summaryrefslogtreecommitdiff
path: root/libre/uboot4extlinux-imx
diff options
context:
space:
mode:
Diffstat (limited to 'libre/uboot4extlinux-imx')
-rw-r--r--libre/uboot4extlinux-imx/0001-board-tbs2910-disable-loadb-and-loads-commands.patch44
-rw-r--r--libre/uboot4extlinux-imx/0002-board-tbs2910-disable-CONFIG_GZIP.patch37
-rw-r--r--libre/uboot4extlinux-imx/0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch51
-rw-r--r--libre/uboot4extlinux-imx/0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch56
-rw-r--r--libre/uboot4extlinux-imx/0005-board-tbs2910-Enable-distro_boot-support.patch89
-rw-r--r--libre/uboot4extlinux-imx/0006-board-tbs2910-add-documentation.patch255
-rw-r--r--libre/uboot4extlinux-imx/PKGBUILD146
-rw-r--r--libre/uboot4extlinux-imx/extlinux.conf36
-rw-r--r--libre/uboot4extlinux-imx/tbs2910.h136
-rw-r--r--libre/uboot4extlinux-imx/tbs2910.install32
-rw-r--r--libre/uboot4extlinux-imx/tbs2910_defconfig84
-rw-r--r--libre/uboot4extlinux-imx/uboot4extlinux-imx.install35
12 files changed, 616 insertions, 385 deletions
diff --git a/libre/uboot4extlinux-imx/0001-board-tbs2910-disable-loadb-and-loads-commands.patch b/libre/uboot4extlinux-imx/0001-board-tbs2910-disable-loadb-and-loads-commands.patch
new file mode 100644
index 000000000..8f87c565c
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0001-board-tbs2910-disable-loadb-and-loads-commands.patch
@@ -0,0 +1,44 @@
+From 9fd573c8fb080b9f729015705b489d856904445b Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:19 +0200
+Subject: [PATCH 1/6] board: tbs2910: disable loadb and loads commands
+
+The loadb and loads commands are not needed for booting.
+
+There are also more reliable and faster alternatives to
+loadb and loads that can be used with the current configuration.
+
+As that the resulting image is already very close to the
+size limit, removing the loadb and loads commands shouldn't
+hurt.
+
+With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola
+GNU/Linux distribution we have the following size
+reduction:
+- text: 6733 bytes
+- data: 116 bytes
+- bss: 1172 bytes
+- total: 8021 bytes
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Acked-by: Soeren Moch <smoch@web.de>
+---
+ configs/tbs2910_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
+index 2ff0e160f7..2623eb73cd 100644
+--- a/configs/tbs2910_defconfig
++++ b/configs/tbs2910_defconfig
+@@ -28,6 +28,8 @@ CONFIG_SYS_MEMTEST_START=0x10000000
+ CONFIG_SYS_MEMTEST_END=0x2f400000
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_I2C=y
++# CONFIG_CMD_LOADB is not set
++# CONFIG_CMD_LOADS is not set
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_PART=y
+ CONFIG_CMD_PCI=y
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/0002-board-tbs2910-disable-CONFIG_GZIP.patch b/libre/uboot4extlinux-imx/0002-board-tbs2910-disable-CONFIG_GZIP.patch
new file mode 100644
index 000000000..a77cdae6d
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0002-board-tbs2910-disable-CONFIG_GZIP.patch
@@ -0,0 +1,37 @@
+From b3e5d2937972a4385ff665366253244b25f0c0a2 Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:20 +0200
+Subject: [PATCH 2/6] board: tbs2910: disable CONFIG_GZIP
+
+As that the resulting image is already very close to the
+size limit, and that CONFIG_GZIP is not strictly required,
+removing it shouldn't hurt.
+
+With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola
+GNU/Linux distribution we have the following size
+reduction:
+- text: 9752
+- data: 0
+- bss: 16
+- total: 9768
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Acked-by: Soeren Moch <smoch@web.de>
+---
+ configs/tbs2910_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
+index 2623eb73cd..cc459e6de6 100644
+--- a/configs/tbs2910_defconfig
++++ b/configs/tbs2910_defconfig
+@@ -88,5 +88,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
+ CONFIG_I2C_EDID=y
+ CONFIG_VIDEO_IPUV3=y
+ CONFIG_VIDEO=y
++# CONFIG_GZIP is not set
+ CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
+ # CONFIG_EFI_LOADER is not set
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch b/libre/uboot4extlinux-imx/0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch
new file mode 100644
index 000000000..7c59f3ccf
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch
@@ -0,0 +1,51 @@
+From 0c7550f03a67d9fd2b67e4c299f6d8908e2c7d5b Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:21 +0200
+Subject: [PATCH 3/6] board: tbs2910: move CONFIG_BOOTCOMMAND from header to
+ defconfig
+
+This doesn't affect the size of the image: with
+arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux
+distribution, the text, data, bss and total sizes remain
+unchanged.
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Reviewed-by: Soeren Moch <smoch@web.de>
+---
+ configs/tbs2910_defconfig | 2 ++
+ include/configs/tbs2910.h | 8 --------
+ 2 files changed, 2 insertions(+), 8 deletions(-)
+
+diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
+index cc459e6de6..d14ff45615 100644
+--- a/configs/tbs2910_defconfig
++++ b/configs/tbs2910_defconfig
+@@ -10,6 +10,8 @@ CONFIG_PRE_CON_BUF_ADDR=0x7c000000
+ CONFIG_CMD_HDMIDETECT=y
+ CONFIG_AHCI=y
+ CONFIG_BOOTDELAY=3
++CONFIG_USE_BOOTCOMMAND=y
++CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
+ CONFIG_USE_PREBOOT=y
+ CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
+ CONFIG_PRE_CONSOLE_BUFFER=y
+diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
+index 7376b91f55..a230111251 100644
+--- a/include/configs/tbs2910.h
++++ b/include/configs/tbs2910.h
+@@ -100,12 +100,4 @@
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vga\0"
+
+-#define CONFIG_BOOTCOMMAND \
+- "mmc rescan; " \
+- "if run bootcmd_up1; then " \
+- "run bootcmd_up2; " \
+- "else " \
+- "run bootcmd_mmc; " \
+- "fi"
+-
+ #endif /* __TBS2910_CONFIG_H * */
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch b/libre/uboot4extlinux-imx/0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch
new file mode 100644
index 000000000..19e61a257
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch
@@ -0,0 +1,56 @@
+From e63ab4527ea4ee23de7ee3335d14ee597667b457 Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:22 +0200
+Subject: [PATCH 4/6] board: tbs2910_defconfig: Add support for booting general
+ purpose distributions
+
+This is needed to enable distro_boot support later on.
+
+Adding the necessary configuration to enable booting general
+purpose distributions is typically done by enabling
+CONFIG_DISTRO_DEFAULTS.
+
+However the resulting image size is is already very close to
+the size limit and PXE isn't strictly needed, so instead we
+made sure that all the configuration selected by
+CONFIG_DISTRO_DEFAULTS were selected, with the exception of
+PXE related configuration (CONFIG_BOOTP_PXE and
+CONFIG_CMD_PXE) that are both disabled.
+
+With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola
+GNU/Linux distribution, we have the following size
+differences:
+- text: +7526 bytes
+- data: +28 bytes
+- bss: -12 bytes
+- total: +7542 bytes
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Reviewed-by: Soeren Moch <smoch@web.de>
+---
+ configs/tbs2910_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
+index d14ff45615..fc9095c859 100644
+--- a/configs/tbs2910_defconfig
++++ b/configs/tbs2910_defconfig
+@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1
+ CONFIG_PRE_CON_BUF_ADDR=0x7c000000
+ CONFIG_CMD_HDMIDETECT=y
+ CONFIG_AHCI=y
++CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_BOOTDELAY=3
+ CONFIG_USE_BOOTCOMMAND=y
+ CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
+@@ -43,6 +44,7 @@ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_CACHE=y
+ CONFIG_CMD_TIME=y
++CONFIG_CMD_SYSBOOT=y
+ CONFIG_CMD_EXT2=y
+ CONFIG_CMD_EXT4=y
+ CONFIG_CMD_EXT4_WRITE=y
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/0005-board-tbs2910-Enable-distro_boot-support.patch b/libre/uboot4extlinux-imx/0005-board-tbs2910-Enable-distro_boot-support.patch
new file mode 100644
index 000000000..184da5de4
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0005-board-tbs2910-Enable-distro_boot-support.patch
@@ -0,0 +1,89 @@
+From 9658884f3d923ab266903fd18ee7ff6ecf4ff096 Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:24 +0200
+Subject: [PATCH 5/6] board: tbs2910: Enable distro_boot support.
+
+This keeps the compatibility with the old bootcmd.
+
+The fdtfile environment variable also needed to be set to
+imx6q-tbs2910.dtb to enable booting mainline kernels
+otherwise with extlinux.conf it tries to load
+mx6-tbs2910.dtb instead.
+
+With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola
+GNU/Linux distribution, we have the following size
+differences:
+- text: +2041 bytes
+- data: 0 bytes
+- bss: 0 bytes
+- total: +2041 bytes
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Reviewed-by: Soeren Moch <smoch@web.de>
+---
+ configs/tbs2910_defconfig | 3 ++-
+ include/configs/tbs2910.h | 18 ++++++++++++++++++
+ 2 files changed, 20 insertions(+), 1 deletion(-)
+
+diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
+index fc9095c859..fbd2293add 100644
+--- a/configs/tbs2910_defconfig
++++ b/configs/tbs2910_defconfig
+@@ -12,11 +12,12 @@ CONFIG_AHCI=y
+ CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_BOOTDELAY=3
+ CONFIG_USE_BOOTCOMMAND=y
+-CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi"
++CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi"
+ CONFIG_USE_PREBOOT=y
+ CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
+ CONFIG_PRE_CONSOLE_BUFFER=y
+ CONFIG_SUPPORT_RAW_INITRD=y
++CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
+ CONFIG_BOUNCE_BUFFER=y
+ CONFIG_BOARD_EARLY_INIT_F=y
+ CONFIG_HUSH_PARSER=y
+diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
+index a230111251..17de122852 100644
+--- a/include/configs/tbs2910.h
++++ b/include/configs/tbs2910.h
+@@ -76,6 +76,7 @@
+ #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
++ BOOTENV \
+ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
+ "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
+ "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
+@@ -92,6 +93,13 @@
+ "bootm 0x10800000 0x10d00000\0" \
+ "console=ttymxc0\0" \
+ "fan=gpio set 92\0" \
++ "fdt_addr=0x13000000\0" \
++ "fdt_addr_r=0x13000000\0" \
++ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
++ "kernel_addr_r=0x10008000\0" \
++ "pxefile_addr_r=0x10008000\0" \
++ "ramdisk_addr_r=0x18000000\0" \
++ "scriptaddr=0x14000000\0" \
+ "set_con_serial=setenv stdout serial; " \
+ "setenv stderr serial\0" \
+ "set_con_hdmi=setenv stdout serial,vga; " \
+@@ -100,4 +108,14 @@
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vga\0"
+
++/* Enable distro boot */
++#define BOOT_TARGET_DEVICES(func) \
++ func(MMC, mmc, 0) \
++ func(MMC, mmc, 1) \
++ func(MMC, mmc, 2) \
++ func(SATA, sata, 0) \
++ func(USB, usb, 0)
++
++#include <config_distro_bootcmd.h>
++
+ #endif /* __TBS2910_CONFIG_H * */
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/0006-board-tbs2910-add-documentation.patch b/libre/uboot4extlinux-imx/0006-board-tbs2910-add-documentation.patch
new file mode 100644
index 000000000..6b78b7466
--- /dev/null
+++ b/libre/uboot4extlinux-imx/0006-board-tbs2910-add-documentation.patch
@@ -0,0 +1,255 @@
+From f3767bcb31d0ce5c6381d5f6c33a951774ee6d41 Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Sat, 30 May 2020 05:24:25 +0200
+Subject: [PATCH 6/6] board: tbs2910: add documentation
+
+This documents the u-boot installation procedure and the
+hardware in order to get started.
+
+Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+[trini: Add MAINTAINERS entry for doc file per Soeren's request]
+---
+ board/tbs/tbs2910/MAINTAINERS | 1 +
+ doc/board/index.rst | 1 +
+ doc/board/tbs/index.rst | 9 ++
+ doc/board/tbs/tbs2910.rst | 191 ++++++++++++++++++++++++++++++++++
+ 4 files changed, 202 insertions(+)
+ create mode 100644 doc/board/tbs/index.rst
+ create mode 100644 doc/board/tbs/tbs2910.rst
+
+diff --git a/board/tbs/tbs2910/MAINTAINERS b/board/tbs/tbs2910/MAINTAINERS
+index a3ad2f712a..1e3c0d0ece 100644
+--- a/board/tbs/tbs2910/MAINTAINERS
++++ b/board/tbs/tbs2910/MAINTAINERS
+@@ -4,4 +4,5 @@ S: Maintained
+ F: arch/arm/dts/imx6q-tbs2910.dts
+ F: board/tbs/tbs2910/
+ F: configs/tbs2910_defconfig
++F: doc/board/tbs/
+ F: include/configs/tbs2910.h
+diff --git a/doc/board/index.rst b/doc/board/index.rst
+index 01b233f737..bb4473152a 100644
+--- a/doc/board/index.rst
++++ b/doc/board/index.rst
+@@ -18,5 +18,6 @@ Board-specific doc
+ rockchip/index
+ sifive/index
+ st/index
++ tbs/index
+ toradex/index
+ xilinx/index
+diff --git a/doc/board/tbs/index.rst b/doc/board/tbs/index.rst
+new file mode 100644
+index 0000000000..b677bc624f
+--- /dev/null
++++ b/doc/board/tbs/index.rst
+@@ -0,0 +1,9 @@
++.. SPDX-License-Identifier: GPL-2.0+
++
++TBS
++===
++
++.. toctree::
++ :maxdepth: 2
++
++ tbs2910
+diff --git a/doc/board/tbs/tbs2910.rst b/doc/board/tbs/tbs2910.rst
+new file mode 100644
+index 0000000000..e97f2b6e61
+--- /dev/null
++++ b/doc/board/tbs/tbs2910.rst
+@@ -0,0 +1,191 @@
++TBS2910 Matrix ARM miniPC
++=========================
++
++Building
++--------
++To build u-boot for the TBS2910 Matrix ARM miniPC, you can use the following
++procedure:
++
++First add the ARM toolchain to your PATH
++
++Then setup the ARCH and cross compilation environment variables.
++
++When this is done you can then build u-boot for the TBS2910 Matrix ARM miniPC
++with the following commands:
++
++.. code-block:: none
++
++ make mrproper
++ make tbs2910_defconfig
++ make
++
++Once the build is complete, you can find the resulting image as u-boot.imx in
++the current directory.
++
++UART
++----
++The UART voltage is at 3.3V and its settings are 115200bps 8N1
++
++BOOT/UPDATE boot switch:
++------------------------
++The BOOT/UPDATE switch (SW11) is connected to the BOOT_MODE0 and
++BOOT_MODE1 SoC pins. It has "BOOT" and "UPDATE" markings both on
++the PCB and on the plastic case.
++
++When set to the "UPDATE" position, the SoC will use the "Boot From Fuses"
++configuration, and since BT_FUSE_SEL is 0, this makes the SOC jump to serial
++downloader.
++
++When set in the "BOOT" position, the SoC will use the "Internal boot"
++configuration, and since BT_FUSE_SEL is 0, it will then use the GPIO pins
++for the boot configuration.
++
++SW6 binary DIP switch array on the PCB revision 2.1:
++----------------------------------------------------
++On that PCB revision, SW6 has 8 positions.
++
++Switching a position to ON sets the corresponding
++register to 1.
++
++See the following table for a correspondence between the switch positions and
++registers:
++
++=============== ============
++Switch position Register
++=============== ============
++1 BOOT_CFG2[3]
++2 BOOT_CFG2[4]
++3 BOOT_CFG2[5]
++4 BOOT_CFG2[6]
++5 BOOT_CFG1[4]
++6 BOOT_CFG1[5]
++7 BOOT_CFG1[6]
++8 BOOT_CFG1[7]
++=============== ============
++
++For example:
++
++ - To boot from the eMMC: 1:ON , 2:ON, 3:ON, 4:OFF, 5:OFF, 6:ON, 7:ON, 8:OFF
++ - To boot from the microSD slot: 1: ON, 2: OFF, 3: OFF, 4: OFF, 5:OFF, 6:OFF,
++ 7:ON, 8:OFF
++ - To boot from the SD slot: 1: OFF, 2: ON, 3: OFF, 4: OFF, 5:OFF, 6:OFF, 7:ON,
++ 8:OFF
++ - To boot from SATA: 1: OFF, 2: OFF, 3: OFF, 4: OFF, 5:OFF, 6:ON, 7:OFF, 8:OFF
++
++You can refer to the BOOT_CFG registers in the I.MX6Q reference manual for
++additional details.
++
++SW6 binary DIP switch array on the PCB revision 2.3:
++----------------------------------------------------
++On that PCB revision, SW6 has only 4 positions.
++
++Switching a position to ON sets the corresponding
++register to 1.
++
++See the following table for a correspondence between the switch positions and
++registers:
++
++=============== ============
++Switch position Register
++=============== ============
++1 BOOT_CFG2[3]
++2 BOOT_CFG2[4]
++3 BOOT_CFG2[5]
++4 BOOT_CFG1[5]
++=============== ============
++
++For example:
++
++- To boot from the eMMC: 1:ON, 2:ON, 3:ON, 4:ON
++- To boot from the microSD slot: 1:ON, 2:OFF, 3:OFF, 4:OFF
++- To boot from the SD slot: 1:OFF, 2:ON, 3:OFF, 4:OFF
++
++You can refer to the BOOT_CFG registers in the I.MX6Q reference manual for
++additional details.
++
++Loading u-boot from USB:
++------------------------
++If you need to load u-boot from USB, you can use the following instructions:
++
++First build imx_usb_loader, as we will need it to load u-boot from USB. This
++can be done with the following commands:
++
++.. code-block:: none
++
++ git clone git://github.com/boundarydevices/imx_usb_loader.git
++ cd imx_usb_loader
++ make
++
++This will create the resulting imx_usb binary.
++
++When this is done, you can copy the u-boot.imx image that you built earlier
++in in the imx_usb_loader directory.
++
++You will then need to power off the TBS2910 Matrix ARM miniPC and make sure that
++the boot switch is set to "UPDATE"
++
++Once this is done you can connect an USB cable between the computer that will
++run imx_usb and the TBS2910 Matrix ARM miniPC.
++
++If you also need to access the u-boot console, you will also need to connect an
++UART cable between the computer running imx_usb and the TBS2910 Matrix ARM
++miniPC.
++
++Once everything is connected you can finally power on the TBS2910 Matrix ARM
++miniPC. The SoC will then jump to the serial download and wait for you.
++
++Finlay, you can load u-boot through USB with with the following command:
++
++.. code-block:: none
++
++ sudo ./imx_usb -v u-boot.imx
++
++The u-boot boot messages will then appear in the serial console.
++
++Install u-boot on the eMMC:
++---------------------------
++To install u-boot on the eMMC, you first need to boot the TBS2910 Matrix ARM
++miniPC.
++
++Once booted, you can flash u-boot.imx to mmcblk0boot0 with the
++following commands:
++
++.. code-block:: none
++
++ sudo echo 0 >/sys/block/mmcblk0boot0/force_ro
++ sudo dd if=u-boot.imx of=/dev/mmcblk0boot0 bs=1k seek=1; sync
++
++Note that the eMMC card node may vary, so adjust this as needed.
++
++Once the new u-boot version is installed, to boot on it you then need to power
++off the TBS2910 Matrix ARM miniPC.
++
++Once it is off, you need make sure that the boot switch is set to "BOOT" and
++that the SW6 switch is set to boot on the eMMC as described in the previous
++sections.
++
++If you also need to access the u-boot console, you will also need to connect an
++UART cable between the computer running imx_usb and the TBS2910 Matrix ARM
++miniPC.
++
++You can then power up the TBS2910 Matrix ARM miniPC and U-Boot messages will
++appear in the serial console.
++
++Booting a distribution:
++-----------------------
++When booting on the TBS2910 Matrix ARM miniPC, by default U-Boot will first try
++to boot from hardcoded offsets from the start of the eMMC. This is for
++compatibility with the stock GNU/Linux distribution.
++
++If that fails it will then try to boot from several interfaces using
++'distro_bootcmd': It will first try to boot from the microSD slot, then the
++SD slot, then the internal eMMC, then the SATA interface and finally the USB
++interface. For more information on how to configure your distribution to boot,
++see 'README.distro'.
++
++Links:
++------
++ - https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-SCH_rev2.1.pdf
++ - The schematics for the revision 2.1 of the TBS2910 Matrix ARM miniPC.
++ - https://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf - The
++ SoC reference manual for additional details on the BOOT_CFG registers.
+--
+2.27.0
+
diff --git a/libre/uboot4extlinux-imx/PKGBUILD b/libre/uboot4extlinux-imx/PKGBUILD
index b6b7652a7..f4bb6aec0 100644
--- a/libre/uboot4extlinux-imx/PKGBUILD
+++ b/libre/uboot4extlinux-imx/PKGBUILD
@@ -4,14 +4,25 @@
# Contributor: Timothy Redaelli <timothy.redaelli@gmail.com>
# Maintainer: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+# TODO:
+# - Add the following boards
+# - 'mx6cuboxi'
+# - 'nitrogen6q'
+# - 'udoo'
+# - 'usbarmory'
+# - 'wandboard'
+# - Improve the .install:
+# - Make it more generic: share the main part of the code.
+# - Check for the machine name with the device tree and ask for confirmation
+# if the machine is not the same but don't prevent users from installing
+# this bootloader on a totally different machine as the installation could
+# be done in a chroot or in other ways that packagers can't predict.
+# - Handle more than one boot device (microSD, eMMC, USB, etc)
+# - Point to the device documentation if there is some
+
pkgbase=uboot4extlinux-imx
-pkgname=('uboot4extlinux-mx6cuboxi'
- 'uboot4extlinux-nitrogen6q'
- 'uboot4extlinux-tbs2910'
- 'uboot4extlinux-udoo'
- 'uboot4extlinux-usbarmory'
- 'uboot4extlinux-wandboard')
-pkgver=2020.01
+pkgname=('uboot4extlinux-tbs2910')
+pkgver=2020.04
pkgrel=1
arch=('armv7h')
url="http://git.denx.de/u-boot.git/"
@@ -19,38 +30,40 @@ license=('GPL')
makedepends=('bc' 'dtc' 'python' 'python2' 'swig')
backup=(boot/extlinux/extlinux.conf)
source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- 'extlinux.conf'
- 'tbs2910.h'
- 'tbs2910_defconfig')
-sha256sums=('aa453c603208b1b27bd03525775a7f79b443adec577fdc6e8f06974025a135f1'
- 'SKIP'
- 'SKIP'
+ 'extlinux.conf')
+
+sha256sums=('fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372'
'SKIP')
-# TODO
-# boards=('mx6cuboxi'
-# 'nitrogen6q'
-# 'tbs2910'
-# 'udoo'
-# 'usbarmory'
-# 'wandboard')
+# Distro boot config and documentation for the TBS TBS2910
+# The patches are from the next branch of u-boot git
+# a bit after the v2020.07-rc4 tag. They should make it in 1 or two
+# u-boot release.
+source+=('0001-board-tbs2910-disable-loadb-and-loads-commands.patch'
+ '0002-board-tbs2910-disable-CONFIG_GZIP.patch'
+ '0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch'
+ '0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch'
+ '0005-board-tbs2910-Enable-distro_boot-support.patch'
+ '0006-board-tbs2910-add-documentation.patch')
+sha256sums+=('SKIP'
+ 'SKIP'
+ 'SKIP'
+ 'SKIP'
+ 'SKIP'
+ 'SKIP')
+
boards=('tbs2910')
prepare() {
cd u-boot-${pkgver}
- # TODO: send patches upstream
- # tbs2910.h: needed for generic distro booting
- # tbs2910_defconfig: needed for generic distro booting
- # and to fit within the size constraints
- cp -f ../tbs2910.h include/configs/tbs2910.h
- cp -f ../tbs2910_defconfig configs/tbs2910_defconfig
-
- for i in ${boards[@]}; do
- echo 'CONFIG_DISTRO_DEFAULTS=y' >> configs/${i}_defconfig
- echo 'CONFIG_SD_BOOT=y' >> configs/${i}_defconfig
- echo 'CONFIG_SATA_BOOT=y' >> configs/${i}_defconfig
- done
+ # TBS2910 patches
+ patch -Np1 -i ../0001-board-tbs2910-disable-loadb-and-loads-commands.patch
+ patch -Np1 -i ../0002-board-tbs2910-disable-CONFIG_GZIP.patch
+ patch -Np1 -i ../0003-board-tbs2910-move-CONFIG_BOOTCOMMAND-from-header-to.patch
+ patch -Np1 -i ../0004-board-tbs2910_defconfig-Add-support-for-booting-gene.patch
+ patch -Np1 -i ../0005-board-tbs2910-Enable-distro_boot-support.patch
+ patch -Np1 -i ../0006-board-tbs2910-add-documentation.patch
}
@@ -69,35 +82,9 @@ build() {
done
}
-package_uboot4extlinux-nitrogen6q() {
- pkgdesc="U-Boot with Extlinux support for the Boundary Devices i.MX6 Quad Nitrogen6"
- install=${pkgbase}.install
- provides=('uboot4extlinux-imx')
- conflicts=('uboot-nitrogen6q')
-
- install -d "${pkgdir}"/boot/extlinux
- install -d "${pkgdir}"/boot/u-boot/images/
- install -Dm644 bin_nitrogen6q/u-boot.imx "${pkgdir}"/boot/u-boot/images/
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-mx6cuboxi() {
- pkgdesc="U-Boot with Extlinux support for the SolidRun Cubox-i"
- install=${pkgbase}.install
- provides=('uboot4extlinux-imx')
- conflicts=('uboot-mx6_cubox-i')
-
- install -d "${pkgdir}"/boot/extlinux
- install -d "${pkgdir}"/boot/u-boot/images/
- install -Dm644 bin_mx6cuboxi/u-boot.imx "${pkgdir}"/boot/u-boot/images/
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
package_uboot4extlinux-tbs2910() {
pkgdesc="U-Boot with Extlinux support for the TBS2910 Matrix ARM mini PC"
- install=${pkgbase}.install
+ install=tbs2910.install
provides=('uboot4extlinux-imx')
install -d "${pkgdir}"/boot/extlinux
@@ -105,43 +92,8 @@ package_uboot4extlinux-tbs2910() {
install -Dm644 bin_tbs2910/u-boot.imx "${pkgdir}"/boot/u-boot/images/
install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-package_uboot4extlinux-udoo() {
- pkgdesc="U-Boot with Extlinux support for the Udoo Board"
- install=${pkgbase}.install
- provides=('uboot4extlinux-imx')
- conflicts=('uboot-udoo')
-
- install -d "${pkgdir}"/boot/extlinux
- install -d "${pkgdir}"/boot/u-boot/images/
- install -Dm644 udoo/u-boot.imx "${pkgdir}"/boot/u-boot/images/
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-usbarmory() {
- pkgdesc="U-Boot with Extlinux support for the Inverse Path USB armory"
- install=${pkgbase}.install
- provides=('uboot4extlinux-imx')
- conflicts=('uboot-usbarmory')
-
- install -d "${pkgdir}"/boot/extlinux
- install -d "${pkgdir}"/boot/u-boot/images/
- install -Dm644 usbarmory/u-boot.imx "${pkgdir}"/boot/u-boot/images/
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-wandboard() {
- pkgdesc="U-Boot with Extlinux support for the Wandboard"
- install=${pkgbase}.install
- provides=('uboot4extlinux-imx')
- conflicts=('uboot-wandboard')
-
- install -d "${pkgdir}"/boot/extlinux
- install -d "${pkgdir}"/boot/u-boot/images/
- install -Dm644 wandboard/u-boot.imx "${pkgdir}"/boot/u-boot/images/
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
+ # Package documentation as well
+ install -d "${pkgdir}"/usr/share/doc/u-boot
+ install -Dm644 u-boot-${pkgver}/doc/board/tbs/tbs2910.rst "${pkgdir}"/usr/share/doc/u-boot
}
diff --git a/libre/uboot4extlinux-imx/extlinux.conf b/libre/uboot4extlinux-imx/extlinux.conf
index c41ce605a..ddc3b7ac2 100644
--- a/libre/uboot4extlinux-imx/extlinux.conf
+++ b/libre/uboot4extlinux-imx/extlinux.conf
@@ -4,48 +4,18 @@ timeout 50
label Parabola GNU/Linux-libre, linux-libre kernel
kernel /boot/vmlinuz-linux-libre
- initrd /boot/initramfs-linux-libre-fallback.img
+ initrd /boot/initramfs-linux-libre.img
append root=/dev/mmcblk0p1 rw rootwait
fdtdir /boot/dtbs/linux-libre
label Parabola GNU/Linux-libre, linux-libre-lts kernel
kernel /boot/vmlinuz-linux-libre-lts
- initrd /boot/initramfs-linux-libre-lts-fallback.img
+ initrd /boot/initramfs-linux-libre-lts.img
append root=/dev/mmcblk0p1 rw rootwait
fdtdir /boot/dtbs/linux-libre-lts
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- initrd /boot/initramfs-linux-libre-lts-knock-fallback.img
- append root=/dev/mmcblk0p1 rw rootwait
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- initrd /boot/initramfs-linux-libre-hardened-fallback.img
- append root=/dev/mmcblk0p1 rw rootwait
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- initrd /boot/initramfs-linux-libre-lts-apparmor-fallback.img
- append root=/dev/mmcblk0p1 rw rootwait
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
label Parabola GNU/Linux-libre, linux-libre-pck kernel
kernel /boot/vmlinuz-linux-libre-pck
- initrd /boot/initramfs-linux-libre-pck-fallback.img
+ initrd /boot/initramfs-linux-libre-pck.img
append root=/dev/mmcblk0p1 rw rootwait
fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- initrd /boot/initramfs-linux-libre-rt-fallback.img
- append root=/dev/mmcblk0p1 rw rootwait
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- initrd /boot/initramfs-linux-libre-xtreme-fallback.img
- append root=/dev/mmcblk0p1 rw rootwait
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre/uboot4extlinux-imx/tbs2910.h b/libre/uboot4extlinux-imx/tbs2910.h
deleted file mode 100644
index 27166b719..000000000
--- a/libre/uboot4extlinux-imx/tbs2910.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 Soeren Moch <smoch@web.de>
- *
- * Configuration settings for the TBS2910 MatrixARM board.
- */
-
-#ifndef __TBS2910_CONFIG_H
-#define __TBS2910_CONFIG_H
-
-#define CONFIG_BOOTCOMMAND \
- "mmc rescan; " \
- "if run bootcmd_up1; then " \
- "run bootcmd_up2; " \
- "else " \
- "run bootcmd_mmc || run distro_bootcmd; " \
- "fi"
-
-#ifndef CONFIG_SPL_BUILD
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 2) \
- func(SATA, sata, 0) \
- func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-#endif
-
-#include "mx6_common.h"
-
-/* General configuration */
-
-#define CONFIG_MACH_TYPE 3980
-
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_IMX_THERMAL
-
-/* Physical Memory Map */
-#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END \
- (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
-
-#define CONFIG_SYS_BOOTMAPSZ 0x10000000
-
-/* Serial console */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
-
-/* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-#endif
-
-/* PCI */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
-#endif
-
-/* SATA */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#define CONFIG_SYS_64BIT_LBA
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#ifdef CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USBD_HS
-#endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#endif /* CONFIG_CMD_USB */
-
-/* Environment organization */
-#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
-#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "fdt_addr=0x13000000\0" \
- "fdt_addr_r=0x13000000\0" \
- "initrd_high=0xffffffff\0" \
- "kernel_addr_r=0x10008000\0" \
- "pxefile_addr_r=0x10008000\0" \
- "ramdisk_addr_r=0x18000000\0" \
- "scriptaddr=0x14000000\0" \
- "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
- "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
- "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
- "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
- "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
- "${bootargs_mmc3}\0" \
- "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
- "rdinit=/sbin/init enable_wait_mode=off\0" \
- "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
- "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
- "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
- "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
- "run bootargs_upd; " \
- "bootm 0x10800000 0x10d00000\0" \
- "console=ttymxc0\0" \
- "fan=gpio set 92\0" \
- "set_con_serial=setenv stdout serial; " \
- "setenv stderr serial\0" \
- "set_con_hdmi=setenv stdout serial,vga; " \
- "setenv stderr serial,vga\0" \
- "stderr=serial,vga\0" \
- "stdin=serial,usbkbd\0" \
- "stdout=serial,vga\0" \
- "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
- BOOTENV
-
-#endif /* __TBS2910_CONFIG_H * */
diff --git a/libre/uboot4extlinux-imx/tbs2910.install b/libre/uboot4extlinux-imx/tbs2910.install
new file mode 100644
index 000000000..f729bf0b7
--- /dev/null
+++ b/libre/uboot4extlinux-imx/tbs2910.install
@@ -0,0 +1,32 @@
+flash_instructions() {
+ echo "# echo 0 > /sys/block/mmcblk2boot0/force_ro"
+ echo "# dd if=/boot/u-boot/images/u-boot.imx of=/dev/mmcblk2boot0 bs=1k seek=1"
+}
+
+extlinux_warning() {
+ echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
+}
+
+flash_uboot() {
+ # For now we assume that users are flashing u-boot on the eMMC
+ # u-boot.img can also be loaded through USB for the frist boot with imx_usb_loader
+ echo "A new U-Boot version needs to be flashed."
+ echo "Do you want to flash it on the eMMC now? [y|N]"
+ read -r shouldwe
+ if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
+ echo 0 > /sys/block/mmcblk2boot0/force_ro
+ dd if=/boot/u-boot/images/u-boot.imx of=/dev/mmcblk2boot0 bs=1k seek=1
+ else
+ echo "You can do this later by running:"
+ flash_instructions
+ fi
+ extlinux_warning
+}
+
+post_install() {
+ flash_uboot
+}
+
+post_upgrade() {
+ flash_uboot
+}
diff --git a/libre/uboot4extlinux-imx/tbs2910_defconfig b/libre/uboot4extlinux-imx/tbs2910_defconfig
deleted file mode 100644
index 033fdd3cd..000000000
--- a/libre/uboot4extlinux-imx/tbs2910_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_TARGET_TBS2910=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_DM_GPIO=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_PRE_CON_BUF_ADDR=0x7c000000
-CONFIG_CMD_HDMIDETECT=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SATA_BOOT=y
-CONFIG_SD_BOOT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
-CONFIG_PRE_CONSOLE_BUFFER=y
-CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="Matrix U-Boot> "
-# CONFIG_CMD_BOOTM is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_FDT is not set
-# CONFIG_CMD_GO is not set
-CONFIG_CMD_ERASEENV=y
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_FUSE is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_PINMUX is not set
-CONFIG_CMD_SATA=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-# CONFIG_DM_WARN is not set
-CONFIG_DWC_AHSATA=y
-# CONFIG_BLOCK_CACHE is not set
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_DM_KEYBOARD=y
-# CONFIG_MXC_OCOTP is not set
-CONFIG_DM_MMC=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_DM_ETH=y
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-# CONFIG_RAM_ROCKCHIP_DEBUG is not set
-CONFIG_DM_RTC=y
-CONFIG_RTC_DS1307=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_KEYBOARD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TBS"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_I2C_EDID=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_REGEX is not set
-CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
-# CONFIG_EFI_LOADER is not set
diff --git a/libre/uboot4extlinux-imx/uboot4extlinux-imx.install b/libre/uboot4extlinux-imx/uboot4extlinux-imx.install
deleted file mode 100644
index b2860fca2..000000000
--- a/libre/uboot4extlinux-imx/uboot4extlinux-imx.install
+++ /dev/null
@@ -1,35 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/u-boot/images/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
-}
-
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/u-boot/images/u-boot.imx of=$root bs=512 seek=2
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-} \ No newline at end of file