diff options
Diffstat (limited to 'libre-testing/uboot4extlinux-sunxi/PKGBUILD')
| -rw-r--r-- | libre-testing/uboot4extlinux-sunxi/PKGBUILD | 526 |
1 files changed, 526 insertions, 0 deletions
diff --git a/libre-testing/uboot4extlinux-sunxi/PKGBUILD b/libre-testing/uboot4extlinux-sunxi/PKGBUILD new file mode 100644 index 000000000..b849e9764 --- /dev/null +++ b/libre-testing/uboot4extlinux-sunxi/PKGBUILD @@ -0,0 +1,526 @@ +# U-Boot: sunXi +# Contributor: Isaac David <isacdaavid@at@isacdaavid@dot@info> +# Contributor: André Silva <emulatorman@hyperbola.info> +# Contributor: Timothy Redaelli <timothy.redaelli@gmail.com> +# Contributor: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> +# Maintainer: Parabola Hackers <dev@lists.parabola.nu> + +# To add a new board (that uses an Allwinner System On a Chip) you need: +# - The package name. Example: uboot4extlinux-a20-olinuxino_micro +# - The u-boot configuration. Example: A20-OLinuXino_MICRO_defconfig +# - The name of the board(s). Example: A20 OLinuXino Micro +# A single package / u-boot configuration sometimes support multiple +# boards and the configuration name doesn't always have the boards names +# in it. Example: uboot4extlinux-am335x_bone supports various BeagleBones, +# the AM335x GP EVM and the EVM SK all in one u-boot binary and package. +# - If relevant, the packages it replaces, if there are older u-boot packages +# also supporting that board. Example:uboot-a20-olinuxino-micro +# +# Ideally we'd like to enable people to only add these 4 variables in this +# package to add a new board. These 4 variables could go in something like +# a CVS file that is parsed, but that would require to be able to dynamically +# define packages, but even if eval package_{$_pkgname}() { [...] } works, +# it doesn't make that package function visible to makepkg. +# +# Because of that, contributors wanting to add new boards will have to search +# for example of the information mentioned above and add it in the PKGBUILD +# for their boards. +# +# After adding a new board in this PKGBUILD, to get the board officially +# supported by Parabola.you also need to create a page for it in the +# Parabola wiki for that board and update the ARM installation guide to +# point to it when relevant. Examples of that are available for other +# boards in the ARM installation guide. + +_upstream_name=u-boot-libre +pkgbase=uboot4extlinux-sunxi +pkgname=("${pkgbase}" + 'uboot4extlinux-a10-olinuxino-lime' + 'uboot4extlinux-a10s-olinuxino-m' + 'uboot4extlinux-a13-olinuxino' + 'uboot4extlinux-a13-olinuxinom' + 'uboot4extlinux-a20-olinuxino-lime' + 'uboot4extlinux-a20-olinuxino-lime2' + 'uboot4extlinux-a20-olinuxino-lime2-emmc' + 'uboot4extlinux-a20-olinuxino_micro' + 'uboot4extlinux-bananapi' + 'uboot4extlinux-bananapro' + 'uboot4extlinux-chip' + 'uboot4extlinux-cubieboard' + 'uboot4extlinux-cubieboard2' + 'uboot4extlinux-cubietruck' + 'uboot4extlinux-linksprite_pcduino' + 'uboot4extlinux-linksprite_pcduino3' + 'uboot4extlinux-linksprite_pcduino3_nano' + 'uboot4extlinux-orangepi_2' + 'uboot4extlinux-orangepi_one' + 'uboot4extlinux-orangepi_pc' + 'uboot4extlinux-orangepi_plus') + +_uboot_ver=2022.04 # version of the upstream u-boot source code +_ubootlibre_rev=r1 # revision of the u-boot-libre deblob script + +pkgver="${_uboot_ver}" +pkgrel="${_ubootlibre_rev}.parabola3" + +arch=('armv7h' 'i686' 'x86_64') +url="https://libreboot.org/docs/maintain/#resourcesscriptsbuildreleaseu-boot-libre" +license=('GPL') +makedepends=('bc' 'dtc' 'python' 'python-setuptools' 'python2' 'swig') +makedepends_i686+=('arm-none-eabi-gcc') +makedepends_ppc64le+=('arm-none-eabi-gcc') +makedepends_x86_64+=('arm-none-eabi-gcc') + +_mirror="https://mirrors.mit.edu/libreboot/" # use a mirror per libreboot's request +source=("${_mirror}/${_upstream_name}/${_uboot_ver}-${_ubootlibre_rev}/${_upstream_name}-${_uboot_ver}-${_ubootlibre_rev}.tar.xz") +source+=('extlinux.conf' + "${pkgbase}.hook.in" + 'install-uboot4extlinux.sh.in' + "generate-${pkgbase}-install-text.sh") + +# TODO: this checksum doesn't correspond to the one in +# tests/u-boot-libre.sha512. This means that the tarball is not +# reproducible yet. According to diffoscope, the only changes so +# far seems to be some permissions changes: +# │ -drwxr-xr-x [...] 0 1969-12-31 23:00:00.000000 u-boot-libre-2021.07-r1/ +# │ +drwxrwxr-x [...] 0 1969-12-31 23:00:00.000000 u-boot-libre-2021.07-r1/ +# │ --rw-r--r-- [...] 16576 1969-12-31 23:00:00.000000 u-boot-libre-2021.07-r1/.azure-pipelines.yml +# │ +-rw-rw-r-- [...] 16576 1969-12-31 23:00:00.000000 u-boot-libre-2021.07-r1/.azure-pipelines.yml +# I've not checked if some files were added or not but at least it +# shows only diffs like the one above, and it doesn't show any file +# content diff. +# TODO: Check the signatures of the released files, not just the content +# TODO: We also need to look into drivers/dma/MCD_tasks.c. The debian +# version of u-boot removes it. It's some data that looks like +# code, so while there is a valid license, we might lack +# corresponding source code if it's really some code. The debian +# commits might have more information about it. +sha512sums=('b816667988210c4f5e0e219fcf633fe0c599ced74568a2924afc8df14bede52ce0c9615ff27eae3ecf194d41a87d04231f099c90beece18028ee5890a3911669') +sha512sums+=('dcbcbc8d196c7dd7db1a8a30dfa8c9ece5d241580bdf593df5fa2de527f0dfea2bb76ff9bfe49fb1e9d631bd1e4b95c828a41cfb38dc2ddc9553e18a54a521f0' + '766b28c45218746672d3e802c16f2c1283d708b43edf0a42cb569c1cfa6d6d3f318d5da91efcc832303dcc2175ee23528d15891010c187dea4c6828e82596be3' + '1ecb7b932bb0b097cac2cdfabbf7faa1601a556b49782f68109be07e49bff62d4515d6492ad1c72f471cdc7b4e1c2d8750e3494fcb0fc93108e6e5bd4e82aedb' + 'b0e8b0ec7f742778ffed486cf529d56d550db48354a4251867078fda8e5a28c8938f6c005225042744c1117a6abb3843e632234b8fd73d8bfdd9c590b0165e4c') + +# supported boards +_defconfigs=('A10-OLinuXino-Lime_defconfig' + 'A10s-OLinuXino-M_defconfig' + 'A13-OLinuXino_defconfig' + 'A13-OLinuXinoM_defconfig' + 'A20-OLinuXino-Lime_defconfig' + 'A20-OLinuXino-Lime2_defconfig' + 'A20-OLinuXino-Lime2-eMMC_defconfig' + 'A20-OLinuXino_MICRO_defconfig' + 'Bananapi_defconfig' + 'Bananapro_defconfig' + 'CHIP_defconfig' + 'Cubieboard_defconfig' + 'Cubieboard2_defconfig' + 'Cubietruck_defconfig' + 'Linksprite_pcDuino_defconfig' + 'Linksprite_pcDuino3_defconfig' + 'Linksprite_pcDuino3_Nano_defconfig' + 'orangepi_2_defconfig' + 'orangepi_one_defconfig' + 'orangepi_pc_defconfig' + 'orangepi_plus_defconfig') + +# Offset at which to install u-boot +u_boot_with_spl_offset=8192 + +_nr_targets=0 +for _defconfig in ${_defconfigs[@]}; do + _nr_targets=$(expr ${_nr_targets} + 1) +done + +_get_target_name() +{ + _defconfig="$1" + + echo ${_defconfig} | \ + sed 's/_defconfig$//' | \ + awk '{print tolower($0)}' +} + +_get_target_destdir() +{ + _defconfig="$1" + + _target_name="$(_get_target_name ${_defconfig})" + + echo "build/uboot4extlinux-${_target_name}" +} + +_build_uboot_target() +{ + _defconfig="$1" + + _destdir="$(_get_target_destdir ${_defconfig})" + _target_name="$(_get_target_name ${_defconfig})" + + unset CFLAGS CXXFLAGS LDFLAGS + + local make_vars=( ARCH=arm ) + make ${make_vars[*]} distclean + make ${make_vars[*]} ${_defconfig} + + make_vars+=( EXTRAVERSION=-${pkgrel} ) + [[ "$CARCH" != armv7h ]] && make_vars+=( CROSS_COMPILE=arm-none-eabi- ) || : + echo 'CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre"' >> .config + make ${make_vars[*]} + + echo "==> Installing ${_target_name} to ${_destdir}" + install -d ${_destdir} + mv -f u-boot-sunxi-with-spl.bin "${_destdir}" +} + +# TODO: We need to fix the timestamps upstream to a valid date +# (like the first January 1970at 01:00:00 CET) or something derived +# from the release version somehow. Else we have the build log spammed +# with errors like that: +# make: scripts/Makefile.extrawarn: Timestamp out of range; +# substituting 1970-01-01 00:59:59.999999999 +# TODO: While we're at it we could export SOURCE_DATE_SPOCH to try to +# make the u-boot package reporducible. +prepare() +{ + cd "${srcdir}"/u-boot-v${_uboot_ver}-${_ubootlibre_rev} + find -print0 | xargs -0r touch --no-dereference --date="@${SOURCE_DATE_EPOCH}" +} + +build() +{ + cd "${srcdir}"/u-boot-v${_uboot_ver}-${_ubootlibre_rev} + + _target_nr=0 + for _defconfig in ${_defconfigs[@]}; do + _target_nr=$(expr ${_target_nr} + 1) + _target_name="$(_get_target_name ${_defconfig})" + + echo "==> Building ${_target_name} " \ + "[${_target_nr} of ${_nr_targets} targets]" + + _build_uboot_target "${_defconfig}" + done +} + +_check_uboot_target() +{ + _defconfig="$1" + + _image="$(_get_target_destdir ${_defconfig})/u-boot-sunxi-with-spl.bin" + _image_size="$(du --bytes --apparent-size ${_image} | awk '{print $1}')" + _offset="${u_boot_with_spl_offset}" + + _image_end=$(expr ${_image_size} + ${_offset}) + + # This test comes from install-uboot4extlinux.sh.in + if [ ${_image_end} -gt $(expr 1024 \* 1024) ] ; then + echo "Error: ${_image} is too big:" + echo " offset: ${_offset}" + echo " size: ${_image_size}" + echo " By default, "\ + "partitioing tools makes the first partition start at 1MiB" + echo " Instaling ${_image} "\ + "would overwrite that first partition (if it's present)." + + false # Fail the test + fi +} + +check() +{ + cd "${srcdir}"/u-boot-v${_uboot_ver}-${_ubootlibre_rev} + + _target_nr=0 + for _defconfig in ${_defconfigs[@]}; do + _target_nr=$(expr ${_target_nr} + 1) + _target_name="$(_get_target_name ${_defconfig})" + + echo "==> Testing target ${_target_name} " \ + "[${_target_nr} of ${_nr_targets} targets]" + _check_uboot_target "${_defconfig}" + done + +} + +_make_uboot_package() +{ + _pkgname="$1" + + if [ -n "${pkgdir}" ] ; then + cd "${srcdir}"/u-boot-v${_uboot_ver}-${_ubootlibre_rev} + + # Install the u-boot binary + install -d "${pkgdir}/usr/lib/u-boot/${_pkgname}/" + install -Dm644 "build/${_pkgname}/u-boot-sunxi-with-spl.bin" \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}" + + # Install the u-boot installation script + sed < "${srcdir}/install-uboot4extlinux.sh.in" > \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" \ + -e "s|@u_boot_with_spl[@]|/usr/lib/u-boot/${_pkgname}/u-boot-sunxi-with-spl.bin|g" \ + -e "s|@u_boot_with_spl_offset[@]|${u_boot_with_spl_offset}|g" + + chmod +x \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" + + # Install what is required for the pacman hook + install -d "${pkgdir}/usr/share/libalpm/hooks/" + sed < "${srcdir}/${pkgbase}.hook.in" > \ + "${pkgdir}/usr/share/libalpm/hooks/${_pkgname}.hook" \ + -e "s|@pkgname[@]|${_pkgname}|g" + + install -d "${pkgdir}/usr/share/doc/u-boot/${_pkgname}/" + # If we install several uboot4extlinux, we need a way to clearly + # separate each postinstall message. To do that we wrapped the + # text in an ASCII art square, but doing that is complicated when + # using sed as the package name as well as the installation script + # path both have variable length. + sh "${srcdir}/generate-${pkgbase}-install-text.sh" \ + "${_pkgname}" \ + "${pkgbase}" \ + "/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" > \ + "${pkgdir}/usr/share/doc/u-boot/${_pkgname}/install-uboot4extlinux.txt" + fi +} + +_make_pkgdesc() +{ + board_name="$1" + echo "U-Boot with Extlinux support for ${board_name}" +} + +package_uboot4extlinux-sunxi() +{ + pkgdesc="Scripts for managing U-Boot installations for computers with Allwinner System On a Chip" + + depends=('uboot-tools') + + # Users are expected to use this as a base for /boot/extlinux/extlinux.conf + install -d "${pkgdir}/usr/lib/u-boot/${pkgname}/" + install -Dm644 \ + "${srcdir}/extlinux.conf" \ + "${pkgdir}/usr/lib/u-boot/${pkgname}/" +} + +package_uboot4extlinux-a10-olinuxino-lime() +{ + pkgdesc=$(_make_pkgdesc "A10 OLinuXino Lime") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a10s-olinuxino-m() +{ + pkgdesc=$(_make_pkgdesc "A10s OLinuXino Micro") + + replaces=('uboot4extlinux-a10s-olinuxino-micro') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a13-olinuxino() +{ + pkgdesc=$(_make_pkgdesc "A13 OLinuXino") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a13-olinuxinom() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-a13-olinuxino-micro") + + replaces=('uboot4extlinux-a13-olinuxino-micro') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a20-olinuxino-lime() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a20-olinuxino-lime2() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime2") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a20-olinuxino-lime2-emmc() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime2 with eMMC") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-a20-olinuxino_micro() +{ + pkgdesc=$(_make_pkgdesc "uboot-a20-olinuxino-micro") + + replaces=('uboot-a20-olinuxino-micro') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-bananapi() +{ + pkgdesc=$(_make_pkgdesc "Banana Pi") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-bananapro() +{ + pkgdesc=$(_make_pkgdesc "Banana Pro") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-chip() +{ + pkgdesc=$(_make_pkgdesc "C.H.I.P") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-cubieboard() +{ + pkgdesc=$(_make_pkgdesc "Cubieboard") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-cubieboard2() +{ + pkgdesc=$(_make_pkgdesc "Cubieboard 2") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-cubietruck() +{ + pkgdesc=$(_make_pkgdesc "Cubietruck") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-linksprite_pcduino() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino") + + replaces=('uboot4extlinux-pcduino') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-linksprite_pcduino3() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino3") + + replaces=('uboot4extlinux-pcduino3') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-linksprite_pcduino3_nano() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino3-nano") + + replaces=('uboot4extlinux-pcduino3-nano') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-orangepi_2() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi 2") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-orangepi_one() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi One") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-orangepi_pc() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi PC") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-orangepi_plus() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi Plus") + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} |