diff options
Diffstat (limited to 'libre-testing/uboot4extlinux-sunxi/u-boot-blobs.list')
| -rw-r--r-- | libre-testing/uboot4extlinux-sunxi/u-boot-blobs.list | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/libre-testing/uboot4extlinux-sunxi/u-boot-blobs.list b/libre-testing/uboot4extlinux-sunxi/u-boot-blobs.list new file mode 100644 index 000000000..ec6c20ee8 --- /dev/null +++ b/libre-testing/uboot4extlinux-sunxi/u-boot-blobs.list @@ -0,0 +1,185 @@ +arch/x86/dts/microcode/ + +# The license is nonfree because it contains the following: "Reverse +# engineering, decompilation, or disassembly of this software is not +# permitted." +Licenses/r8a779x_usb3.txt +drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h + +# The documentation contains instructions to download and install nonfree +# software. Note that if a board doesn't have such instructions it doesn't +# necessarily means that it can boot with only free software and viceversa. + +########### +# Amlogic # +########### +# Amlogic SOCs Usually have various nonfree components, like the first stages +# of the bootloaders and code that runs in TrustZone. They are most likely +# not signed. +# --------- +# TODO: List the nonfree software of specific documentation +doc/board/amlogic/beelink-gtkingpro.rst +doc/board/amlogic/beelink-gtking.rst +doc/board/amlogic/index.rst +doc/board/amlogic/khadas-vim2.rst +doc/board/amlogic/khadas-vim3l.rst +doc/board/amlogic/khadas-vim3.rst +doc/board/amlogic/khadas-vim.rst +doc/board/amlogic/libretech-ac.rst +doc/board/amlogic/libretech-cc.rst +doc/board/amlogic/nanopi-k2.rst +doc/board/amlogic/odroid-c2.rst +doc/board/amlogic/odroid-c4.rst +doc/board/amlogic/odroid-n2.rst +doc/board/amlogic/p200.rst +doc/board/amlogic/p201.rst +doc/board/amlogic/p212.rst +doc/board/amlogic/q200.rst +doc/board/amlogic/s400.rst +doc/board/amlogic/sei510.rst +doc/board/amlogic/sei610.rst +doc/board/amlogic/u200.rst +doc/board/amlogic/w400.rst +doc/board/amlogic/wetek-core2.rst + +######### +# Linux # +######### +# Has intructions to build Linux which is not FSDG compliant. +# TODO: Use linux-libre instead, especially because documentation about vboot +# could be interesting to have. Vboot is a chain of trust that can work with +# only free software. The hardware root of trust can be created by booting on +# a flash chip whose security registers are configured to set the first +# bootloader component read-only. +doc/uImage.FIT/beaglebone_vboot.txt +# Steers very strongly users into using Linux as it shows that the only tested +# kernels are Broadcom forks of Linux. We would need to have linux-libre +# versions of these or test it with stock linux-libre instead. +doc/README.bcm7xxx + +############ +# Mediatek # +############ +# The instructions uses binaries that lack any corresponding source code. +doc/README.mediatek + +############# +# NXP I.MX8 # +############# +# I.MX8 SOCs require a nonfree firmware for the DDR4 controller. In some +# documentation, I didn't find that requirement mentioned, but instead +# there are still nonfree files mentioned. So I assume that they might +# somehow contain code for that nonfree DDR4 controller, but it might be +# worth checking if it's the case or not. The DDR4 controller firmware is not +# signed. In addition the I.MX8 HDMI controller requires a signed firmware. +# ----------- +# nonfree DDR4 controller firmware +doc/board/freescale/imx8mp_evk.rst +# nonfree DDR4 controller and HDMI firmwares +doc/board/freescale/imx8mq_evk.rst +# nonfree DDR4 controller firmware +doc/board/freescale/imx8mn_evk.rst +# nonfree imx-sc-firmware-1.2.7.1.bin and imx-seco-2.3.1.bin firmwares +doc/board/freescale/imx8qxp_mek.rst +# nonfree DDR4 controller firmware +doc/board/freescale/imx8mm_evk.rst +# nonfree imx-sc-firmware-1.1.bin and firmware-imx-8.0.bin firmwares +doc/board/advantech/imx8qm-rom7720-a1.rst +# TODO +doc/board/verdin-imx8mm.rst +doc/board/toradex/colibri-imx8x.rst +doc/board/toradex/apalix-imx8x.rst +doc/board/toradex/apalix-imx8.rst + +####################### +# NXP nonfree srktool # +####################### +# The SRK tool is a tool that is involved in one way or another with +# authenticated or encrypted boot. I'm unsure if free software replacements +# exists or if could easily be replaced with a free software implementation. +# In any case the I.MX6 and I.MX5 can proabably be setup for encrypted or +# authenticated boot with free software tools. The first and second versions +# of the USB Armory has documentation on how to do that. +# --------------------- +doc/imx/board/toradex/colibri_imx7.rst +doc/imx/habv4/introduction_habv4.txt + +################## +# Samsung Exynos # +################## +# The instructions makes users nonfree components like a nonfree first stage +# bootloaders, and nonfree code that runs in TrustZone. +doc/README.odroid +# The instructions makes its users download an image and update u-boot in that +# image. Because of that, it's extremely likely that the images contains +# nonfree components that cannot even be redistributed in another form, and +# that the instructions uses that images because of that. +doc/README.s5p4418 + +##################### +# Texas Instruments # +##################### +# Users are expected to use nonfree tools and even sign an NDA to get access +# to them. +doc/README.ti-secure + +########### +# Unknown # +########### +# Everything looks free software, but the code still needs to be reviewed. +doc/board/microchip/mpfs_icicle.rst +# OP-TEE is under a free software license but its code needs to be reviewed. +doc/README.tee +# The tutorial has instructions to download a downstream u-boot, so it might +# have the same issues than u-boot itself if the u-boot is recent enough. +doc/chromium/run_vboot.rst + +####### +# x86 # +####### +# Unless the computer is supported by Libreboot, or that u-boot runs after +# some other nonfree boot software like a BIOS or UEFI, it's unlikely to be +# able to run with only free software. Though I'm pretty sure that some +# exceptions do exists, but they are probably not supported by u-boot. +# ----- +# nonfree Management Engine firmware, RAM intialization code, and video BIOS +doc/board/google/chromebook_link.rst +# nonfree SDRAM and hardware intialization code +doc/board/google/chromebook_coral.rst + +# nonfree FSP, video BIOS, Management Engine firmware +doc/board/intel/minnowmax.rst +# nonfree FSP, Chipset Micro Code (CMC), microcode +doc/board/intel/crownbay.rst + +# TODO: check +# board/intel/edison.rst +# Steers userstoward using nonfree FSP +board/intel/slimbootloader.rst + +# Steers users and developers toward using nonfree FSP +doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-m.txt + +# Steers users and developers toward using nonfree FSP +doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt + +############ +# Rockchip # +############ +# rkbin binaries without license nor source code +doc/board/rockchip/rockchip.rst + +# TODO: check the following files +# imx/common/mxs.txt +# README.armada-secureboot +# README.fdt-control +# README.fsl-ddr +# README.m54418twr +# README.marvell +# README.mpc85xxcds +# README.mpc85xx-sd-spi-boot +# README.OFT +# README.rmobile +# README.rockchip +# README.rockusb +# README.socfpga |