+if ${has_ip} && ! ${has_ipv6} ; then
+ ip_error=false
+elif ! ${has_ip} && ${has_ipv6} ; then
+ ip_error=false
+fi
+if ${ip_error} ; then
+ echo "${VSFTPD_CONF} must contain listen=YES or listen_ipv6=YES" >&2
+ echo "but not both" >&2
+ exit 1
+fi
+
diff --git a/pcr/openrc-net/vsftpd.init b/pcr/openrc-net/vsftpd.init
new file mode 100644
index 000000000..e1c26c7d8
--- /dev/null
+++ b/pcr/openrc-net/vsftpd.init
@@ -0,0 +1,51 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2
+# $Header: /var/cvsroot/gentoo-x86/net-ftp/vsftpd/files/vsftpd.init,v 1.9 2015/01/31 13:07:47 hwoarang Exp $
+
+VSFTPD_NAME=${SVCNAME##*.}
+if [ -n "${VSFTPD_NAME}" -a "${SVCNAME}" != "vsftpd" ]; then
+ VSFTPD_PID="/var/run/vsftpd.${VSFTPD_NAME}.pid"
+ VSFTPD_CONF_DEFAULT="/etc/vsftpd/${VSFTPD_NAME}.conf"
+else
+ VSFTPD_PID="/var/run/vsftpd.pid"
+ VSFTPD_CONF_DEFAULT="/etc/vsftpd/vsftpd.conf"
+fi
+VSFTPD_CONF=${VSFTPD_CONF:-${VSFTPD_CONF_DEFAULT}}
+VSFTPD_EXEC=${VSFTPD_EXEC:-/usr/sbin/vsftpd}
+
+depend() {
+ need net
+ use dns logger
+}
+
+checkconfig() {
+ VSFTPD_CONF="${VSFTPD_CONF}" \
+ /usr/libexec/vsftpd-checkconfig.sh || return 1
+}
+
+start() {
+ checkconfig || return 1
+ ebegin "Starting ${SVCNAME}"
+ start-stop-daemon --start --exec ${VSFTPD_EXEC} \
+ --background --make-pidfile --pidfile "${VSFTPD_PID}" \
+ -- "${VSFTPD_CONF}"
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping ${SVCNAME}"
+ local retval=0
+ if [ -f ${VSFTPD_PID} ]; then
+ start-stop-daemon --stop --pidfile ${VSFTPD_PID} || retval=1
+ pkill --full ${VSFTPD_CONF}
+ else
+ ewarn "Couldn't find ${VSFTPD_PID} trying to stop using the config filename ${VSFTPD_CONF}"
+ pgrep --full ${VSFTPD_CONF} > ${VSFTPD_PID}
+ start-stop-daemon --stop --pidfile ${VSFTPD_PID} || retval=1
+ pkill --full ${VSFTPD_CONF}
+ fi
+ eend ${retval}
+}
+
+# vim: ts=4
diff --git a/pcr/openrc-net/xinetd.confd b/pcr/openrc-net/xinetd.confd
new file mode 100644
index 000000000..ae211f3d8
--- /dev/null
+++ b/pcr/openrc-net/xinetd.confd
@@ -0,0 +1,3 @@
+# /etc/conf.d/xinetd: config file for /etc/init.d/xinetd
+
+XINETD_OPTS="-stayalive -reuse"
diff --git a/pcr/openrc-net/xinetd.rc6 b/pcr/openrc-net/xinetd.rc6
new file mode 100644
index 000000000..2f90775c0
--- /dev/null
+++ b/pcr/openrc-net/xinetd.rc6
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/xinetd/files/xinetd.rc6,v 1.24 2011/10/11 01:26:08 vapier Exp $
+
+extra_started_commands="reload dump check"
+
+depend() {
+ use net
+}
+
+start() {
+ ebegin "Starting xinetd"
+ start-stop-daemon --start --exec /usr/sbin/xinetd -- \
+ -pidfile /var/run/xinetd.pid ${XINETD_OPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping xinetd"
+ start-stop-daemon --stop --quiet --pidfile /var/run/xinetd.pid
+ eend $?
+}
+
+do_sig() {
+ local sig=$1 ; shift
+ ebegin "$*"
+ start-stop-daemon --signal ${sig} --pidfile /var/run/xinetd.pid
+ eend $?
+}
+reload() { do_sig HUP "Reloading configuration" ; }
+dump() { do_sig USR1 "Dumping configuration" ; }
+check() { do_sig IOT "Performing Consistency Check" ; }
diff --git a/pcr/openrc-net/ypbind.confd-r1 b/pcr/openrc-net/ypbind.confd-r1
new file mode 100644
index 000000000..91cdc60c1
--- /dev/null
+++ b/pcr/openrc-net/ypbind.confd-r1
@@ -0,0 +1,4 @@
+# Config file for /etc/init.d/ypbind
+
+# Set any command line options you want to pass to ypbind.
+YPBIND_OPTS=""
diff --git a/pcr/openrc-net/ypbind.initd b/pcr/openrc-net/ypbind.initd
new file mode 100644
index 000000000..f227a4172
--- /dev/null
+++ b/pcr/openrc-net/ypbind.initd
@@ -0,0 +1,41 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypbind/files/ypbind.initd,v 1.6 2009/02/24 17:25:01 drizzt Exp $
+
+depend() {
+ need net portmap
+ use ypserv domainname
+}
+
+start() {
+ ebegin "Starting ypbind"
+ if [ -n "${YPBIND_OPTS}" ]; then
+ YOPTS="-- ${YPBIND_OPTS}"
+ fi
+ start-stop-daemon --start --quiet --exec /usr/sbin/ypbind ${YOPTS}
+ local ret=$?
+ if [ $ret -eq 0 ] ; then
+ notfound=1
+ for i in 0 1 2 3 4 5 6 7 8 9
+ do
+ ypwhich >/dev/null 2>&1 && { notfound=0; break; }
+ sleep 1
+ done
+ if [ $notfound -eq 1 ] ; then
+ eend 1 "No NIS server found"
+ else
+ eend 0
+ fi
+ else
+ eend $ret
+ fi
+}
+
+stop() {
+ ebegin "Stopping ypbind"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/ypbind
+ eend $?
+ # Remove binding files, if ypbind "forgets" it
+ rm -f /var/yp/binding/*
+}
diff --git a/pcr/openrc-net/ypserv b/pcr/openrc-net/ypserv
new file mode 100644
index 000000000..be1dc42e1
--- /dev/null
+++ b/pcr/openrc-net/ypserv
@@ -0,0 +1,23 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/ypserv,v 1.4 2006/04/10 20:00:18 eradicator Exp $
+
+depend() {
+ need net portmap
+ use domainname
+}
+
+start() {
+ ebegin "Starting NIS Server"
+ YOPTS=""
+ if [ -n "${YPSERV_OPTS}" ]; then YOPTS="-- ${YPSERV_OPTS}"; fi
+ start-stop-daemon --start --quiet --exec /usr/sbin/ypserv ${YOPTS}
+ eend $?
+}
+
+stop() {
+ ebegin "Stopping NIS Server"
+ start-stop-daemon --stop --quiet --exec /usr/sbin/ypserv
+ eend $?
+}
diff --git a/pcr/openrc-net/ypserv.confd b/pcr/openrc-net/ypserv.confd
new file mode 100644
index 000000000..0ae9756dc
--- /dev/null
+++ b/pcr/openrc-net/ypserv.confd
@@ -0,0 +1,4 @@
+# Config file for /etc/init.d/ypserv
+
+# Command line options to pass to ypserv:
+YPSERV_OPTS=""