1 files changed, 0 insertions, 144 deletions
diff --git a/libre/mksyslinux/mksyslinux b/libre/mksyslinux/mksyslinux
deleted file mode 100755
index 96ad45133..000000000
--- a/libre/mksyslinux/mksyslinux
+++ /dev/null
@@ -1,144 +0,0 @@
-#! /bin/sh
-# Created by Tobias Powalowski <tpowa@archlinux.org>
-# Settings
-APPNAME=$(basename "${0}")
-CONFIG="/etc/mksyslinux.conf"
-export TEMPDIR=$(mktemp /tmp/mksyslinux.XXX)
-TMPDIR=$(mktemp -d /tmp/mksyslinux-image.XXX)
-BOOTDIRNAME=boot/syslinux
-
-usage ()
-{
-    echo "${APPNAME}: usage"
-    echo "WRITING TO DEVICE:"
-    echo "- PREPARATION: Your device must have a bootable first partition in FAT16 format!"
-    echo "- ATTENTION: The MBR of your DEVICE will be overwritten! You have been warned!"
-    echo ""
-    echo "CREATING AN IMAGE FILE:"
-    echo "- For creating an image file use the -i=IMAGEFILE switch"
-    echo "- use 'dd if=<yourimage> of=<yourdevice>' to write to your device afterwards."
-    echo ""
-    echo "PARAMETERS:"
-    echo "  -d=DEVICE        Your DEVICE first partition from /dev/xxx tree to install"
-    echo "  -i=IMAGENAME     Your IMAGENAME"
-    echo "  -c=CONFIG        Use CONFIG file. default: /etc/mksyslinux.conf"
-    echo "  -h               This message."
-    exit 1
-}
-
-[ "$1" == "" ] && usage && exit 1
-
-
-while [ $# -gt 0 ]; do
-	case $1 in
-		-c=*|--c=*) CONFIG="$(echo $1 | awk -F= '{print $2;}')" ;;
-		-d=*|--d=*) DEVICE="$(echo $1 | awk -F= '{print $2;}')" ;;
-		-i=*|--i=*) IMAGENAME="$(echo $1 | awk -F= '{print $2;}')" ;;
-		-h|--h|?) usage ;; 
-		*) usage ;;
-		esac
-	shift
-done
-
-if [ ! -f "${CONFIG}" ]; then
-	echo "config file '${CONFIG}' cannot be found, aborting..."
-    exit 1
-fi
-
-if [ "${IMAGENAME}" = "" ]; then
-	if [ "${DEVICE}" = "" ]; then 
-		echo "ERROR: No DEVICE name specified, please use the -d option"
-	 	exit 1
-	fi
-fi
-
-if ! [ $UID -eq 0 ]; then 
-	echo "ERROR: only works when run as root!"
-	exit 1
-fi
-
-. "${CONFIG}"
-# export for mkinitcpio
-[ -n "${APPENDBOOTMESSAGE}" ] && export APPENDBOOTMESSAGE
-[ -n "${APPENDBOOTMESSAGE_SYSLINUX}" ] && export APPENDBOOTMESSAGE_SYSLINUX
-[ -n "${APPENDOPTIONSBOOTMESSAGE}" ] && export APPENDOPTIONSBOOTMESSAGE
-
-MBRDEVICE="$(echo ${DEVICE} | sed -e 's/[0-9]//g')"
-
-export RUNPROGRAM="${APPNAME}"
-[ "${BOOTMESSAGE}" = "" ] && export BOOTMESSAGE=$(mktemp /tmp/bootmessage.XXXX)
-[ "${OPTIONSBOOTMESSAGE}" = "" ] && export OPTIONSBOOTMESSAGE=$(mktemp /tmp/optionsbootmessage.XXXX)
-export USEKERNEL=${VERSION}
-# begin script
-[ -e ${TEMPDIR} ] && rm -r ${TEMPDIR}
-mkdir -p ${TEMPDIR}
-echo ":: Mounting ${DEVICE} ..."
-if ! [ "${IMAGENAME}" = "" ]; then
-	modprobe loop
-else
-	mount ${DEVICE} ${TEMPDIR} || exit 1
-fi
-mkdir -p ${TEMPDIR}/${BOOTDIRNAME}
-# prepare syslinux bootloader
-install -m755 /usr/lib/syslinux/isolinux.bin ${TEMPDIR}/${BOOTDIRNAME}/isolinux.bin
-for i in /usr/lib/syslinux/*.c32; do
-    install -m644 $i ${TEMPDIR}/${BOOTDIRNAME}/$(basename $i)
-done
-install -m644 /usr/share/hwdata/pci.ids ${TEMPDIR}/${BOOTDIRNAME}/pci.ids
-
-# create syslinux.cfg
-echo ":: Creating syslinux.cfg ..."
-if [ "${SYSLINUXCFG}" = "" ]; then
-	[ -e ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg ] && rm ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "prompt ${PROMPT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "timeout ${TIMEOUT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "display boot.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "F1 boot.msg" >>  ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "F2 options.msg" >>  ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "default parabola"  >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "label parabola" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "kernel /boot/vmlinuz" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-	echo "append initrd=/boot/initrd.img ${KERNEL_BOOT_OPTIONS}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-else
-	sed "s|@@PROMPT@@|${PROMPT}|g;s|@@TIMEOUT@@|${TIMEOUT}|g;s|@@KERNEL_BOOT_OPTIONS@@|${KERNEL_BOOT_OPTIONS}|g" \
-		${SYSLINUXCFG} > ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-fi
-[ ! -s ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg ] && echo "No syslinux.cfg found" && exit 1
-echo ":: Calling mkinitcpio CONFIG=${MKINITCPIO_CONFIG} KERNEL=${VERSION} ..." 
-# generate initramdisk
-echo ":: Creating initramdisk ..."
-	mkinitcpio -c ${MKINITCPIO_CONFIG} -k ${VERSION} -g ${TEMPDIR}/boot/initrd.img
-echo ":: Using ${KERNEL} as image kernel ..."
-	install -m644 ${KERNEL} ${TEMPDIR}/boot/vmlinuz
-	install -m644 ${BOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/boot.msg
-	install -m644 ${OPTIONSBOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/options.msg
-	[ ! -s ${TEMPDIR}/${BOOTDIRNAME}/boot.msg ] && echo 'ERROR:no boot.msg found, aborting!' && exit 1
-	[ ! -s ${TEMPDIR}/${BOOTDIRNAME}/options.msg ] && echo 'ERROR:no options.msg found, aborting!' && exit 1
-if ! [ "${IMAGENAME}" = "" ]; then
-	# ext2 overhead's upper bound is 6%
-	# empirically tested up to 1GB
-	rootsize=$(du -bs ${TEMPDIR}|cut -f1)
-	IMGSZ=$(( (${rootsize}*106)/100/512 + 1)) # image size in sectors
-	# create the filesystem image file
-	dd if=/dev/zero of="${IMAGENAME}" bs=512 count="${IMGSZ}"
-	# create a filesystem on the image
-	mkfs.vfat "${IMAGENAME}"
-	mount -o loop ${IMAGENAME} ${TMPDIR} || exit 1
-	cp -r "${TEMPDIR}"/* "$TMPDIR"
-	umount ${TMPDIR}
-else
-	echo ":: Unmounting ${DEVICE} ..."
-	umount ${TEMPDIR} || exit 1
-fi
-if ! [ "${IMAGENAME}" = "" ]; then
-	echo ":: Installing SYSLINUX on ${IMAGENAME} ..."
-	syslinux ${IMAGENAME} && echo "Installation completed."
-else
-	echo ":: Installing MBR on ${MBRDEVICE} ..."
-	cat ${MBR} > ${MBRDEVICE}
-	echo ":: Installing SYSLINUX on ${DEVICE} ..."
-	syslinux -t offset ${DEVICE} && echo "Installation completed."
-fi
-# clean /tmp
-rm -r ${TEMPDIR}
-! [ ${IMAGENAME} = "" ] && rm -r ${TMPDIR}